summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner13-26/+26
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds113-113/+113
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds16-127/+170
Pull networking fixes from David Miller: 1) We have to be careful to not try and place a checksum after the end of a rawv6 packet, fix from Dave Jones with help from Hannes Frederic Sowa. 2) Missing memory barriers in tcp_tasklet_func() lead to crashes, from Eric Dumazet. 3) Several bug fixes for the new XDP support in virtio_net, from Jason Wang. 4) Increase headroom in RX skbs in be2net driver to accomodate encapsulations such as geneve. From Kalesh A P. 5) Fix SKB frag unmapping on TX in mvpp2, from Thomas Petazzoni. 6) Pre-pulling UDP headers created a regression in RECVORIGDSTADDR socket option support, from Willem de Bruijn. 7) UID based routing added a potential OOPS in ip_do_redirect() when we see an SKB without a socket attached. We just need it for the network namespace which we can get from skb->dev instead. Fix from Lorenzo Colitti. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) sctp: fix recovering from 0 win with small data chunks sctp: do not loose window information if in rwnd_over virtio-net: XDP support for small buffers virtio-net: remove big packet XDP codes virtio-net: forbid XDP when VIRTIO_NET_F_GUEST_UFO is support virtio-net: make rx buf size estimation works for XDP virtio-net: unbreak csumed packets for XDP_PASS virtio-net: correctly handle XDP_PASS for linearized packets virtio-net: fix page miscount during XDP linearizing virtio-net: correctly xmit linearized page on XDP_TX virtio-net: remove the warning before XDP linearizing mlxsw: spectrum_router: Correctly remove nexthop groups mlxsw: spectrum_router: Don't reflect dead neighs neigh: Send netevent after marking neigh as dead ipv6: handle -EFAULT from skb_copy_bits inet: fix IP(V6)_RECVORIGDSTADDR for udp sockets net/sched: cls_flower: Mandate mask when matching on flags net/sched: act_tunnel_key: Fix setting UDP dst port in metadata under IPv6 stmmac: CSR clock configuration fix net: ipv4: Don't crash if passing a null sk to ip_do_redirect. ...
2016-12-23virtio-net: XDP support for small buffersJason Wang1-25/+87
Commit f600b6905015 ("virtio_net: Add XDP support") leaves the case of small receive buffer untouched. This will confuse the user who want to set XDP but use small buffers. Other than forbid XDP in small buffer mode, let's make it work. XDP then can only work at skb->data since virtio-net create skbs during refill, this is sub optimal which could be optimized in the future. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: remove big packet XDP codesJason Wang1-41/+3
Now we in fact don't allow XDP for big packets, remove its codes. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: forbid XDP when VIRTIO_NET_F_GUEST_UFO is supportJason Wang1-1/+3
When VIRTIO_NET_F_GUEST_UFO is negotiated, host could still send UFO packet that exceeds a single page which could not be handled correctly by XDP. So this patch forbids setting XDP when GUEST_UFO is supported. While at it, forbid XDP for ECN (which comes only from GRO) too to prevent user from misconfiguration. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: make rx buf size estimation works for XDPJason Wang1-0/+3
We don't update ewma rx buf size in the case of XDP. This will lead underestimation of rx buf size which causes host to produce more than one buffers. This will greatly increase the possibility of XDP page linearization. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: unbreak csumed packets for XDP_PASSJason Wang1-2/+2
We drop csumed packet when do XDP for packets. This breaks XDP_PASS when GUEST_CSUM is supported. Fix this by allowing csum flag to be set. With this patch, simple TCP works for XDP_PASS. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: correctly handle XDP_PASS for linearized packetsJason Wang1-2/+8
When XDP_PASS were determined for linearized packets, we try to get new buffers in the virtqueue and build skbs from them. This is wrong, we should create skbs based on existed buffers instead. Fixing them by creating skb based on xdp_page. With this patch "ping 192.168.100.4 -s 3900 -M do" works for XDP_PASS. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: fix page miscount during XDP linearizingJason Wang1-8/+11
We don't put page during linearizing, the would cause leaking when xmit through XDP_TX or the packet exceeds PAGE_SIZE. Fix them by put page accordingly. Also decrease the number of buffers during linearizing to make sure caller can free buffers correctly when packet exceeds PAGE_SIZE. With this patch, we won't get OOM after linearize huge number of packets. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: correctly xmit linearized page on XDP_TXJason Wang1-1/+1
