summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds933-18734/+55514
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09net/mlx5e: Return in default case statement in tx_post_resync_paramsNathan Chancellor1-0/+1
clang warns: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:251:2: warning: variable 'rec_seq_sz' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:255:46: note: uninitialized use occurs here skip_static_post = !memcmp(rec_seq, &rn_be, rec_seq_sz); ^~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:239:16: note: initialize the variable 'rec_seq_sz' to silence this warning u16 rec_seq_sz; ^ = 0 1 warning generated. This case statement was clearly designed to be one that should not be hit during runtime because of the WARN_ON statement so just return early to prevent copying uninitialized memory up into rn_be. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Link: https://github.com/ClangBuiltLinux/linux/issues/590 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().David S. Miller1-1/+1
Return value was changes to 'int' from void but this return statement was not updated, or it slipped in via a merge. Fixes: b5d9a834f4fd ("net/tls: don't clear TX resync flag on error") Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: remove static declaration for netsec_set_tx_de()Ilias Apalodimas1-45/+41
On commit ba2b232108d3 ("net: netsec: add XDP support") a static declaration for netsec_set_tx_de() was added to make the diff easier to read. Now that the patch is merged let's move the functions around and get rid of that Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: remove superfluous if statementIlias Apalodimas1-4/+4
While freeing tx buffers the memory has to be unmapped if the packet was an skb or was used for .ndo_xdp_xmit using the same arguments. Get rid of the unneeded extra 'else if' statement Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: rename tc_cls_flower_offload to flow_cls_offloadPablo Neira Ayuso29-207/+207
And any other existing fields in this structure that refer to tc. Specifically: * tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule(). * TC_CLSFLOWER_* to FLOW_CLS_*. * tc_cls_common_offload to tc_cls_common_offload. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: add flow_block_cb_is_busy() and use itPablo Neira Ayuso4-0/+15
This patch adds a function to check if flow block callback is already in use. Call this new function from flow_block_cb_setup_simple() and from drivers. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09drivers: net: use flow block APIPablo Neira Ayuso20-112/+243
This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*Pablo Neira Ayuso5-9/+9
Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and remove temporary tcf_block_binder_type alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BINDPablo Neira Ayuso4-10/+10
Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove temporary tc_block_command alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: add flow_block_cb_setup_simple()Pablo Neira Ayuso14-300/+62
Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Add an tx_desc to adapt HI13X1_GMACJiangfeng Xiao1-3/+31
HI13X1 changed the offsets and bitmaps for tx_desc registers in the same peripheral device on different models of the hip04_eth. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Add an rx_desc to adapt HI13X1_GMACJiangfeng Xiao1-0/+9
HI13X1 changed the offsets and bitmaps for rx_desc registers in the same peripheral device on different models of the hip04_eth. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Offset buf address to adapt HI13X1_GMACJiangfeng Xiao1-3/+17
The buf unit size of HI13X1_GMAC is cache_line_size, which is 64, so the address we write to the buf register needs to be shifted right by 6 bits. The 31st bit of the PPE_CFG_CPU_ADD_ADDR register of HI13X1_GMAC indicates whether to release the buffer of the message, and the low indicates that it is valid. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Add group field to adapt HI13X1_GMACJiangfeng Xiao1-3/+5
In general, group is the same as the port, but some boards specify a special group for better load balancing of each processing unit. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: HI13X1_GMAX need dreq reset at firstJiangfeng Xiao1-0/+24
HI13X1_GMAC delete request for soft reset at first, otherwise, the subsequent initialization will not take effect. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: HI13X1_GMAX skip write LOCAL_PAGE_REGJiangfeng Xiao1-0/+2
HI13X1_GMAC changed the offsets and bitmaps for GE_TX_LOCAL_PAGE_REG registers in the same peripheral device on different models of the hip04_eth. With the default configuration, HI13X1_GMAC can also work without any writes to the GE_TX_LOCAL_PAGE_REG register. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Cleanup for cast to restricted __be32Jiangfeng Xiao1-2/+2
This patch fixes the following warning from sparse: hip04_eth.c:533:23: warning: cast to restricted __be16 hip04_eth.c:533:23: warning: cast to restricted __be16 hip04_eth.c:533:23: warning: cast to restricted __be16 hip04_eth.c:533:23: warning: cast to restricted __be16 hip04_eth.c:534:23: warning: cast to restricted __be32 hip04_eth.c:534:23: warning: cast to restricted __be32 hip04_eth.c:534:23: warning: cast to restricted __be32 hip04_eth.c:534:23: warning: cast to restricted __be32 hip04_eth.c:534:23: warning: cast to restricted __be32 hip04_eth.c:534:23: warning: cast to restricted __be32 Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Cleanup for got restricted __be32Jiangfeng Xiao1-4/+4
This patch fixes the following warning from sparse: hip04_eth.c:468:25: warning: incorrect type in assignment hip04_eth.c:468:25: expected unsigned int [usertype] send_addr hip04_eth.c:468:25: got restricted __be32 [usertype] hip04_eth.c:469:25: warning: incorrect type in assignment hip04_eth.c:469:25: expected unsigned int [usertype] send_size hip04_eth.c:469:25: got restricted __be32 [usertype] hip04_eth.c:470:19: warning: incorrect type in assignment hip04_eth.c:470:19: expected unsigned int [usertype] cfg hip04_eth.c:470:19: got restricted __be32 [usertype] hip04_eth.c:472:23: warning: incorrect type in assignment hip04_eth.c:472:23: expected unsigned int [usertype] wb_addr hip04_eth.c:472:23: got restricted __be32 [usertype] Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: hisilicon: Add support for HI13X1 to hip04_ethJiangfeng Xiao2-7/+40
