summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-09-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaGreg Kroah-Hartman1-1/+0
Jason writes: "Second RDMA rc pull request - Fix a long standing race bug when destroying comp_event file descriptors - srp, hfi1, bnxt_re: Various driver crashes from missing validation and other cases - Fixes for regressions in patches merged this window in the gid cache, devx, ucma and uapi." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Set right entry state before releasing reference IB/mlx5: Destroy the DEVX object upon error flow IB/uverbs: Free uapi on destroy RDMA/bnxt_re: Fix system crash during RDMA resource initialization IB/hfi1: Fix destroy_qp hang after a link down IB/hfi1: Fix context recovery when PBC has an UnsupportedVL IB/hfi1: Invalid user input can result in crash IB/hfi1: Fix SL array bounds check RDMA/uverbs: Fix validity check for modify QP IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop ucma: fix a use-after-free in ucma_resolve_ip() RDMA/uverbs: Atomically flush and mark closed the comp event queue cxgb4: fix abort_req_rss6 struct
2018-09-24net: mvneta: fix the remaining Rx descriptor unmapping issuesAntoine Tenart1-5/+4
With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in various places of the mvneta driver, for example when putting down an interface while traffic is passing through. The issue is when using s/w buffer management, the Rx buffers are mapped using dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23net: aquantia: memory corruption on jumbo framesFriedemann Gerold1-14/+18
This patch fixes skb_shared area, which will be corrupted upon reception of 4K jumbo packets. Originally build_skb usage purpose was to reuse page for skb to eliminate needs of extra fragments. But that logic does not take into account that skb_shared_info should be reserved at the end of skb data area. In case packet data consumes all the page (4K), skb_shinfo location overflows the page. As a consequence, __build_skb zeroed shinfo data above the allocated page, corrupting next page. The issue is rarely seen in real life because jumbo are normally larger than 4K and that causes another code path to trigger. But it 100% reproducible with simple scapy packet, like: sendp(IP(dst="192.168.100.3") / TCP(dport=443) \ / Raw(RandString(size=(4096-40))), iface="enp1s0") Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Friedemann Gerold <f.gerold@b-c-s.de> Reported-by: Michael Rauch <michael@rauch.be> Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23tun: remove ndo_poll_controllerEric Dumazet1-43/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. tun uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23nfp: remove ndo_poll_controllerEric Dumazet1-18/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. nfp uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23bnxt: remove ndo_poll_controllerEric Dumazet1-18/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnxt uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23bnx2x: remove ndo_poll_controllerEric Dumazet1-16/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnx2x uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23mlx5: remove ndo_poll_controllerEric Dumazet1-19/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx5 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23mlx4: remove ndo_poll_controllerEric Dumazet1-20/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx4 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23i40evf: remove ndo_poll_controllerEric Dumazet1-26/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. i40evf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23ice: remove ndo_poll_controllerEric Dumazet1-27/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ice uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23igb: remove ndo_poll_controllerEric Dumazet1-30/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. igb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23ixgb: remove ndo_poll_controllerEric Dumazet1-25/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. This also removes a problematic use of disable_irq() in a context it is forbidden, as explained in commit af3e0fcf7887 ("8139too: Use disable_irq_nosync() in rtl8139_poll_controller()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23fm10k: remove ndo_poll_controllerEric Dumazet3-28/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture lasts for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. fm10k uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23ixgbevf: remove ndo_poll_controllerEric Dumazet1-21/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbevf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23ixgbe: remove ndo_poll_controllerEric Dumazet1-25/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Song Liu <songliubraving@fb.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23bonding: use netpoll_poll_dev() helperEric Dumazet1-9/+2
We want to allow NAPI drivers to no longer provide ndo_poll_controller() method, as it has been proven problematic. team driver must not look at its presence, but instead call netpoll_poll_dev() which factorize the needed actions. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net/mlx4: Use cpumask_available for eq->affinity_maskNathan Chancellor1-1/+2
Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: apple: fix return type of ndo_start_xmit functionYueHaibing3-6/+6
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: i825xx: fix return type of ndo_start_xmit functionYueHaibing3-6/+9
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: wiznet: fix return type of ndo_start_xmit functionYueHaibing2-2/+2
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: sgi: fix return type of ndo_start_xmit functionYueHaibing2-3/+3
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: cirrus: fix return type of ndo_start_xmit functionYueHaibing2-3/+3
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: seeq: fix return type of ndo_start_xmit functionYueHaibing2-3/+5
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: mscc: fix the frame extraction into the skbAntoine Tenart1-3/+9
When extracting frames from the Ocelot switch, the frame check sequence (FCS) is present at the end of the data extracted. The FCS was put into the sk buffer which introduced some issues (as length related ones), as the FCS shouldn't be part of an Rx sk buffer. This patch fixes the Ocelot switch extraction behaviour by discarding the FCS. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20r8169: fix autoneg issue on resume with RTL8168EHeiner Kallweit1-0/+9
It was reported that chip version 33 (RTL8168E) ends up with 10MBit/Half on a 1GBit link after resuming from S3 (with different link partners). For whatever reason the PHY on this chip doesn't properly start a renegotiation when soft-reset. Explicitly requesting a renegotiation fixes this. Fixes: a2965f12fde6 ("r8169: remove rtl8169_set_speed_xmii") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Neil MacLeod <neil@nmacleod.com> Tested-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20bnxt_en: don't try to offload VLAN 'modify' actionDavide Caratti1-6/+14
bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20mlxsw: spectrum: Bump required firmware versionPetr Machata1-2/+2
MC-aware mode was introduced to mlxsw in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") and fixed up later in commit 3a3539cd3632 ("mlxsw: spectrum_buffers: Set up a dedicated pool for BUM traffic"). As the final piece of puzzle, a firmware issue whereby a wrong priority was assigned to BUM traffic was corrected in FW version 13.1703.4. Therefore require this FW version in the driver. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Add missing device config for RoCE EDPM in UFP mode.Sudarsana Reddy Kalluru3-22/+48
This patch adds support to configure the DORQ to use vlan-id/priority for roce EDPM. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Do not add VLAN 0 tag to untagged frames in multi-function mode.Sudarsana Reddy Kalluru2-1/+9
In certain multi-function switch dependent modes, firmware adds vlan tag 0 to the untagged frames. This leads to double tagging for the traffic if the dcbx is enabled, which is not the desired behavior. To avoid this, driver needs to set "dcb_dont_add_vlan0" flag. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Fix populating the invalid stag value in multi function mode.Sudarsana Reddy Kalluru2-1/+18
In multi-function mode, driver receives the stag value (outer vlan) for a PF from management FW (MFW). If the stag value is negotiated prior to the driver load, then the stag is not notified to the driver and hence driver will have the invalid stag value. The fix is to request the MFW for STAG value during the driver load time. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvneta: fix the Rx desc buffer DMA unmappingAntoine Tenart1-2/+2
With CONFIG_DMA_API_DEBUG enabled we now get a warning when using the mvneta driver: mvneta d0030000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001165b000] [size=4096 bytes] [mapped as page] [unmapped as single] This is because when using the s/w buffer management, the Rx descriptor buffer is mapped with dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18sfp: fix oops with ethtool -mRussell King1-2/+2
If a network interface is created prior to the SFP socket being available, ethtool can request module information. This unfortunately leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = (ptrval) [00000008] *pgd=7c400831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1480 Comm: ethtool Not tainted 4.19.0-rc3 #138 Hardware name: Broadcom Northstar Plus SoC PC is at sfp_get_module_info+0x8/0x10 LR is at dev_ethtool+0x218c/0x2afc Fix this by not filling in the network device's SFP bus pointer until SFP is fully bound, thereby avoiding the core calling into the SFP bus code. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: mvpp2: fix a txq_done race conditionAntoine Tenart1-4/+6
When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa09e2 ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18ravb: do not write 1 to reserved bitsKazuya Mizuguchi3-6/+12
EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: bnxt: Fix a uninitialized variable warning.zhong jiang1-0/+3
