summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-32/+52
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2019-01-02net/hamradio/6pack: use mod_timer() to rearm timersEric Dumazet1-12/+4
Using del_timer() + add_timer() is generally unsafe on SMP, as noticed by syzbot. Use mod_timer() instead. kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1026 Comm: kworker/u4:4 Not tainted 4.20.0+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound flush_to_ldisc RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0xa81/0x1470 kernel/time/timer.c:1134 Code: 4d 89 7d 40 48 c7 85 70 fe ff ff 00 00 00 00 c7 85 7c fe ff ff ff ff ff ff 48 89 85 90 fe ff ff e9 e6 f7 ff ff e8 cf 42 12 00 <0f> 0b e8 c8 42 12 00 0f 0b e8 c1 42 12 00 4c 89 bd 60 fe ff ff e9 RSP: 0018:ffff8880a7fdf5a8 EFLAGS: 00010293 RAX: ffff8880a7846340 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff816f3ee1 RDI: ffff88808a514ff8 RBP: ffff8880a7fdf760 R08: 0000000000000007 R09: ffff8880a7846c58 R10: ffff8880a7846340 R11: 0000000000000000 R12: ffff88808a514ff8 R13: ffff88808a514ff8 R14: ffff88808a514dc0 R15: 0000000000000030 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000061c500 CR3: 00000000994d9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: decode_prio_command drivers/net/hamradio/6pack.c:903 [inline] sixpack_decode drivers/net/hamradio/6pack.c:971 [inline] sixpack_receive_buf drivers/net/hamradio/6pack.c:457 [inline] sixpack_receive_buf+0xf9c/0x1470 drivers/net/hamradio/6pack.c:434 tty_ldisc_receive_buf+0x164/0x1c0 drivers/tty/tty_buffer.c:465 tty_port_default_receive_buf+0x114/0x190 drivers/tty/tty_port.c:38 receive_buf drivers/tty/tty_buffer.c:481 [inline] flush_to_ldisc+0x3b2/0x590 drivers/tty/tty_buffer.c:533 process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153 worker_thread+0x143/0x14a0 kernel/workqueue.c:2296 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-02net-next/hinic:add shutdown callbackXue Chaojing1-0/+6
If there is no shutdown callback, our board will report pcie UNF errors after restarting. This patch add shutdown callback for hinic. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENTHuazhong Tan1-3/+4
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT should call hns3_nic_net_open(), since if the number of queue or the map of TC has is changed before HHAE3_UP_CLIENT is called, it will cause problem. Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before hns3_nic_net_open() called, and set it back while hns3_nic_net_open() failed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01tap: call skb_probe_transport_header after setting skb->devWillem de Bruijn1-2/+1
The BPF flow dissector expects either skb->sk or skb->dev set on all skbs. Delay flow dissection until after skb->dev is set. This requires calling from within an rcu read-side critical section. That is fine, see also the call from tun_xdp_one. Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-31ibmveth: fix DMA unmap error in ibmveth_xmit_start error pathTyrel Datwyler1-1/+5
Commit 33a48ab105a7 ("ibmveth: Fix DMA unmap error") fixed an issue in the normal code path of ibmveth_xmit_start() that was originally introduced by Commit 6e8ab30ec677 ("ibmveth: Add scatter-gather support"). This original fix missed the error path where dma_unmap_page is wrongly called on the header portion in descs[0] which was mapped with dma_map_single. As a result a failure to DMA map any of the frags results in a dmesg warning when CONFIG_DMA_API_DEBUG is enabled. ------------[ cut here ]------------ DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single] WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10 ... <snip> ... DMA-API: Mapped at: ibmveth_start_xmit+0x30c/0xb60 dev_hard_start_xmit+0x100/0x450 sch_direct_xmit+0x224/0x490 __qdisc_run+0x20c/0x980 __dev_queue_xmit+0x1bc/0xf20 This fixes the API misuse by unampping descs[0] with dma_unmap_single. Fixes: 6e8ab30ec677 ("ibmveth: Add scatter-gather support") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30r8169: fix WoL device wakeup enableHeiner Kallweit1-2/+2
In rtl8169_runtime_resume() we configure WoL but don't set the device to wakeup-enabled. This prevents PME generation once the cable is re-plugged. Fix this by moving the call to device_set_wakeup_enable() to __rtl8169_set_wol(). Fixes: 433f9d0ddcc6 ("r8169: improve saved_wolopts handling") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30net/wan: fix a double free in x25_asy_open_tty()Cong Wang1-0/+2
When x25_asy_open() fails, it already cleans up by itself, so its caller doesn't need to free the memory again. It seems we still have to call x25_asy_free() to clear the SLF_INUSE bit, so just set these pointers to NULL after kfree(). Reported-and-tested-by: syzbot+5e5e969e525129229052@syzkaller.appspotmail.com Fixes: 3b780bed3138 ("x25_asy: Free x25_asy on x25_asy_open() failure.") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28fsl/fman: Use GFP_ATOMIC in {memac,tgec}_add_hash_mac_address()Scott Wood2-2/+2