After we linearize page, we should xmit this page instead of the page of first buffer which may lead unexpected result. With this patch, we can see correct packet during XDP_TX. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23virtio-net: remove the warning before XDP linearizingJason Wang1-7/+1
Since we use EWMA to estimate the size of rx buffer. When rx buffer size is underestimated, it's usual to have a packet with more than one buffers. Consider this is not a bug, remove the warning and correct the comment before XDP linearizing. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23Merge tag 'scsi-for-linus' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull late SCSI updates from James Bottomley: "This is mostly stuff which missed the initial pull. There's a new driver: qedi, and some ufs, ibmvscsis and ncr5380 updates plus some assorted driver fixes and also a fix for the bug where if a device goes into a blocked state between configuration and sysfs device add (which can be a long time under async probing) it would become permanently blocked" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits) scsi: avoid a permanent stop of the scsi device's request queue scsi: mpt3sas: Recognize and act on iopriority info scsi: qla2xxx: Fix Target mode handling with Multiqueue changes. scsi: qla2xxx: Add Block Multi Queue functionality. scsi: qla2xxx: Add multiple queue pair functionality. scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls. scsi: qla2xxx: Only allow operational MBX to proceed during RESET. scsi: hpsa: remove memory allocate failure message scsi: Update 3ware driver email addresses scsi: zfcp: fix rport unblock race with LUN recovery scsi: zfcp: do not trace pure benign residual HBA responses at default level scsi: zfcp: fix use-after-"free" in FC ingress path after TMF scsi: libcxgbi: return error if interface is not up scsi: cxgb4i: libcxgbi: add missing module_put() scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion feature scsi: cxgb4i: libcxgbi: add active open cmd for T6 adapters scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idx scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework. scsi: aacraid: remove wildcard for series 9 controllers scsi: ibmvscsi: add write memory barrier to CRQ processing ...
2016-12-23mlxsw: spectrum_router: Correctly remove nexthop groupsIdo Schimmel1-0/+3
At the end of the nexthop initialization process we determine whether the nexthop should be offloaded or not based on the NUD state of the neighbour representing it. After all the nexthops were initialized we refresh the nexthop group and potentially offload it to the device, in case some of the nexthops were resolved. Make the destruction of a nexthop group symmetric with its creation by marking all nexthops as invalid and then refresh the nexthop group to make sure it was removed from the device's tables. Fixes: b2157149b0b0 ("mlxsw: spectrum_router: Add the nexthop neigh activity update") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23mlxsw: spectrum_router: Don't reflect dead neighsIdo Schimmel1-4/+6
When a neighbour is considered to be dead, we should remove it from the device's table regardless of its NUD state. Without this patch, after setting a port to be administratively down we get the following errors when we periodically try to update the kernel about neighbours activity: [ 461.947268] mlxsw_spectrum 0000:03:00.0 sw1p3: Failed to find matching neighbour for IP=192.168.100.2 Fixes: a6bf9e933daf ("mlxsw: spectrum_router: Offload neighbours based on NUD state change") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23stmmac: CSR clock configuration fixjpinto3-6/+6
When testing stmmac with my QoS reference design I checked a problem in the CSR clock configuration that was impossibilitating the phy discovery, since every read operation returned 0x0000ffff. This patch fixes the issue. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-22Merge tag 'wireless-drivers-for-davem-2016-12-22' of ↵David S. Miller5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 All small fixes this time, especially important are the regression fixes for rtlwifi and ath9k. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-21net: fddi: skfp: use %p format specifier for addresses rather than %xColin Ian King3-8/+8
Trivial fix: Addresses should be printed using the %p format specifier rather than using %x. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-21net: mvpp2: fix dma unmapping of TX buffers for fragmentsThomas Petazzoni1-29/+30
