summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet107-135/+130
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Add support for ethtool::rxnfcFlorian Fainelli4-0/+645
Add support for configuring classification rules using the ethtool::rxnfc API. This is useful to program the switch's CFP/TCAM to redirect specific packets to specific ports/queues for instance. For now, we allow any kind of IPv4 5-tuple matching. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Add CFP registers definitionsFlorian Fainelli1-0/+146
Add Compact Field Processor definitions for the Broadcom Starfighter 2 and compatible versions of the switch. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Configure traffic classes to queue mappingFlorian Fainelli2-0/+13
By default, all traffic goes to queue 0, re-configure the traffic classes to quality of service mapping such that priority X maps to queue X, where X is from 0 through 7. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: add an error interrupt handler for the sgmiiTimur Tabi4-7/+153
The SGMII (internal PHY) can report decode errors via an interrupt. It can also report autonegotiation status changes, but we don't need to track those. The SGMII can recover automatically from most decode errors, so we only reset the interface if we get multiple consecutive errors. It's possible for bogus decode errors to be reported while the link is being brought up. The interrupt is registered when the interface is opened, and it's enabled after the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: remove extraneous wake-on-lan codeTimur Tabi2-14/+0
The EMAC driver does not support wake-on-lan, but there is still code left-over that partially enables it. Remove that code and a few macros that support it. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: do not call emac_mac_start twiceTimur Tabi3-4/+1
emac_mac_start() uses information from the external PHY to program the MAC, so it makes no sense to call it before the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: always use autonegotiation to configure the SGMII linkTimur Tabi1-39/+10
Regardless of how the external PHY is configured, the internal PHY (the "SGMII" block) is capable of configuring the SGMII link automatically. When the external PHY link comes up, regardless of how it is configured, the SGMII link is configured automatically. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: display the phy driver info after we connectTimur Tabi2-4/+3
The PHY driver is attached only when the driver calls phy_connect_direct(). Calling phy_attached_print() to display information about the PHY driver prior to that point is meaningless. The interface can be brought down, a new PHY driver can be loaded, and the interface then brought back up. This is the correct time to display information about the attached driver. Since phy_attached_print() also prints information about the interrupt, that needs to be set as well. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: b53: use dsa_port's bridge pointerVivien Didelot2-7/+3
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: qca8k: use dsa_port's bridge pointerVivien Didelot2-9/+4
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: mv88e6xxx: use dsa_port's bridge pointerVivien Didelot2-22/+11
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: pass bridge device when a port leavesVivien Didelot4-4/+5
Upon reception of the NETDEV_CHANGEUPPER, a leaving port is already unbridged, so reflect this by assigning the port's bridge_dev pointer to NULL before calling the port_bridge_leave DSA driver operation. Now that the bridge_dev pointer is exposed to the drivers, reflecting the current state of the DSA switch fabric is necessary for the drivers to adjust their port based VLANs correctly. Pass the bridge device pointer to the port_bridge_leave operation so that drivers have all information to re-program their chips properly, and do not need to cache it anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: variable number of portsVivien Didelot3-7/+6
Change the ports[DSA_MAX_PORTS] array of the dsa_switch structure for a zero-length array, allocated at the same time as the dsa_switch structure itself. A dsa_switch_alloc() helper is provided for that. This commit brings no functional change yet since we pass DSA_MAX_PORTS as the number of ports for the moment. Future patches can update the DSA drivers separately to support dynamic number of ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29ravb: Support 1Gbps on R-Car H3 ES1.1+ and R-Car M3-WGeert Uytterhoeven1-2/+8
The limitation to 10/100Mbit speeds on R-Car Gen3 is valid for R-Car H3 ES1.0 only. Check for the exact SoC model to allow 1Gbps on newer revisions of R-Car H3, and on R-Car M3-W. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29ravb: Add tx and rx clock internal delays mode of APSRKazuya Mizuguchi2-0/+33
This patch enables tx and rx clock internal delay modes (TDM and RDM). This is to address a failure in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. With this change APSR internal delay modes are enabled for "rgmii-id", "rgmii-rxid" and "rgmii-txid" phy modes as follows: phy mode | ASPR delay mode -----------+---------------- rgmii-id | TDM and RDM rgmii-rxid | RDM rgmii-txid | TDM Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: ethernet: aquantia: return -ETIME in macro AQ_HW_WAIT_FORColin Ian King1-1/+1
The macro is returning ETIME which means various checks to see if the returned err is less than zero never work. I believe a -ETIME should be returned instead. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: ethernet: aquantia: remove another redundant err checkColin Ian King1-2/+0
The check on err < 0 is redundant and can be removed. Detected by CoverityScan, CID#1398318 ("Logically Dead Code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: ethernet: aquantia: remove redundant err checkColin Ian King1-2/+0
The check on err < 0 is redundant and can be removed. Detected by CoverityScan, CID#1398321 ("Logically Dead Code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29gtp: let userspace handle packets for invalid tunnelsAndreas Schultz1-4/+4
