summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds81-911/+637
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-27net: tap: clean up an indentation issueColin Ian King1-1/+1
There is a statement that is indented too deeply, remove the extraneous tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27nfp: abm: fix memory leak in nfp_abm_u32_knode_replaceNavid Emamdoost1-4/+10
In nfp_abm_u32_knode_replace if the allocation for match fails it should go to the error handling instead of returning. Updated other gotos to have correct errno returned, too. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actionsDanielle Ratson1-0/+6
The ASIC can only mirror a packet to one port, but when user is trying to set more than one mirror action, it doesn't fail. Add a check if more than one mirror action was specified per rule and if so, fail for not being supported. Fixes: d0d13c1858a11 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27mlxsw: spectrum: Clear VLAN filters during port initializationIdo Schimmel1-0/+9
When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: ena: clean up indentation issueColin Ian King1-2/+2
There memset is indented incorrectly, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: phy: micrel: add Asym Pause workaround for KSZ9021Hans Andersson1-0/+3
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause. This patch apply the same workaround as the one for KSZ9031. Fixes: 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround") Signed-off-by: Hans Andersson <hans.andersson@cellavision.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: socionext: ave: Avoid using netdev_err() before calling register_netdev()Kunihiko Hayashi1-3/+3
Until calling register_netdev(), ndev->dev_name isn't specified, and netdev_err() displays "(unnamed net_device)". ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting ave: probe of 65000000.ethernet failed with error -22 This replaces netdev_err() with dev_err() before calling register_netdev(). Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: dsa: microchip: Always set regmap stride to 1Marek Vasut1-1/+1
The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprsNavid Emamdoost1-0/+3
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprsNavid Emamdoost1-0/+4
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabledDavid Ahern1-1/+2
A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: dsa: qca8k: Fix port enable for CPU portAndrew Lunn1-0/+3
The CPU port does not have a PHY connected to it. So calling phy_support_asym_pause() results in an Opps. As with other DSA drivers, add a guard that the port is a user port. Reported-by: Michal Vokáč <michal.vokac@ysoft.com> Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()Dan Carpenter1-1/+1
The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: nixge: Fix a signedness bug in nixge_probe()Dan Carpenter1-1/+1
The "priv->phy_mode" is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: axienet: fix a signedness bug in probeDan Carpenter1-1/+1
The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: stmmac: dwmac-meson8b: Fix signedness bug in probeDan Carpenter1-1/+1
The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: socionext: Fix a signedness bug in ave_probe()Dan Carpenter1-1/+1
The "phy_mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 4c270b55a5af ("net: ethernet: socionext: add AVE ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27enetc: Fix a signedness bug in enetc_of_get_phy()Dan Carpenter1-1/+1
The "priv->if_mode" is type phy_interface_t which is an enum. In this context GCC will treat the enum as an unsigned int so this error handling is never triggered. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: netsec: Fix signedness bug in netsec_probe()Dan Carpenter1-1/+1
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe()Dan Carpenter1-1/+1
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: hisilicon: Fix signedness bug in hix5hd2_dev_probe()Dan Carpenter1-1/+1
The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger. Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27cxgb4: Signedness bug in init_one()Dan Carpenter1-1/+1
The "chip" variable is an enum, and it's treated as unsigned int by GCC in this context so the error handling isn't triggered. Fixes: e8d452923ae6 ("cxgb4: clean up init_one") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: aquantia: Fix aq_vec_isr_legacy() return valueDan Carpenter1-9/+6
The irqreturn_t type is an enum or an unsigned int in GCC. That creates to problems because it can't detect if the self->aq_hw_ops->hw_irq_read() call fails and at the end the function always returns IRQ_HANDLED. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)' Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26wimax/i2400m: remove unlikely() from WARN*() conditionDenis Efremov1-2/+1
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely() internally. Link: http://lkml.kernel.org/r/20190829165025.15750-6-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26Merge tag 'wireless-drivers-for-davem-2019-09-26' of ↵David S. Miller9-30/+63
https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 First set of fixes for 5.4 sent during the merge window. Most are regressions fixes but the mt7615 problem has been since it was merged. iwlwifi * fix a build regression related CONFIG_THERMAL * avoid using GEO_TX_POWER_LIMIT command on certain firmware versions rtw88 * fixes for skb leaks zd1211rw * fix a compiler warning on 32 bit mt76 * fix the firmware paths for mt7615 to match with linux-firmware wil6210 * fix use of skb after free ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26net: stmmac: Fix page pool sizeThierry Reding1-1/+3
The size of individual pages in the page pool in given by an order. The order is the binary logarithm of the number of pages that make up one of the pages in the pool. However, the driver currently passes the number of pages rather than the order, so it ends up wasting quite a bit of memory. Fix this by taking the binary logarithm and passing that in the order field. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26macsec: drop skb sk before calling gro_cells_receiveXin Long1-0/+1
Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Fei Liu <feliu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26Merge tag 'mlx5-fixes-2019-09-24' of ↵David S. Miller8-65/+105
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-09-24 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.20: ('net/mlx5e: Fix traffic duplication in ethtool steering') For -stable v4.19: ('net/mlx5: Add device ID of upcoming BlueField-2') For -stable v5.3: ('net/mlx5e: Fix matching on tunnel addresses type') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26drivers: net: Fix Kconfig indentationKrzysztof Kozlowski19-151/+151
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25net: macb: Remove dead codeShubhrajyoti Datta1-3/+2
macb_64b_desc is always called when HW_DMA_CAP_64B is defined. So the return NULL can never be reached. Remove the dead code. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25net: stmmac: selftests: Flow Control test can also run with ASYM PauseJose Abreu1-1/+1
The Flow Control selftest is also available with ASYM Pause. Lets add this check to the test and fix eventual false positive failures. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25gianfar: Make reset_gfar staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/freescale/gianfar.c:2070:6: warning: symbol 'reset_gfar' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25ppp: Fix memory leak in ppp_writeTakeshi Misawa1-0/+2