Since commit 71ce391dfb784 ("net: mvpp2: enable proper per-CPU TX buffers unmapping"), we are not correctly DMA unmapping TX buffers for fragments. Indeed, the mvpp2_txq_inc_put() function only stores in the txq_cpu->tx_buffs[] array the physical address of the buffer to be DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use skb_headlen(skb) to get the size to be unmapped. Both of this works fine for TX descriptors that are associated directly to a SKB, but not the ones that are used for fragments, with a NULL pointer as skb: - We have a NULL physical address when calling DMA unmap - skb_headlen(skb) crashes because skb is NULL This causes random crashes when fragments are used. To solve this problem, we need to: - Store the physical address of the buffer to be unmapped unconditionally, regardless of whether it is tied to a SKB or not. - Store the length of the buffer to be unmapped, which requires a new field. Instead of adding a third array to store the length of the buffer to be unmapped, and as suggested by David Miller, this commit refactors the tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is added. Therefore, instead of having three arrays to allocate/free, we have a single one, which also improve data locality, reducing the impact on the CPU cache. Fixes: 71ce391dfb784 ("net: mvpp2: enable proper per-CPU TX buffers unmapping") Reported-by: Raphael G <raphael.glon@corp.ovh.com> Cc: Raphael G <raphael.glon@corp.ovh.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-21net: ethernet: stmmac: dwmac-rk: make clk enablement first in powerupHeiko Stübner1-4/+4
Right now the dwmac-rk tries to set up the GRF-specific speed and link options before enabling clocks, phys etc and on previous socs this works because the GRF is supplied on the whole by one clock. On the rk3399 however the GRF (General Register Files) clock-supply has been split into multiple clocks and while there is no specific grf-gmac clock like for other sub-blocks, it seems the mac-specific portions are actually supplied by the general mac clock. This results in hangs on rk3399 boards if the driver is build as module. When built in te problem of course doesn't surface, as the clocks are of course still on at the stage before clock_disable_unused. To solve this, simply move the clock enablement to the first position in the powerup callback. This is also a good idea in general to enable clocks before everything else. Tested on rk3288, rk3368 and rk3399 the dwmac still works on all of them. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-21be2net: Increase skb headroom size to 256 bytesKalesh A P1-1/+1
The driver currently allocates 128 bytes of skb headroom. This was found to be insufficient with some configurations like Geneve tunnels, which resulted in skb head reallocations. Increase the headroom to 256 bytes to fix this. Signed-off-by: Kalesh A P <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-21rtlwifi: Fix kernel oops introduced with commit e49656147359Larry Finger1-1/+2
With commit e49656147359 {"rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb"), the method used to free an skb was changed because the kfree_skb() was inside a spinlock. What was forgotten is that kfree_skb() guards against a NULL value for the argument. Routine dev_kfree_skb_irq() does not, and a test is needed to prevent kernel panics. Fixes: e49656147359 ("rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.9+ Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-21ath9k: do not return early to fix rcu unlockingTobias Klausmann1-1/+1
Starting with commit d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls and suspicious RCU usage: =============================== [ INFO: suspicious RCU usage. ] 4.9.0-rc8 #11 Not tainted ------------------------------- kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/7/0: #0: ( rcu_read_lock ){......} , at: [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k] stack backtrace: CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013 ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001 ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8 ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4 Call Trace: <IRQ> [<ffffffff8132b1e5>] dump_stack+0x68/0x93 [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110 [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200 [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0 [<ffffffff81058631>] irq_exit+0x61/0xd0 [<ffffffff81018d25>] do_IRQ+0x65/0x110 [<ffffffff81672189>] common_interrupt+0x89/0x89 <EOI> [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200 [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20 [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40 [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220 [<ffffffff810336f8>] start_secondary+0x148/0x170 Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-20net/mlx5: use rb_entry()Geliang Tang1-1/+1
