summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-02-21Revert "ath10k: Search SMBIOS for OEM board file extension"Kalle Valo2-100/+3
This reverts commit f2593cb1b29185d38db706cbcbe22ed538720ae1. Paul reported that this patch with older board-2.bin ath10k initialisation fails on Dell XPS 13: ath10k_pci 0000:3a:00.0: failed to fetch board data for bus=pci,vendor=168c, device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0520 from ath10k/QCA6174/hw3.0/board-2.bin The reason is that the older board-2.bin does not have the variant version of the image name and ath10k does not fallback to the older naming scheme. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=185621#c9 Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21bnxt_en: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure bp->dev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: enable building on 64-bit platformsThomas Petazzoni2-15/+19
The mvpp2 is going to be extended to support the Marvell Armada 7K/8K platform, which is ARM64. As a preparation to this work, this commit enables building the mvpp2 driver on ARM64, by: - Adjusting the Kconfig dependency - Fixing the types used in the driver so that they are 32/64-bits compliant. We use dma_addr_t for DMA addresses, and unsigned long for virtual addresses. It is worth mentioning that after this commit, the driver is for now still only used on 32-bits platforms, and will only work on 32-bits platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: switch to build_skb() in the RX pathThomas Petazzoni1-22/+57
This commit adapts the mvpp2 RX path to use the build_skb() method. Not only build_skb() is now the recommended mechanism, but it also simplifies the addition of support for the PPv2.2 variant. Indeed, without build_skb(), we have to keep track for each RX descriptor of the physical address of the packet buffer, and the virtual address of the SKB. However, in PPv2.2 running on 64 bits platform, there is not enough space in the descriptor to store the virtual address of the SKB. So having to take care only of the address of the packet buffer, and building the SKB upon reception helps in supporting PPv2.2. The implementation is fairly straightforward: - mvpp2_skb_alloc() is renamed to mvpp2_buf_alloc() and no longer allocates a SKB. Instead, it allocates a buffer using the new mvpp2_frag_alloc() function, with enough space for the data and SKB. - The initialization of the RX buffers in mvpp2_bm_bufs_add() as well as the refill of the RX buffers in mvpp2_rx_refill() is adjusted accordingly. - Finally, the mvpp2_rx() is modified to use build_skb(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: simplify MVPP2_PRS_RI_* definitionsThomas Petazzoni1-8/+8
Some of the MVPP2_PRS_RI_* definitions use the ~(value) syntax, which doesn't compile nicely on 64-bit. Moreover, those definitions are in fact unneeded, since they are always used in combination with a bit mask that ensures only the appropriate bits are modified. Therefore, such definitions should just be set to 0x0. In addition, as suggested by Russell King, we change the _MASK definitions to also use the BIT() macro so that it is clear they are related to the values defined afterwards. For example: #define MVPP2_PRS_RI_L2_CAST_MASK 0x600 #define MVPP2_PRS_RI_L2_UCAST ~(BIT(9) | BIT(10)) #define MVPP2_PRS_RI_L2_MCAST BIT(9) #define MVPP2_PRS_RI_L2_BCAST BIT(10) becomes #define MVPP2_PRS_RI_L2_CAST_MASK (BIT(9) | BIT(10)) #define MVPP2_PRS_RI_L2_UCAST 0x0 #define MVPP2_PRS_RI_L2_MCAST BIT(9) #define MVPP2_PRS_RI_L2_BCAST BIT(10) Because the values (MVPP2_PRS_RI_L2_UCAST, MVPP2_PRS_RI_L2_MCAST and MVPP2_PRS_RI_L2_BCAST) are always applied with MVPP2_PRS_RI_L2_CAST_MASK, and therefore there is no need for MVPP2_PRS_RI_L2_UCAST to be defined as ~(BIT(9) | BIT(10)). It fixes the following warnings when building the driver on a 64-bit platform (which is not possible as of this commit, but will be enabled in a follow-up commit): drivers/net/ethernet/marvell/mvpp2.c: In function ‘mvpp2_prs_mac_promisc_set’: drivers/net/ethernet/marvell/mvpp2.c:524:33: warning: large integer implicitly truncated to unsigned type [-Woverflow] #define MVPP2_PRS_RI_L2_UCAST ~(BIT(9) | BIT(10)) ^ drivers/net/ethernet/marvell/mvpp2.c:1459:33: note: in expansion of macro ‘MVPP2_PRS_RI_L2_UCAST’ mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L2_UCAST, Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULTThomas Petazzoni1-1/+1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove unused register definitionsThomas Petazzoni1-4/+0
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: simplify mvpp2_bm_bufs_add()Thomas Petazzoni1-3/+1
