summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2007-09-20sky2: reorganize chip revision featuresStephen Hemminger2-57/+90
This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20sky2: ethtool speed report bugStephen Hemminger1-7/+0
On 100mbit versions, the driver always reports gigabit speed available. The correct modes are already computed, then overwritten. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20sky2: fix VLAN receive processing (resend)Stephen Hemminger2-2/+14
The length check for truncated frames was not correctly handling the case where VLAN acceleration had already read the tag. Also, the Yukon EX has some features that use high bit of status as security tag. Signed-off-by: Pierre-Yves Ritschard <pyr@spootnik.org> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20phy: export phy_mii_ioctlDomen Puncer1-0/+1
Export phy_mii_ioctl, so network drivers can use it when built as modules too. Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-19myri10ge: Add support for PCI device id 9Brice Goglin1-0/+3
Add support for new Myri-10G boards with PCI device id 9. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-16Merge branch 'master' of ↵Linus Torvalds2-78/+50
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [VLAN]: Fix net_device leak. [PPP] generic: Fix receive path data clobbering & non-linear handling [PPP] generic: Call skb_cow_head before scribbling over skb [NET] skbuff: Add skb_cow_head [BRIDGE]: Kill clone argument to br_flood_* [PPP] pppoe: Fill in header directly in __pppoe_xmit [PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value [PPP] pppoe: Fix skb_unshare_check call position [SCTP]: Convert bind_addr_list locking to RCU [SCTP]: Add RCU synchronization around sctp_localaddr_list [PKT_SCHED]: sch_cbq.c: Shut up uninitialized variable warning [PKTGEN]: srcmac fix [IPV6]: Fix source address selection. [IPV4]: Just increment OutDatagrams once per a datagram. [IPV6]: Just increment OutDatagrams once per a datagram. [IPV6]: Fix unbalanced socket reference with MSG_CONFIRM. [NET_SCHED] protect action config/dump from irqs [NET]: Fix two issues wrt. SO_BINDTODEVICE.
2007-09-16[PPP] generic: Fix receive path data clobbering & non-linear handlingHerbert Xu1-19/+25
This patch adds missing pskb_may_pull calls to deal with non-linear packets that may arrive from pppoe or pppol2tp. It also copies cloned packets before writing over them. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16[PPP] generic: Call skb_cow_head before scribbling over skbHerbert Xu1-11/+3
It's rude to write over data that other people are still using. So call skb_cow_head before PPP proceeds to modify the skb data. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16[NET] skbuff: Add skb_cow_headHerbert Xu1-1/+1
This patch adds an optimised version of skb_cow that avoids the copy if the header can be modified even if the rest of the payload is cloned. This can be used in encapsulating paths where we only need to modify the header. As it is, this can be used in PPPOE and bridging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16[PPP] pppoe: Fill in header directly in __pppoe_xmitHerbert Xu1-11/+9
This patch removes the hdr variable (which is copied into the skb) and instead sets the header directly in the skb. It also uses __skb_push instead of skb_push since we've just checked using skb_cow for enough head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16[PPP] pppoe: Fix data clobbering in __pppoe_xmit and return valueHerbert Xu1-37/+13
The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16[PPP] pppoe: Fix skb_unshare_check call positionHerbert Xu1-3/+3
The skb_unshare_check call needs to be made before pskb_may_pull, not after. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-15drivers/net/pcmcia/3c589_cs: fix port configuration switcherooJeff Garzik1-1/+1
10base2 and 10baseT were accidentally switched. Noticed by Andreas HÃŒbner, forwarded by Alan Cox. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-15sk98lin: resurrect driverStephen Hemminger42-1/+41398
This reverts commit e1abecc48938fbe1966ea6e78267fc673fa59295. The driver works on some hardware that skge doesn't handle yet. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-15ucc_geth: fix compilationAnton Vorontsov1-1/+1
Currently qe_bd_t is used in the macro call -- dma_unmap_single, which is a no-op on PPC32, thus error is hidden today. Starting with 2.6.24, macro will be replaced by the empty static function, and erroneous use of qe_bd_t will trigger compilation error. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-15mv643xx_eth: Fix tx_bytes stats calculationDale Farnsworth1-1/+1
Reported by Corey Minyard <cminyard@mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-15Merge branch 'fixes-jgarzik' of ↵Jeff Garzik3-10/+22