To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20ethernet: sfc: Add Kconfig entry for vendor SolarflareTobias Klauser2-1/+21
Since commit 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") there are two drivers for Solarflare devices, but both still show up directly beneath "Ethernet driver support" in the Kconfig. Follow the pattern of other vendors and group them beneath an own vendor Kconfig entry for Solarflare. Cc: Edward Cree <ecree@solarflare.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20net: hix5hd2_gmac: fix compatible strings nameDongpo Li1-6/+7
The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change its compatible string. So we should name all the compatible string with the suffix "-gmac". Creating a new name suffix "-gemac" is unnecessary. We also add another SoC compatible string in dt binding documentation and describe which generic version the SoC belongs to. Fixes: d0fb6ba75dc0 ("net: hix5hd2_gmac: add generic compatible string") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20net: netcp: ethss: fix 10gbe host port tx pri map configurationWingMan Kwok1-1/+2
This patch adds the missing 10gbe host port tx priority map configurations. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20net: netcp: ethss: fix errors in ethtool opsWingMan Kwok1-5/+16
In ethtool ops, it needs to retrieve the corresponding ethss module (gbe or xgbe) from the net_device structure. Prior to this patch, the retrieving procedure only checks for the gbe module. This patch fixes the issue by checking the xgbe module if the net_device structure does not correspond to the gbe module. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20fsl/fman: enable compilation on ARM64Madalin Bucur1-1/+1
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20fsl/fman: A007273 only applies to PPC SoCsMadalin Bucur1-0/+8
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20powerpc: fsl/fman: remove fsl,fman from of_device_ids[]Madalin Bucur1-0/+7
The fsl/fman drivers will use of_platform_populate() on all supported platforms. Call of_platform_populate() to probe the FMan sub-nodes. Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20fsl/fman: fix 1G support for QSGMII interfacesMadalin Bucur1-0/+1
QSGMII ports were not advertising 1G speed. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20net: phy: use boolean dt properties for eee broken modesjbrunet1-3/+15
The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20net: phy: fix sign type error in genphy_config_eee_advertjbrunet1-2/+2
In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is checked to know if the register could be accessed but the result is assigned to a 'u32'. Changing to 'int' to correctly get errors from phy_read_mmd_indirect. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20ath10k: free host-mem with DMA_BIRECTIONAL flagBen Greear1-1/+1
Hopefully this fixes the problem reported by Kalle: Noticed this in my log, but I don't have time to investigate this in detail right now: [ 413.795346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 414.158755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 477.439659] ath10k_pci 0000:02:00.0: could not get mac80211 beacon [ 481.666630] ------------[ cut here ]------------ [ 481.666669] WARNING: CPU: 0 PID: 1978 at lib/dma-debug.c:1155 check_unmap+0x320/0x8e0 [ 481.666688] ath10k_pci 0000:02:00.0: DMA-API: device driver frees DMA memory with different direction [device address=0x000000002d130000] [size=63800 bytes] [mapped with DMA_BIDIRECTIONAL] [unmapped with DMA_TO_DEVICE] [ 481.666703] Modules linked in: ctr ccm ath10k_pci(E-) ath10k_core(E) ath(E) mac80211(E) cfg80211(E) snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq btusb btintel snd_seq_device joydev coret [ 481.671468] CPU: 0 PID: 1978 Comm: rmmod Tainted: G E 4.9.0-rc7-wt+ #54 [ 481.671478] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010 [ 481.671489] ef49dcec c842ee92 c8b5830e ef49dd34 ef49dd20 c80850f5 c8b5a13c ef49dd50 [ 481.671560] 000007ba c8b5830e 00000483 c8461830 c8461830 00000483 ef49ddcc f34e64b8 [ 481.671641] c8b58360 ef49dd3c c80851bb 00000009 00000000 ef49dd34 c8b5a13c ef49dd50 [ 481.671716] Call Trace: [ 481.671731] [<c842ee92>] dump_stack+0x76/0xb4 [ 481.671745] [<c80850f5>] __warn+0xe5/0x100 [ 481.671757] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671769] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671780] [<c80851bb>] warn_slowpath_fmt+0x3b/0x40 [ 481.671791] [<c8461830>] check_unmap+0x320/0x8e0 [ 481.671804] [<c8462054>] debug_dma_unmap_page+0x84/0xa0 [ 481.671835] [<f937cd7a>] ath10k_wmi_free_host_mem+0x9a/0xe0 [ath10k_core] [ 481.671861] [<f9363400>] ath10k_core_destroy+0x50/0x60 [ath10k_core] [ 481.671875] [<f8e13969>] ath10k_pci_remove+0x79/0xa0 [ath10k_pci] [ 481.671889] [<c848d8d8>] pci_device_remove+0x38/0xb0 [ 481.671901] [<c859fe4b>] __device_release_driver+0x7b/0x110 [ 481.671913] [<c85a00e7>] driver_detach+0x97/0xa0 [ 481.671923] [<c859ef8b>] bus_remove_driver+0x4b/0xb0 [ 481.671934] [<c85a0cda>] driver_unregister+0x2a/0x60 [ 481.671949] [<c848c888>] pci_unregister_driver+0x18/0x70 [ 481.671965] [<f8e14dae>] ath10k_pci_exit+0xd/0x25f [ath10k_pci] [ 481.671979] [<c812bb84>] SyS_delete_module+0xf4/0x180 [ 481.671995] [<c81f801b>] ? __might_fault+0x8b/0xa0 [ 481.672009] [<c80037d0>] do_fast_syscall_32+0xa0/0x1e0 [ 481.672025] [<c88d4c88>] sysenter_past_esp+0x45/0x74 [ 481.672037] ---[ end trace 3fd23759e17e1622 ]--- [ 481.672049] Mapped at: [ 481.672060] [ 481.672072] [<c846062c>] debug_dma_map_page.part.25+0x1c/0xf0 [ 481.672083] [ 481.672095] [<c8460799>] debug_dma_map_page+0x99/0xc0 [ 481.672106] [ 481.672132] [<f93745ec>] ath10k_wmi_alloc_chunk+0x12c/0x1f0 [ath10k_core] [ 481.672142] [ 481.672168] [<f937d0c4>] ath10k_wmi_event_service_ready_work+0x304/0x540 [ath10k_core] [ 481.672178] [ 481.672190] [<c80a3643>] process_one_work+0x1c3/0x670 [ 482.137134] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 482.313144] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313274] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313768] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 482.313777] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1 [ 482.313974] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4159f498 [ 482.369858] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 [ 482.370011] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 483.596770] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 [ 483.701686] ath: EEPROM regdomain: 0x0 [ 483.701706] ath: EEPROM indicates default country code should be used [ 483.701713] ath: doing EEPROM country->regdmn map search [ 483.701721] ath: country maps to regdmn code: 0x3a [ 483.701730] ath: Country alpha2 being used: US [ 483.701737] ath: Regpair used: 0x3a Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-20brcmfmac: fix uninitialized field in scheduled scan ssid configurationArend Van Spriel1-0/+1
The scheduled scan ssid configuration in firmware has a flags field that was not initialized resulting in unexpected behaviour. Fixes: e3bdb7cc0300 ("brcmfmac: fix handling ssids in .sched_scan_start() callback") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-20brcmfmac: fix memory leak in brcmf_cfg80211_attach()Arend Van Spriel1-2/+5
In brcmf_cfg80211_attach() there was one error path not properly handled as it leaked memory allocated in brcmf_btcoex_attach(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-19stmmac: fix memory barriersPavel Machek3-7/+7
Fix up memory barriers in stmmac driver. They are meant to protect against DMA engine, so smp_ variants are certainly wrong, and dma_ variants are preferable. Signed-off-by: Pavel Machek <pavel@denx.de> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-19net: ethernet: cavium: octeon: octeon_mgmt: Handle return NULL error from ↵Arvind Yadav1-0/+6
devm_ioremap Here, If devm_ioremap will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds31-246/+877
Pull networking fixes and cleanups from David Miller: 1) Revert bogus nla_ok() change, from Alexey Dobriyan. 2) Various bpf validator fixes from Daniel Borkmann. 3) Add some necessary SET_NETDEV_DEV() calls to hsis_femac and hip04 drivers, from Dongpo Li. 4) Several ethtool ksettings conversions from Philippe Reynes. 5) Fix bugs in inet port management wrt. soreuseport, from Tom Herbert. 6) XDP support for virtio_net, from John Fastabend. 7) Fix NAT handling within a vrf, from David Ahern. 8) Endianness fixes in dpaa_eth driver, from Claudiu Manoil * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits) net: mv643xx_eth: fix build failure isdn: Constify some function parameters mlxsw: spectrum: Mark split ports as such cgroup: Fix CGROUP_BPF config qed: fix old-style function definition net: ipv6: check route protocol when deleting routes r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected irda: w83977af_ir: cleanup an indent issue net: sfc: use new api ethtool_{get|set}_link_ksettings net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettings net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettings bpf: fix mark_reg_unknown_value for spilled regs on map value marking bpf: fix overflow in prog accounting bpf: dynamically allocate digest scratch buffer gtp: Fix initialization of Flags octet in GTPv1 header gtp: gtp_check_src_ms_ipv4() always return success net/x25: use designated initializers isdn: use designated initializers ...
