summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-08-06net: dsa: mt7530: add the missing RxUnicast MIB counterDENG Qingfang1-0/+1
Add the missing RxUnicast counter. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05net: vxge: fix use-after-free in vxge_device_unregisterPavel Skripkin1-3/+3
Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: fec: fix use-after-free in fec_drv_removePavel Skripkin1-1/+1
Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: pegasus: fix uninit-value in get_interrupt_intervalPavel Skripkin1-3/+11
Syzbot reported uninit value pegasus_probe(). The problem was in missing error handling. get_interrupt_interval() internally calls read_eprom_word() which can fail in some cases. For example: failed to receive usb control message. These cases should be handled to prevent uninit value bug, since read_eprom_word() will not initialize passed stack variable in case of internal failure. Fail log: BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0 ... Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x24c/0x2e0 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 .... Local variable ----data.i@pegasus_probe created at: get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: ethernet: ti: am65-cpsw: fix crash in ↵Grygorii Strashko1-1/+5
am65_cpsw_port_offload_fwd_mark_update() The am65_cpsw_port_offload_fwd_mark_update() causes NULL exception crash when there is at least one disabled port and any other port added to the bridge first time. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000858 pc : am65_cpsw_port_offload_fwd_mark_update+0x54/0x68 lr : am65_cpsw_netdevice_event+0x8c/0xf0 Call trace: am65_cpsw_port_offload_fwd_mark_update+0x54/0x68 notifier_call_chain+0x54/0x98 raw_notifier_call_chain+0x14/0x20 call_netdevice_notifiers_info+0x34/0x78 __netdev_upper_dev_link+0x1c8/0x290 netdev_master_upper_dev_link+0x1c/0x28 br_add_if+0x3f0/0x6d0 [bridge] Fix it by adding proper check for port->ndev != NULL. Fixes: 2934db9bcb30 ("net: ti: am65-cpsw-nuss: Add netdevice notifiers") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05bnx2x: fix an error code in bnx2x_nic_load()Dan Carpenter1-1/+2
Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05net: wwan: iosm: fix recursive lock acquire in unregisterM Chetan Kumar1-1/+1
Calling unregister_netdevice() inside wwan del link is trying to acquire the held lock in ndo_stop_cb(). Instead, queue net dev to be unregistered later. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05net: wwan: iosm: correct data protocol mask bitM Chetan Kumar1-2/+2
Correct ul/dl data protocol mask bit to know which protocol capability does device implement. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05net: wwan: iosm: endianness type correctionM Chetan Kumar2-3/+3
Endianness type correction for nr_of_bytes. This field is exchanged as part of host-device protocol communication. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05net: wwan: iosm: fix lkp buildbot warningM Chetan Kumar1-2/+2
Correct td buffer type casting & format specifier to fix lkp buildbot warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net: usb: lan78xx: don't modify phy_device state concurrentlyIvan T. Ivanov1-4/+12
Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net: usb: pegasus: Remove the changelog and DRIVER_VERSION.Petko Manolov1-28/+2
These are now deemed redundant. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net: usb: pegasus: Check the return value of get_geristers() and friends;Petko Manolov1-33/+75
Certain call sites of get_geristers() did not do proper error handling. This could be a problem as get_geristers() typically return the data via pointer to a buffer. If an error occurred the code is carelessly manipulating the wrong data. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Reviewed-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net/prestera: Fix devlink groups leakage in error flowLeon Romanovsky1-0/+2
Devlink trap group is registered but not released in error flow, add the missing devlink_trap_groups_unregister() call. Fixes: 0a9003f45e91 ("net: marvell: prestera: devlink: add traps/groups implementation") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03net: dsa: qca: ar9331: reorder MDIO write sequenceOleksij Rempel1-3/+11
In case of this switch we work with 32bit registers on top of 16bit bus. Some registers (for example access to forwarding database) have trigger bit on the first 16bit half of request and the result + configuration of request in the second half. Without this patch, we would trigger database operation and overwrite result in one run. To make it work properly, we should do the second part of transfer before the first one is done. So far, this rule seems to work for all registers on this switch. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210803063746.3600-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-03nfp: update ethtool reporting of pauseframe controlFei Qin1-0/+2