Fix the following compile warning: drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:49:5: warning: ‘nvm_param.dir_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18Merge tag 'mlx5-fixes-2018-09-17' of ↵David S. Miller3-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-09-17 Sorry about the previous submission of this series which was mistakenly marked for net-next, here I am resending with 'net' mark. This series provides three fixes to mlx5 core and mlx5e netdevice driver. Please pull and let me know if there's any problem. For -stable v4.16: ('net/mlx5: Check for SQ and not RQ state when modifying hairpin SQ') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: emac: fix fixed-link setup for the RTL8363SB switchChristian Lamparter1-5/+10
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Fixup the tail addr setting in xmit pathJose Abreu1-2/+3
Currently we are always setting the tail address of descriptor list to the end of the pre-allocated list. According to databook this is not correct. Tail address should point to the last available descriptor + 1, which means we have to update the tail address everytime we call the xmit function. This should make no impact in older versions of MAC but in newer versions there are some DMA features which allows the IP to fetch descriptors in advance and in a non sequential order so its critical that we set the tail address correctly. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Rework coalesce timer and fix multi-queue racesJose Abreu3-106/+145
This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17qmi_wwan: set DTR for modems in forced USB2 modeBjørn Mork1-7/+7
Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: Get and enable optional ether_clk clockHans de Goede1-0/+33
On some boards a platform clock is used as clock for the r8169 chip, this commit adds support for getting and enabling this clock (assuming it has an "ether_clk" alias set on it). This is related to commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") which is a previous attempt to fix this for some x86 boards, but this causes all Cherry Trail SoC using boards to not reach there lowest power states when suspending. This commit (together with an atom-pmc-clk driver commit adding the alias) fixes things properly by making the r8169 get the clock and enable it when it needs it. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: enable ASPM on RTL8106EKai-Heng Feng1-0/+3
The Intel SoC was prevented from entering lower idle state because of RTL8106E's ASPM was not enabled. So enable ASPM on RTL8106E (chip version 39). Now the Intel SoC can enter lower idle state, power consumption and temperature are much lower. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: Align ASPM/CLKREQ setting function with vendor driverKai-Heng Feng1-1/+3
There's a small delay after setting ASPM in vendor drivers, r8101 and r8168. In addition, those drivers enable ASPM before ClkReq, also change that to align with vendor driver. I haven't seen anything bad becasue of this, but I think it's better to keep in sync with vendor driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net/mlx5e: TLS, Read capabilities only when it is safeSaeed Mahameed1-1/+2
Read TLS caps from the core driver only when TLS is supported, i.e mlx5_accel_is_tls_device returns true. Fixes: 790af90c00d2 ("net/mlx5e: TLS, build TLS netdev from capabilities") Change-Id: I5f21ff4d684901af487e366a7e0cf032b54ee9cf Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-09-17net/mlx5: Check for SQ and not RQ state when modifying hairpin SQAlaa Hleihel1-1/+1
When modifying hairpin SQ, instead of checking if the next state equals to MLX5_SQC_STATE_RDY, we compare it against the MLX5_RQC_STATE_RDY enum value. The code worked since both of MLX5_RQC_STATE_RDY and MLX5_SQC_STATE_RDY have the same value today. This patch fixes this issue. Fixes: 18e568c390c6 ("net/mlx5: Hairpin pair core object setup") Change-Id: I6758aa7b4bd137966ae28206b70648c5bc223b46 Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-17net/mlx5: Fix read from coherent memoryEli Cohen1-1/+1
Use accessor function READ_ONCE to read from coherent memory modified by the device and read by the driver. This becomes most important in preemptive kernels where cond_resched implementation does not have the side effect which guaranteed the updated value. Fixes: 269d26f47f6f ("net/mlx5: Reduce command polling interval") Change-Id: Ie6deeb565ffaf76777b07448c7fbcce3510bbb8a Signed-off-by: Eli Cohen <eli@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-17net: ethernet: Fix a unused function warning.zhong jiang1-3/+3
Fix the following compile warning: drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function] static int lan743x_pm_suspend(struct device *dev) drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function] static int lan743x_pm_resume(struct device *dev) Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: mv88e6xxx: Fix ATU Miss ViolationAndrew Lunn2-2/+2
Fix a cut/paste error and a typo which results in ATU miss violations not being reported. Fixes: 0977644c5005 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17hv_netvsc: pair VF based on serial numberStephen Hemminger2-25/+36
Matching network device based on MAC address is problematic since a non VF network device can be creted with a duplicate MAC address causing confusion and problems. The VMBus API does provide a serial number that is a better matching method. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 16:49:17 +0000