These functions are called from atomic context: [ 9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421 [ 9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip [ 9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876f324 #29 [ 9.163130] Call Trace: [ 9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable) [ 9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164 [ 9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c [ 9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198 [ 9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218 [ 9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c [ 9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4 [ 9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54 [ 9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8 [ 9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0 [ 9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80 [ 9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08 [ 9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0 [ 9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498 [ 9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c [ 9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c [ 9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318 [ 9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444 [ 9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54 [ 9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8 [ 9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0 [ 9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28Merge tag 'usb-4.21-rc1' of ↵Linus Torvalds3-25/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits) USB: serial: option: add Fibocom NL678 series cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() usb: typec: tcpm: Extend the matching rules on PPS APDO selection usb: typec: Improve Alt Mode documentation usb: musb: dsps: fix runtime pm for peripheral mode usb: musb: dsps: fix otg state machine USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays usb: renesas_usbhs: add support for RZ/G2E usb: ehci-omap: Fix deferred probe for phy handling usb: roles: Add a description for the class to Kconfig usb: renesas_usbhs: mark PM functions as __maybe_unused usb: core: Remove unnecessary memset() usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers ...
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-5/+3
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-28Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds4-8/+8
Pull block updates from Jens Axboe: "This is the main pull request for block/storage for 4.21. Larger than usual, it was a busy round with lots of goodies queued up. Most notable is the removal of the old IO stack, which has been a long time coming. No new features for a while, everything coming in this week has all been fixes for things that were previously merged. This contains: - Use atomic counters instead of semaphores for mtip32xx (Arnd) - Cleanup of the mtip32xx request setup (Christoph) - Fix for circular locking dependency in loop (Jan, Tetsuo) - bcache (Coly, Guoju, Shenghui) * Optimizations for writeback caching * Various fixes and improvements - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith) * host and target support for NVMe over TCP * Error log page support * Support for separate read/write/poll queues * Much improved polling * discard OOM fallback * Tracepoint improvements - lightnvm (Hans, Hua, Igor, Matias, Javier) * Igor added packed metadata to pblk. Now drives without metadata per LBA can be used as well. * Fix from Geert on uninitialized value on chunk metadata reads. * Fixes from Hans and Javier to pblk recovery and write path. * Fix from Hua Su to fix a race condition in the pblk recovery code. * Scan optimization added to pblk recovery from Zhoujie. * Small geometry cleanup from me. - Conversion of the last few drivers that used the legacy path to blk-mq (me) - Removal of legacy IO path in SCSI (me, Christoph) - Removal of legacy IO stack and schedulers (me) - Support for much better polling, now without interrupts at all. blk-mq adds support for multiple queue maps, which enables us to have a map per type. This in turn enables nvme to have separate completion queues for polling, which can then be interrupt-less. Also means we're ready for async polled IO, which is hopefully coming in the next release. - Killing of (now) unused block exports (Christoph) - Unification of the blk-rq-qos and blk-wbt wait handling (Josef) - Support for zoned testing with null_blk (Masato) - sx8 conversion to per-host tag sets (Christoph) - IO priority improvements (Damien) - mq-deadline zoned fix (Damien) - Ref count blkcg series (Dennis) - Lots of blk-mq improvements and speedups (me) - sbitmap scalability improvements (me) - Make core inflight IO accounting per-cpu (Mikulas) - Export timeout setting in sysfs (Weiping) - Cleanup the direct issue path (Jianchao) - Export blk-wbt internals in block debugfs for easier debugging (Ming) - Lots of other fixes and improvements" * tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits) kyber: use sbitmap add_wait_queue/list_del wait helpers sbitmap: add helpers for add/del wait queue handling block: save irq state in blkg_lookup_create() dm: don't reuse bio for flushes nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1 blk-mq: enable IO poll if .nr_queues of type poll > 0 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight() blk-mq: skip zero-queue maps in blk_mq_map_swqueue ...