Extend the hip04_eth driver to support HI13X1_GMAC. Enable it with CONFIG_HI13X1_GMAC option. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: add support for hash table size 128/256 in dwmac4Biao Huang5-25/+42
1. get hash table size in hw feature reigster, and add support for taller hash table(128/256) in dwmac4. 2. only clear GMAC_PACKET_FILTER bits used in this function, to avoid side effect to functions of other bits. stmmac selftests output log with flow control on: ethtool -t eth0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters 0 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: dwmac4: mac address array boudary violation issueBiao Huang1-1/+1
The mac address array size is GMAC_MAX_PERFECT_ADDRESSES, so the 'reg' should be less than it, or will affect other registers. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: dsa: vsc73xx: fix NET_DSA and OF dependenciesArnd Bergmann1-0/+4
The restructuring of the driver got the dependencies wrong: without CONFIG_NET_DSA we get this build failure: WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n] Selected by [m]: - NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y] ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined! Add the appropriate dependencies. Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: mvmdio: defer probe of orion-mdio if a clock is not readyJosua Mayer1-0/+5
Defer probing of the orion-mdio interface when getting a clock returns EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used before all clocks have been enabled. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: mvmdio: print warning when orion-mdio has too many clocksJosua Mayer1-0/+4
Print a warning when device tree specifies more than the maximum of four clocks supported by orion-mdio. Because reading from mdio can lock up the Armada 8k when a required clock is not initialized, it is important to notify the user when a specified clock is ignored. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: mvmdio: allow up to four clocks to be specified for orion-mdioJosua Mayer1-1/+1
Allow up to four clocks to be specified and enabled for the orion-mdio interface, which are required by the Armada 8k and defined in armada-cp110.dtsi. Fixes a hang in probing the mvmdio driver that was encountered on the Clearfog GT 8K with all drivers built as modules, but also affects other boards such as the MacchiatoBIN. Cc: stable@vger.kernel.org Fixes: 96cb43423822 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: start using buffers if page_pool registration succeededIlias Apalodimas1-8/+9
The current driver starts using page_pool buffers before calling xdp_rxq_info_reg_mem_model(). Start using the buffers after the registration succeeded, so we won't have to call page_pool_request_shutdown() in case of failure Fixes: 5c67bf0ec4d0 ("net: netsec: Use page_pool API") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds4-7/+7
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-09net: stmmac: Introducing support for Page PoolJose Abreu3-144/+70
Mapping and unmapping DMA region is an high bottleneck in stmmac driver, specially in the RX path. This commit introduces support for Page Pool API and uses it in all RX queues. With this change, we get more stable troughput and some increase of banwidth with iperf: - MAC1000 - 950 Mbps - XGMAC: 9.22 Gbps Changes from v3: - Use page_pool_destroy() (Ilias) Changes from v2: - Uncoditionally call page_pool_free() (Jesper) Changes from v1: - Use page_pool_get_dma_addr() (Jesper) - Add a comment (Jesper) - Add page_pool_free() call (Jesper) - Reintroduce sync_single_for_device (Arnd / Ilias) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: Fix descriptors address being in > 32 bits address spaceJose Abreu7-22/+26
Commit a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC"), introduced support for > 32 bits addressing in XGMAC but the conversion of descriptors to dma_addr_t was left out. As some devices assing coherent memory in regions > 32 bits we need to set lower and upper value of descriptors address when initializing DMA channels. Luckly, this was working for me because I was assigning CMA to < 4GB address space for performance reasons. Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: Implement RX Coalesce Frames settingJose Abreu4-8/+20
Add support for coalescing RX path by specifying number of frames which don't need to have interrupt on completion bit set. This is only available when RX Watchdog is enabled. Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09bnxt_en: Add page_pool_destroy() during RX ring cleanup.Michael Chan1-6/+2
Add page_pool_destroy() in bnxt_free_rx_rings() during normal RX ring cleanup, as Ilias has informed us that the following commit has been merged: 1da4bbeffe41 ("net: core: page_pool: add user refcnt and reintroduce page_pool_destroy") The special error handling code to call page_pool_free() can now be removed. bnxt_free_rx_rings() will always be called during normal shutdown or any error paths. Fixes: 322b87ca55f2 ("bnxt_en: add page_pool support") Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net/mlx5e: Register devlink ports for physical link, PCI PF, VFsParav Pandit2-31/+78
Register devlink port of physical port, PCI PF and PCI VF flavour for each PF, VF when a given devlink instance is in switchdev mode. Implement ndo_get_devlink_port callback API to make use of registered devlink ports. This eliminates ndo_get_phys_port_name() and ndo_get_port_parent_id() callbacks. Hence, remove them. An example output with 2 VFs, without a PF and single uplink port is below. $devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0 flavour physical pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0 pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1 Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge branch 'linus' of ↵Linus Torvalds2-85/+15