The mvpp2_bm_bufs_add() currently creates a fake cookie by calling mvpp2_bm_cookie_pool_set(), just to be able to call mvpp2_pool_refill(). But all what mvpp2_pool_refill() does is extract the pool ID from the cookie, and call mvpp2_bm_pool_put() with this ID. Instead of doing this convoluted thing, just call mvpp2_bm_pool_put() directly, since we have the BM pool ID. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: drop useless fields in mvpp2_bm_pool and related codeThomas Petazzoni1-15/+3
This commit drops dead code from the mvpp2 driver. The 'in_use' and 'in_use_thresh' fields of 'struct mvpp2_bm_pool' are incremented/decremented/initialized in various places. But they are only used in one place: if (is_recycle && (atomic_read(&bm_pool->in_use) < bm_pool->in_use_thresh)) return 0; However 'is_recycle', passed as argument to mvpp2_rx_refill() is always false. So in fact, this code is never reached, and the 'is_recycle' argument is useless. So let's drop this code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'Thomas Petazzoni1-3/+0
This commit remove a field of 'struct mvpp2_tx_queue' that is not used anywhere. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: release reference to txq_cpu[] entry after unmappingThomas Petazzoni1-5/+4
The mvpp2_txq_bufs_free() function is called upon TX completion to DMA unmap TX buffers, and free the corresponding SKBs. It gets the references to the SKB to free and the DMA buffer to unmap from a per-CPU txq_pcpu data structure. However, the code currently increments the pointer to the next entry before doing the DMA unmap and freeing the SKB. It does not cause any visible problem because for a given SKB the TX completion is guaranteed to take place on the CPU where the TX was started. However, it is much more logical to increment the pointer to the next entry once the current entry has been completely unmapped/released. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()Thomas Petazzoni1-2/+29
When configuring the MVPP2_ISR_RX_THRESHOLD_REG with the RX coalescing time threshold, we do not check for the maximum allowed value supported by the driver, which means we might overflow and use a bogus value. This commit adds a check for this situation, and if a value higher than what is supported by the hardware is provided, then we use the maximum value supported by the hardware. In order to achieve this in a way that avoids overflow and rounding errors, we introduce two utility functions mvpp2_usec_to_cycles() and cycles_to_usec(). Many thanks to Russell King for suggesting this implementation. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()Thomas Petazzoni1-3/+4
Currently, mvpp2_rx_pkts_coal_set() does the following to avoid setting a too large value for the RX coalescing by packet number: val = (pkts & MVPP2_OCCUPIED_THRESH_MASK); This means that if you set a value that is slightly higher the the maximum number of packets, you in fact get a very low value. It makes a lot more sense to simply check if the value is too high, and if it's too high, limit it to the maximum possible value. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_setThomas Petazzoni1-12/+8
As noticed by Russell King, the last argument of mvpp2_rx_{pkts,time}_coal_set() is useless, since the packet/time coalescing value is already stored in the 'struct mvpp2_rx_queue *' passed as argument to these functions. So passing the packet/time value as an additional argument, and setting them again in the mvpp2_rx_queue structure is useles. This commit therefore gets rid of this additional argument, assuming the caller has assigned the appropriate value to rxq->pkts_coal or rxq->time_coal before calling the respective functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()Thomas Petazzoni1-1/+1
When TX descriptors are filled in, the buffer DMA address is split between the tx_desc->buf_phys_addr field (high-order bits) and tx_desc->packet_offset field (5 low-order bits). However, when we re-calculate the DMA address from the TX descriptor in mvpp2_txq_inc_put(), we do not take tx_desc->packet_offset into account. This means that when the DMA address is not aligned on a 32 bytes boundary, we end up calling dma_unmap_single() with a DMA address that was not the one returned by dma_map_single(). This inconsistency is detected by the kernel when DMA_API_DEBUG is enabled. We fix this problem by properly calculating the DMA address in mvpp2_txq_inc_put(). Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21macsec: fix validation failed in asynchronous operation.Lee Ryder1-0/+3