2018-12-27net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe()Wen Yang1-1/+0
This patch fixes potential double frees if register_hdlc_device() fails. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Peng Hao <peng.hao2@zte.com.cn> CC: Zhao Qiang <qiang.zhao@nxp.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: marvell: fix a missing check of acpi_match_deviceKangjie Lu1-0/+2
When acpi_match_device fails, its return value is NULL. Directly using the return value without a check may result in a NULL-pointer dereference. The fix checks if acpi_match_device fails, and if so, returns -EINVAL. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27atl1e: checking the status of atl1e_write_phy_regKangjie Lu1-1/+3
atl1e_write_phy_reg() could fail. The fix issues an error message when it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: dsa: bcm_sf2: Propagate error value from mdio_writeKangjie Lu1-4/+3
Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's return their error codes upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: stmicro: fix a missing check of clk_prepareKangjie Lu1-1/+3
clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: (cpts) fix a missing check of clk_prepareKangjie Lu1-1/+3
clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27niu: fix missing checks of niu_pci_eeprom_readKangjie Lu1-2/+8
niu_pci_eeprom_read() may fail, so we should check its return value before using the read data. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: chelsio: Add a missing check on cudg_get_bufferAditya Pakki1-0/+4
cudbg_collect_hw_sched() could fail when the function cudg_get_buffer() returns an error. The fix adds a check to the latter function returning error on failure Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27Merge branch 'linus' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
2018-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds729-17632/+45340
Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ...
2018-12-26Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds5-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The biggest RCU changes in this cycle were: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) rcutorture: Don't do busted forward-progress testing rcutorture: Use 100ms buckets for forward-progress callback histograms rcutorture: Recover from OOM during forward-progress tests rcutorture: Print forward-progress test age upon failure rcutorture: Print time since GP end upon forward-progress failure rcutorture: Print histogram of CB invocation at OOM time rcutorture: Print GP age upon forward-progress failure rcu: Print per-CPU callback counts for forward-progress failures rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings rcutorture: Dump grace-period diagnostics upon forward-progress OOM rcutorture: Prepare for asynchronous access to rcu_fwd_startat torture: Remove unnecessary "ret" variables rcutorture: Affinity forward-progress test to avoid housekeeping CPUs rcutorture: Break up too-long rcu_torture_fwd_prog() function rcutorture: Remove cbflood facility torture: Bring any extra CPUs online during kernel startup rcutorture: Add call_rcu() flooding forward-progress tests rcutorture/formal: Replace synchronize_sched() with synchronize_rcu() tools/kernel.h: Replace synchronize_sched() with synchronize_rcu() net/decnet: Replace rcu_barrier_bh() with rcu_barrier() ...
2018-12-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+10
Pull in bug fixes before respinning my net-next pull request. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24drivers/net: appletalk/cops: remove redundant if statement and maskColin Ian King1-8/+2
The two different assignments for pkt_len are actually the same and so the if statement is redundant and can be removed. Masking a u8 return value from inb() with 0xFF is also redundant and can also be emoved. Similarly, the two different outb calls are identical as the mask of 0xff on the second outb is redundant since a u8 is being written, so the if statement is also redundant and can be also removed. Detected by CoverityScan, CID#1475639 ("Identical code for different branches") V2: Remove the if statement for the outb calls, thanks to David Miller for spotting this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hwIvan Mironov1-4/+10
This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24net/mlx4_core: drop useless LIST_HEADJulia Lawall1-5/+0
Drop LIST_HEAD where the variable it declares has never been used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24mlxsw: spectrum: drop useless LIST_HEADJulia Lawall1-1/+0
Drop LIST_HEAD where the variable it declares is never used. The uses were removed in 244cd96adb5f ("net_sched: remove list_head from tc_action"), but not the declaration. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24net/mlx5e: drop useless LIST_HEADJulia Lawall1-3/+0
Drop LIST_HEAD where the variable it declares is never used. These became useless in 244cd96adb5f ("net_sched: remove list_head from tc_action") The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24net/mlx5e: fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:1339:57-58: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 4c8fb2986d44 ("net/mlx5e: Increase VF representors' SQ size to 128") CC: Gavi Teitz <gavi@mellanox.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-9/+12
2018-12-21qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixupDaniele Palmas1-7/+8
This patch fixes qmap header retrieval when modem is configured for dl data aggregation. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21qmi_wwan: Add support for Fibocom NL678 seriesJörgen Storvist1-0/+1
