summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-20Merge tag 'linux-can-fixes-for-5.11-20210120' of ↵Jakub Kicinski3-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== linux-can-fixes-for-5.11-20210120 All three patches are by Vincent Mailhol and fix a potential use after free bug in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In the TX-path the skb is used to read from after it was passed to the networking stack with netif_rx_ni(). * tag 'linux-can-fixes-for-5.11-20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug ==================== Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: systemport: free dev before on error pathPan Bian1-2/+4
On the error path, it should goto the error handling label to free allocated memory rather than directly return. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: usb: cdc_ncm: don't spew notificationsGrant Grundler1-1/+11
RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: mscc: ocelot: Fix multicast to the CPU portAlban Bedel1-5/+18
Multicast entries in the MAC table use the high bits of the MAC address to encode the ports that should get the packets. But this port mask does not work for the CPU port, to receive these packets on the CPU port the MAC_CPU_COPY flag must be set. Because of this IPv6 was effectively not working because neighbor solicitations were never received. This was not apparent before commit 9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries) as the IPv6 entries were broken so all incoming IPv6 multicast was then treated as unknown and flooded on all ports. To fix this problem rework the ocelot_mact_learn() to set the MAC_CPU_COPY flag when a multicast entry that target the CPU port is added. For this we have to read back the ports endcoded in the pseudo MAC address by the caller. It is not a very nice design but that avoid changing the callers and should make backporting easier. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries") Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol1-4/+4
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: vxcan: vxcan_xmit: fix use after free bugVincent Mailhol1-2/+4
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni(). Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: dev: can_restart: fix use after free bugVincent Mailhol1-2/+2
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-19net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter1-1/+1
The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven1-2/+2
sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Make PHY access aware of Runtime PM to fix reboot crashGeert Uytterhoeven1-0/+26
Wolfram reports that his R-Car H2-based Lager board can no longer be rebooted in v5.11-rc1, as it crashes with an imprecise external abort. The issue can be reproduced on other boards (e.g. Koelsch with R-Car M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is down at reboot time: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000 Internal error: : 1406 [#1] ARM Modules linked in: CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) PC is at sh_mdio_ctrl+0x44/0x60 LR is at sh_mmd_ctrl+0x20/0x24 ... Backtrace: [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24) r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4 [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8) [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc) r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001 [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0) r7:0000001f r6:00000001 r5:c221e000 r4:c221e000 [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54) r7:0000001f r6:00000001 r5:c221e000 r4:c221e458 [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20) r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800 [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80) [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50) r5:c229f800 r4:c229f800 [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c) r5:c229f800 r4:c229f804 [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8) [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48) r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000 [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60) [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208) r5:4321fedc r4:01234567 [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c) r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54) As of commit e2f016cf775129c0 ("net: phy: add a shutdown procedure"), system reboot calls phy_disable_interrupts() during shutdown. As this happens unconditionally, the PHY registers may be accessed while the device is suspended, causing undefined behavior, which may crash the system. Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by wrappers that take care of Runtime PM, to resume the device when needed. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven1-2/+4
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes1-0/+4
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean1-3/+1
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15octeontx2-af: Fix missing check bugs in rvu_cgx.cYingjie Wang1-0/+6
In rvu_mbox_handler_cgx_mac_addr_get() and rvu_mbox_handler_cgx_mac_addr_set(), the msg is expected only from PFs that are mapped to CGX LMACs. It should be checked before mapping, so we add the is_cgx_config_permitted() in the functions. Fixes: 96be2e0da85e ("octeontx2-af: Support for MAC address filters in CGX") Signed-off-by: Yingjie Wang <wangyingjie55@126.com> Reviewed-by: Geetha sowjanya<gakula@marvell.com> Link: https://lore.kernel.org/r/1610719804-35230-1-git-send-email-wangyingjie55@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14nt: usb: USB_RTL8153_ECM should not default to yGeert Uytterhoeven1-1/+0