enable userspace to send error replies for invalid tunnels Acked-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29gtp: remove unnecessary rcu_read_lockAndreas Schultz1-20/+4
The rcu read lock is hold by default in the ip input path. There is no need to hold it twice in the socket recv decapsulate code path. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller38-216/+385
Two trivial overlapping changes conflicts in MPLS and mlx5. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27sfc: insert catch-all filters for encapsulated trafficEdward Cree2-146/+449
8000 series adapters support filtering VXLAN, NVGRE and GENEVE traffic based on inner fields, and when the NIC recognises such traffic, it does not match unencapsulated traffic filters any more. So add catch- all filters for encapsulated traffic on supporting platforms. Although recognition of VXLAN and GENEVE is based on UDP ports, and thus will not occur until the driver (on the primary PF) notifies the firmware of UDP ports to use, NVGRE will always be recognised, hence without this patch 8000 series adapters will drop all NVGRE traffic. Partly based on patches by Jon Cooper <jcooper@solarflare.com>. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27sfc: refactor debug-or-warnings printksJon Cooper2-15/+12
Rationalise several debug-or-warnings printks using netif_cond_dbg to make output more consistent. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27sfc: fixes to filter restore handlingJon Cooper1-4/+38
If the NIC is switched from full-featured to low-latency, encapsulated filters are no longer available, and this causes errors. This patch removes those filters from the filter table on restore. Also, if filters which are removed by the above, or which we fail to insert when restoring filters, were UC, MC or broadcast default filters, invalidate the corresponding vlan->default_filters entry. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27net: phy: broadcom: add support for BCM54210ERafał Miłecki1-1/+33
It's Broadcom PHY simply described as single-port RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK bits. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27Merge tag 'linux-can-next-for-4.11-20170124' of ↵David S. Miller2-11/+127
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-01-24 this is a pull request of 4 patches for net-next/master. The first patch by Oliver Hartkopp adds a netlink API to configure the interface termination of a CAN card. The next two patches are by me and add a netlink API to query and configure CAN interfaces that only support fixed bitrates. The last patch by Colin Ian King simplifies the return path in the softing_cs driver's softingcs_probe() function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27net: phy: micrel: add support for KSZ8795Sean Nyekjaer1-0/+14
This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27gtp: fix cross netns recv on gtp socketAndreas Schultz1-6/+4
The use of the passed through netlink src_net to check for a cross netns operation was wrong. Using the GTP socket and the GTP netdevice is always correct (even if the netdev has been moved to new netns after link creation). Remove the now obsolete net field from gtp_dev. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27gtp: clear DF bit on GTP packet txAndreas Schultz1-1/+1
3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8, Section 13.2.2: > Backbone router: Any router in the backbone may fragment the GTP > packet if needed, according to IPv4. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27gtp: add genl family modules aliasAndreas Schultz1-0/+1
Auto-load the module when userspace asks for the gtp netlink family. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26ravb: unmap descriptors when freeing ringsKazuya Mizuguchi1-48/+64
"swiotlb buffer is full" errors occur after repeated initialisation of a device - f.e. suspend/resume or ip link set up/down. This is because memory mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit() is not released. Resolve this problem by unmapping descriptors when freeing rings. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26net: dsa: Pass device pointer to dsa_register_switchFlorian Fainelli3-6/+5
In preparation for allowing dsa_register_switch() to be supplied with device/platform data, pass down a struct device pointer instead of a struct device_node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26liquidio: Avoid accessing skb after submitting to input queueSatanand Burla2-6/+6
Accessing skb after submitting to input queue can cause access to stale pointers if the skb ends up being transmitted and freed by that time. Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: broadcom: drop duplicated define for RGMII SKEW delayRafał Miłecki1-1/+1
We had two defines for the same bit (both were used with the MII_BCM54XX_AUXCTL_SHDWSEL_MISC register). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: broadcom: use auxctl reading helper in BCM54612E codeRafał Miłecki1-4/+2
Starting with commit 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") we have a reading helper so use it and avoid code duplication. It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs (same value shifted by 12 bits). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25virtio_net: reject XDP programs using header adjustmentJakub Kicinski1-0/+5
commit 17bedab27231 ("bpf: xdp: Allow head adjustment in XDP prog") added a new XDP helper to prepend and remove data from a frame. Make virtio_net reject programs making use of this helper until proper support is added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25virtio_net: use dev_kfree_skb for small buffer XDP receiveJohn Fastabend1-2/+6
In the small buffer case during driver unload we currently use put_page instead of dev_kfree_skb. Resolve this by adding a check for virtnet mode when checking XDP queue type. Also name the function so that the code reads correctly to match the additional check. Fixes: bb91accf2733 ("virtio-net: XDP support for small buffers") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: check rx after napi is enabledhayeswang1-1/+6