2016-12-17net: mv643xx_eth: fix build failureSudip Mukherjee1-1/+1
The build of sparc allmodconfig fails with the error: "of_irq_to_resource" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined! of_irq_to_resource() is defined when CONFIG_OF_IRQ is defined. And also CONFIG_OF_IRQ can only be defined if CONFIG_IRQ is defined. So we can safely use #if defined(CONFIG_OF_IRQ) in the code. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17mlxsw: spectrum: Mark split ports as suchIdo Schimmel1-1/+1
When a port is split we should mark it as such, as otherwise the split ports aren't renamed correctly (e.g. sw1p3 -> sw1p3s1) and the unsplit operation fails: $ devlink port split sw1p3 count 4 $ devlink port unsplit eth0 devlink answers: Invalid argument [ 598.565307] mlxsw_spectrum 0000:03:00.0 eth0: Port wasn't split Fixes: 67963a33b4fd ("mlxsw: Make devlink port instances independent of spectrum/switchx2 port instances") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Reviewed-by: Elad Raz <eladr@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17qed: fix old-style function definitionArnd Bergmann1-1/+1
The newly added file causes a harmless warning, with "make W=1": drivers/net/ethernet/qlogic/qed/qed_iscsi.c: In function 'qed_get_iscsi_ops': drivers/net/ethernet/qlogic/qed/qed_iscsi.c:1268:29: warning: old-style function definition [-Wold-style-definition] This makes it a proper prototype. Fixes: fc831825f99e ("qed: Add support for hardware offloaded iSCSI.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detectedManuel Bessler1-5/+5
'ifconfig eth0 down' makes r6040_close() trigger: INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected Fixed by moving calls to phy_stop(), napi_disable(), netif_stop_queue() to outside of the module's private spin_lock_irq block. Found on a Versalogic Tomcat SBC with a Vortex86 SoC s1660e_5150:~# sudo ifconfig eth0 down [ 61.306415] ====================================================== [ 61.306415] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 61.306415] 4.9.0-gb898d2d-manuel #1 Not tainted [ 61.306415] ------------------------------------------------------ [ 61.306415] ifconfig/449 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 61.306415] (&dev->lock){+.+...}, at: [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] and this task is already holding: [ 61.306415] (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] which would create a new lock dependency: [ 61.306415] (&(&lp->lock)->rlock){+.-...} -> (&dev->lock){+.+...} [ 61.306415] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 61.306415] (&(&lp->lock)->rlock){+.-...} [ 61.306415] ... which became SOFTIRQ-irq-safe at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] to a SOFTIRQ-irq-unsafe lock: [ 61.306415] (&dev->lock){+.+...} [ 61.306415] ... which became SOFTIRQ-irq-unsafe at: [ 61.306415] ...[ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] other info that might help us debug this: [ 61.306415] [ 61.306415] Possible interrupt unsafe locking scenario: [ 61.306415] [ 61.306415] CPU0 CPU1 [ 61.306415] ---- ---- [ 61.306415] lock(&dev->lock); [ 61.306415] local_irq_disable(); [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] lock(&dev->lock); [ 61.306415] <Interrupt> [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] [ 61.306415] *** DEADLOCK *** [ 61.306415] [ 61.306415] 2 locks held by ifconfig/449: [ 61.306415] #0: (rtnl_mutex){+.+.+.}, at: [<c13b68ef>] rtnl_lock+0xf/0x20 [ 61.306415] #1: (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] [ 61.306415] [ 61.306415] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 61.306415] -> (&(&lp->lock)->rlock){+.-...