In general, device drivers should not be enabled by default. Fixes: 657bc1d10bfc23ac ("r8153_ecm: avoid to be prior to r8152 driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210113144309.1384615-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14net: stmmac: fix taprio configuration when base_time is in the pastYannick Vignon1-2/+18
The Synopsys TSN MAC supports Qbv base times in the past, but only up to a certain limit. As a result, a taprio qdisc configuration with a small base time (for example when treating the base time as a simple phase offset) is not applied by the hardware and silently ignored. This was observed on an NXP i.MX8MPlus device, but likely affects all TSN-variants of the MAC. Fix the issue by making sure the base time is in the future, pushing it by an integer amount of cycle times if needed. (a similar check is already done in several other taprio implementations, see for example drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or drivers/net/dsa/sja1105/sja1105_ptp.h#L39). Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14net: stmmac: fix taprio schedule configurationYannick Vignon1-48/+4
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP i.MX8MPlus device, the effective cycle time differed from the requested one by N*96ns, with N number of entries in the Qbv Gate Control List. This is because the driver was adding a 96ns margin to each interval of the GCL, apparently to account for the IPG. The problem was observed on NXP i.MX8MPlus devices but likely affected all devices relying on the same configuration callback (dwmac 4.00, 4.10, 5.10 variants). Fix the issue by removing the margins, and simply setup the MAC with the provided cycle time value. This is the behavior expected by the user-space API, as altering the Qbv schedule timings would break standards conformance. This is also the behavior of several other Ethernet MAC implementations supporting taprio, including the dwxgmac variant of stmmac. Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13net: stmmac: Fixed mtu channged by cache alignedDavid Wu1-1/+2
Since the original mtu is not used when the mtu is updated, the mtu is aligned with cache, this will get an incorrect. For example, if you want to configure the mtu to be 1500, but mtu 1536 is configured in fact. Fixed: eaf4fac478077 ("net: stmmac: Do not accept invalid MTU values") Signed-off-by: David Wu <david.wu@rock-chips.com> Link: https://lore.kernel.org/r/20210113034109.27865-1-david.wu@rock-chips.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13cxgb4/chtls: Fix tid stuck due to wrong update of qidAyush Sawal4-2/+82
TID stuck is seen when there is a race in CPL_PASS_ACCEPT_RPL/CPL_ABORT_REQ and abort is arriving before the accept reply, which sets the queue number. In this case HW ends up sending CPL_ABORT_RPL_RSS to an incorrect ingress queue. V1->V2: - Removed the unused variable len in chtls_set_quiesce_ctrl(). V2->V3: - As kfree_skb() has a check for null skb, so removed this check before calling kfree_skb() in func chtls_send_reset(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Link: https://lore.kernel.org/r/20210112053600.24590-1-ayush.sawal@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13i40e: fix potential NULL pointer dereferencingCristian Dumitrescu1-1/+1
Currently, the function i40e_construct_skb_zc only frees the input xdp buffer when the output skb is successfully built. On error, the function i40e_clean_rx_irq_zc does not commit anything for the current packet descriptor and simply exits the packet descriptor processing loop, with the plan to restart the processing of this descriptor on the next invocation. Therefore, on error the ring next-to-clean pointer should not advance, the xdp i.e. *bi buffer should not be freed and the current buffer info should not be invalidated by setting *bi to NULL. Therefore, the *bi should only be set to NULL when the function i40e_construct_skb_zc is successful, otherwise a NULL *bi will be dereferenced when the work for the current descriptor is eventually restarted. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/r/20210111181138.49757-1-cristian.dumitrescu@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13Merge tag 'linux-can-fixes-for-5.11-20210113' of ↵Jakub Kicinski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-13 The first patch is by Oliver Hartkopp for the CAn ISO-TP protocol and fixes a kernel information leak to userspace. The last patch is by Qinglang Miao for the mcp251xfd driver and fixes a NULL pointer check to work on the correct variable. * tag 'linux-can-fixes-for-5.11-20210113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check can: isotp: isotp_getname(): fix kernel information leak ==================== Link: https://lore.kernel.org/r/20210113212158.925513-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13net: stmmac: use __napi_schedule() for PREEMPT_RTSeb Laveze1-2/+2
Use of __napi_schedule_irqoff() is not safe with PREEMPT_RT in which hard interrupts are not disabled while running the threaded interrupt. Using __napi_schedule() works for both PREEMPT_RT and mainline Linux, just at the cost of an additional check if interrupts are disabled for mainline (since they are already disabled). Similar to the fix done for enetc commit 215602a8d212 ("enetc: use napi_schedule to be compatible with PREEMPT_RT") Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com> Link: https://lore.kernel.org/r/20210112140121.1487619-1-sebastien.laveze@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer checkQinglang Miao1-1/+1
If alloc_canfd_skb() returns NULL, 'cfg' is an uninitialized variable, so we should check 'skb' rather than 'cfd' after calling alloc_canfd_skb(priv->ndev, &cfd). Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210113073100.79552-1-miaoqinglang@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-12bnxt_en: Clear DEFRAG flag in firmware message when retry flashing.Pavan Chebbi1-1/+2