MACSec test failed when asynchronous crypto operations is used. It encounters packet validation failed since macsec_skb_cb(skb)->valid is always 'false'. This patch adds missing "macsec_skb_cb(skb)->valid = true" in macsec_decrypt_done() when "err == 0". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21virtio-net: switch to use build_skb() for small bufferJason Wang1-75/+63
This patch switch to use build_skb() for small buffer which can have better performance for both TCP and XDP (since we can work at page before skb creation). It also remove lots of XDP codes since both mergeable and small buffer use page frag during refill now. Before | After XDP_DROP(xdp1) 64B : 11.1Mpps | 14.4Mpps Tested with xdp1/xdp2/xdp_ip_tx_tunnel and netperf. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21vxlan: remove unused variable saddr in neigh_reduceRoopa Prabhu1-2/+1
silences the below warning: drivers/net/vxlan.c: In function ‘neigh_reduce’: drivers/net/vxlan.c:1599:25: warning: variable ‘saddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21vxlan: add changelink supportRoopa Prabhu1-113/+270
This patch adds changelink rtnl op support for vxlan netdevs. code changes involve: - refactor vxlan_newlink into vxlan_nl2conf to be used by vxlan_newlink and vxlan_changelink - vxlan_nl2conf and vxlan_dev_configure take a changelink argument to isolate changelink checks and updates. - Allow changing only a few attributes: - return -EOPNOTSUPP for attributes that cannot be changed for now. Incremental patches can make the non-supported one available in the future if needed. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20virito-net: set queues after reset during xdp_setJason Wang1-20/+8
We set queues before reset which will cause a crash[1]. This is because is_xdp_raw_buffer_queue() depends on the old xdp queue pairs number to do the correct detection. So fix this by - passing xdp queue pairs and current queue pairs to virtnet_reset() - change vi->xdp_qp after reset but before refill, to make sure both free_unused_bufs() and refill can make correct detection of XDP. - remove the duplicated queue pairs setting before virtnet_reset() since we will do it inside virtnet_reset() [1] [ 74.328168] general protection fault: 0000 [#1] SMP [ 74.328625] Modules linked in: nfsd xfs libcrc32c virtio_net virtio_pci [ 74.329117] CPU: 0 PID: 2849 Comm: xdp2 Not tainted 4.10.0-rc7+ #499 [ 74.329577] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 [ 74.330424] task: ffff88007a894000 task.stack: ffffc90004388000 [ 74.330844] RIP: 0010:skb_release_head_state+0x28/0x80 [ 74.331298] RSP: 0018:ffffc9000438b8d0 EFLAGS: 00010206 [ 74.331676] RAX: 0000000000000000 RBX: ffff88007ad96300 RCX: 0000000000000000 [ 74.332217] RDX: ffff88007fc137a8 RSI: ffff88007fc0db28 RDI: 0001bf00000001be [ 74.332758] RBP: ffffc9000438b8d8 R08: 000000000005008f R09: 00000000000005f9 [ 74.333274] R10: ffff88007d001700 R11: ffffffff820a8a4d R12: ffff88007ad96300 [ 74.333787] R13: 0000000000000002 R14: ffff880036604000 R15: 000077ff80000000 [ 74.334308] FS: 00007fc70d8a7b40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 74.334891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.335314] CR2: 00007fff4144a710 CR3: 000000007ab56000 CR4: 00000000003406f0 [ 74.335830] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.336373] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.336895] Call Trace: [ 74.337086] skb_release_all+0xd/0x30 [ 74.337356] consume_skb+0x2c/0x90 [ 74.337607] free_unused_bufs+0x1ff/0x270 [virtio_net] [ 74.337988] ? vp_synchronize_vectors+0x3b/0x60 [virtio_pci] [ 74.338398] virtnet_xdp+0x21e/0x440 [virtio_net] [ 74.338741] dev_change_xdp_fd+0x101/0x140 [ 74.339048] do_setlink+0xcf4/0xd20 [ 74.339304] ? symcmp+0xf/0x20 [ 74.339529] ? mls_level_isvalid+0x52/0x60 [ 74.339828] ? mls_range_isvalid+0x43/0x50 [ 74.340135] ? nla_parse+0xa0/0x100 [ 74.340400] rtnl_setlink+0xd4/0x120 [ 74.340664] ? cpumask_next_and+0x30/0x50 [ 74.340966] rtnetlink_rcv_msg+0x7f/0x1f0 [ 74.341259] ? sock_has_perm+0x59/0x60 [ 74.341586] ? napi_consume_skb+0xe2/0x100 [ 74.342010] ? rtnl_newlink+0x890/0x890 [ 74.342435] netlink_rcv_skb+0x92/0xb0 [ 74.342846] rtnetlink_rcv+0x23/0x30 [ 74.343277] netlink_unicast+0x162/0x210 [ 74.343677] netlink_sendmsg+0x2db/0x390 [ 74.343968] sock_sendmsg+0x33/0x40 [ 74.344233] SYSC_sendto+0xee/0x160 [ 74.344482] ? SYSC_bind+0xb0/0xe0 [ 74.344806] ? sock_alloc_file+0x92/0x110 [ 74.345106] ? fd_install+0x20/0x30 [ 74.345360] ? sock_map_fd+0x3f/0x60 [ 74.345586] SyS_sendto+0x9/0x10 [ 74.345790] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 74.346086] RIP: 0033:0x7fc70d1b8f6d [ 74.346312] RSP: 002b:00007fff4144a708 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 74.346785] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fc70d1b8f6d [ 74.347244] RDX: 000000000000002c RSI: 00007fff4144a720 RDI: 0000000000000003 [ 