summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-06-01net: usb: cdc_mbim: add flag FLAG_SEND_ZLPDaniele Palmas1-1/+1
Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: dsa: b53: Add BCM5389 supportDamien Thébault3-1/+18
This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: Damien Thébault <damien.thebault@vitec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31ixgbe: fix parsing of TC actions for HW offloadOndřej Hlavatý1-5/+4
The previous code was optimistic, accepting the offload of whole action chain when there was a single known action (drop/redirect). This results in offloading a rule which should not be offloaded, because its behavior cannot be reproduced in the hardware. For example: $ tc filter add dev eno1 parent ffff: protocol ip \ u32 ht 800: order 1 match tcp src 42 FFFF \ action mirred egress mirror dev enp1s16 pipe \ drop The controller is unable to mirror the packet to a VF, but still offloads the rule by dropping the packet. Change the approach of the function to a pessimistic one, rejecting the chain when an unknown action is found. This is better suited for future extensions. Note that both recognized actions always return TC_ACT_SHOT, therefore it is safe to ignore actions behind them. Signed-off-by: Ondřej Hlavatý <ohlavaty@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: ethernet: davinci_emac: fix error handling in probe()Dan Carpenter1-10/+12
The current error handling code has an issue where it does: if (priv->txchan) cpdma_chan_destroy(priv->txchan); The problem is that ->txchan is either valid or an error pointer (which would lead to an Oops). I've changed it to use multiple error labels so that the test can be removed. Also there were some missing calls to netif_napi_del(). Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge tag 'wireless-drivers-for-davem-2018-05-30' of ↵David S. Miller2-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 Two last minute fixes, hopefully they make it to 4.17 still. rt2x00 * revert a fix which caused even more problems iwlwifi * fix a crash when there are 16 or more logical CPUs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/sonic: Use dma_mapping_error()Finn Thain1-1/+1
With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29tun: Fix NULL pointer dereference in XDP redirectToshiaki Makita1-6/+9
Calling XDP redirection requires bh disabled. Softirq can call another XDP function and redirection functions, then the percpu static variable ri->map can be overwritten to NULL. This is a generic XDP case called from tun. [ 3535.736058] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 3535.743974] PGD 0 P4D 0 [ 3535.746530] Oops: 0000 [#1] SMP PTI [ 3535.750049] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm ipmi_ssif irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel crypto_simd cryptd enclosure hpwdt hpilo glue_helper ipmi_si pcspkr wmi mei_me ioatdma mei ipmi_devintf shpchp dca ipmi_msghandler lpc_ich acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm smartpqi i40e crc32c_intel scsi_transport_sas tg3 i2c_core ptp pps_core [ 3535.813456] CPU: 5 PID: 1630 Comm: vhost-1614 Not tainted 4.17.0-rc4 #2 [ 3535.820127] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 3535.828732] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 3535.833740] RSP: 0018:ffffb4bc47bf7c58 EFLAGS: 00010246 [ 3535.839009] RAX: ffff9fdfcfea1c40 RBX: 0000000000000000 RCX: ffff9fdf27fe3100 [ 3535.846205] RDX: ffff9fdfca769200 RSI: 0000000000000000 RDI: 0000000000000000 [ 3535.853402] RBP: ffffb4bc491d9000 R08: 00000000000045ad R09: 0000000000000ec0 [ 3535.860597] R10: 0000000000000001 R11: ffff9fdf26c3ce4e R12: ffff9fdf9e72c000 [ 3535.867794] R13: 0000000000000000 R14: fffffffffffffff2 R15: ffff9fdfc82cdd00 [ 3535.874990] FS: 0000000000000000(0000) GS:ffff9fdfcfe80000(0000) knlGS:0000000000000000 [ 3535.883152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3535.888948] CR2: 0000000000000018 CR3: 0000000bde724004 CR4: 00000000007626e0 [ 3535.896145] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3535.903342] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3535.910538] PKRU: 55555554 [ 3535.913267] Call Trace: [ 3535.915736] xdp_do_generic_redirect+0x7a/0x310 [ 3535.920310] do_xdp_generic.part.117+0x285/0x370 [ 3535.924970] tun_get_user+0x5b9/0x1260 [tun] [ 3535.929279] tun_sendmsg+0x52/0x70 [tun] [ 3535.933237] handle_tx+0x2ad/0x5f0 [vhost_net] [ 3535.937721] vhost_worker+0xa5/0x100 [vhost] [ 3535.942030] kthread+0xf5/0x130 [ 3535.945198] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 3535.950031] ? kthread_bind+0x10/0x10 [ 3535.953727] ret_from_fork+0x35/0x40 [ 3535.957334] Code: 0e 74 15 83 f8 10 75 05 e9 49 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 29 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 49 a9 b3 ff 31 c0 c3 [ 3535.976387] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffffb4bc47bf7c58 [ 3535.982883] CR2: 0000000000000018 [ 3535.987096] ---[ end trace 383b299dd1430240 ]--- [ 3536.131325] Kernel panic - not syncing: Fatal exception [ 3536.137484] Kernel Offset: 0x26a00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 3536.281406] ---[ end Kernel panic - not syncing: Fatal exception ]--- And a kernel with generic case fixed still panics in tun driver XDP redirect, because it disabled only preemption, but not bh. [ 2055.128746] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 2055.136662] PGD 0 P4D 0 [ 2055.139219] Oops: 0000 [#1] SMP PTI [ 2055.142736] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel ipmi_ssif crypto_simd enclosure cryptd hpwdt glue_helper ioatdma hpilo wmi dca pcspkr ipmi_si acpi_power_meter ipmi_devintf shpchp mei_me ipmi_msghandler mei lpc_ich sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm i40e smartpqi tg3 scsi_transport_sas crc32c_intel i2c_core ptp pps_core [ 2055.206142] CPU: 6 PID: 1693 Comm: vhost-1683 Tainted: G W 4.17.0-rc5-fix-tun+ #1 [ 2055.215011] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 2055.223617] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 2055.228624] RSP: 0018:ffff998b07607cc0 EFLAGS: 00010246 [ 2055.233892] RAX: ffff8dbd8e235700 RBX: ffff8dbd8ff21c40 RCX: 0000000000000004 [ 2055.241089] RDX: ffff998b097a9000 RSI: 0000000000000000 RDI: 0000000000000000 [ 2055.248286] RBP: 0000000000000000 R08: 00000000000065a8 R09: 0000000000005d80 [ 2055.255483] R10: 0000000000000040 R11: ffff8dbcf0100000 R12: ffff998b097a9000 [ 2055.262681] R13: ffff8dbd8c98c000 R14: 0000000000000000 R15: ffff998b07607d78 [ 2055.269879] FS: 0000000000000000(0000) GS:ffff8dbd8ff00000(0000) knlGS:0000000000000000 [ 2055.278039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2055.283834] CR2: 0000000000000018 CR3: 0000000c0c8cc005 CR4: 00000000007626e0 [ 2055.291030] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2055.298227] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2055.305424] PKRU: 55555554 [ 2055.308153] Call Trace: [ 2055.310624] xdp_do_redirect+0x7b/0x380 [ 2055.314499] tun_get_user+0x10fe/0x12a0 [tun] [ 2055.318895] tun_sendmsg+0x52/0x70 [tun] [ 2055.322852] handle_tx+0x2ad/0x5f0 [vhost_net] [ 2055.327337] vhost_worker+0xa5/0x100 [vhost] [ 2055.331646] kthread+0xf5/0x130 [ 2055.334813] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 2055.339646] ? kthread_bind+0x10/0x10 [ 2055.343343] ret_from_fork+0x35/0x40 [ 2055.346950] Code: 0e 74 15 83 f8 10 75 05 e9 e9 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 c9 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 e9 a9 b3 ff 31 c0 c3 [ 2055.366004] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffff998b07607cc0 [ 2055.372500] CR2: 0000000000000018 [ 2055.375856] ---[ end trace 2a2dcc5e9e174268 ]--- [ 2055.523626] Kernel panic - not syncing: Fatal exception [ 2055.529796] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2055.677539] ---[ end Kernel panic - not syncing: Fatal exception ]--- v2: - Removed preempt_disable/enable since local_bh_disable will prevent preemption as well, feedback from Jason Wang. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29be2net: Fix error detection logic for BE3Suresh Reddy1-1/+3
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0) in be_detect_error() to know whether the error is valid error or not Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3") Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: qmi_wwan: Add Netgear Aircard 779SJosh Hill1-0/+1
Add support for Netgear Aircard 779S Signed-off-by: Josh Hill <josh@joshuajhill.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAGPetr Machata1-0/+5
VLAN 1 is internally used for untagged traffic. Prevent creation of explicit netdevice for that VLAN, because that currently isn't supported and leads to the NULL pointer dereference cited below. Fix by preventing creation of VLAN devices with VID of 1 over mlxsw devices or LAG devices that involve mlxsw devices. [ 327.175816] ================================================================================ [ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12 [ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid' [ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11 [ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 327.219872] Call Trace: [ 327.222384] dump_stack+0xc3/0x12b [ 327.234007] ubsan_epilogue+0x9/0x49 [ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0 [ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7 [ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum] [ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum] [ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum] [ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum] [ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum] [ 327.367863] notifier_call_chain+0x4c/0x150 [ 327.372128] __netdev_upper_dev_link+0x1b3/0x260 [ 327.399450] vrf_add_slave+0xce/0x170 [vrf] [ 327.403703] do_setlink+0x658/0x1d70 [ 327.508998] rtnl_newlink+0x908/0xf20 [ 327.559128] rtnetlink_rcv_msg+0x50c/0x720 [ 327.571720] netlink_rcv_skb+0x16a/0x1f0 [ 327.583450] netlink_unicast+0x2ca/0x3e0 [ 327.599305] netlink_sendmsg+0x3e2/0x7f0 [ 327.616655] sock_sendmsg+0x76/0xc0 [ 327.620207] ___sys_sendmsg+0x494/0x5d0 [ 327.666117] __sys_sendmsg+0xc2/0x130 [ 327.690953] do_syscall_64+0x66/0x370 [ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 327.699782] RIP: 0033:0x7f4c2f3f8037 [ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037 [ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003 [ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630 [ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000 [ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000 [ 327.747096] ================================================================================ Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking") Suggested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUsHao Wei Tee1-5/+5
When there are 16 or more logical CPUs, we request for `IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of IRQs, but later on we compare the number of IRQs returned to nr_online_cpus+2 instead of max_irqs, the latter being what we actually asked for. This ends up setting num_rx_queues to 17 which causes lots of out-of-bounds array accesses later on. Compare to max_irqs instead, and also add an assertion in case num_rx_queues > IWM_MAX_RX_HW_QUEUES. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551 Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Hao Wei Tee <angelsl@in04.sg> Tested-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29Revert "rt2800: use TXOP_BACKOFF for probe frames"Stanislaw Gruszka1-4/+3
This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e. In some situations when we set TXOP_BACKOFF, the probe frame is not sent at all. What it worse then sending probe frame as part of AMPDU and can degrade 11n performance to 11g rates. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-28net: netsec: reduce DMA mask to 40 bitsArd Biesheuvel1-2/+2
The netsec network controller IP can drive 64 address bits for DMA, and the DMA mask is set accordingly in the driver. However, the SynQuacer SoC, which is the only silicon incorporating this IP at the moment, integrates this IP in a manner that leaves address bits [63:40] unconnected. Up until now, this has not resulted in any problems, given that the DDR controller doesn't decode those bits to begin with. However, recent firmware updates for platforms incorporating this SoC allow the IOMMU to be enabled, which does decode address bits [47:40], and allocates top down from the IOVA space, producing DMA addresses that have bits set that have been left unconnected. Both the DT and ACPI (IORT) descriptions of the platform take this into account, and only describe a DMA address space of 40 bits (using either dma-ranges DT properties, or DMA address limits in IORT named component nodes). However, even though our IOMMU and bus layers may take such limitations into account by setting a narrower DMA mask when creating the platform device, the netsec probe() entrypoint follows the common practice of setting the DMA mask uncondionally, according to the capabilities of the IP block itself rather than to its integration into the chip. It is currently unclear what the correct fix is here. We could hack around it by only setting the DMA mask if it deviates from its default value of DMA_BIT_MASK(32). However, this makes it impossible for the bus layer to use DMA_BIT_MASK(32) as the bus limit, and so it appears that a more comprehensive approach is required to take DMA limits imposed by the SoC as a whole into account. In the mean time, let's limit the DMA mask to 40 bits. Given that there is currently only one SoC that incorporates this IP, this is a reasonable approach that can be backported to -stable and buys us some time to come up with a proper fix going forward. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Cc: Robin Murphy <robin.murphy@arm.com> Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Masahisa Kojima <masahisa.kojima@linaro.org> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25ibmvnic: Fix partial success login retriesThomas Falcon1-1/+6
In its current state, the driver will handle backing device login in a loop for a certain number of retries while the device returns a partial success, indicating that the driver may need to try again using a smaller number of resources. The variable it checks to continue retrying may change over the course of operations, resulting in reallocation of resources but exits without sending the login attempt. Guard against this by introducing a boolean variable that will retain the state indicating that the driver needs to reattempt login with backing device firmware. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25mlx4_core: allocate ICM memory in page size chunksQing Huang1-7/+9