When the FW tells the driver to retry the INSTALL_UPDATE command after it has cleared the NVM area, the driver is not clearing the previously used ALLOWED_TO_DEFRAG flag. As a result the FW tries to defrag the NVM area a second time in a loop and can fail the request. Fixes: 1432c3f6a6ca ("bnxt_en: Retry installing FW package under NO_SPACE error condition.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12bnxt_en: Improve stats context resource accounting with RDMA driver loaded.Michael Chan1-2/+6
The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts used by the RDMA driver correctly when the RDMA driver is freeing the MSIX vectors. It assumes that if the RDMA driver is registered, the additional stats contexts will be needed. This is not true when the RDMA driver is about to unregister and frees the MSIX vectors. This slight error leads to over accouting of the stats contexts needed after the RDMA driver has unloaded. This will cause some firmware warning and error messages in dmesg during subsequent config. changes or ifdown/ifup. Fix it by properly accouting for extra stats contexts only if the RDMA driver is registered and MSIX vectors have been successfully requested. Fixes: c027c6b4e91f ("bnxt_en: get rid of num_stat_ctxs variable") Reviewed-by: Yongping Zhang <yongping.zhang@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8153_ecm: Add Lenovo Powered USB-C Hub as a fallback of r8152Leon Schuermann1-0/+8
This commit enables the use of the r8153_ecm driver, introduced with commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip. This results in the following driver preference: - if r8152 is available, use the r8152 driver - if r8152 is not available, use the r8153_ecm driver This is done to prevent the NIC from constantly sending pause frames when the host system enters standby (fixed by using the r8152 driver in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing the device to work with the r8153_ecm driver as a fallback. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8152: Add Lenovo Powered USB-C Travel HubLeon Schuermann2-0/+8
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to use the cdc_ether driver. However, using this driver, with the system suspended the device constantly sends pause-frames as soon as the receive buffer fills up. This causes issues with other devices, where some Ethernet switches stop forwarding packets altogether. Using the Realtek driver (r8152) fixes this issue. Pause frames are no longer sent while the host system is suspended. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: phy: smsc: fix clk error handlingMarco Felsch1-1/+2
Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") added the phy clk support. The commit already checks if clk_get_optional() throw an error but instead of returning the error it ignores it. Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM requestAndrey Zhizhikin1-1/+1
MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: mvpp2: Remove Pause and Asym_Pause supportStefan Chulski1-2/+0
Packet Processor hardware not connected to MAC flow control unit and cannot support TX flow control. This patch disable flow control support. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1610306582-16641-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09mlxsw: core: Increase critical threshold for ASIC thermal zoneVadim Pasternak1-1/+1
Increase critical threshold for ASIC thermal zone from 110C to 140C according to the system hardware requirements. All the supported ASICs (Spectrum-1, Spectrum-2, Spectrum-3) could be still operational with ASIC temperature below 140C. With the old critical threshold value system can perform unjustified shutdown. All the systems equipped with the above ASICs implement thermal protection mechanism at firmware level and firmware could decide to perform system thermal shutdown in case the temperature is below 140C. So with the new threshold system will not meltdown, while thermal operating range will be aligned with hardware abilities. Fixes: 41e760841d26 ("mlxsw: core: Replace thermal temperature trips with defines") Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09mlxsw: core: Add validation of transceiver temperature thresholdsVadim Pasternak1-4/+7
Validate thresholds to avoid a single failure due to some transceiver unreliability. Ignore the last readouts in case warning temperature is above alarm temperature, since it can cause unexpected thermal shutdown. Stay with the previous values and refresh threshold within the next iteration. This is a rare scenario, but it was observed at a customer site. Fixes: 6a79507cfe94 ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09netxen_nic: fix MSI/MSI-x interruptsManish Chopra1-6/+1
For all PCI functions on the netxen_nic adapter, interrupt mode (INTx or MSI) configuration is dependent on what has been configured by the PCI function zero in the shared interrupt register, as these adapters do not support mixed mode interrupts among the functions of a given adapter. Logic for setting MSI/MSI-x interrupt mode in the shared interrupt register based on PCI function id zero check is not appropriate for all family of netxen adapters, as for some of the netxen family adapters PCI function zero is not really meant to be probed/loaded in the host but rather just act as a management function on the device, which caused all the other PCI functions on the adapter to always use legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode. This patch replaces that check with port number so that for all type of adapters driver attempts for MSI/MSI-x interrupt modes. Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08ppp: fix refcount underflow on channel unbridgeTom Parkin1-3/+9