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-09-14[PATCH] bcm43xx: Fix cancellation of work queue crashesLarry Finger3-10/+22
A crash upon booting that is caused by bcm43xx has been reported [1] and found to be due to a work queue being reinitialized while work on that queue is still pending. This fix modifies the shutdown of work queues and prevents periodic work from being requeued during shutdown. With this patch, no more crashes on reboot were observed by the original reporter. I do not get that particular failure on my system; however, when running a large number of ifdown/ifup sequences, my system would kernel panic with the 'caps lock' light blinking at roughly a 1 Hz rate. In addition, there were infrequent failures in the firmware that resulted in 'IRQ READY TIMEOUT' errors. With this patch, no more of the first type of failure occur, and incidence of the second type is greatly reduced. [1] http://bugzilla.kernel.org/show_bug.cgi?id=8937 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-13spidernet: fix interrupt reason recognitionIshizaki Kou1-8/+4
This patch solves a problem that the spidernet driver sometimes fails to handle IRQ. The problem happens because, - In Cell architecture, interrupts may arrive at an interrupt controller, even if they are masked by the setting on registers of devices. It happens when interrupt packets are sent just before the interrupts are masked. - spidernet interrupt handler compares interrupt reasons with interrupt masks, so when such interrupts occurs, spidernet interrupt handler returns IRQ_NONE. - When all of interrupt handler return IRQ_NONE, linux kernel disables the IRQ and it no longer delivers interrupts to the interrupt handlers. spidernet doesn't work after above sequence, because it can't receive interrupts. This patch changes spidernet interrupt handler that it compares interrupt reason with SPIDER_NET_INTX_MASK_VALUE. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-13ehea: fix last_rx updateJan-Bernd Themann1-1/+1
Update last_rx in registered device struct instead of in the dummy device. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-13ehea: propagate physical port stateJan-Bernd Themann2-2/+17
Introduces a module parameter to decide whether the physical port link state is propagated to the network stack or not. It makes sense not to take the physical port state into account on machines with more logical partitions that communicate with each other. This is always possible no matter what the physical port state is. Thus eHEA can be considered as a switch there. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-13Fix a lock problem in generic phy codeHans-Jürgen Koch2-4/+4
Lock debugging finds a problem in phy.c and phy_device.c, this patch fixes it. Tested on an AT91SAM9263-EK board, kernel 2.6.23-rc4. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-13sky2: restore multicast list on resume and other opsStephen Hemminger1-1/+8
Need to restore multicast settings on resume and after 'ethtool -r'. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-12atl1: disable broken 64-bit DMALuca Tettamanti1-12/+7
64-bit DMA causes data corruption with atl1. We don't know why, and Atheros is working on it. For now, just use 32-bit DMA. This is a big hack that is probably wrong, but it stops the bleeding. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Chris Snook <csnook@redhat.com> Acked-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-11[TG3]: Workaround MSI bug on 5714/5780.Michael Chan1-2/+11
A hardware bug was revealed after a recent PCI MSI patch was made to always disable legacy INTX when enabling MSI. The 5714/5780 chips will not generate MSI when INTX is disabled, causing MSI failure messages to be reported, and another patch was made to workaround the problem by disabling MSI on ServerWorks HT1000 bridge chips commonly found with the 5714. We workaround this chip bug by enabling INTX after we enable MSI and after we resume from suspend. Update version to 3.81. This problem was discovered by David Miller. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-31Merge branch 'upstream-linus' of ↵Linus Torvalds13-159/+302
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: - cxgb3 engine microcode load cxgb3 - Fix dev->priv usage qeth: Drop ARP packages on HiperSockets interface with NOARP attribute. qeth: provide specific message for OSA-adapters exclusively used qeth: crash during reboot after failing online setting qeth: Announce tx checksumming for qeth devices in TSO/EDDP mode qeth: dont return the return values of void functions. qeth: enforce a rate limit for inbound scatter gather messages qeth: ungrouping a device must not be interruptible netxen: fix crashes during module unload netxen: Avoid firmware load in PCI probe PS3: fix the bug that 'ifconfig down' would hang IOC3: Program UART predividers.
