summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-07-14nfp: flower: configure tunnel neighbour on cmsg rxTianyu Yuan1-5/+13
nfp_tun_write_neigh() function will configure a tunnel neighbour when calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx() (with no tunnel neighbour type) from firmware. When configuring IP on physical port as a tunnel endpoint, no operation will be performed after receiving the cmsg mentioned above. Therefore, add a progress to configure tunnel neighbour in this case. v2: Correct format of fixes tag. Fixes: f1df7956c11f ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queueJuergen Gross1-0/+1
xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty. Cc: stable@vger.kernel.org Fixes: 98f6d57ced73 ("xen-netback: process guest rx packets in batches") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14net: atlantic: remove aq_nic_deinit() when resumeChia-Lin Kao (AceLan)1-3/+0
aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110 Fixes: 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-14net: atlantic: remove deep parameter on suspend/resume functionsChia-Lin Kao (AceLan)1-14/+10
Below commit claims that atlantic NIC requires to reset the device on pm op, and had set the deep to true for all suspend/resume functions. commit 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") So, we could remove deep parameter on suspend/resume functions without any functional change. Fixes: 1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Link: https://lore.kernel.org/r/20220713111224.1535938-1-acelan.kao@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-14sfc: fix kernel panic when creating VFÍñigo Huguet1-0/+3
When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip... Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested") Reported-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-13Merge branch '100GbE' of ↵Jakub Kicinski4-21/+136
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-12 This series contains updates to ice driver only. Paul fixes detection of E822 devices for firmware update and changes NVM read for snapshot creation to be done in chunks as some systems cannot read the entire NVM in the allotted time. ==================== Link: https://lore.kernel.org/r/20220712164829.7275-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13sfc: fix use after free when disabling sriovÍñigo Huguet1-3/+7
Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13net: sunhme: output link status with a single print.Nick Bowler1-31/+12
This driver currently prints the link status using four separate printk calls, which these days gets presented to the user as four distinct messages, not exactly ideal: [ 32.582778] eth0: Link is up using [ 32.582828] internal [ 32.582837] transceiver at [ 32.582888] 100Mb/s, Full Duplex. Restructure the display_link_mode function to use a single netdev_info call to present all this information as a single message, which is much nicer: [ 33.640143] hme 0000:00:01.1 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. The display_forced_link_mode function has a similar structure, so adjust it in a similar fashion. Signed-off-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13r8152: fix accessing unset transport headerHayes Wang1-7/+7
A warning is triggered by commit 66e4c8d95008 ("net: warn if transport header was not set"). The warning is harmless, because the value from skb_transport_offset() is only used for skb_is_gso() is true or the skb->ip_summed is equal to CHECKSUM_PARTIAL. Fixes: 66e4c8d95008 ("net: warn if transport header was not set") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13Merge tag 'wireless-2022-07-13' of ↵David S. Miller4-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A small set of fixes for * queue selection in mesh/ocb * queue handling on interface stop * hwsim virtio device vs. some other virtio changes * dt-bindings email addresses * color collision memory allocation * a const variable in rtw88 * shared SKB transmit in the ethernet format path * P2P client port authorization ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: stmmac: fix leaks in probeDan Carpenter1-2/+4
These two error paths should clean up before returning. Fixes: 2bb4b98b60d7 ("net: stmmac: Add Ingenic SoCs MAC support.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: ftgmac100: Hold reference returned by of_get_child_by_name()Liang He1-1/+14
In ftgmac100_probe(), we should hold the refernece returned by of_get_child_by_name() and use it to call of_node_put() for reference balance. Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13tcp: Fix data-races around sysctl_tcp_ecn.Kuniyuki Iwashima1-1/+1
