summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds23-125/+226
Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...
2019-09-13cdc_ether: fix rndis support for Mediatek based smartphonesBjørn Mork1-1/+9
A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13ixgbevf: Fix secpath usage for IPsec Tx offloadJeff Kirsher1-1/+2
Port the same fix for ixgbe to ixgbevf. The ixgbevf driver currently does IPsec Tx offloading based on an existing secpath. However, the secpath can also come from the Rx side, in this case it is misinterpreted for Tx offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for Tx offload. CC: Shannon Nelson <snelson@pensando.io> Fixes: 7f68d4306701 ("ixgbevf: enable VF IPsec offload operations") Reported-by: Jonathan Tooker <jonathan@reliablehosting.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12ixgbe: Fix secpath usage for IPsec TX offload.Steffen Klassert1-1/+2
The ixgbe driver currently does IPsec TX offloading based on an existing secpath. However, the secpath can also come from the RX side, in this case it is misinterpreted for TX offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for TX offload. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Reported-by: Michael Marley <michael@michaelmarley.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12tun: fix use-after-free when register netdev failedYang Yingliang1-5/+11
I got a UAF repport in tun driver when doing fuzzy test: [ 466.269490] ================================================================== [ 466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0 [ 466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699 [ 466.271810] [ 466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427 [ 466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 466.271838] Call Trace: [ 466.271858] dump_stack+0xca/0x13e [ 466.271871] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271890] print_address_description+0x79/0x440 [ 466.271906] ? vprintk_func+0x5e/0xf0 [ 466.271920] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271935] __kasan_report+0x15c/0x1df [ 466.271958] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271976] kasan_report+0xe/0x20 [ 466.271987] tun_chr_read_iter+0x2ca/0x2d0 [ 466.272013] do_iter_readv_writev+0x4b7/0x740 [ 466.272032] ? default_llseek+0x2d0/0x2d0 [ 466.272072] do_iter_read+0x1c5/0x5e0 [ 466.272110] vfs_readv+0x108/0x180 [ 466.299007] ? compat_rw_copy_check_uvector+0x440/0x440 [ 466.299020] ? fsnotify+0x888/0xd50 [ 466.299040] ? __fsnotify_parent+0xd0/0x350 [ 466.299064] ? fsnotify_first_mark+0x1e0/0x1e0 [ 466.304548] ? vfs_write+0x264/0x510 [ 466.304569] ? ksys_write+0x101/0x210 [ 466.304591] ? do_preadv+0x116/0x1a0 [ 466.304609] do_preadv+0x116/0x1a0 [ 466.309829] do_syscall_64+0xc8/0x600 [ 466.309849] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.309861] RIP: 0033:0x4560f9 [ 466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127 [ 466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9 [ 466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003 [ 466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000 [ 466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10 [ 466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000 [ 466.323057] [ 466.323064] Allocated by task 2605: [ 466.335165] save_stack+0x19/0x80 [ 466.336240] __kasan_kmalloc.constprop.8+0xa0/0xd0 [ 466.337755] kmem_cache_alloc+0xe8/0x320 [ 466.339050] getname_flags+0xca/0x560 [ 466.340229] user_path_at_empty+0x2c/0x50 [ 466.341508] vfs_statx+0xe6/0x190 [ 466.342619] __do_sys_newstat+0x81/0x100 [ 466.343908] do_syscall_64+0xc8/0x600 [ 466.345303] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.347034] [ 466.347517] Freed by task 2605: [ 466.348471] save_stack+0x19/0x80 [ 466.349476] __kasan_slab_free+0x12e/0x180 [ 466.350726] kmem_cache_free+0xc8/0x430 [ 466.351874] putname+0xe2/0x120 [ 466.352921] filename_lookup+0x257/0x3e0 [ 466.354319] vfs_statx+0xe6/0x190 [ 466.355498] __do_sys_newstat+0x81/0x100 [ 466.356889] do_syscall_64+0xc8/0x600 [ 466.358037] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.359567] [ 466.360050] The buggy address belongs to the object at ffff888372139100 [ 466.360050] which belongs to the cache names_cache of size 4096 [ 466.363735] The buggy address is located 336 bytes inside of [ 466.363735] 4096-byte region [ffff888372139100, ffff88837213a100) [ 466.367179] The buggy address belongs to the page: [ 466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0 [ 466.371582] flags: 0x2fffff80010200(slab|head) [ 466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00 [ 466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 466.377778] page