Added support for Fibocom NL678 series cellular module QMI interface. Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets. Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21net: netxen: fix a missing check and an uninitialized useKangjie Lu1-1/+2
When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used. The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21Merge USB 4.20-rc8 mergepoint into usb-nextGreg Kroah-Hartman66-426/+855
We need the USB changes in here for additional patches to be able to apply cleanly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-20net/mlx5e: XDP, Add user control for XDP TX MPWQE featureTariq Toukan3-1/+34
Add ethtool private flag 'xdp_tx_mpwqe' to control the feature from userspace. Feature is set ON by default, if supported. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQETariq Toukan4-27/+173
Add support for the HW feature of multi-packet WQE in XDP xmit flow. The conventional TX descriptor (WQE, Work Queue Element) serves a single packet. Our HW has support for multi-packet WQE (MPWQE) in which a single descriptor serves multiple TX packets. This reduces both the PCI overhead and the CPU cycles wasted on writing them. In this patch we add support for the HW feature, which is supported starting from ConnectX-5. Performance: Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz XDP_TX: We see a huge gain on single port ConnectX-5, and reach the 100 Mpps milestone. * Single-port HCA: Before: 70 Mpps After: 100 Mpps (+42.8%) * Dual-port HCA: Before: 51.7 Mpps After: 57.3 Mpps (+10.8%) * In both cases we tested traffic on one port and for now On Dual-port HCAs we see only small gain, we are working to overcome this bottleneck, but for the moment only with experimental firmware on dual port HCAs we can reach the wanted numbers as seen on Single-port HCAs. XDP_REDIRECT: Redirect from (A) ConnectX-5 to (B) ConnectX-5. Due to a setup limitation, (A) and (B) are on different NUMA nodes, so absolute performance numbers are not optimal. Note: Below is the transmit rate of (B), not the redirect rate of (A) which is in some cases higher. * (B) is single-port: Before: 77 Mpps After: 90 Mpps (+16.8%) * (B) is dual-port: Before: 61 Mpps After: 72 Mpps (+18%) Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Add array for WQE info descriptorsTariq Toukan3-21/+54
Each xdp_wqe_info instance describes the number of data-segments and WQEBBs of the WQE. This is useful for a downstream patch that adds support for Multi-Packet TX WQE feature. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Maintain a FIFO structure for xdp_info instancesTariq Toukan4-24/+65
This provides infrastructure to have multiple xdp_info instances for the same consumer index. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Replace boolean doorbell indication with segment pointerTariq Toukan3-18/+9
Instead of calculating the control segment to be used upon an XDP xmit doorbell, save it in SQ structure. Nullify when no pending doorbell. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Warn upon polling an error CQETariq Toukan1-0/+5
Do not ignore the CQE opcode. This helps expose issues and debug them. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Change the XDP SQ redirect indicationTariq Toukan5-26/+18
Do not maintain an SQ state bit to indicate whether an XDP SQ serves redirect operations. Instead, rely on the fact that such an XDP SQ doesn't reside in an RQ instance, while the others do. This info is not known to the XDP SQ functions themselves, and they rely on their callers to distinguish between the cases. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Precede XDP-related operations in RQ poll by a loaded ↵Tariq Toukan3-11/+18
program check At the end of the RQ polling loop, some XDP-related operations might be required. Before checking them one by one, check if an XDP program is even loaded. Combine all the checks and operations in a single function in xdp files. This saves unnecessary checks for non-XDP flows. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: TX, Print opcode in error CQE warningTariq Toukan1-3/+4
The opcode indicates about the error reason. Printing it helps in debug. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20virtio-net: ethtool configurable LROWillem de Bruijn1-0/+33
Virtio-net devices negotiate LRO support with the host. Display the initially negotiated state with ethtool -k. Also allow configuring it with ethtool -K, reusing the existing virtnet_set_guest_offloads helper that configures LRO for XDP. This is conditional on VIRTIO_NET_F_CTRL_GUEST_OFFLOADS. Virtio-net negotiates TSO4 and TSO6 separately, but ethtool does not distinguish between the two. Display LRO as on only if any offload is active. RTNL is held while calling virtnet_set_features, same as on the path from virtnet_xdp_set. Changes v1 -> v2 - allow ethtool config (-K) only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS - show LRO as enabled if any LRO variant is enabled - do not allow configuration while XDP is active - differentiate current features from the capable set, to restore on XDP down only those features that were active on XDP up - move test out of VIRTIO_NET_F_CSUM/TSO branch, which is tx only Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-17/+10
