summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-08-18amd-xgbe: Optimize DMA channel interrupt enablementLendacky, Thomas2-44/+37
Currently whenever the driver needs to enable or disable interrupts for a DMA channel it reads the interrupt enable register (IER), updates the value and then writes the new value back to the IER. Since the hardware does not change the IER, software can track this value and elimiate the need to read it each time. Add the IER value to the channel related data structure and use that as the base for enabling and disabling interrupts, thus removing the need for the MMIO read. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add additional dynamic debug messagesLendacky, Thomas1-0/+4
Add some additional dynamic debug message to the driver. The new messages will provide additional information about the PCS window calculation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add support to handle device renamingLendacky, Thomas4-46/+100
Many of the names used by the driver are based upon the name of the device found during device probe. Move the formatting of the names into the device open function so that any renaming that occurs before the device is brought up will be accounted for. This also means moving the creation of some named workqueues into the device open path. Add support to register for net events so that if a device is renamed the corresponding debugfs directory can be renamed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Update TSO packet statistics accuracyLendacky, Thomas1-1/+1
When transmitting a TSO packet, the driver only increments the TSO packet statistic by one rather than the number of total packets that were sent. Update the driver to record the total number of packets that resulted from TSO transmit. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Be sure driver shuts down cleanly on module removalLendacky, Thomas2-4/+2
Sometimes when the driver is being unloaded while the devices are still up the driver can issue errors. This is based on timing and the double invocation of some routines. The phy_exit() call needs to be run after the network device has been closed and unregistered from the system. Also, the phy_exit() does not need to invoke phy_stop() since that will be called as part of the device closing, so remove that call. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Set the MII control width for the MAC interfaceLendacky, Thomas2-0/+3
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition control register must set the MII control width for the MAC interface to be 8-bits wide. By default the width is 4-bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Set the MDIO mode for 10000Base-T configurationLendacky, Thomas1-1/+1
Currently the MDIO mode is set to none for the 10000Base-T, which is incorrect. The MDIO mode should for this configuration should be clause 45. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18mlx5: ensure 0 is returned when vport is zeroColin Ian King1-1/+1
Currently, if vport is zero then then an uninialized return status in err is returned. Since the only return status at the end of the function esw_add_uc_addr is zero for the current set of return paths we may as well just return 0 rather than err to fix this issue. Detected by CoverityScan, CID#1452698 ("Uninitialized scalar variable") Fixes: eeb66cdb6826 ("net/mlx5: Separate between E-Switch and MPFS") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18ixgbe: change ndo_xdp_xmit return code on xmit errorsJesper Dangaard Brouer1-1/+1
Use errno -ENOSPC ("No space left on device") when the XDP xmit have no space left on the TX ring buffer, instead of -ENOMEM. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PFRick Farrington2-10/+0
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18macvlan: add offload features for encapsulationDimitris Michailidis1-1/+2
Currently macvlan devices do not set their hw_enc_features making encapsulated Tx packets resort to SW fallbacks. Add encapsulation GSO offloads to ->features as is done for the other GSOs and set ->hw_enc_features. Signed-off-by: Dimitris Michailidis <dmichail@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: fix Smatch errorIntiyaz Basha1-2/+2
Fix Smatch error by not dereferencing iq pointer if it's NULL. See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2 Also, remove unnecessary parentheses. Fixes: d314ac222829 ("liquidio: moved liquidio_napi_poll to lio_core.c") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the static check warning due to missing unsupp L3 proto checkSalil1-4/+10
This patch fixes the static check warning due to missing handling leg of unsupported L3 protocol type in the hns3_get_l4_protocol() function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the static checker error warning in hns3_get_link_ksettings()Salil1-37/+48
This patch fixes the static check error warning in hns3_get_link_ksettings() function by re-arranging the code. Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 Driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: hns3: Fixes the missing u64_stats_fetch_begin_irq in 64-bit stats fetchSalil1-0/+2
