summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-07-29net: stmmac: manage errors returned by of_get_mac_address()Martin Blumenstingl1-0/+7
Commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") added support for reading the MAC address from an nvmem-cell. This required changing the logic to return an error pointer upon failure. If stmmac is loaded before the nvmem provider driver then of_get_mac_address() return an error pointer with -EPROBE_DEFER. Propagate this error so the stmmac driver will be probed again after the nvmem provider driver is loaded. Default to a random generated MAC address in case of any other error, instead of using the error pointer as MAC address. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: com20020-isa: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+6
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/arcnet/com20020-isa.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 205:13, 203:10, 209:7, 201:11, 207:8 Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: arc-rimi: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/arc-rimi.c: In function 'arcrimi_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/arc-rimi.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/arc-rimi.c:366:2: note: here case 3: /* Node ID */ ^~~~ drivers/net/arcnet/arc-rimi.c:367:8: warning: this statement may fall through [-Wimplicit-fallthrough=] node = ints[3]; ~~~~~^~~~~~~~~ drivers/net/arcnet/arc-rimi.c:368:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/arc-rimi.c:369:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/arc-rimi.c:370:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: com90io: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90io.c: In function 'com90io_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90io.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90io.c:366:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90io.c:367:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90io.c:368:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: com90xx: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90xx.c: In function 'com90xx_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90xx.c:695:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90xx.c:696:2: note: here case 3: /* Mem address */ ^~~~ drivers/net/arcnet/com90xx.c:697:9: warning: this statement may fall through [-Wimplicit-fallthrough=] shmem = ints[3]; ~~~~~~^~~~~~~~~ drivers/net/arcnet/com90xx.c:698:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90xx.c:699:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90xx.c:700:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27r8169: don't use MSI before RTL8168dHeiner Kallweit1-2/+7
It was reported that after resuming from suspend network fails with error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL can work around the issue, but the only actual fix is to disable MSI. So let's mimic the behavior of the vendor driver and disable MSI on all chip versions before RTL8168d. [0] https://bugzilla.kernel.org/show_bug.cgi?id=204079 Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling") Reported-by: Dušan Dragić <dragic.dusan@gmail.com> Tested-by: Dušan Dragić <dragic.dusan@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27Revert ("r8169: remove 1000/Half from supported modes")Heiner Kallweit1-4/+1
This reverts commit a6851c613fd7fccc5d1f28d5d8a0cbe9b0f4e8cc. It was reported that RTL8111b successfully finishes 1000/Full autoneg but no data flows. Reverting the original patch fixes the issue. It seems to be a HW issue with the integrated RTL8211B PHY. This PHY version used also e.g. on RTL8168d, so better revert the original patch. Reported-by: Bernhard Held <berny156@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27net: phylink: Fix flow control for fixed-linkRené van Dorst1-0/+2
In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND with pl->supported, pl->supported is zeroed and only the speed/duplex modes and MII bits are set. So pl->link_config.advertising always loses the flow control/pause bits. By setting Pause and Asym_Pause bits in pl->supported, the flow control work again when devicetree "pause" is set in fixes-link node and the MAC advertise that is supports pause. Results with this patch. Legend: - DT = 'Pause' is set in the fixed-link in devicetree. - validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the validate(). - flow = results reported my link is Up line. +-----+------------+-------+ | DT | validate() | flow | +-----+------------+-------+ | Yes | Yes | rx/tx | | No | Yes | off | | Yes | No | off | +-----+------------+-------+ Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: René van Dorst <opensource@vdorst.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26Merge tag 'mlx5-fixes-2019-07-25' of ↵David S. Miller17-81/+117