2007-08-31- cxgb3 engine microcode loadDivy Le Ray3-52/+123
Load the engine microcode when an interface is brought up, instead of of doing it when the module is loaded. Loosen up tight binding between the driver and the engine microcode version. There is no need for microcode update with T3A boards. Fix the file naming. Do a better job at logging the loading activity. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31cxgb3 - Fix dev->priv usageDivy Le Ray6-68/+104
cxgb3 used netdev_priv() and dev->priv for different purposes. In 2.6.23, netdev_priv() == dev->priv, cxgb3 needs a fix. This patch is a partial backport of Dave Miller's changes in the net-2.6.24 git branch. Without this fix, cxgb3 crashes on 2.6.23. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31netxen: fix crashes during module unloaddhananjay@netxen.com3-14/+15
This patch fixes two problems during driver unload. The pci_disable_device() call is before firmware reload, causing reads and writes across PCI bus after disabling device. Second problem is the register window was wrong during firmware reload Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31netxen: Avoid firmware load in PCI probedhananjay@netxen.com1-4/+0
Loading firmware during PCI probe can lead to incorrect initialization, rendering the card unusable until next reboot. This was introduced a while ago as a workaround for firmware bug, a better workaround was submitted for this a while ago. So removing original hack that loads firmware during probe. Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31PS3: fix the bug that 'ifconfig down' would hangMasakazu Mokuno1-1/+0
Fix the bug that 'ifconfig eth0 down' would hang up, reported by Stefan Assmann <sassmann@suse.de>. As we removed netif_poll_enable() from dev->open(), we should not use netif_poll_disable() in dev->stop(). Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31IOC3: Program UART predividers.Ralf Baechle1-20/+60
The IOC3 driver's UART detection bits used to rely on the the firmware setting the UART pre-divider in a way that's apropriate for the 8250 driver which doesn't currently program this register. This happens to work for the console but not rarely for additional ports. While at it, also program the UART to RS-232 PIO mode; it the UART might have been in mac-serial and/or DMA mode though that hasn't actually been observed in practice. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-28[BNX2]: Add write posting comment.Michael Chan1-0/+4
Add comment to explain why we cannot read back after chip reset before delaying. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28[BNX2]: Use msleep().Arjan van de Ven1-4/+2
bnx2.c (incorrectly) sets current->state directly to TASK_UNINTERRUPTIBLE, without going through set_task_state(). However all the code wants to do is an msleep so just make it do that instead... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[NET]: Avoid pointless allocation casts in BSD compression moduleJesper Juhl1-4/+2
The general kernel memory allocation functions return void pointers and there is no need to cast their return values. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[IRDA]: Do not do pointless kmalloc return value cast in KingSun driverJesper Juhl1-2/+2
kmalloc() returns a void pointer, so there is no need to cast it in drivers/net/irda/kingsun-sir.c::kingsun_probe(). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[SLIP]: trivial sparse warning fixStephen Hemminger1-1/+1
Function declared static in forward declaration, but not in actual code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26[EQL]: sparse warning fixStephen Hemminger1-1/+1
More noodlin on long flights, patch bin. Sparse warning fix for eql. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-25myri10ge: update driver version to 1.3.2-1.269Brice Goglin1-1/+1
Update myri10ge driver version to 1.3.2-1.269. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25myri10ge: use pcie_get/set_readrqBrice Goglin1-26/+6
Based on a patch from Peter Oruba, convert myri10ge to use pcie_get_readrq() and pcie_set_readrq() instead of our own PCI calls and arithmetics. These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix queue destructorJan-Bernd Themann1-0/+6
Includes hcp_epas_dtor in eq/cq/qp destructors to unmap HW register. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix module parameter descriptionJan-Bernd Themann1-1/+1
Update the module parameter description of "use_mcs" to show correct default value Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix interface to DLPAR toolsJan-Bernd Themann1-3/+3
Userspace DLPAR tool expects decimal numbers to be written to and read from sysfs entries. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sgiseeq: Fix return type of sgiseeq_removeRalf Baechle1-1/+3
The driver remove method needs to return an int not void. This was just never noticed because usually this driver is not being built as a module. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2 1.17Stephen Hemminger1-1/+1
Mark new version to track if current driver is in use. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: only bring up watchdog if link is activeStephen Hemminger2-31/+27
This fixes the extra timer overhead that people were whining about as a 2.6.23 regression. Running the watchdog timer all the time is unneeded. Change it to run only if link is up, and reduce frequency to save power. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: clear PCI power control reg at startupStephen Hemminger1-1/+6
Make sure PCI register for PHY power gets cleared on boot, and make sure to avoid any PCI posting problems. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25DM9000: fix interface hang under loadFlorian Westphal1-18/+7
When transferring data at full speed, the DM9000 network interface sometimes stops sending/receiving data. Worse, ksoftirqd consumes 100% cpu and the net tx watchdog never triggers. Fix by spin_lock_irqsave() in dm9000_start_xmit() to prevent the interrupt handler from interfering. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25phy layer: fix genphy_setup_forced (don't reset)Domen Puncer1-1/+1
Writing BMCR_RESET bit will reset MII_BMCR to default values. This is clearly not what we want. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25Don't use GFP_DMA for zone allocation.Ralf Baechle1-1/+1
IP32 doesn't even have a ZONE_DMA so no point in using GFP_DMA in any IP32-specific device driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 06:24:38 +0000