This patch fixes the missing u64_stats_fetch_begin_irq() while trying to atomically do 64-bit RX/TX fetch. We did not get any error during test as our SoC is 64-bit so all of these seq/lock operations results in NOOP. As such, this seq lock supports has been added for the sake of completion if this code ever runs on 32-bit platform and we are trying to do 64-bit stats fetch. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net/sched: Fix the logic error to decide the ingress qdiscChris Mi6-6/+6
The offending commit used a newly added helper function. But the logic is wrong. Without this fix, the affected NICs can't do HW offload. Error -EOPNOTSUPP will be returned directly. Fixes: a2e8da9378cc ("net/sched: use newly added classid identity helpers") Signed-off-by: Chris Mi <chrism@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: with embedded f/w, issue droq credits before enablementRick Farrington1-8/+12
1. Issue credits BEFORE enabling DROQ's; this prevents PKTPF_ERR interrupt. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: with embedded f/w, don't reload f/w, issue pf flr at exitRick Farrington1-24/+46
1. Add support for PF FLR when exiting (enables CORE_DRV_ACTIVE upon next driver init) 2. Skip some initialization (don't try to load f/w, activate consoles). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17net: ibm: ibmvnic: constify vio_device_idArvind Yadav1-1/+1
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17net: ibm: ibmveth: constify vio_device_idArvind Yadav1-1/+1
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17net: hns3: ensure media_type is unitializedColin Ian King1-1/+1
Media type is only set if h->ae_algo->ops->get_media_type is called so there is a possibility that media_type is uninitialized when it is used a switch statement. Fix this by initializing media_type to HNAE3_MEDIA_TYPE_UNKNOWN. Detected by CoverityScan, CID#1452624("Uninitialized scalar variable") Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17liquidio: fix spelling mistake: "interuupt" -> "interrupt"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16vmbus: remove unused vmbus_sendpacket_ctlstephen hemminger1-5/+4
The only usage of vmbus_sendpacket_ctl was by vmbus_sendpacket. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16vmbus: remove unused vmubs_sendpacket_pagebuffer_ctlstephen hemminger1-6/+4
The function vmbus_sendpacket_pagebuffer_ctl was never used directly. Just have vmbus_send_pagebuffer Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16tun: make tun_build_skb() thread safeEric Dumazet1-6/+1
tun_build_skb() is not thread safe since it uses per queue page frag, this will break things when multiple threads are sending through same queue. Switch to use per-thread generator (no lock involved). Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet") Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16net/mlx4: fix spelling mistake: "availible" -> "available"Colin Ian King3-16/+16
Trivial fix to spelling mistakes in the mlx4 driver Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16nfp: process MTU updates from firmware flower appSimon Horman1-2/+9
Now that control message processing occurs in a workqueue rather than a BH handler MTU updates received from the firmware may be safely processed. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16nfp: process control messages in workqueue in flower appSimon Horman4-3/+41
Processing of control messages is not time-critical and future processing of some messages will require taking the RTNL which is not possible in a BH handler. It seems simplest to move all control message processing to a workqueue. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16net: 3c509: constify pnp_device_idArvind Yadav1-1/+1
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16liquidio: update VF's netdev->max_mtu if there's a change in PF's MTUVeerasenareddy Burru2-6/+6
A VF's MTU is capped at the parent PF's MTU. So if there's a change in the PF's MTU, then update the VF's netdev->max_mtu. Also remove duplicate log messages for MTU change. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16mlx4: sizeof style usagestephen hemminger15-56/+56
The kernel coding style is to treat sizeof as a function (ie. with parenthesis) not as an operator. Also use kcalloc and kmalloc_array Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16skge: add paren around sizeof argstephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16virtio: put paren around sizeofstephen hemminger1-1/+1
Kernel coding style is to put paren around operand of sizeof. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16tun/tap: use paren's with sizeofstephen hemminger2-2/+2
Although sizeof is an operator in C. The kernel coding style convention is to always use it like a function and add parenthesis. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: added support for ethtool --set-channels featureIntiyaz Basha6-50/+226
adding support for ethtool --set-channels feature Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved octeon_setup_interrupt to lio_core.cIntiyaz Basha4-263/+202
Moving common octeon_setup_interrupt to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved liquidio_legacy_intr_handler to lio_core.cIntiyaz Basha3-56/+57
Moving liquidio_legacy_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved liquidio_msix_intr_handler to lio_core.cIntiyaz Basha5-88/+50
Moving common liquidio_msix_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller23-65/+153
2017-08-15sfc: don't try and read ef10 data on non-ef10 NICBert Kenward1-2/+6