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-07-25 This series introduces some fixes to mlx5 driver. 1) Ariel is addressing an issue with enacp flow counter race condition 2) Aya fixes ethtool speed handling 3) Edward fixes modify_cq hw bits alignment 4) Maor fixes RDMA_RX capabilities handling 5) Mark reverses unregister devices order to address an issue with LAG 6) From Tariq, - wrong max num channels indication regression - TLS counters naming and documentation as suggested by Jakub - kTLS, Call WARN_ONCE on netdev mismatch There is one patch in this series that touches nfp driver to align TLS statistics names with latest documentation, Jakub is CC'ed. Please pull and let me know if there is any problem. For -stable v4.9: ('net/mlx5: Use reversed order when unregister devices') For -stable v4.20 ('net/mlx5e: Prevent encap flow counter update async to user query') ('net/mlx5: Fix modify_cq_in alignment') For -stable v5.1 ('net/mlx5e: Fix matching of speed to PRM link modes') For -stable v5.2 ('net/mlx5: Add missing RDMA_RX capabilities') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26net: qualcomm: rmnet: Fix incorrect UL checksum offload logicSubash Abhinov Kasiviswanathan1-4/+9
The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets so that the hardware can flip the checksum to 0xFFFF if the computed checksum is 0 per RFC768. However, this bit had to be set for IPv6 UDP non fragmented packets as well per hardware requirements. Otherwise, IPv6 UDP packets with computed checksum as 0 were transmitted by hardware and were dropped in the network. In addition to setting this bit for IPv6 UDP, the field is also appropriately renamed to udp_ind as part of this change. Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload") Cc: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26ocelot: Cancel delayed work before wq destructionClaudiu Manoil1-0/+1
Make sure the delayed work for stats update is not pending before wq destruction. This fixes the module unload path. The issue is there since day 1. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26qed: RDMA - Fix the hw_ver returned in device attributesMichal Kalderon1-1/+1
The hw_ver field was initialized to zero. Return the chip revision. This is relevant for rdma driver. Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26net: usb: qmi_wwan: Add the BroadMobi BM818 cardBob Ham1-0/+1
The BroadMobi BM818 M.2 card uses the QMI protocol Signed-off-by: Bob Ham <bob.ham@puri.sm> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25bnx2x: Disable multi-cos feature.Sudarsana Reddy Kalluru1-2/+1
Commit 3968d38917eb ("bnx2x: Fix Multi-Cos.") which enabled multi-cos feature after prolonged time in driver added some regression causing numerous issues (sudden reboots, tx timeout etc.) reported by customers. We plan to backout this commit and submit proper fix once we have root cause of issues reported with this feature enabled. Fixes: 3968d38917eb ("bnx2x: Fix Multi-Cos.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25nfp: tls: rename tls packet countersTariq Toukan1-2/+2
Align to the naming convention in TLS documentation. Fixes: 51a5e563298d ("nfp: tls: add basic statistics") Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5e: kTLS, Call WARN_ONCE on netdev mismatchTariq Toukan1-1/+1
A netdev mismatch in the processed TLS SKB should not occur, and indicates a kernel bug. Add WARN_ONCE to spot such cases. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5e: Prevent encap flow counter update async to user queryAriel Levkovich2-2/+7
This patch prevents a race between user invoked cached counters query and a neighbor last usage updater. The cached flow counter stats can be queried by calling "mlx5_fc_query_cached" which provides the number of bytes and packets that passed via this flow since the last time this counter was queried. It does so by reducting the last saved stats from the current, cached stats and then updating the last saved stats with the cached stats. It also provide the lastuse value for that flow. Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the last usage time of encapsulation flows, it calls the flow counter query method periodically and async to user queries of the flow counter using cls_flower. This call is causing the driver to update the last reported bytes and packets from the cache and therefore, future user queries of the flow stats will return lower than expected number for bytes and packets since the last saved stats in the driver was updated async to the last saved stats in cls_flower. This causes wrong stats presentation of encapsulation flows to user. Since the neighbor usage updater only needs the lastuse stats from the cached counter, the fix is to use a dedicated lastuse query call that returns the lastuse value without synching between the cached stats and the last saved stats. Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters") Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5e: Fix matching of speed to PRM link modesAya Levin3-32/+68
Speed translation is performed based on legacy or extended PTYS register. Translate speed with respect to: 1) Capability bit of extended PTYS table. 2) User request: a) When auto-negotiation is turned on, inspect advertisement whether it contains extended link modes. b) When auto-negotiation is turned off, speed > 100Gbps (maximal speed supported in legacy mode). With both conditions fulfilled translation is done with extended PTYS table otherwise use legacy PTYS table. Without this patch 25/50/100 Gbps speed cannot be set, since try to configure in extended mode but read from legacy mode. Fixes: dd1b9e09c12b ("net/mlx5: ethtool, Allow legacy link-modes configuration via non-extended ptys") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5e: Fix wrong max num channels indicationTariq Toukan9-41/+35
No XSK support in the enhanced IPoIB driver and representors. Add a profile property to specify this, and enhance the logic that calculates the max number of channels to take it into account. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5: Add missing RDMA_RX capabilitiesMaor Gottlieb1-2/+3