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-12-21 The following pull-request contains BPF updates for your *net-next* tree. There is a merge conflict in test_verifier.c. Result looks as follows: [...] }, { "calls: cross frame pruning", .insns = { [...] .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .errstr_unpriv = "function calls to other bpf functions are allowed for root only", .result_unpriv = REJECT, .errstr = "!read_ok", .result = REJECT, }, { "jset: functional", .insns = { [...] { "jset: unknown const compare not taken", .insns = { BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_get_prandom_u32), BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1), BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .errstr_unpriv = "!read_ok", .result_unpriv = REJECT, .errstr = "!read_ok", .result = REJECT, }, [...] { "jset: range", .insns = { [...] }, .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .result_unpriv = ACCEPT, .result = ACCEPT, }, The main changes are: 1) Various BTF related improvements in order to get line info working. Meaning, verifier will now annotate the corresponding BPF C code to the error log, from Martin and Yonghong. 2) Implement support for raw BPF tracepoints in modules, from Matt. 3) Add several improvements to verifier state logic, namely speeding up stacksafe check, optimizations for stack state equivalence test and safety checks for liveness analysis, from Alexei. 4) Teach verifier to make use of BPF_JSET instruction, add several test cases to kselftests and remove nfp specific JSET optimization now that verifier has awareness, from Jakub. 5) Improve BPF verifier's slot_type marking logic in order to allow more stack slot sharing, from Jiong. 6) Add sk_msg->size member for context access and add set of fixes and improvements to make sock_map with kTLS usable with openssl based applications, from John. 7) Several cleanups and documentation updates in bpftool as well as auto-mount of tracefs for "bpftool prog tracelog" command, from Quentin. 8) Include sub-program tags from now on in bpf_prog_info in order to have a reliable way for user space to get all tags of the program e.g. needed for kallsyms correlation, from Song. 9) Add BTF annotations for cgroup_local_storage BPF maps and implement bpf fs pretty print support, from Roman. 10) Fix bpftool in order to allow for cross-compilation, from Ivan. 11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order to be compatible with libbfd and allow for Debian packaging, from Jakub. 12) Remove an obsolete prog->aux sanitation in dump and get rid of version check for prog load, from Daniel. 13) Fix a memory leak in libbpf's line info handling, from Prashant. 14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info does not get unaligned, from Jesper. 15) Fix test_progs kselftest to work with older compilers which are less smart in optimizing (and thus throwing build error), from Stanislav. 16) Cleanup and simplify AF_XDP socket teardown, from Björn. 17) Fix sk lookup in BPF kselftest's test_sock_addr with regards to netns_id argument, from Andrey. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20ppp: Move PFC decompression to PPP generic layerSam Protsenko4-20/+62
Extract "Protocol" field decompression code from transport protocols to PPP generic layer, where it actually belongs. As a consequence, this patch fixes incorrect place of PFC decompression in L2TP driver (when it's not PPPOX_BOUND) and also enables this decompression for other protocols, like PPPoE. Protocol field decompression also happens in PPP Multilink Protocol code and in PPP compression protocols implementations (bsd, deflate, mppe). It looks like there is no easy way to get rid of that, so it was decided to leave it as is, but provide those cases with appropriate comments instead. Changes in v2: - Fix the order of checking skb data room and proto decompression - Remove "inline" keyword from ppp_decompress_proto() - Don't split line before function name - Prefix ppp_decompress_proto() function with "__" - Add ppp_decompress_proto() function with skb data room checks - Add description for introduced functions - Fix comments (as per review on mailing list) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge tag 'wireless-drivers-next-for-davem-2018-12-20' of ↵David S. Miller144-4300/+4978
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 Last set of patches for 4.21. mt76 is still in very active development and having some refactoring as well as new features. But also other drivers got few new features and fixes. Major changes: ath10k * add amsdu support for QCA6174 monitor mode * report tx rate using the new ieee80211_tx_rate_update() API * wcn3990 support is not experimental anymore iwlwifi * support for FW version 43 for 9000 and 22000 series brcmfmac * add support for CYW43012 SDIO chipset * add the raw 4354 PCIe device ID for unprogrammed Cypress boards mwifiex * add NL80211_STA_INFO_RX_BITRATE support mt76 * use the same firmware for mt76x2e and mt76x2u * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20net: mscc: ocelot: Register poll timeout should be wall time not attemptsSteen Hegelund1-28/+27
When doing indirect access in the Ocelot chip, a command is setup, issued and then we need to poll until the result is ready. The polling timeout is specified in milliseconds in the datasheet and not in register access attempts. It is not a bug on the currently supported platform, but we observed that the code does not work properly on other platforms that we want to support as the timing requirements there are different. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20mscc: Configured MAC entries should be locked.Allan W. Nielsen1-1/+1
The MAC table in Ocelot supports auto aging (normal) and static entries. MAC entries that is manually configured should be static and not subject to aging. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Allan Nielsen <allan.nielsen@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>