When a system is under memory presure (high usage with fragments), the original 256KB ICM chunk allocations will likely trigger kernel memory management to enter slow path doing memory compact/migration ops in order to complete high order memory allocations. When that happens, user processes calling uverb APIs may get stuck for more than 120s easily even though there are a lot of free pages in smaller chunks available in the system. Syslog: ... Dec 10 09:04:51 slcc03db02 kernel: [397078.572732] INFO: task oracle_205573_e:205573 blocked for more than 120 seconds. ... With 4KB ICM chunk size on x86_64 arch, the above issue is fixed. However in order to support smaller ICM chunk size, we need to fix another issue in large size kcalloc allocations. E.g. Setting log_num_mtt=30 requires 1G mtt entries. With the 4KB ICM chunk size, each ICM chunk can only hold 512 mtt entries (8 bytes for each mtt entry). So we need a 16MB allocation for a table->icm pointer array to hold 2M pointers which can easily cause kcalloc to fail. The solution is to use kvzalloc to replace kcalloc which will fall back to vmalloc automatically if kmalloc fails. Signed-off-by: Qing Huang <qing.huang@oracle.com> Acked-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24enic: set DMA mask to 47 bitGovindarajulu Varadarajan1-4/+4
In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ppp: remove the PPPIOCDETACH ioctlEric Biggers1-22/+5
The PPPIOCDETACH ioctl effectively tries to "close" the given ppp file before f_count has reached 0, which is fundamentally a bad idea. It does check 'f_count < 2', which excludes concurrent operations on the file since they would only be possible with a shared fd table, in which case each fdget() would take a file reference. However, it fails to account for the fact that even with 'f_count == 1' the file can still be linked into epoll instances. As reported by syzbot, this can trivially be used to cause a use-after-free. Yet, the only known user of PPPIOCDETACH is pppd versions older than ppp-2.4.2, which was released almost 15 years ago (November 2003). Also, PPPIOCDETACH apparently stopped working reliably at around the same time, when the f_count check was added to the kernel, e.g. see https://lkml.org/lkml/2002/12/31/83. Also, the current 'f_count < 2' check makes PPPIOCDETACH only work in single-threaded applications; it always fails if called from a multithreaded application. All pppd versions released in the last 15 years just close() the file descriptor instead. Therefore, instead of hacking around this bug by exporting epoll internals to modules, and probably missing other related bugs, just remove the PPPIOCDETACH ioctl and see if anyone actually notices. Leave a stub in place that prints a one-time warning and returns EINVAL. Reported-by: syzbot+16363c99d4134717c05b@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24net/mlx5: IPSec, Fix a race between concurrent sandbox QP commandsYossi Kuperman1-7/+5
Sandbox QP Commands are retired in the order they are sent. Outstanding commands are stored in a linked-list in the order they appear. Once a response is received and the callback gets called, we pull the first element off the pending list, assuming they correspond. Sending a message and adding it to the pending list is not done atomically, hence there is an opportunity for a race between concurrent requests. Bind both send and add under a critical section. Fixes: bebb23e6cb02 ("net/mlx5: Accel, Add IPSec acceleration interface") Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24net/mlx5e: When RXFCS is set, add FCS data into checksum calculationEran Ben Elisha1-0/+42
When RXFCS feature is enabled, the HW do not strip the FCS data, however it is not present in the checksum calculated by the HW. Fix that by manually calculating the FCS checksum and adding it to the SKB checksum field. Add helper function to find the FCS data for all SKB forms (linear, one fragment or more). Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-23net/mlx4: Fix irq-unsafe spinlock usageJack Morgenstein1-2/+2