When ppp is closing, __ppp_xmit_process() failed to enqueue skb and skb allocated in ppp_write() is leaked. syzbot reported : BUG: memory leak unreferenced object 0xffff88812a17bc00 (size 224): comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline] [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline] [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574 [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197 [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline] [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502 [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494 [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline] [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542 [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611 [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline] [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline] [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620 [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by freeing skb, if ppp is closing. Fixes: 6d066734e9f0 ("ppp: avoid loop in xmit recursion detection code") Reported-and-tested-by: syzbot+d9c8bf24e56416d7ce2c@syzkaller.appspotmail.com Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Tested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25net/ibmvnic: prevent more than one thread from running in resetJuliet Kim2-11/+34
The current code allows more than one thread to run in reset. This can corrupt struct adapter data. Check adapter->resetting before performing a reset, if there is another reset running delay (100 msec) before trying again. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can runJuliet Kim2-68/+157
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during a reset to avoid deadlock but linkwatch_event is fired during the reset and needs the RTNL lock. That keeps linkwatch_event process from proceeding until the reset is complete. The reset process cannot tolerate the linkwatch_event processing after reset completes, so release the RTNL lock during the process to allow a chance for linkwatch_event to run during reset. This does not guarantee that the linkwatch_event will be processed as soon as link state changes, but is an improvement over the current code where linkwatch_event processing is always delayed, which prevents transmissions on the device from being deactivated leading transmit watchdog timer to time-out. Release the RTNL lock before link state change and re-acquire after the link state change to allow linkwatch_event to grab the RTNL lock and run during the reset. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25wil6210: use after free in wil_netif_rx_any()Dan Carpenter1-1/+1
The debug code dereferences "skb" to print "skb->len" so we have to print the message before we free "skb". Fixes: f99fe49ff372 ("wil6210: add wil_netif_rx() helper function") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24skge: fix checksum byte orderStephen Hemminger1-1/+1
Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order. Reported-by: Benoit <benoit.sansoni@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-24arcnet: provide a buffer big enough to actually receive packetsUwe Kleine-König1-14/+17
struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size. The problem was noticed by the stack protector which makes the kernel oops. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-24iwlwifi: fw: don't send GEO_TX_POWER_LIMIT command to FW version 36Luca Coelho1-3/+5
The intention was to have the GEO_TX_POWER_LIMIT command in FW version 36 as well, but not all 8000 family got this feature enabled. The 8000 family is the only one using version 36, so skip this version entirely. If we try to send this command to the firmwares that do not support it, we get a BAD_COMMAND response from the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151. Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24mt76: mt7615: fix mt7615 firmware path definitionsLorenzo Bianconi2-10/+7
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in linux-firmware repository. Because of this mt7615 won't work on regular distributions like Ubuntu. Fix path definitions. Moreover remove useless firmware name pointers and use definitions directly Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24net/mlx5e: Fix matching on tunnel addresses typeDmytro Linkin1-36/+53
In mlx5 parse_tunnel_attr() function dispatch on encap IP address type is performed by directly checking flow_rule_match_key() on FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in union, first check is always true if any type of encap address is set, which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5. Determine correct IP address type by checking control key first and if it set, take address type from match.key->addr_type. Fixes: d1bda7eecd88 ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24net/mlx5e: Fix traffic duplication in ethtool steeringSaeed Mahameed1-2/+2
Before this patch, when adding multiple ethtool steering rules with identical classification, the driver used to append the new destination to the already existing hw rule, which caused the hw to forward the traffic to all destinations (rx queues). Here we avoid this by setting the "no append" mlx5 fs core flag when adding a new ethtool rule. Fixes: 6dc6071cfcde ("net/mlx5e: Add ethtool flow steering support") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24net/mlx5: Add device ID of upcoming BlueField-2Bodong Wang1-0/+1
Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx network controller. Its VFs will be using the generic VF device ID: 0x101e "ConnectX Family mlx5Gen Virtual Function". Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24net/mlx5: DR, Allow matching on vport based on vhca_idAlaa Hleihel3-8/+37
In case source_eswitch_owner_vhca_id is given as a match, the source_vport (vhca_id) will be set in case vhca_id_valid. This will allow matching on peer vports, vports that belong to the other pf. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24net/mlx5: DR, Fix getting incorrect prev node in ste_freeAlex Vesker3-16/+10
When we free an STE and the STE is in the middle of collision list, the prev_ste was obtained incorrectly from the list. To avoid such issues list_entry calls replaced with standard list API. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24net/mlx5: DR, Remove redundant vport number from actionAlex Vesker2-3/+2
The vport number is part of the vport_cap, there is no reason to store in a separate variable on the vport. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24rtw88: configure firmware after HCI startedYan-Hsuan Chuang2-3/+4
After firmware has been downloaded, driver should send some information to it through H2C commands. Those H2C commands are transmitted through TX path. But before HCI has been started, the TX path is not working completely. Such as PCI interfaces, the interrupts are not enabled, hence TX interrupts will not be issued after H2C skb has been DMAed to the device. And the H2C skbs will not be released until the device is powered off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds7-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-22net: dsa: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file for Distributed Switch Architecture drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:44:20 +0000