The MAC stats command takes a port ID, which doesn't exist on pre-ef10 NICs (5000- and 6000- series). This is extracted from the NIC specific data; we misinterpret this as the ef10 data structure, causing us to read potentially unallocated data. With a KASAN kernel this can cause errors with: BUG: KASAN: slab-out-of-bounds in efx_mcdi_mac_stats Fixes: 0a2ab4d988d7 ("sfc: set the port-id when calling MC_CMD_MAC_STATS") Reported-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15mlxsw: spectrum_router: Use correct config optionIdo Schimmel1-1/+1
I made an embarrassing mistake and used 'IPV6' instead of 'CONFIG_IPV6' around the function that updates the kernel about IPv6 neighbours activity. This can be a problem if the kernel has more neighbours than a certain threshold and it starts deleting those that are supposedly inactive. Fixes: b5f3e0d43012 ("mlxsw: spectrum_router: Fix build when IPv6 isn't enabled") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15ipv6: fib: Provide offload indication using nexthop flagsIdo Schimmel1-4/+4
IPv6 routes currently lack nexthop flags as in IPv4. This has several implications. In the forwarding path, it requires us to check the carrier state of the nexthop device and potentially ignore a linkdown route, instead of checking for RTNH_F_LINKDOWN. It also requires capable drivers to use the user facing IPv6-specific route flags to provide offload indication, instead of using the nexthop flags as in IPv4. Add nexthop flags to IPv6 routes in the 40 bytes hole and use it to provide offload indication instead of the RTF_OFFLOAD flag, which is removed while it's still not part of any official kernel release. In the near future we would like to use the field for the RTNH_F_{LINKDOWN,DEAD} flags, but this change is more involved and might not be ready in time for the current cycle. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15mlx5: remove unnecessary pci_set_drvdata()Zhu Yanjun1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not necessary to manually clear the device driver data to NULL. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15mlx4: remove unnecessary pci_set_drvdata()Zhu Yanjun1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not necessary to manually clear the device driver data to NULL. Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15Merge tag 'wireless-drivers-for-davem-2017-08-15' of ↵David S. Miller13-39/+90
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.13 This time quite a few fixes for iwlwifi and one major regression fix for brcmfmac. For the iwlwifi aggregation bug a small change was needed for mac80211, but as Johannes is still away the mac80211 patch is taken via wireless-drivers tree. brcmfmac * fix firmware crash (a recent regression in bcm4343{0,1,8} iwlwifi * Some simple PCI HW ID fix-ups and additions for family 9000 * Remove a bogus warning message with new FWs (bug #196915) * Don't allow illegal channel options to be used (bug #195299) * A fix for checksum offload in family 9000 * A fix serious throughput degradation in 11ac with multiple streams * An old bug in SMPS where the firmware was not aware of SMPS changes * Fix a memory leak in the SAR code * Fix a stuck queue case in AP mode; * Convert a WARN to a simple debug in a legitimate race case (from which we can recover) * Fix a severe throughput aggregation on 9000-family devices due to aggregation issues, needed a small change in mac80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14liquidio: fix issues with fw_type module parameterDerek Chickles1-3/+3
The fw_type module parameter isn't showing up in the /sys/module/liquidio/parameters directory. Fix it by setting the read permission bits for user, group, other in module_param_string(). Revise the description of fw_type. Initialize the fw_type static char array with the default value to conform to the module parameter description. Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14mlxsw: spectrum_router: Add support for nexthop group consolidation for IPv6Arkadi Sharshevsky1-9/+141
Due to limited ASIC resources the maximum number of routes is limited by the nexthop resource. In order to improve the routing scale nexthop consolidation should be performed. This patch adds support for IPv6 neighbor consolidation. The hash value is calculated based on the nexthop set, by performing bitwise xor on the ifindexs of the nexthops, in a similar way to IPv4's kernel implementation. In case of collision a full match is performed between the sets which include address and ifindex comparison. Non gateway nexthop groups are not inserted to the hash table due to lack of nexthop device (ifindex). Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14mlxsw: spectrum_router: Prepare nexthop group's hash table for IPv6Arkadi Sharshevsky1-17/+52
This patch does preparation before introducing IPv6 nexthop group consolidation. Currently the nexthop group hash table is used only by IPv4 and uses fixed key size. In order to support the IPv6's variable length key the current table is changed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14liquidio: added support for ethtool --set-ring featureIntiyaz Basha6-11/+160
added support for ethtool --set-ring feature Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14liquidio: moved liquidio_setup_io_queues to lio_core.cIntiyaz Basha4-216/+118
Moving common liquidio_setup_io_queues to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-11 09:44:03 +0000