New flow table type RDMA_RX was added but the MLX5_CAP_FLOW_TABLE_TYPE didn't handle this new flow table type. This means that MLX5_CAP_FLOW_TABLE_TYPE returns an empty capability to this flow table type. Update both the macro and the maximum supported flow table type to RDMA_RX. Fixes: d83eb50e29de ("net/mlx5: Add support in RDMA RX steering") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5: Use reversed order when unregister devicesMark Zhang1-1/+1
When lag is active, which is controlled by the bonded mlx5e netdev, mlx5 interface unregestering must happen in the reverse order where rdma is unregistered (unloaded) first, to guarantee all references to the lag context in hardware is removed, then remove mlx5e netdev interface which will cleanup the lag context from hardware. Without this fix during destroy of LAG interface, we observed following errors: * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xe4ac33) * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa5aee8). Fixes: a31208b1e11d ("net/mlx5_core: New init and exit flow for mlx5_core") Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25fsl/fman: Remove comment referring to non-existent functionChris Packham1-3/+0
fm_set_max_frm() existed in the Freescale SDK as a callback for an early_param. When this code was ported to the upstream kernel the early_param was converted to a module_param making the reference to the function incorrect. The rest of the comment already does a good job of explaining the parameter so removing the reference to the non-existent function seems like the best thing to do. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25tun: mark small packets as owned by the tap sockAlexis Bauvin1-3/+6
- v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size Small packets going out of a tap device go through an optimized code path that uses build_skb() rather than sock_alloc_send_pskb(). The latter calls skb_set_owner_w(), but the small packet code path does not. The net effect is that small packets are not owned by the userland application's socket (e.g. QEMU), while large packets are. This can be seen with a TCP session, where packets are not owned when the window size is small enough (around PAGE_SIZE), while they are once the window grows (note that this requires the host to support virtio tso for the guest to offload segmentation). All this leads to inconsistent behaviour in the kernel, especially on netfilter modules that uses sk->socket (e.g. xt_owner). Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet") Signed-off-by: Alexis Bauvin <abauvin@scaleway.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25linux/dim: Fix overflow in dim calculationYamin Friedman4-5/+5
While using net_dim, a dim_sample was used without ever initializing the comps value. Added use of DIV_ROUND_DOWN_ULL() to prevent potential overflow, it should not be a problem to save the final result in an int because after the division by epms the value should not be larger than a few thousand. [ 1040.127124] UBSAN: Undefined behaviour in lib/dim/dim.c:78:23 [ 1040.130118] signed integer overflow: [ 1040.131643] 134718714 * 100 cannot be represented in type 'int' Fixes: 398c2b05bbee ("linux/dim: Add completions count to dim_sample") Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net: phy: mscc: initialize stats arrayAndreas Schwab1-8/+8
The memory allocated for the stats array may contain arbitrary data. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Fixes: 00d70d8e0e78 ("net: phy: mscc: add support for VSC8574 PHY") Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Fixes: f76178dc5218 ("net: phy: mscc: add ethtool statistics counters") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net: phylink: don't start and stop SGMII PHYs in SFP modules twiceArseny Solokha1-4/+4
SFP modules connected using the SGMII interface have their own PHYs which are handled by the struct phylink's phydev field. On the other hand, for the modules connected using 1000Base-X interface that field is not set. Since commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") phylink_start() ends up setting the phydev field using the sfp-bus infrastructure, which eventually calls phy_start() on it, and then calling phy_start() again on the same phydev from phylink_start() itself. Similar call sequence holds for phylink_stop(), only in the reverse order. This results in WARNs during network interface bringup and shutdown when a copper SFP module is connected, as phy_start() and phy_stop() are called twice in a row for the same phy_device: % ip link set up dev eth0 ------------[ cut here ]------------ called from state UP WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0 Modules linked in: CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1 NIP: c0227bf0 LR: c0227bf0 CTR: c004d224 REGS: df547720 TRAP: 0700 Not tainted (5.2.0+) MSR: 00029000 <CE,EE,ME> CR: 24002822 XER: 00000000 GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001 GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000 GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000 GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00 NIP [c0227bf0] phy_start+0x74/0xc0 LR [c0227bf0] phy_start+0x74/0xc0 Call Trace: [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable) [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4 [df547828] [c023cf08] gfar_enet_open+0x364/0x374 [df547898] [c029d870] __dev_open+0xe4/0x140 [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188 [df5478f8] [c029dc28] dev_change_flags+0x20/0x54 [df547918] [c02ae304] do_setlink+0x310/0x818 [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df547c28] [c02b222c] rtnl_newlink+0x48/0x68 [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38 --- interrupt: c01 at 0xfd4e030 LR = 0xfd4e010 Instruction dump: 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0 ---[ end trace d4c095aeaf6ea998 ]--- and % ip link set down dev eth0 ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88 <...