} ops: 3049 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb21b>] _raw_spin_lock+0x1b/0x30 [ 61.306415] [ 61.306415] [<d09343cc>] r6040_poll+0x2c/0x330 [r6040] [ 61.306415] [ 61.306415] [<c13a5577>] net_rx_action+0x197/0x340 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c1044037>] run_ksoftirqd+0x17/0x40 [ 61.306415] [ 61.306415] [<c105fe91>] smpboot_thread_fn+0x141/0x180 [ 61.306415] [ 61.306415] [<c105c84e>] kthread+0xde/0x110 [ 61.306415] [ 61.306415] [<c14bb949>] ret_from_fork+0x19/0x30 [ 61.306415] IN-SOFTIRQ-W at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d093474e>] r6040_get_stats+0x1e/0x60 [r6040] [ 61.306415] [ 61.306415] [<c139fb16>] dev_get_stats+0x96/0xc0 [ 61.306415] [ 61.306415] [<c14b416e>] rtnl_fill_stats+0x36/0xfd [ 61.306415] [ 61.306415] [<c13b7b3c>] rtnl_fill_ifinfo+0x47c/0xce0 [ 61.306415] [ 61.306415] [<c13bc08e>] rtmsg_ifinfo_build_skb+0x4e/0xd0 [ 61.306415] [ 61.306415] [<c13bc120>] rtmsg_ifinfo.part.20+0x10/0x40 [ 61.306415] [ 61.306415] [<c13bc16b>] rtmsg_ifinfo+0x1b/0x20 [ 61.306415] [ 61.306415] [<c13a9d19>] register_netdevice+0x409/0x550 [ 61.306415] [ 61.306415] [<c13a9e72>] register_netdev+0x12/0x20 [ 61.306415] [ 61.306415] [<d09357e8>] r6040_init_one+0x3e8/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<d0936280>] __key.45893+0x0/0xfffff739 [r6040] [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] the dependencies between the lock to be acquired[ 61.306415] and SOFTIRQ-irq-unsafe lock: [ 61.306415] -> (&dev->lock){+.+...} ops: 56 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] SOFTIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<c1f28f39>] __key.43998+0x0/0x8 [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] [ 61.306415] stack backtrace: [ 61.306415] CPU: 0 PID: 449 Comm: ifconfig Not tainted 4.9.0-gb898d2d-manuel #1 [ 61.306415] Call Trace: [ 61.306415] dump_stack+0x16/0x19 [ 61.306415] check_usage+0x3f6/0x550 [ 61.306415] ? check_usage+0x4d/0x550 [ 61.306415] check_irq_usage+0x42/0xb0 [ 61.306415] __lock_acquire+0x110c/0x1770 [ 61.306415] lock_acquire+0x7c/0x150 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] ? r6040_close+0x24/0x230 [r6040] [ 61.306415] ? __delay+0x9/0x10 [ 61.306415] phy_stop+0x16/0x80 [ 61.306415] r6040_close+0x89/0x230 [r6040] [ 61.306415] __dev_close_many+0x61/0xa0 [ 61.306415] __dev_close+0x1f/0x30 [ 61.306415] __dev_change_flags+0x87/0x150 [ 61.306415] dev_change_flags+0x23/0x60 [ 61.306415] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] inet_ioctl+0x65/0x90 [ 61.306415] sock_ioctl+0x124/0x2b0 [ 61.306415] ? dlci_ioctl_set+0x30/0x30 [ 61.306415] do_vfs_ioctl+0x7c/0x790 [ 61.306415] ? trace_hardirqs_on+0xb/0x10 [ 61.306415] ? call_rcu_sched+0xd/0x10 [ 61.306415] ? __put_cred+0x32/0x50 [ 61.306415] ? SyS_faccessat+0x178/0x1e0 [ 61.306415] SyS_ioctl+0x28/0x50 [ 61.306415] do_int80_syscall_32+0x3f/0x110 [ 61.306415] entry_INT80_32+0x2f/0x2f [ 61.306415] EIP: 0xb764d364 [ 61.306415] EFLAGS: 00000286 CPU: 0 [ 61.306415] EAX: ffffffda EBX: 00000004 ECX: 00008914 EDX: bfa99d7c [ 61.306415] ESI: bfa99e4c EDI: fffffffe EBP: 00000004 ESP: bfa99d58 [ 61.306415] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 63.836607] r6040 0000:00:08.0 eth0: Link is Down Signed-off-by: Manuel Bessler <manuel.bessler@sensus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17irda: w83977af_ir: cleanup an indent issueDan Carpenter1-3/+3
In commit 99d8d2159d7c ("irda: w83977af_ir: Neaten logging"), we accidentally added an extra tab to these lines. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17net: sfc: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes3-42/+65
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Bert Kenward <bkenward@solarflare.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-28/+37
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-27/+37
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>