spin_lock/unlock was used instead of spin_un/lock_irq in a procedure used in process space, on a spinlock which can be grabbed in an interrupt. This caused the stack trace below to be displayed (on kernel 4.17.0-rc1 compiled with Lock Debugging enabled): [ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I [ 154.675856] ----------------------------------------------------- [ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core] [ 154.700927] and this task is already holding: [ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib] [ 154.718028] which would create a new lock dependency: [ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.} [ 154.731922] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 154.740798] (&(&cq->lock)->rlock){..-.} [ 154.740800] ... which became SOFTIRQ-irq-safe at: [ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50 [ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib] [ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib] ... to a SOFTIRQ-irq-unsafe lock: [ 154.815603] (&(&qp_table->lock)->rlock){+.+.} [ 154.815604] ... which became SOFTIRQ-irq-unsafe at: [ 154.827718] ... [ 154.827720] _raw_spin_lock+0x35/0x50 [ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core] [ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core] Since mlx4_qp_lookup() is called only in process space, we can simply replace the spin_un/lock calls with spin_un/lock_irq calls. Fixes: 6dc06c08bef1 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: phy: broadcom: Fix bcm_write_exp()Florian Fainelli3-5/+12
On newer PHYs, we need to select the expansion register to write with setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior to being migrated to generic code under bcm-phy-lib.c which unfortunately used the older implementation from the BCM54xx days. Fix this by creating an inline stub: bcm_write_exp_sel() which adds the correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY and BCM7xxx PHY drivers which require setting these bits. broadcom.c is unchanged because some PHYs even use a different selector method, so let them specify it directly (e.g: SerDes secondary selector). Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: phy: broadcom: Fix auxiliary control register readsFlorian Fainelli1-1/+1
We are currently doing auxiliary control register reads with the shadow register value 0b111 (0x7) which incidentally is also the selector value that should be present in bits [2:0]. Fix this by using the appropriate selector mask which is defined (MII_BCM54XX_AUXCTL_SHDWSEL_MASK). This does not have a functional impact yet because we always access the MII_BCM54XX_AUXCTL_SHDWSEL_MISC (0x7) register in the current code. This might change at some point though. Fixes: 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase messageColin Ian King1-1/+1
Trivial fix to spelling mistake in mlx4_dbg debug message and also change the phrasing of the message so that is is more readable Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23ibmvnic: Only do H_EOI for mobility eventsNathan Fontenot1-6/+9
When enabling the sub-CRQ IRQ a previous update sent a H_EOI prior to the enablement to clear any pending interrupts that may be present across a partition migration. This fixed a firmware bug where a migration could erroneously indicate that a H_EOI was pending. The H_EOI should only be sent when enabling during a mobility event though. Doing so at other time could wrong and can produce extra driver output when IRQs are enabled when doing TX completion. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23tuntap: correctly set SOCKWQ_ASYNC_NOSPACEJason Wang1-4/+15
When link is down, writes to the device might fail with -EIO. Userspace needs an indication when the status is resolved. As a fix, tun_net_open() attempts to wake up writers - but that is only effective if SOCKWQ_ASYNC_NOSPACE has been set in the past. This is not the case of vhost_net which only poll for EPOLLOUT after it meets errors during sendmsg(). This patch fixes this by making sure SOCKWQ_ASYNC_NOSPACE is set when socket is not writable or device is down to guarantee EPOLLOUT will be raised in either tun_chr_poll() or tun_sock_write_space() after device is up. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <edumazet@google.com> Fixes: 1bd4978a88ac2 ("tun: honor IFF_UP in tun_get_user()") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23virtio-net: fix leaking page for gso packet during mergeable XDPJason Wang1-8/+7
We need to drop refcnt to xdp_page if we see a gso packet. Otherwise it will be leaked. Fixing this by moving the check of gso packet above the linearizing logic. While at it, remove useless comment as well. Cc: John Fastabend <john.fastabend@gmail.com> Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23virtio-net: correctly check num_buf during err pathJason Wang1-1/+1
If we successfully linearize the packet, num_buf will be set to zero which may confuse error handling path which assumes num_buf is at least 1 and this can lead the code tries to pop the descriptor of next buffer. Fixing this by checking num_buf against 1 before decreasing. Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23virtio-net: correctly transmit XDP buff after linearizingJason Wang1-1/+1
We should not go for the error path after successfully transmitting a XDP buffer after linearizing. Since the error path may try to pop and drop next packet and increase the drop counters. Fixing this by simply drop the refcnt of original page and go for xmit path. Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23virtio-net: correctly redirect linearized packetJason Wang1-1/+1