dumped because: kasan: bad access detected [ 466.379730] [ 466.380288] Memory state around the buggy address: [ 466.381844] ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.384009] ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.388257] ^ [ 466.390234] ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.392512] ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.394667] ================================================================== tun_chr_read_iter() accessed the memory which freed by free_netdev() called by tun_set_iff(): CPUA CPUB tun_set_iff() alloc_netdev_mqs() tun_attach() tun_chr_read_iter() tun_get() tun_do_read() tun_ring_recv() register_netdevice() <-- inject error goto err_detach tun_detach_all() <-- set RCV_SHUTDOWN free_netdev() <-- called from err_free_dev path netdev_freemem() <-- free the memory without check refcount (In this path, the refcount cannot prevent freeing the memory of dev, and the memory will be used by dev_put() called by tun_chr_read_iter() on CPUB.) (Break from tun_ring_recv(), because RCV_SHUTDOWN is set) tun_put() dev_put() <-- use the memory freed by netdev_freemem() Put the publishing of tfile->tun after register_netdevice(), so tun_get() won't get the tun pointer that freed by err_detach path if register_netdevice() failed. Fixes: eb0fb363f920 ("tuntap: attach queue 0 before registering netdevice") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11ixgbe: fix double clean of Tx descriptors with xdpIlya Maximets1-18/+11
Tx code doesn't clear the descriptors' status after cleaning. So, if the budget is larger than number of used elems in a ring, some descriptors will be accounted twice and xsk_umem_complete_tx will move prod_tail far beyond the prod_head breaking the completion queue ring. Fix that by limiting the number of descriptors to clean by the number of used descriptors in the Tx ring. 'ixgbe_clean_xdp_tx_irq()' function refactored to look more like 'ixgbe_xsk_clean_tx_ring()' since we're allowed to directly use 'next_to_clean' and 'next_to_use' indexes. CC: stable@vger.kernel.org Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11ixgbe: Prevent u8 wrapping of ITR value to something less than 10usAlexander Duyck1-1/+3
There were a couple cases where the ITR value generated via the adaptive ITR scheme could exceed 126. This resulted in the value becoming either 0 or something less than 10. Switching back and forth between a value less than 10 and a value greater than 10 can cause issues as certain hardware features such as RSC to not function well when the ITR value has dropped that low. CC: stable@vger.kernel.org Fixes: b4ded8327fea ("ixgbe: Update adaptive ITR algorithm") Reported-by: Gregg Leventhal <gleventhal@janestreet.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11mlx4: fix spelling mistake "veify" -> "verify"Colin Ian King1-1/+1
There is a spelling mistake in a mlx4_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: fix spelling mistake "undeflow" -> "underflow"Colin Ian King1-1/+1
There is a spelling mistake in a .msg literal string. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: lmc: fix spelling mistake "runnin" -> "running"Colin Ian King1-1/+1
There is a spelling mistake in the lmc_trace message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: sonic: replace dev_kfree_skb in sonic_send_packetMao Wenan1-1/+1
sonic_send_packet will be processed in irq or non-irq context, so it would better use dev_kfree_skb_any instead of dev_kfree_skb. Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11wimax: i2400: fix memory leakNavid Emamdoost1-0/+1
In i2400m_op_rfkill_sw_toggle cmd buffer should be released along with skb response. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10net/ibmvnic: Fix missing { in __ibmvnic_resetMichal Suchanek1-1/+1
Commit 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue") adds a } without corresponding { causing build break. Fixes: 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07nfp: flower: cmsg rtnl locks can timeout reify messagesFred Lotter1-5/+5