While reading sysctl_tcp_ecn, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-12bnxt_en: Fix bnxt_refclk_read()Pavan Chebbi1-2/+11
The upper 32-bit PHC register is not latched when reading the lower 32-bit PHC register. Current code leaves a small window where we may not read correct higher order bits if the lower order bits are just about to wrap around. This patch fixes this by reading higher order bits twice and makes sure that final value is correctly paired with its lower 32 bits. Fixes: 30e96f487f64 ("bnxt_en: Do not read the PTP PHC during chip reset") Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix and simplify XDP transmit pathMichael Chan1-5/+5
Fix the missing length hint in the TX BD for the XDP transmit path. The length hint is required on legacy chips. Also, simplify the code by eliminating the first_buf local variable. tx_buf contains the same value. The opaque value only needs to be set on the first BD. Fix this also for correctness. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: fix livepatch queryVikas Gupta1-3/+5
In the livepatch query fw_target BNXT_FW_SRT_PATCH is applicable for P5 chips only. Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: Fix bnxt_reinit_after_abort() code pathMichael Chan1-1/+2
bnxt_reinit_after_abort() is called during ifup when a previous FW reset sequence has aborted or a previous ifup has failed after detecting FW reset. In all cases, it is safe to assume that a previous FW reset has completed and the driver may not have fully reinitialized. Prior to this patch, it is assumed that the FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be set by the firmware in bnxt_hwrm_if_change(). This may not be true if the driver has already attempted to register with the firmware. The firmware may not set the RESET_DONE flag again after the driver has registered, assuming that the driver has seen the flag already. Fix it to always go through the FW reset initialization path if the BNXT_STATE_FW_RESET_DET flag is set. This flag is always set by the driver after successfully going through bnxt_reinit_after_abort(). Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12bnxt_en: reclaim max resources if sriov enable failsKashyap Desai3-2/+8
If bnxt_sriov_enable() fails after some resources have been reserved for the VFs, the current code is not unwinding properly and the reserved resources become unavailable afterwards. Fix it by properly unwinding with a call to bnxt_hwrm_func_qcaps() to reset all maximum resources. Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA driver know to abort. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12ice: change devlink code to read NVM in blocksPaul M Stillwell Jr1-19/+40
When creating a snapshot of the NVM the driver needs to read the entire contents from the NVM and store it. The NVM reads are protected by a lock that is shared between the driver and the firmware. If the driver takes too long to read the entire NVM (which can happen on some systems) then the firmware could reclaim the lock and cause subsequent reads from the driver to fail. We could fix this by increasing the timeout that we pass to the firmware, but we could end up in the same situation again if the system is slow. Instead have the driver break the reading of the NVM into blocks that are small enough that we have confidence that the read will complete within the timeout time, but large enough not to cause significant AQ overhead. Fixes: dce730f17825 ("ice: add a devlink region for dumping NVM contents") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12ice: handle E822 generic device ID in PLDM headerPaul M Stillwell Jr3-2/+96
The driver currently presumes that the record data in the PLDM header of the firmware image will match the device ID of the running device. This is true for E810 devices. It appears that for E822 devices that this is not guaranteed to be true. Fix this by adding a check for the generic E822 device. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12net: marvell: prestera: fix missed deinit sequenceYevhen Orlov1-0/+1
Add unregister_fib_notifier as rollback of register_fib_notifier. Fixes: 4394fbcb78cf ("net: marvell: prestera: handle fib notifications") Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20220710122021.7642-1-yevhen.orlov@plvision.eu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-09nfp: fix issue of skb segments exceeds descriptor limitationBaowen Zheng1-8/+25