74.347683] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 74.348544] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff4144bd90 [ 74.349082] R13: 0000000000000002 R14: 0000000000000002 R15: 00007fff4144cda0 [ 74.349607] Code: 00 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 58 48 85 ff 74 0e 40 f6 c7 01 74 3d 48 c7 43 58 00 00 00 00 48 8b 7b 68 48 85 ff 74 05 <f0> ff 0f 74 20 48 8b 43 60 48 85 c0 74 14 65 8b 15 f3 ab 8d 7e [ 74.351008] RIP: skb_release_head_state+0x28/0x80 RSP: ffffc9000438b8d0 [ 74.351625] ---[ end trace fe6e19fd11cfc80b ]--- Fixes: 2de2f7f40ef9 ("virtio_net: XDP support for adjust_head") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20dpaa_eth: implement ioctl() for PHY-related opsMichael Walle1-0/+8
This commit adds the ndo_do_ioctl() callback which allows the userspace to access PHY registers, for example. This will make mii-diag and similar tools work. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qualcomm: qca: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-8/+10
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20bnxt_en: fix pci cleanup in bnxt_init_one() failure pathSathya Perla1-37/+39
In the bnxt_init_one() failure path, bar1 and bar2 are not being unmapped. This commit fixes this issue. Reorganize the code so that bnxt_init_one()'s failure path and bnxt_remove_one() can call the same function to do the PCI cleanup. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20bnxt_en: Fix NULL pointer dereference in a failure path during open.Michael Chan1-1/+3
If bnxt_hwrm_ring_free() is called during a failure path in bnxt_open(), it is possible that the completion rings have not been allocated yet. In that case, the completion doorbell has not been initialized, and calling bnxt_disable_int() will crash. Fix it by checking that the completion ring has been initialized before writing to the completion ring doorbell. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20bnxt_en: Reject driver probe against all bridge devicesRay Jui1-1/+1
There are additional SoC devices that use the same device ID for bridge and NIC devices. The bnxt driver should reject probe against all bridge devices since it's meant to be used with only endpoint devices. Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed*: Fix link indication raceMintz, Yuval6-12/+33
Driver changes the link properties via communication with the management firmware, and re-reads the resulting link status when it receives an indication that the link has changed. However, there are certain scenarios where such indications might be missing, and so driver also re-reads the current link results without attention in several places. Specifically, it does so during load and when resetting the link. This creates a race where driver might reflect incorrect link status - e.g., when explicit reading of the link status is switched by attention with the changed configuration. Correct this flow by a lock syncronizing the handling of the link indications [both explicit requests and attention]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Don't allocate SBs using main PTTMintz, Yuval1-2/+13
Flows accessing registers require the flow to hold a PTT entry. To protect 'major' load/unload flows a main_ptt is pre-allocated to guarantee such flows wouldn't be blocked by PTT being unavailable. Status block initialization currently uses the main_ptt which is incorrect, as this flow might run concurrently to others [E.g., loading qedr while toggling qede]. That would have dire effects as it means registers' access to device breaks and further read/writes might access incorrect addresses. Instead, when initializing status blocks acquire/release a PTT as part of the flow. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Prevent index problems in loopback testSudarsana Reddy Kalluru1-3/+3
Driver currently utilizes the same loop variable in two nested loops. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Reflect PF link when initializing VFMintz, Yuval1-39/+51
VF learns of the current link state via its bulletin board, which might reflect either the physical link state or some user-configured logical state. Whenever the physical link changes or whnever such a configuration is explicitly made by user the PF driver would update the bulletin that the VF reads. But if neither has happened - i.e., PF still hasn't got a physical link up and no additional configuration was done the VF wouldn't have a valid link information available. Simply reflect the physical link state whenever the VF is initialized. The user could then affect it however he wants. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Free netdevice only after stoping slowpathMintz, Yuval1-2/+8