Flower control message replies are handled in different locations. The truly high priority replies are handled in the BH (tasklet) context, while the remaining replies are handled in a predefined Linux work queue. The work queue handler orders replies into high and low priority groups, and always start servicing the high priority replies within the received batch first. Reply Type: Rtnl Lock: Handler: CMSG_TYPE_PORT_MOD no BH tasklet (mtu) CMSG_TYPE_TUN_NEIGH no BH tasklet CMSG_TYPE_FLOW_STATS no BH tasklet CMSG_TYPE_PORT_REIFY no WQ high CMSG_TYPE_PORT_MOD yes WQ high (link/mtu) CMSG_TYPE_MERGE_HINT yes WQ low CMSG_TYPE_NO_NEIGH no WQ low CMSG_TYPE_ACTIVE_TUNS no WQ low CMSG_TYPE_QOS_STATS no WQ low CMSG_TYPE_LAG_CONFIG no WQ low A subset of control messages can block waiting for an rtnl lock (from both work queue priority groups). The rtnl lock is heavily contended for by external processes such as systemd-udevd, systemd-network and libvirtd, especially during netdev creation, such as when flower VFs and representors are instantiated. Kernel netlink instrumentation shows that external processes (such as systemd-udevd) often use successive rtnl_trylock() sequences, which can result in an rtnl_lock() blocked control message to starve for longer periods of time during rtnl lock contention, i.e. netdev creation. In the current design a single blocked control message will block the entire work queue (both priorities), and introduce a latency which is nondeterministic and dependent on system wide rtnl lock usage. In some extreme cases, one blocked control message at exactly the wrong time, just before the maximum number of VFs are instantiated, can block the work queue for long enough to prevent VF representor REIFY replies from getting handled in time for the 40ms timeout. The firmware will deliver the total maximum number of REIFY message replies in around 300us. Only REIFY and MTU update messages require replies within a timeout period (of 40ms). The MTU-only updates are already done directly in the BH (tasklet) handler. Move the REIFY handler down into the BH (tasklet) in order to resolve timeouts caused by a blocked work queue waiting on rtnl locks. Signed-off-by: Fred Lotter <frederik.lotter@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/ibmvnic: free reset work of removed device from queueJuliet Kim1-2/+5
Commit 36f1031c51a2 ("ibmvnic: Do not process reset during or after device removal") made the change to exit reset if the driver has been removed, but does not free reset work items of the adapter from queue. Ensure all reset work items are freed when breaking out of the loop early. Fixes: 36f1031c51a2 ("ibmnvic: Do not process reset during or after device removal”) Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net: phylink: Fix flow control resolutionStefan Chulski1-3/+3
Regarding to IEEE 802.3-2015 standard section 2 28B.3 Priority resolution - Table 28-3 - Pause resolution In case of Local device Pause=1 AsymDir=0, Link partner Pause=1 AsymDir=1, Local device resolution should be enable PAUSE transmit, disable PAUSE receive. And in case of Local device Pause=1 AsymDir=1, Link partner Pause=1 AsymDir=0, Local device resolution should be enable PAUSE receive, disable PAUSE transmit. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reported-by: Shaul Ben-Mayor <shaulb@marvell.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/hamradio/6pack: Fix the size of a sk_buff used in 'sp_bump()'Christophe JAILLET1-2/+2
We 'allocate' 'count' bytes here. In fact, 'dev_alloc_skb' already add some extra space for padding, so a bit more is allocated. However, we use 1 byte for the KISS command, then copy 'count' bytes, so count+1 bytes. Explicitly allocate and use 1 more byte to be safe. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06Merge tag 'wireless-drivers-for-davem-2019-09-05' of ↵David S. Miller7-34/+60
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Fourth set of fixes for 5.3, and hopefully really the last one. Quite a few CVE fixes this time but at least to my knowledge none of them have a known exploit. mt76 * workaround firmware hang by disabling hardware encryption on MT7630E * disable 5GHz band for MT7630E as it's not working properly mwifiex * fix IE parsing to avoid a heap buffer overflow iwlwifi * fix for QuZ device initialisation rt2x00 * another fix for rekeying * revert a commit causing degradation in rx signal levels rsi * fix a double free ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06forcedeth: use per cpu to collect xmit/recv statisticsZhu Yanjun1-44/+99