Pauseframe control is set to symmetric mode by default on the NFP. Pause frames can not be configured through ethtool now, but ethtool can report the supported mode. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03net: sparx5: fix bitmask on 32-bit targetsArnd Bergmann1-1/+1
I saw the build failure that was fixed in commit 6387f65e2acb ("net: sparx5: fix compiletime_assert for GCC 4.9") and noticed another issue that was introduced in the same patch: Using GENMASK() to create a 64-bit mask does not work on 32-bit architectures. This probably won't ever happen on this driver since it's specific to a 64-bit SoC, but it's better to write it portably, so use GENMASK_ULL() instead. Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03net: really fix the build...David S. Miller2-2/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: sparx5: fix compiletime_assert for GCC 4.9Jakub Kicinski1-6/+13
Stephen reports sparx5 broke GCC 4.9 build. Move the compiletime_assert() out of the static function. Compile-tested only, no object code changes. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: natsemi: Fix missing pci_disable_device() in probe and removeWang Hai1-6/+2
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: phy: micrel: Fix detection of ksz87xx switchSteve Bennett1-5/+5
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by: Steve Bennett <steveb@workware.net.au> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tagVladimir Oltean1-4/+0
On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a maskable "inner/outer tag" bit which means: - when set to 1: match single-outer and double tagged frames - when set to 0: match untagged and single-inner tagged frames - when masked off: match all frames regardless of the type of tag This driver does not make any meaningful distinction between inner tags (matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN table entries are installed as SJA1110_VLAN_D_TAG, which means that they match on both inner and outer tags. So it does not make sense that we install FDB entries with the IOTAG bit set to 1. In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the switch will see frames as outer-tagged or double-tagged (never inner). So the FDB entries will match if IOTAG is set to 1. In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the switch will see untagged and 802.1Q-tagged packets as inner-tagged, and 802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged packets will not match FDB entries if IOTAG is set to 1, but 802.1ad tagged packets will. Strange. To fix this, simply mask off the IOTAG bit from FDB entries, and make them match regardless of whether the VLAN tag is inner or outer. Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 tooVladimir Oltean1-14/+4
Similar but not quite the same with what was done in commit b11f0a4c0c81 ("net: dsa: sja1105: be stateless when installing FDB entries") for SJA1105E/T, it is desirable to drop the priv->vlan_aware check and simply go ahead and install FDB entries in the VLAN that was given by the bridge. As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a maskable TCAM, and we are installing VLAN-unaware FDB entries with the VLAN ID masked off. However, such FDB entries might completely obscure VLAN-aware entries where the VLAN ID is included in the search mask, because the switch looks up the FDB from left to right and picks the first entry which results in a masked match. So it depends on whether the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries. Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS and a VLAN-aware one towards other set of DESTPORTS, the result is that the packets in VLAN-aware mode will be forwarded towards the DESTPORTS specified by the VLAN-unaware entry. To solve this, simply do not use the masked matching ability of the FDB for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we configure the switch for shared VLAN learning, so the VLAN ID will be ignored anyway during lookup, so it is redundant to mask it off in the TCAM. This patch conflicts with net-next commit 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") which changed this line: if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { into: if (priv->vlan_aware) { When merging with net-next, the lines added by this patch should take precedence in the conflict resolution (i.e. the "if" condition should be deleted in both cases). Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a ↵Vladimir Oltean1-3/+8