When setting up a channel bridge, ppp_bridge_channels sets the pch->bridge field before taking the associated reference on the bridge file instance. This opens up a refcount underflow bug if ppp_bridge_channels called via. iotcl runs concurrently with ppp_unbridge_channels executing via. file release. The bug is triggered by ppp_bridge_channels taking the error path through the 'err_unset' label. In this scenario, pch->bridge is set, but the reference on the bridged channel will not be taken because the function errors out. If ppp_unbridge_channels observes pch->bridge before it is unset by the error path, it will erroneously drop the reference on the bridged channel and cause a refcount underflow. To avoid this, ensure that ppp_bridge_channels holds a reference on each channel in advance of setting the bridge pointers. Signed-off-by: Tom Parkin <tparkin@katalix.com> Fixes: 4cf476ced45d ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20210107181315.3128-1-tparkin@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: ipa: modem: add missing SET_NETDEV_DEV() for proper sysfs linksStephan Gerhold1-0/+1
At the moment it is quite hard to identify the network interface provided by IPA in userspace components: The network interface is created as virtual device, without any link to the IPA device. The interface name ("rmnet_ipa%d") is the only indication that the network interface belongs to IPA, but this is not very reliable. Add SET_NETDEV_DEV() to associate the network interface with the IPA parent device. This allows userspace services like ModemManager to properly identify that this network interface is provided by IPA and belongs to the modem. Cc: Alex Elder <elder@kernel.org> Fixes: a646d6ec9098 ("soc: qcom: ipa: modem and microcontroller") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210106100755.56800-1-stephan@gerhold.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge tag 'mlx5-fixes-2021-01-07' of ↵Jakub Kicinski12-65/+120
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-07 * tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups net/mlx5e: Fix two double free cases net/mlx5: Release devlink object if adev fails net/mlx5e: ethtool, Fix restriction of autoneg with 56G net/mlx5e: In skb build skip setting mark in switchdev mode net/mlx5: E-Switch, fix changing vf VLANID net/mlx5e: Fix SWP offsets when vlan inserted by driver net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address net/mlx5e: Add missing capability check for uplink follow net/mlx5: Check if lag is supported before creating one ==================== Link: https://lore.kernel.org/r/20210107202845.470205-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski1-3/+4
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix chtls resources release sequenceAyush Sawal1-4/+4
CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Added a check to avoid NULL pointer dereferenceAyush Sawal1-0/+5
In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Replace skb_dequeue with skb_peekAyush Sawal1-1/+1
The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Avoid unnecessary freeing of oreq pointerAyush Sawal1-3/+1
In chtls_pass_accept_request(), removing the chtls_reqsk_free() call to avoid oreq freeing twice. Here oreq is the pointer to struct request_sock. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix panic when route to peer not configuredAyush Sawal1-2/+12
If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Remove invalid set_tcb callAyush Sawal1-3/+0
At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix hardware tid leakAyush Sawal1-36/+3
send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net/mlx5e: Fix memleak in mlx5e_create_l2_table_groupsDinghao Liu1-0/+1
When mlx5_create_flow_group() fails, ft->g should be freed just like when kvzalloc() fails. The caller of mlx5e_create_l2_table_groups() does not catch this issue on failure, which leads to memleak. Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: Fix two double free casesDinghao Liu1-0/+2
mlx5e_create_ttc_table_groups() frees ft->g on failure of kvzalloc(), but such failure will be caught by its caller in mlx5e_create_ttc_table() and ft->g will be freed again in mlx5e_destroy_flow_table(). The same issue also occurs in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after kfree() to avoid double free. Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets") Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5: Release devlink object if adev failsLeon Romanovsky1-2/+5
Add missed freeing previously allocated devlink object. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: ethtool, Fix restriction of autoneg with 56GAya Levin1-6/+18
Prior to this patch, configuring speed to 50G with autoneg off over devices supporting 50G per lane failed. Support for 50G per lane introduced a new set of link-modes, on which driver always performed a speed validation as if only legacy link-modes were configured. Fix driver speed validation to force setting autoneg over 56G only if in legacy link-mode. Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07net/mlx5e: In skb build skip setting mark in switchdev modeMaor Dickman1-0/+5
sop_drop_qpn field in the cqe is used by two features, in SWITCHDEV mode to restore the chain id in case of a miss and in LEGACY mode to support skbedit mark action. In build RX skb, the skb mark field is set regardless of the configured mode which cause a corruption of the mark field in case of switchdev mode. Fix by overriding the mark value back to 0 in the representor tc update skb flow. Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-13 21:05:01 +0000