When testing with a background iperf pushing 1Gbit/sec traffic and running both ifconfig and netstat to collect statistics, some deadlocks occurred. Ifconfig and netstat will call nv_get_stats64 to get software xmit/recv statistics. In the commit f5d827aece36 ("forcedeth: implement ndo_get_stats64() API"), the normal tx/rx variables is to collect tx/rx statistics. The fix is to replace normal tx/rx variables with per cpu 64-bit variable to collect xmit/recv statistics. The per cpu variable will avoid deadlocks and provide fast efficient statistics updates. In nv_probe, the per cpu variable is initialized. In nv_remove, this per cpu variable is freed. In xmit/recv process, this per cpu variable will be updated. In nv_get_stats64, this per cpu variable on each cpu is added up. Then the driver can get xmit/recv packets statistics. A test runs for several days with this commit, the deadlocks disappear and the performance is better. Tested: - iperf SMP x86_64 -> Client connecting to 1.1.1.108, TCP port 5001 TCP window size: 85.0 KByte (default) ------------------------------------------------------------ [ 3] local 1.1.1.105 port 38888 connected with 1.1.1.108 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.10 GBytes 943 Mbits/sec ifconfig results: enp0s9 Link encap:Ethernet HWaddr 00:21:28:6f:de:0f inet addr:1.1.1.105 Bcast:0.0.0.0 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5774764531 errors:0 dropped:0 overruns:0 frame:0 TX packets:633534193 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7646159340904 (7.6 TB) TX bytes:11425340407722 (11.4 TB) netstat results: Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg ... enp0s9 1500 0 5774764531 0 0 0 633534193 0 0 0 BMRU ... Fixes: f5d827aece36 ("forcedeth: implement ndo_get_stats64() API") CC: Joe Jin <joe.jin@oracle.com> CC: JUNXIAO_BI <junxiao.bi@oracle.com> Reported-and-tested-by: Nan san <nan.1986san@gmail.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: sonic: return NETDEV_TX_OK if failed to map bufferMao Wenan1-2/+2
NETDEV_TX_BUSY really should only be used by drivers that call netif_tx_stop_queue() at the wrong moment. If dma_map_single() is failed to map tx DMA buffer, it might trigger an infinite loop. This patch use NETDEV_TX_OK instead of NETDEV_TX_BUSY, and change printk to pr_err_ratelimited. Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-04virtio-net: lower min ring num_free for efficiency? jiang1-1/+1
This change lowers ring buffer reclaim threshold from 1/2*queue to budget for better performance. According to our test with qemu + dpdk, packet dropping happens when the guest is not able to provide free buffer in avail ring timely with default 1/2*queue. The value in the patch has been tested and does show better performance. Test setup: iperf3 to generate packets to guest (total 30mins, pps 400k, UDP) avg packets drop before: 2842 avg packets drop after: 360(-87.3%) Further, current code suffers from a starvation problem: the amount of work done by try_fill_recv is not bounded by the budget parameter, thus (with large queues) once in a while userspace gets blocked for a long time while queue is being refilled. Trigger refills earlier to make sure the amount of work to do is limited. Signed-off-by: jiangkidd <jiangkidd@hotmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-03rsi: fix a double free bug in rsi_91x_deinit()Hui Peng1-1/+0
`dev` (struct rsi_91x_usbdev *) field of adapter (struct rsi_91x_usbdev *) is allocated and initialized in `rsi_init_usb_interface`. If any error is detected in information read from the device side, `rsi_init_usb_interface` will be freed. However, in the higher level error handling code in `rsi_probe`, if error is detected, `rsi_91x_deinit` is called again, in which `dev` will be freed again, resulting double free. This patch fixes the double free by removing the free operation on `dev` in `rsi_init_usb_interface`, because `rsi_91x_deinit` is also used in `rsi_disconnect`, in that code path, the `dev` field is not (and thus needs to be) freed. This bug was found in v4.19, but is also present in the latest version of kernel. Fixes CVE-2019-15504. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"Stanislaw Gruszka1-12/+6
This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Cc: <stable@vger.kernel.org> # v5.1+ Reported-and-tested-by: Sergey Maranchuk <slav0nic0@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rt2x00: clear up IV's on key removalStanislaw Gruszka1-7/+12
After looking at code I realized that my previous fix 95844124385e ("rt2x00: clear IV's on start to fix AP mode regression") was incomplete. We can still have wrong IV's after re-keyring. To fix that, clear up IV's also on key removal. Fixes: 710e6cc1595e ("rt2800: do not nullify initialization vector data") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> tested-by: Emil Karlson <jekarl@iki.fi> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03iwlwifi: assign directly to iwl_trans->cfg in QuZ detectionLuca Coelho1-12/+12
We were erroneously assigning the new configuration to a local variable cfg, but that was not being assigned to anything, so the change was getting lost. Assign directly to iwl_trans->cfg instead. Fixes: 5a8c31aa6357 ("iwlwifi: pcie: fix recognition of QuZ devices") Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settingsWen Huang2-1/+11
mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and mwifiex_set_wmm_params() call memcpy() without checking the destination size.Since the source is given from user-space, this may trigger a heap buffer overflow. Fix them by putting the length check before performing memcpy(). This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816. Signed-off-by: Wen Huang <huangwenabc@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.comg> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03mt76: mt76x0e: disable 5GHz band for MT7630EStanislaw Gruszka1-0/+5
MT7630E hardware does support 5GHz, but we do not properly configure phy for 5GHz channels. Scanning at this band not only do not show any APs but also can hang the firmware. Since vendor reference driver do not support 5GHz we don't know how properly configure 5GHz channels. So disable this band for MT7630E . Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03mt76: mt76x0e: don't use hw encryption for MT7630EStanislaw Gruszka1-1/+14
Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") I can observe firmware hangs on MT7630E on station mode: tx stop functioning after minor activity (rx keep working) and on module unload device fail to stop with messages: [ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop [ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop Loading module again results in failure to associate with AP. Only machine power off / power on cycle can make device work again. It's unclear why commit 41634aa8d6db causes the problem, but it is related to HW encryption. Since issue is a firmware hang, that is super hard to debug, just disable HW encryption as fix for the issue. Fixes: 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-02net: stmmac: dwmac-sun8i: Variable "val" in function ↵Yizhuo1-1/+6
sun8i_dwmac_set_syscon() could be uninitialized In function sun8i_dwmac_set_syscon(), local variable "val" could be uninitialized if function regmap_field_read() returns -EINVAL. However, it will be used directly in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: seeq: Fix the function used to release some memory in an error handling ↵Christophe JAILLET1-3/+4
path In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove ↵Christophe JAILLET1-1/+4
functions Call to 'pci_free_irq_vectors()' are missing both in the error handling path of the probe function, and in the remove function. Add them. Fixes: 19971f5ea0ab ("enetc: add PTP clock driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: bcmgenet: use ethtool_op_get_ts_info()Ryan M. Collins1-0/+1
This change enables the use of SW timestamping on the Raspberry Pi 4. bcmgenet's transmit function bcmgenet_xmit() implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the SOF_TIMESTAMPING_TX_SOFTWARE capability is announced. Similar to commit a8f5cb9e7991 ("smsc95xx: use ethtool_op_get_ts_info()") Signed-off-by: Ryan M. Collins <rmc032@bucknell.edu> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: dsa: microchip: add KSZ8563 compatibility stringRazvan Stefanescu1-0/+1
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix out of memory condition on rx sideDmitry Bogdanov1-1/+2
On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: linkstate irq should be oneshotIgor Russkikh1-1/+1
Declaring threaded irq handler should also indicate the irq is oneshot. It is oneshot indeed, because HW implements irq automasking on trigger. Not declaring this causes some kernel configurations to fail on interface up, because request_threaded_irq returned an err code. The issue was originally hidden on normal x86_64 configuration with latest kernel, because depending on interrupt controller, irq driver added ONESHOT flag on its own. Issue was observed on older kernels (4.14) where no such logic exists. Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: reapply vlan filters on upDmitry Bogdanov1-0/+4
In case of device reconfiguration the driver may reset the device invisible for other modules, vlan module in particular. So vlans will not be removed&created and vlan filters will not be configured in the device. The patch reapplies the vlan filters at device start. Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix limit of vlan filtersDmitry Bogdanov1-1/+1
Fix a limit condition of vlans on the interface before setting vlan promiscuous mode Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix removal of vlan 0Dmitry Bogdanov1-1/+2
Due to absence of checking against the rx flow rule when vlan 0 is being removed, the other rule could be removed instead of the rule with vlan 0 Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: dsa: microchip: fill regmap_config nameGeorge McCollister1-0/+1