After a linearized packet was redirected by XDP, we should not go for the err path which will try to pop buffers for the next packet and increase the drop counter. Fixing this by just drop the page refcnt for the original page. Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT") Reported-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23Merge tag 'mac80211-for-davem-2018-05-23' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A handful of fixes: * hwsim radio dump wasn't working for the first radio * mesh was updating statistics incorrectly * a netlink message allocation was possibly too short * wiphy name limit was still too long * in certain cases regdb query could find a NULL pointer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22pcnet32: add an error handling path in pcnet32_probe_pci()Bo Chen1-3/+7
Make sure to invoke pci_disable_device() when errors occur in pcnet32_probe_pci(). Signed-off-by: Bo Chen <chenbo@pdx.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22qed: Fix mask for physical address in ILT entryShahed Shaikh1-1/+1
ILT entry requires 12 bit right shifted physical address. Existing mask for ILT entry of physical address i.e. ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit address because upper 8 bits of 64 bit address were getting masked which resulted in completer abort error on PCIe bus due to invalid address. Fix that mask to handle 64bit physical address. Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net: fec: Add a SPDX identifierFabio Estevam1-0/+1
Currently there is no license information in the header of this file. The MODULE_LICENSE field contains ("GPL"), which means GNU Public License v2 or later, so add a corresponding SPDX license identifier. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net: fec: ptp: Switch to SPDX identifierFabio Estevam1-13/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22mac80211_hwsim: Fix radio dump for radio idx 0Andrew Zaborowski1-2/+2
Since 6335698e24ec11e1324b916177da6721df724dd8 the radio with idx of 0 will not get dumped in HWSIM_CMD_GET_RADIO because of the last_idx checks. Offset cb->args[0] by 1 similarly to what is done in nl80211.c. Fixes: 6335698e24ec ("mac80211_hwsim: add generation count for netlink dump operation") Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18cxgb4: fix offset in collecting TX rate limit infoRahul Lakkireddy1-19/+9
Correct the indirect register offsets in collecting TX rate limit info in UP CIM logs. Also, T5 doesn't support these indirect register offsets, so remove them from collection logic. Fixes: be6e36d916b1 ("cxgb4: collect TX rate limit info in UP CIM logs") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18sh_eth: Change platform check to CONFIG_ARCH_RENESASGeert Uytterhoeven1-1/+1
Since commit 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS") is CONFIG_ARCH_RENESAS a more appropriate platform check than the legacy CONFIG_ARCH_SHMOBILE, hence use the former. Renesas SuperH SH-Mobile SoCs are still covered by the CONFIG_CPU_SH4 check. This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near future. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17ibmvnic: Fix statistics buffers memory leakThomas Falcon1-9/+15
Move initialization of statistics buffers from ibmvnic_init function into ibmvnic_probe. In the current state, ibmvnic_init will be called again during a device reset, resulting in the allocation of new buffers without freeing the old ones. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17ibmvnic: Fix non-fatal firmware error resetThomas Falcon1-2/+1
It is not necessary to disable interrupt lines here during a reset to handle a non-fatal firmware error. Move that call within the code block that handles the other cases that do require interrupts to be disabled and re-enabled. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17ibmvnic: Free coherent DMA memory if FW map failedThomas Falcon1-0/+1
If the firmware map fails for whatever reason, remember to free up the memory after. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16tuntap: fix use after free during releaseJason Wang1-1/+1
After commit b196d88aba8a ("tun: fix use after free for ptr_ring") we need clean up tx ring during release(). But unfortunately, it tries to do the cleanup blindly after socket were destroyed which will lead another use-after-free. Fix this by doing the cleanup before dropping the last reference of the socket in __tun_detach(). Reported-by: Andrei Vagin <avagin@virtuozzo.com> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Fixes: b196d88aba8a ("tun: fix use after free for ptr_ring") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16qed: Fix LL2 race during connection terminateMichal Kalderon1-10/+14