new address Currently, when sja1105pqrs_fdb_add() is called for a host-joined IPv6 MDB entry such as 33:33:00:00:00:6a, the search for that address will return the FDB entry for SJA1105_UNKNOWN_MULTICAST, which has a destination MAC of 01:00:00:00:00:00 and a mask of 01:00:00:00:00:00. It returns that entry because, well, it matches, in the sense that unknown multicast is supposed by design to match it... But the issue is that we then proceed to overwrite this entry with the one for our precise host-joined multicast address, and the unknown multicast entry is no longer there - unknown multicast is now flooded to the same group of ports as broadcast, which does not look up the FDB. To solve this problem, we should ignore searches that return the unknown multicast address as the match, and treat them as "no match" which will result in the entry being installed to hardware. For this to work properly, we need to put the result of the FDB search in a temporary variable in order to avoid overwriting the l2_lookup entry we want to program. The l2_lookup entry returned by the search might not have the same set of DESTPORTS and not even the same MACADDR as the entry we're trying to add. Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with ↵Vladimir Oltean1-2/+55
statically added ones The procedure to add a static FDB entry in sja1105 is concurrent with dynamic learning performed on all bridge ports and the CPU port. The switch looks up the FDB from left to right, and also learns dynamically from left to right, so it is possible that between the moment when we pick up a free slot to install an FDB entry, another slot to the left of that one becomes free due to an address ageing out, and that other slot is then immediately used by the switch to learn dynamically the same address as we're trying to add statically. The result is that we succeeded to add our static FDB entry, but it is being shadowed by a dynamic FDB entry to its left, and the switch will behave as if our static FDB entry did not exist. We cannot really prevent this from happening unless we make the entire process to add a static FDB entry a huge critical section where address learning is temporarily disabled on _all_ ports, and then re-enabled according to the configuration done by sja1105_port_set_learning. However, that is kind of disruptive for the operation of the network. What we can do alternatively is to simply read back the FDB for dynamic entries located before our newly added static one, and delete them. This will guarantee that our static FDB entry is now operational. It will still not guarantee that there aren't dynamic FDB entries to the _right_ of that static FDB entry, but at least those entries will age out by themselves since they aren't hit, and won't bother anyone. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: overwrite dynamic FDB entries with static ones in ↵Vladimir Oltean1-4/+6
.port_fdb_add The SJA1105 switch family leaves it up to software to decide where within the FDB to install a static entry, and to concatenate destination ports for already existing entries (the FDB is also used for multicast entries), it is not as simple as just saying "please add this entry". This means we first need to search for an existing FDB entry before adding a new one. The driver currently manages to fool itself into thinking that if an FDB entry already exists, there is nothing to be done. But that FDB entry might be dynamically learned, case in which it should be replaced with a static entry, but instead it is left alone. This patch checks the LOCKEDS ("locked/static") bit from found FDB entries, and lets the code "goto skip_finding_an_index;" if the FDB entry was not static. So we also need to move the place where we set LOCKEDS = true, to cover the new case where a dynamic FDB entry existed but was dynamic. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: fix static FDB writes for SJA1110Vladimir Oltean1-13/+14
The blamed commit made FDB access on SJA1110 functional only as far as dumping the existing entries goes, but anything having to do with an entry's index (adding, deleting) is still broken. There are in fact 2 problems, all caused by improperly inheriting the code from SJA1105P/Q/R/S: - An entry size is SJA1110_SIZE_L2_LOOKUP_ENTRY (24) bytes and not SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY (20) bytes - The "index" field within an FDB entry is at bits 10:1 for SJA1110 and not 15:6 as in SJA1105P/Q/R/S This patch moves the packing function for the cmd->index outside of sja1105pqrs_common_l2_lookup_cmd_packing() and into the device specific functions sja1105pqrs_l2_lookup_cmd_packing and sja1110_l2_lookup_cmd_packing. Fixes: 74e7feff0e22 ("net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02qede: fix crash in rmmod qede while automatic debug collectionPrabhakar Kushwaha2-0/+9
A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-30can: esd_usb2: fix memory leakPavel Skripkin1-1/+15
In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-30can: ems_usb: fix memory leakPavel Skripkin1-1/+13
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-30can: usb_8dev: fix memory leakPavel Skripkin1-2/+13
In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-30can: mcba_usb_start(): add missing urb->transfer_dma initializationPavel Skripkin1-0/+2
Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Tested-by: Yasushi SHOJI <yashi@spacecubics.com> [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-30can: hi311x: fix a signedness bug in hi3110_cmd()Dan Carpenter1-1/+1