Use the register value width as the regmap_config name to prevent the following error when the second and third regmap_configs are initialized. "debugfs: Directory '${bus-id}' with parent 'regmap' already present!" Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-4/+13
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-31 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix 32-bit zero-extension during constant blinding which has been causing a regression on ppc64, from Naveen. 2) Fix a latency bug in nfp driver when updating stack index register, from Jiong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: stmmac: dwmac-rk: Don't fail if phy regulator is absentChen-Yu Tsai1-4/+2
The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30amd-xgbe: Fix error path in xgbe_mod_init()YueHaibing1-2/+8
In xgbe_mod_init(), we should do cleanup if some error occurs Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming") Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29iwlwifi: pcie: handle switching killer Qu B0 NICs to C0Luca Coelho4-6/+31
We need to use a different firmware for C0 versions of killer Qu NICs. Add structures for them and handle them in the if block that detects C0 revisions. Additionally, instead of having an inclusive check for QnJ devices, make the selection exclusive, so that switching to QnJ is the exception, not the default. This prevents us from having to add all the non-QnJ cards to an exclusion list. To do so, only go into the QnJ block if the device has an RF ID type HR and HW revision QnJ. Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-28sky2: Disable MSI on yet another ASUS boards (P6Xxxx)Takashi Iwai1-0/+7
A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by: SteveM <swm@swm1.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28nfp: flower: handle neighbour events on internal portsJohn Hurley1-4/+4
Recent code changes to NFP allowed the offload of neighbour entries to FW when the next hop device was an internal port. This allows for offload of tunnel encap when the end-point IP address is applied to such a port. Unfortunately, the neighbour event handler still rejects events that are not associated with a repr dev and so the firmware neighbour table may get out of sync for internal ports. Fix this by allowing internal port neighbour events to be correctly processed. Fixes: 45756dfedab5 ("nfp: flower: allow tunnels to output to internal port") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28nfp: flower: prevent ingress block binds on internal portsJohn Hurley1-3/+4
Internal port TC offload is implemented through user-space applications (such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect block offload support in the NFP driver accepts both ingress qdisc binds and egress binds if the device is an internal port. However, clsact sends bind notification for both ingress and egress block binds which can lead to the driver registering multiple callbacks and receiving multiple notifications of new filters. Fix this by rejecting ingress block bind callbacks when the port is internal and only adding filter callbacks for egress binds. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28r8152: remove calling netif_napi_delHayes Wang1-2/+0
Remove unnecessary use of netif_napi_del. This also avoids to call napi_disable() after netif_napi_del(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Revert "r8152: napi hangup fix after disconnect"Hayes Wang1-2/+1
This reverts commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5. The commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect") adds a check about RTL8152_UNPLUG to determine if calling napi_disable() is invalid in rtl8152_close(), when rtl8152_disconnect() is called. This avoids to use napi_disable() after calling netif_napi_del(). Howver, commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real disconnection") causes that RTL8152_UNPLUG is not always set when calling rtl8152_disconnect(). Therefore, I have to revert commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect"), first. And submit another patch to fix it. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28ibmvnic: Do not process reset during or after device removalThomas Falcon1-1/+5
Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28macb: Update compatibility string for SiFive FU540-C000Yash Shah1-1/+1
Update the compatibility string for SiFive FU540-C000 as per the new string updated in the binding doc. Reference: https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/ Signed-off-by: Yash Shah <yash.shah@sifive.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-13 04:18:48 +0000