TCP packets will be dropped if the segments number in the tx skb exceeds limitation when sending iperf3 traffic with --zerocopy option. we make the following changes: Get nr_frags in nfp_nfdk_tx_maybe_close_block instead of passing from outside because it will be changed after skb_linearize operation. Fill maximum dma_len in first tx descriptor to make sure the whole head is included in the first descriptor. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-07net: ocelot: fix wrong time_after usagePavel Skripkin1-9/+8
Accidentally noticed, that this driver is the only user of while (time_after(jiffies...)). It looks like typo, because likely this while loop will finish after 1st iteration, because time_after() returns true when 1st argument _is after_ 2nd one. There is one possible problem with this poll loop: the scheduler could put the thread to sleep, and it does not get woken up for OCELOT_FDMA_CH_SAFE_TIMEOUT_US. During that time, the hardware has done its thing, but you exit the while loop and return -ETIMEDOUT. Fix it by using sane poll API that avoids all problems described above Fixes: 753a026cfec1 ("net: ocelot: add FDMA support") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220706132845.27968-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07Merge tag 'mlx5-fixes-2022-07-06' of ↵Jakub Kicinski11-38/+76
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-07-06 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Ring the TX doorbell on DMA errors net/mlx5e: Fix capability check for updating vnic env counters net/mlx5e: CT: Use own workqueue instead of mlx5e priv net/mlx5: Lag, correct get the port select mode str net/mlx5e: Fix enabling sriov while tc nic rules are offloaded net/mlx5e: kTLS, Fix build time constant test in RX net/mlx5e: kTLS, Fix build time constant test in TX net/mlx5: Lag, decouple FDB selection and shared FDB net/mlx5: TC, allow offload from uplink to other PF's VF ==================== Link: https://lore.kernel.org/r/20220706231309.38579-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: ethernet: ti: am65-cpsw: Fix devlink port register sequenceSiddharth Vadapalli1-7/+10
Renaming interfaces using udevd depends on the interface being registered before its netdev is registered. Otherwise, udevd reads an empty phys_port_name value, resulting in the interface not being renamed. Fix this by registering the interface before registering its netdev by invoking am65_cpsw_nuss_register_devlink() before invoking register_netdev() for the interface. Move the function call to devlink_port_type_eth_set(), invoking it after register_netdev() is invoked, to ensure that netlink notification for the port state change is generated after the netdev is completely initialized. Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: stmmac: dwc-qos: Disable split header for Tegra194Jon Hunter1-0/+1
There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/ Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07Merge tag 'net-5.19-rc6' of ↵Linus Torvalds24-237/+433
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter, can, and bluetooth. Current release - regressions: - bluetooth: fix deadlock on hci_power_on_sync Previous releases - regressions: - sched: act_police: allow 'continue' action offload - eth: usbnet: fix memory leak in error case - eth: ibmvnic: properly dispose of all skbs during a failover Previous releases - always broken: - bpf: - fix insufficient bounds propagation from adjust_scalar_min_max_vals - clear page contiguity bit when unmapping pool - netfilter: nft_set_pipapo: release elements in clone from abort path - mptcp: netlink: issue MP_PRIO signals from userspace PMs - can: - rcar_canfd: fix data transmission failed on R-Car V3U - gs_usb: gs_usb_open/close(): fix memory leak Misc: - add Wenjia as SMC maintainer" * tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) wireguard: Kconfig: select CRYPTO_CHACHA_S390 crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations wireguard: selftests: use microvm on x86 wireguard: selftests: always call kernel makefile wireguard: selftests: use virt machine on m68k wireguard: selftests: set fake real time in init r8169: fix accessing unset transport header net: rose: fix UAF bug caused by rose_t0timer_expiry usbnet: fix memory leak in error case Revert "tls: rx: move counting TlsDecryptErrors for sync" mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy mptcp: fix local endpoint accounting selftests: mptcp: userspace PM support for MP_PRIO signals mptcp: netlink: issue MP_PRIO signals from userspace PMs mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags mptcp: Avoid acquiring PM lock for subflow priority changes mptcp: fix locking in mptcp_nl_cmd_sf_destroy() net/mlx5e: Fix matchall police parameters validation net/sched: act_police: allow 'continue' action offload net: lan966x: hardcode the number of external ports ...