qed needs to be informed of the removal of the qede interface prior to its actual removal, as qede has some registered callbacks that might get called async to the removal flow. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Initialize lock and slowpath workqueue earlyMintz, Yuval1-2/+7
Need to make sure the slowpath workqueue and the qede lock are ready for the registration of the netdevice, as once registered there's no guarantee those wouldn't be used. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Reserve doorbell BAR space for present CPUsRam Amrani1-1/+1
Reserving doorbell BAR space according to the currently active CPUs may result in a bug if disabled CPUs are later enabled but no doorbell space was reserved for them. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Don't free a QP more than onceRam Amrani1-22/+27
If QP is in reset state then there are no resources to free so avoid freeing any. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Read queue state before releasing bufferRam Amrani1-6/+6
Currently the state is read only after the buffers are relesed. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Release CQ resource under lock on failureRam Amrani1-0/+2
The CQ resource pool is protected by a spin lock. When a CQ creation fails it now deallocates under that lock as well. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Copying tx buffers is not needed.Pavel Belous3-95/+97
This fix removes copying of tx biffers. Now we use ring->buff_fing directly. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed memory allocation if AQ_CFG_RX_FRAME_MAX > 1 ↵Pavel Belous1-1/+3
page. We should allocate the number of pages based on the config parameter AQ_CFG_RX_FRAME_MAX. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed incorrect buff->len calculation.Pavel Belous2-4/+4
rxd_wb->pkt_len is the total length of the packet. If we received a large packet (with length > AQ_CFG_RX_FRAME_MAX) then we will get multiple buffers. We need to fix the length of the last buffer. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Call netdev_register after all initialized.Pavel Belous2-6/+5
netdev_register should be called when everything is initialized. Also we should use net_device->reg_state field instead own "is_ndev_registered" flag to avoid any race. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Null pointer check for aq_nic_ndev_alloc.Pavel Belous1-3/+4
We should check for a null pointer for aq_nic_ndev_alloc instead netdev_priv. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Using NETDEV_TX_OK instead 0.Pavel Belous1-1/+1
Use NETDEV_TX_OK as the return value for successful transmission. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed missing rtnl_unlock.Pavel Belous1-2/+3
rtnl_unlock should be called if error occurred. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Superfluous initialization of "err".Pavel Belous1-7/+1
Fixed superfluous initialization of err. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Using module_pci_driver.Pavel Belous1-19/+1
Remove boilerplate code by using macro module_pci_driver. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixes for aq_ndev_change_mtuPavel Belous2-11/+2
1)Removed unnecessary comparsion "old_mtu == new_mtu". This check is not needed. Function aq_ndev_change_mtu wont be called if mtu has not changed. 2)Removed extra assignment ndev->mtu = new_mtu; This assignment already done inside __dev_set_mtu(). 3)Use core MTU checking for min_mtu. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Removed busy_count field.Pavel Belous2-12/+0
busy_count field and is_busy flag is not needed at all. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Removed extra assignment for skb->dev.Pavel Belous1-1/+0
This assignment is not needed. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qlge: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-15/+21
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes3-109/+123
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: allow application firmware to limit number of SR-IOV VFsJakub Kicinski2-0/+27
Some application firmware projects may choose to limit the number of VFs available below what is specified in PCI capability to be able to reuse the PCIe interface resources. There may also be projects which use cases don't require SR-IOV support at all and therefore don't want to spend time implementing/testing it. Check nfd_vf_cfg_max_vfs firmware symbol to see if application firmware is reporting how many VFs it supports. This mechanism is an opt-in, if symbol is not present we will only look at the PCI capability values. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 11:43:38 +0000