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-07-08nfp: tls: undo TLS sequence tracking when dropping the frameJakub Kicinski1-0/+23
If driver has to drop the TLS frame it needs to undo the TCP sequence tracking changes, otherwise device will receive segments out of order and drop them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: tls: avoid one of the ifdefs for TLSJakub Kicinski1-4/+2
Move the #ifdef CONFIG_TLS_DEVICE a little so we can eliminate the other one. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: tls: don't leave key material in freed FW cmsg skbsJakub Kicinski1-1/+15
Make sure the contents of the skb which carried key material to the FW is cleared. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net/tls: don't clear TX resync flag on errorDirk van der Merwe2-7/+14
Introduce a return code for the tls_dev_resync callback. When the driver TX resync fails, kernel can retry the resync again until it succeeds. This prevents drivers from attempting to offload TLS packets if the connection is known to be out of sync. We don't worry about the RX resync since they will be retried naturally as more encrypted records get received. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: tls: count TSO segments separately for the TLS offloadJakub Kicinski1-1/+4
Count the number of successfully submitted TLS segments, not skbs. This will make it easier to compare the TLS encryption count against other counters. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: ccm: increase message limitsDirk van der Merwe1-3/+3
Increase the batch limit to consume small message bursts more effectively. Practically, the effect on the 'add' messages is not significant since the mailbox is sized such that the 'add' messages are still limited to the same order of magnitude that it was originally set for. Furthermore, increase the queue size limit to 1024 entries. This further improves the handling of bursts of small control messages. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: tls: use unique connection ids instead of 4-tuple for TXJakub Kicinski3-14/+34
Connection 4 tuple reuse is slightly problematic - TLS socket and context do not get destroyed until all the associated skbs left the system and all references are released. This leads to stale connection entry in the device preventing addition of new one if the 4 tuple is reused quickly enough. Instead of using read 4 tuple as the key use a unique ID. Set the protocol to TCP and port to 0 to ensure no collisions with real connections. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: tls: move setting ipver_vlan to a helperJakub Kicinski1-6/+10
Long lines are ugly. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08nfp: tls: ignore queue limits for delete commandsJakub Kicinski3-10/+24
We need to do our best not to drop delete commands, otherwise we will have stale entries in the connection table. Ignore the control message queue limits for delete commands. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: phy: Make use of linkmode_mod_bit helperFuqian Huang1-12/+4
linkmode_mod_bit is introduced as a helper function to set/clear bits in a linkmode. Replace the if else code structure with a call to the helper linkmode_mod_bit. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller53-320/+623
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08bonding: fix value exported by Netlink for peer_notif_delayVincent Bernat1-1/+1
IFLA_BOND_PEER_NOTIF_DELAY was set to the value of downdelay instead of peer_notif_delay. After this change, the correct value is exported. Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08coallocate socket_wq with socket itselfAl Viro2-8/+5
socket->wq is assign-once, set when we are initializing both struct socket it's in and struct socket_wq it points to. As the matter of fact, the only reason for separate allocation was the ability to RCU-delay freeing of socket_wq. RCU-delaying the freeing of socket itself gets rid of that need, so we can just fold struct socket_wq into the end of struct socket and simplify the life both for sock_alloc_inode() (one allocation instead of two) and for tun/tap oddballs, where we used to embed struct socket and struct socket_wq into the same structure (now - embedding just the struct socket). Note that reference to struct socket_wq in struct sock does remain a reference - that's unchanged. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: pasemi: fix an use-after-free in pasemi_mac_phy_init()Wen Yang1-1/+1
The phy_dn variable is still being used in of_phy_connect() after the of_node_put() call, which may result in use-after-free. Fixes: 1dd2d06c0459 ("net: Rework pasemi_mac driver to use of_mdio infrastructure") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: axienet: fix a potential double free in axienet_probe()Wen Yang1-1/+0
There is a possible use-after-free issue in the axienet_probe(): 1701: np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); 1702: if (np) { ... 1787: of_node_put(np); ---> released here 1788: lp->eth_irq = platform_get_irq(pdev, 0); 1789: } else { ... 1801: } 1802: if (IS_ERR(lp->dma_regs)) { ... 1805: of_node_put(np); ---> double released here 1806: goto free_netdev; 1807: } We solve this problem by removing the unnecessary of_node_put(). Fixes: 28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Robert Hancock <hancock@sedsystems.ca> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: stmmac: enable clause 45 mdio supportKweh Hock Leong1-8/+35
DWMAC4 is capable to support clause 45 mdio communication. This patch enable the feature on stmmac_mdio_write() and stmmac_mdio_read() by following phy_write_mmd() and phy_read_mmd() mdiobus read write implementation format. Reviewed-by: Li, Yifan <yifan2.li@intel.com> Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 17:49:48 +0000