2022-07-06wireguard: Kconfig: select CRYPTO_CHACHA_S390Vladis Dronov1-0/+1
Select the new implementation of CHACHA20 for S390 when available. It is faster than the generic software implementation, but also prevents some linker errors in certain situations. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06r8169: fix accessing unset transport headerHeiner Kallweit1-6/+4
66e4c8d95008 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed68187 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4de3ed ("r8169: work around RTL8125 UDP hw bug") Reported-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06usbnet: fix memory leak in error caseOliver Neukum1-5/+12
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06net/mlx5e: Ring the TX doorbell on DMA errorsMaxim Mikityanskiy1-9/+30
TX doorbells may be postponed, because sometimes the driver knows that another packet follows (for example, when xmit_more is true, or when a MPWQE session is closed before transmitting a packet). However, the DMA mapping may fail for the next packet, in which case a new WQE is not posted, the doorbell isn't updated either, and the transmission of the previous packet will be delayed indefinitely. This commit fixes the described rare error flow by posting a NOP and ringing the doorbell on errors to flush all the previous packets. The MPWQE session is closed before that. DMA mapping in the MPWQE flow is moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions are not allowed. Stop room always has enough space for a NOP, because the actual TX WQE is not posted. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix capability check for updating vnic env countersGal Pressman1-1/+1
The existing capability check for vnic env counters only checks for receive steering discards, although we need the counters update for the exposed internal queue oob counter as well. This could result in the latter counter not being updated correctly when the receive steering discards counter is not supported. Fix that by checking whether any counter is supported instead of only the steering counter capability. Fixes: 0cfafd4b4ddf ("net/mlx5e: Add device out of buffer counter") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: CT: Use own workqueue instead of mlx5e privRoi Dayan1-8/+12
Allocate a ct priv workqueue instead of using mlx5e priv one so flushing will only be of related CT entries. Also move flushing of the workqueue before rhashtable destroy otherwise entries won't be valid. Fixes: b069e14fff46 ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: Lag, correct get the port select mode strLiu, Changcheng3-5/+5
mode & mode_flags is updated at the end of mlx5_activate_lag which may not reflect the actual mode as shown in below logic: mlx5_activate_lag(struct mlx5_lag *ldev, |-- unsigned long flags = 0; |-- err = mlx5_lag_set_flags(ldev, mode, tracker, shared_fdb, &flags); |-- err = mlx5_create_lag(ldev, tracker, mode, flags); |-- mlx5_get_str_port_sel_mode(ldev); |-- ldev->mode = mode; |-- ldev->mode_flags = flags; Use mode & flag as parameters to get port select mode info. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix enabling sriov while tc nic rules are offloadedPaul Blakey1-2/+3
There is a total of four 4M entries flow tables. In sriov disabled mode, ct, ct_nat and post_act take three of them. When adding the first tc nic rule in this mode, it will take another 4M table for the tc <chain,prio> table. If user then enables sriov, the legacy flow table tries to take another 4M and fails, and so enablement fails. To fix that, have legacy fdb take the next available maximum size from the fs ft pool. Fixes: 4a98544d1827 ("net/mlx5: Move chains ft pool to be used by all firmware steering") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: kTLS, Fix build time constant test in RXTariq Toukan1-2/+1
Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison against the size of the private RX TLS driver context. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: kTLS, Fix build time constant test in TXTariq Toukan1-2/+1
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison against the size of the private TX TLS driver context. Fixes: df8d866770f9 ("net/mlx5e: kTLS, Use kernel API to extract private offload context") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: Lag, decouple FDB selection and shared FDBMark Bloch4-8/+22
Multiport eswitch is required to use native FDB selection instead of affinity, This was achieved by passing the shared_fdb flag down the HW lag creation path. While it did accomplish the goal of setting FDB selection mode to native, it had the side effect of also creating a shared FDB configuration. This created a few issues: - TC rules are inserted into a non active FDB, which means traffic isn't offloaded as all traffic will reach only a single FDB. - All wire traffic is treated as if a single physical port received it; while this is true for a bond configuration, this shouldn't be the case for multiport eswitch. Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE to indicate what FDB selection mode should be used. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: TC, allow offload from uplink to other PF's VFEli Cohen1-1/+1
Redirecting traffic from uplink to a VF is a legal operation of mulitport eswitch mode. Remove the limitation. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix matchall police parameters validationVlad Buslov1-7/+6
Referenced commit prepared the code for upcoming extension that allows mlx5 to offload police action attached to flower classifier. However, with regard to existing matchall classifier offload validation should be reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police action and extend scan_tc_matchall_fdb_actions() to only allow such actions with matchall classifier. Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-05net: lan966x: hardcode the number of external portsMichael Walle2-6/+3