Stress on qedi/qedr load unload lead to list_del corruption. This is due to ll2 connection terminate freeing resources without verifying that no more ll2 processing will occur. This patch unregisters the ll2 status block before terminating the connection to assure this race does not occur. Fixes: 1d6cff4fca4366 ("qed: Add iSCSI out of order packet handling") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16qed: Fix possibility of list corruption during rmmod flowsMichal Kalderon1-1/+10
The ll2 flows of flushing the txq/rxq need to be synchronized with the regular fp processing. Caused list corruption during load/unload stress tests. Fixes: 0a7fb11c23c0f ("qed: Add Light L2 support") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16qed: LL2 flush isles when connection is closedMichal Kalderon1-0/+26
Driver should free all pending isles once it gets a FLUSH cqe from FW. Part of iSCSI out of order flow. Fixes: 1d6cff4fca4366 ("qed: Add iSCSI out of order packet handling") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: 8390: ne: Fix accidentally removed RBTX4927 supportGeert Uytterhoeven1-1/+3
The configuration settings for RBTX4927 were accidentally removed, leading to a silently broken network interface. Re-add the missing settings to fix this. Fixes: 8eb97ff5a4ec941d ("net: 8390: remove m32r specific bits") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: dsa: bcm_sf2: Fix IPv6 rule half deletionFlorian Fainelli1-4/+7
It was possible to delete only one half of an IPv6, which would leave the second half still programmed and possibly in use. Instead of checking for the unused bitmap, we need to check the unique bitmap, and refuse any deletion that does not match that criteria. We also need to move that check from bcm_sf2_cfp_rule_del_one() into its caller: bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second halves anymore that would not pass the first test. Fixes: ba0696c22e7c ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: dsa: bcm_sf2: Fix IPv6 rules and chain IDFlorian Fainelli1-9/+11
We had several issues that would make the programming of IPv6 rules both inconsistent and error prone: - the chain ID that we would be asking the hardware to put in the packet's Broadcom tag would be off by one, it would return one of the two indexes, but not the one user-space specified - when an user specified a particular location to insert a CFP rule at, we would not be returning the same index, which would be confusing if nothing else - finally, like IPv4, it would be possible to overflow the last entry by re-programming it Fix this by swapping the usage of rule_index[0] and rule_index[1] where relevant in order to return a consistent and correct user-space experience. Fixes: ba0696c22e7c ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: dsa: bcm_sf2: Fix RX_CLS_LOC_ANY overwrite for last ruleFlorian Fainelli1-1/+4
When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we would be able to overwrite the last rules because of a number of issues. The IPv4 code path would not be checking that rule_index is within bounds, and it would also only be allowed to pick up rules from range 0..126 instead of the full 0..127 range. This would lead us to allow overwriting the last rule when we let the kernel pick-up the location. Fixes: 3306145866b6 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: phy: micrel: add 125MHz reference clock workaroundMarkus Niebel1-0/+31
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be used as reference clock for the MAC unit. The clock signal must meet the RGMII requirements to ensure the correct data transmission between the MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle requirement if the phy is configured as slave. For a complete describtion look at the errata sheets: DS80000691D or DS80000692D. The errata sheet recommends to force the phy into master mode whenever there is a 1000Base-T link-up as work around. Only set the "micrel,force-master" property if you use the phy reference clock provided by CLK125_NDO pin as MAC reference clock in your application. Attenation, this workaround is only usable if the link partner can be configured to slave mode for 1000Base-T. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> [m.felsch@pengutronix.de: fix dt-binding documentation] [m.felsch@pengutronix.de: use already existing result var for read/write] [m.felsch@pengutronix.de: add error handling] [m.felsch@pengutronix.de: add more comments] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16ipvlan: call netdevice notifier when master mac address changedKeefe Liu1-1/+3
When master device's mac has been changed, the commit 32c10bbfe914 ("ipvlan: always use the current L2 addr of the master") makes the IPVlan devices's mac changed also, but it doesn't do related works such as flush the IPVlan devices's arp table. Signed-off-by: Keefe Liu <liuqifa@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-22 20:46:47 +0000