> Call Trace: [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable) [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44 [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44 [df581858] [c0225608] phylink_stop+0x7c/0xe4 [df581868] [c023c57c] stop_gfar+0x7c/0x94 [df581888] [c023c5b8] gfar_close+0x24/0x94 [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8 [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188 [df5818f8] [c029dc28] dev_change_flags+0x20/0x54 [df581918] [c02ae304] do_setlink+0x310/0x818 [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df581c28] [c02b222c] rtnl_newlink+0x48/0x68 [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38 <...> ---[ end trace d4c095aeaf6ea999 ]--- SFP modules with the 1000Base-X interface are not affected. Place explicit calls to phy_start() and phy_stop() before enabling or after disabling an attached SFP module, where phydev is not yet set (or is already unset), so they will be made only from the inside of sfp-bus, if needed. Fixes: 217962615662 ("net: phy: warn if phy_start is called from invalid state") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24can: peak_usb: fix potential double kfree_skb()Stephane Grosjean1-4/+4
When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: flexcan: fix stop mode acknowledgmentJoakim Zhang1-4/+27
To enter stop mode, the CPU should manually assert a global Stop Mode request and check the acknowledgment asserted by FlexCAN. The CPU must only consider the FlexCAN in stop mode when both request and acknowledgment conditions are satisfied. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: flexcan: fix an use-after-free in flexcan_setup_stop_mode()Wen Yang1-3/+5
The gpr_np variable is still being used in dev_dbg() after the of_node_put() call, which may result in use-after-free. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: mcp251x: add error check when wq alloc failedWeitao Hou1-27/+22
add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163e30e ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: rcar_canfd: fix possible IRQ storm on high loadNikita Yushchenko1-4/+5
We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: dev: call netif_carrier_off() in register_candev()Rasmus Villemoes1-0/+2
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-23net: thunderx: Use fwnode_get_mac_address()Andy Shevchenko1-12/+6
Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23sky2: Disable MSI on ASUS P6TTakashi Iwai1-0/+7
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: sja1105: sja1105_main: Add of_node_put()Nishka Dasgupta1-0/+3
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: mv88e6xxx: chip: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22Revert "net: hns: fix LED configuration for marvell phy"David S. Miller1-22/+1
This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Do not cut down 1G modesJose Abreu1-8/+3
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Use kcalloc() instead of kmalloc_array()Jose Abreu1-9/+8
We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: RX Descriptors need to be clean before setting buffersJose Abreu1-2/+2
RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: hns: fix LED configuration for marvell phyYonglong Liu1-1/+22
Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 077772468ec1 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: linyunsheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: mvpp2: Don't check for 3 consecutive Idle frames for 10G linksMaxime Chevallier1-3/+3
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22bonding: Force slave speed check after link state recovery for 802.3adThomas Falcon1-0/+9
The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()Haiyang Zhang1-1/+0
There is an extra rcu_read_unlock left in netvsc_recv_callback(), after a previous patch that removes RCU from this function. This patch removes the extra RCU unlock. Fixes: 345ac08990b8 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21vrf: make sure skb->data contains ip header to make routingPeter Kosyh1-23/+35
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21qed: Prefer pcie_capability_read_word()Frederick Lawler1-3/+2
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21igc: Prefer pcie_capability_read_word()Frederick Lawler1-8/+4
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21cxgb4: Prefer pcie_capability_read_word()Frederick Lawler2-10/+5
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21be2net: Synchronize be_update_queues with dev_watchdogBenjamin Poirier1-0/+5
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21bnx2x: Prevent load reordering in tx completion processingBrian King1-0/+3
This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>