The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-28sis900: Fix missing pci_disable_device() in probe and removeWang Hai1-5/+2
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28tulip: windbond-840: Fix missing pci_disable_device() in probe and removeWang Hai1-5/+2
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32Chris Mi1-1/+1
The offending refactor commit uses u16 chain wrongly. Actually, it should be u32. Fixes: c620b772152b ("net/mlx5: Refactor tc flow attributes structure") CC: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()Dima Chumak1-2/+31
The result of __dev_get_by_index() is not checked for NULL and then gets dereferenced immediately. Also, __dev_get_by_index() must be called while holding either RTNL lock or @dev_base_lock, which isn't satisfied by mlx5e_hairpin_get_mdev() or its callers. This makes the underlying hlist_for_each_entry() loop not safe, and can have adverse effects in itself. Fix by using dev_get_by_index() and handling nullptr return value when ifindex device is not found. Update mlx5e_hairpin_get_mdev() callers to check for possible PTR_ERR() result. Fixes: 77ab67b7f0f9 ("net/mlx5e: Basic setup of hairpin object") Addresses-Coverity: ("Dereference null return value") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5: Unload device upon firmware fatal errorAya Levin1-2/+10
When fw_fatal reporter reports an error, the firmware in not responding. Unload the device to ensure that the driver closes all its resources, even if recovery is not due (user disabled auto-recovery or reporter is in grace period). On successful recovery the device is loaded back up. Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: Fix page allocation failure for ptp-RQ over SFAya Levin1-1/+1
Set the correct pci-device pointer to the ptp-RQ. This allows access to dma_mask and avoids allocation request with wrong pci-device. Fixes: a099da8ffcf6 ("net/mlx5e: Add RQ to PTP channel") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: Fix page allocation failure for trap-RQ over SFAya Levin1-1/+1
Set the correct device pointer to the trap-RQ, to allow access to dma_mask and avoid allocation request with the wrong pci-dev. WARNING: CPU: 1 PID: 12005 at kernel/dma/mapping.c:151 dma_map_page_attrs+0x139/0x1c0 ... all Trace: <IRQ> ? __page_pool_alloc_pages_slow+0x5a/0x210 mlx5e_post_rx_wqes+0x258/0x400 [mlx5_core] mlx5e_trap_napi_poll+0x44/0xc0 [mlx5_core] __napi_poll+0x24/0x150 net_rx_action+0x22b/0x280 __do_softirq+0xc7/0x27e do_softirq+0x61/0x80 </IRQ> __local_bh_enable_ip+0x4b/0x50 mlx5e_handle_action_trap+0x2dd/0x4d0 [mlx5_core] blocking_notifier_call_chain+0x5a/0x80 mlx5_devlink_trap_action_set+0x8b/0x100 [mlx5_core] Fixes: 5543e989fe5e ("net/mlx5e: Add trap entity to ETH driver") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: Consider PTP-RQ when setting RX VLAN strippingAya Levin2-2/+7
Add PTP-RQ to the loop when setting rx-vlan-offload feature via ethtool. On PTP-RQ's creation, set rx-vlan-offload into its parameters. Fixes: a099da8ffcf6 ("net/mlx5e: Add RQ to PTP channel") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: Add NETIF_F_HW_TC to hw_features when HTB offload is availableMaxim Mikityanskiy1-2/+3
If a feature flag is only present in features, but not in hw_features, the user can't reset it. Although hw_features may contain NETIF_F_HW_TC by the point where the driver checks whether HTB offload is supported, this flag is controlled by another condition that may not hold. Set it explicitly to make sure the user can disable it. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: RX, Avoid possible data corruption when relaxed ordering and LRO ↵Tariq Toukan1-1/+10
combined When HW aggregates packets for an LRO session, it writes the payload of two consecutive packets of a flow contiguously, so that they usually share a cacheline. The first byte of a packet's payload is written immediately after the last byte of the preceding packet. In this flow, there are two consecutive write requests to the shared cacheline: 1. Regular write for the earlier packet. 2. Read-modify-write for the following packet. In case of relaxed-ordering on, these two writes might be re-ordered. Using the end padding optimization (to avoid partial write for the last cacheline of a packet) becomes problematic if the two writes occur out-of-order, as the padding would overwrite payload that belongs to the following packet, causing data corruption. Avoid this by disabling the end padding optimization when both LRO and relaxed-ordering are enabled. Fixes: 17347d5430c4 ("net/mlx5e: Add support for PCI relaxed ordering") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5: E-Switch, handle devcom events only for ports on the same deviceRoi Dayan2-4/+4
This is the same check as LAG mode checks if to enable lag. This will fix adding peer miss rules if lag is not supported and even an incorrect rules in socket direct mode. Also fix the incorrect comment on mlx5_get_next_phys_dev() as flow #1 doesn't exists. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5: E-Switch, Set destination vport vhca id only when merged eswitch ↵Maor Dickman1-3/+4