Instead of counting the child nodes in the device tree, hardcode the number of ports in the driver itself. The counting won't work at all if an ethernet port is marked as disabled, e.g. because it is not connected on the board at all. It turns out that the LAN9662 and LAN9668 use the same switching IP with the same synthesis parameters. The only difference is that the output ports are not connected. Thus, we can just hardcode the number of physical ports to 8. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04Merge tag 'linux-can-fixes-for-5.19-20220704' of ↵Jakub Kicinski11-212/+290
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-07-04 The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and converts a costly synchronize_rcu() to call_rcu() to fix a performance regression. Srinivas Neeli's patch for the xilinx_can driver drops the brp limit down to 1, as only the pre-production silicon have an issue with a brp of 1. The next patch is by Duy Nguyen and fixes the data transmission on R-Car V3U SoCs in the rcar_canfd driver. Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver. Liang He's patch removes an extra of_node_get() in the grcan driver. The next 2 patches are by me, target the m_can driver and fix the timestamp handling used for peripheral devices like the tcan4x5x. Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and fixes CAN clock and bit timing related issues. The remaining 5 patches target the mcp251xfd driver. Thomas Kopp contributes 2 patches to improve the workaround for broken CRC when reading the TBC register. 3 patches by me add a missing hrtimer_cancel() during the ndo_stop() callback, and fix the reading of the Device ID register. * tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits can: m_can: m_can_chip_config(): actually enable internal timestamping can: grcan: grcan_probe(): remove extra of_node_get() can: gs_usb: gs_usb_open/close(): fix memory leak can: rcar_canfd: Fix data transmission failed on R-Car V3U Revert "can: xilinx_can: Limit CANFD brp to 2" can: bcm: use call_rcu() instead of costly synchronize_rcu() ==================== Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversionMarc Kleine-Budde1-1/+2
In mcp251xfd_register_get_dev_id() the device ID register is read with handcrafted SPI transfers. As all registers, this register is in little endian. Further it is not naturally aligned in struct mcp251xfd_map_buf_nocrc::data. However after the transfer the register content is converted from big endian to CPU endianness not taking care of being unaligned. Fix the conversion by converting from little endian to CPU endianness taking the unaligned source into account. Side note: So far the register content is 0x0 on all mcp251xfd compatible chips, and is only used for an informative printk. Link: https://lore.kernel.org/all/20220627092859.809042-1-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read ↵Marc Kleine-Budde1-1/+1
dev_id The device ID register is 32 bits wide. The driver uses incorrectly the size of a pointer to a u32 to calculate the length of the SPI transfer. This results in a read of 2 registers on 64 bit platforms. This is no problem on the Linux side, as the RX buffer of the SPI transfer is large enough. In the mpc251xfd chip this results in the read of an undocumented register. So far no problems were observed. Fix the length of the SPI transfer to read the device ID register only. Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()Marc Kleine-Budde1-0/+1
In commit 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") software based TX coalescing was added to the driver. The key idea is to keep the TX complete IRQ disabled for some time after processing it and re-enable later by a hrtimer. When bringing the interface down, this timer has to be stopped. Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to mcp251xfd_stop(). Link: https://lore.kernel.org/all/20220620143942.891811-1-mkl@pengutronix.de Fixes: 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") Cc: stable@vger.kernel.org # v5.18 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on ↵Thomas Kopp1-6/+3
TBC register The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. New investigations and simulations indicate that the CRC send by the device is calculated on correct data, and the data is incorrectly received by the SPI host controller. Use flipped instead of original data and update workaround description in mcp251xfd_regmap_crc_read(). [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for ↵Thomas Kopp1-5/+8
mcp2517fd The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. Measurements on the mcp2517fd show that the workaround is applicable not only of the lowest byte is 0x00 or 0x80, but also if 3 least significant bits are set. Update check on 1st data byte and workaround description accordingly. [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Reported-by: Pavel Modilaynen <pavel.modilaynen@volvocars.com> Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: kvaser_usb_leaf: fix bittiming limitsJimmy Assarsson3-35/+47
Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe") Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family") Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: remove stray netlink.h include] [mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regressionJimmy Assarsson3-21/+38
The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters. This regression affects M32C based Leaf devices with non-16MHz clock. Fixes: fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device") Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_infoJimmy Assarsson3-148/+172
Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks. All Kvaser USBcanII supports listen-only mode and error counter reporting. Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 08:18:36 +0000