Schedule the napi after napi_enable() for rx, if it is necessary. If the rx is completed when napi is disabled, the sheduling of napi would be lost. Then, no one handles the rx packet until next napi is scheduled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: re-schedule napi for txhayeswang1-0/+3
Re-schedule napi after napi_complete() for tx, if it is necessay. In r8152_poll(), if the tx is completed after tx_bottom() and before napi_complete(), the scheduling of napi would be lost. Then, no one handles the next tx until the next napi_schedule() is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: avoid start_xmit to schedule napi when napi is disabledhayeswang1-2/+6
Stop the tx when the napi is disabled to prevent napi_schedule() is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25r8152: avoid start_xmit to call napi_schedule during autosuspendhayeswang1-3/+9
Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit() from calling napi_schedule() directly during runtime suspend. After calling napi_disable() or clearing the flag of WORK_ENABLE, scheduling the napi is useless. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25sfc: reduce severity of PIO buffer alloc failuresTomáš Pilař1-3/+15
PIO buffer allocation can fail for two valid reasons: - we've run out of them (results in -ENOSPC) - the NIC configuration doesn't support them (results in -EPERM) Since both these failures are expected netif_err is excessive. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: thunderx: Leave serdes lane config on 81/83xx to firmwareSunil Goutham1-77/+18
For DLMs and SLMs on 80/81/83xx, many lane configurations across different boards are coming up. Also kernel doesn't have any way to identify board type/info and since firmware does, just get rid of figuring out lane to serdes config and take whatever has been programmed by low level firmware. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: thunderx: Support to configure queue sizes from ethtoolSunil Goutham3-9/+65
Adds support to set Rx/Tx queue sizes from ethtool. Fixes an issue with retrieving queue size. Also sets SQ's CQ_LIMIT based on configured Tx queue size such that HW doesn't process SQEs when there is no sufficient space in CQ. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: leds: Break dependency of phy.h on phy_led_triggers.hGeert Uytterhoeven2-0/+2
<linux/phy.h> includes <linux/phy_led_triggers.h>, which is not really needed. Drop the include from <linux/phy.h>, and add it to all users that didn't include it explicitly. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: leds: Clear phy_num_led_triggers on failure to avoid crashGeert Uytterhoeven1-2/+6
phy_attach_direct() ignores errors returned by phy_led_triggers_register(). I think that's OK, as LED triggers can be considered a non-critical feature. However, this causes problems later: - phy_led_trigger_change_speed() will access the array phy_device.phy_led_triggers, which has been freed in the error path of phy_led_triggers_register(), which may lead to a crash. - phy_led_triggers_unregister() will access the same array, leading to crashes during s2ram or poweroff, like: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [<c04116d4>] (__list_del_entry_valid) from [<c05e8948>] (led_trigger_unregister+0x34/0xcc) [<c05e8948>] (led_trigger_unregister) from [<c05336c4>] (phy_led_triggers_unregister+0x28/0x34) [<c05336c4>] (phy_led_triggers_unregister) from [<c0531d44>] (phy_detach+0x30/0x74) [<c0531d44>] (phy_detach) from [<c0538bdc>] (sh_eth_close+0x64/0x9c) [<c0538bdc>] (sh_eth_close) from [<c04d4ce0>] (dpm_run_callback+0x48/0xc8) or: list_del corruption. prev->next should be dede6540, but was 2e323931 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:52! ... [<c02f6d70>] (__list_del_entry_valid) from [<c0425168>] (led_trigger_unregister+0x34/0xcc) [<c0425168>] (led_trigger_unregister) from [<c03a05a0>] (phy_led_triggers_unregister+0x28/0x34) [<c03a05a0>] (phy_led_triggers_unregister) from [<c039ec04>] (phy_detach+0x30/0x74) [<c039ec04>] (phy_detach) from [<c03a4fc0>] (sh_eth_close+0x6c/0xa4) [<c03a4fc0>] (sh_eth_close) from [<c0483234>] (__dev_close_many+0xac/0xd0) To fix this, clear phy_device.phy_num_led_triggers in the error path of phy_led_triggers_register() fails. Note that the "No phy led trigger registered for speed" message will still be printed on link speed changes, which is a good cue that something went wrong with the LED triggers. Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net-next: ethernet: mediatek: change the compatible stringJohn Crispin1-1/+1
When the binding was defined, I was not aware that mt2701 was an earlier version of the SoC. For sake of consistency, the ethernet driver should use mt2701 inside the compat string as this is the earliest SoC with the ethernet core. The ethernet driver is currently of no real use until we finish and upstream the DSA driver. There are no users of this binding yet. It should be safe to fix this now before it is too late and we need to provide backward compatibility for the mt7623-eth compat string. Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().Michael Chan1-3/+6
bnxt_get_port_module_status() calls bnxt_update_link() which expects RTNL to be held. In bnxt_sp_task() that does not hold RTNL, we need to call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to be moved to the end of bnxt_sp_task(). Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bnxt_en: Fix RTNL lock usage on bnxt_update_link().Michael Chan1-19/+18
bnxt_update_link() is called from multiple code paths. Most callers, such as open, ethtool, already hold RTNL. Only the caller bnxt_sp_task() does not. So it is a bug to take RTNL inside bnxt_update_link(). Fix it by removing the RTNL inside bnxt_update_link(). The function now expects the caller to always hold RTNL. In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling bnxt_update_link(). We also need to move the call to the end of bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 20:50:55 +0000