is supported Destination vport vhca id is valid flag is set only merged eswitch isn't supported. Change destination vport vhca id value to be set also only when merged eswitch is supported. Fixes: e4ad91f23f10 ("net/mlx5e: Split offloaded eswitch TC rules for port mirroring") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5e: Disable Rx ntuple offload for uplink representorMaor Dickman1-9/+20
Rx ntuple offload is not supported in switchdev mode. Tryng to enable it cause kernel panic. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000001065a5067 P4D 80000001065a5067 PUD 106594067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 1089 Comm: ethtool Not tainted 5.13.0-rc7_for_upstream_min_debug_2021_06_23_16_44 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_arfs_enable+0x70/0xd0 [mlx5_core] Code: 44 24 10 00 00 00 00 48 c7 44 24 18 00 00 00 00 49 63 c4 48 89 e2 44 89 e6 48 69 c0 20 08 00 00 48 89 ef 48 03 85 68 ac 00 00 <48> 8b 40 08 48 89 44 24 08 e8 d2 aa fd ff 48 83 05 82 96 18 00 01 RSP: 0018:ffff8881047679e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000004000000000 RCX: 0000004000000000 RDX: ffff8881047679e0 RSI: 0000000000000000 RDI: ffff888115100880 RBP: ffff888115100880 R08: ffffffffa00f6cb0 R09: ffff888104767a18 R10: ffff8881151000a0 R11: ffff888109479540 R12: 0000000000000000 R13: ffff888104767bb8 R14: ffff888115100000 R15: ffff8881151000a0 FS: 00007f41a64ab740(0000) GS:ffff8882f5dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000104cbc005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: set_feature_arfs+0x1e/0x40 [mlx5_core] mlx5e_handle_feature+0x43/0xa0 [mlx5_core] mlx5e_set_features+0x139/0x1b0 [mlx5_core] __netdev_update_features+0x2b3/0xaf0 ethnl_set_features+0x176/0x3a0 ? __nla_parse+0x22/0x30 genl_family_rcv_msg_doit+0xe2/0x140 genl_rcv_msg+0xde/0x1d0 ? features_reply_size+0xe0/0xe0 ? genl_get_cmd+0xd0/0xd0 netlink_rcv_skb+0x4e/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2b0 netlink_sendmsg+0x225/0x450 sock_sendmsg+0x33/0x40 __sys_sendto+0xd4/0x120 ? __sys_recvmsg+0x4e/0x90 ? exc_page_fault+0x219/0x740 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f41a65b0cba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffd8d688358 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000010f42a0 RCX: 00007f41a65b0cba RDX: 0000000000000058 RSI: 00000000010f43b0 RDI: 0000000000000003 RBP: 000000000047ae60 R08: 00007f41a667c000 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 00000000010f4340 R13: 00000000010f4350 R14: 00007ffd8d688400 R15: 00000000010f42a0 Modules linked in: mlx5_vdpa vhost_iotlb vdpa xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core ptp pps_core fuse CR2: 0000000000000008 ---[ end trace c66523f2aba94b43 ]--- Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net/mlx5: Fix flow table chainingMaor Gottlieb1-4/+6
Fix a bug when flow table is created in priority that already has other flow tables as shown in the below diagram. If the new flow table (FT-B) has the lowest level in the priority, we need to connect the flow tables from the previous priority (p0) to this new table. In addition when this flow table is destroyed (FT-B), we need to connect the flow tables from the previous priority (p0) to the next level flow table (FT-C) in the same priority of the destroyed table (if exists). --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)-x| | p-y | | p-n | ---------- ---------- --------- | | ---------------- ------------------ |ns(e.g bypass)| |ns(e.g. kernel) | ---------------- ------------------ | | | ------- ------ ---- | p0 | | p1 | |p2| ------- ------ ---- | | \ -------- ------- ------ | FT-A | |FT-B | |FT-C| -------- ------- ------ Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-07-27net: hns3: change the method of obtaining default ptp cycleYufeng Mo2-9/+37
The ptp cycle is related to the hardware, so it may cause compatibility issues if a fixed value is used in driver. Therefore, the method of obtaining this value is changed to read from the register rather than use a fixed value in driver. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27octeontx2-af: Do NIX_RX_SW_SYNC twiceSunil Goutham1-2/+13
NIX_RX_SW_SYNC ensures all existing transactions are finished and pkts are written to LLC/DRAM, queues should be teared down after successful SW_SYNC. Due to a HW errata, in some rare scenarios an existing transaction might end after SW_SYNC operation. To ensure operation is fully done, do the SW_SYNC twice. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-26bnxt_en: Fix static checker warning in bnxt_fw_reset_task()Somnath Kotur1-3/+2
Now that we return when bnxt_open() fails in bnxt_fw_reset_task(), there is no need to check for 'rc' value again before invoking bnxt_reenable_sriov(). Fixes: 3958b1da725a ("bnxt_en: fix error path of FW reset") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 12:23:21 +0000