summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-11-25r8169: make use of xmit_more and __netdev_sent_queueHeiner Kallweit1-10/+9
Make use of xmit_more and add the functionality introduced with 3e59020abf0f ("net: bql: add __netdev_tx_sent_queue()"). I used the mlx4 driver as template. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24net: qualcomm: rmnet: move null check on dev before dereferecing itColin Ian King1-1/+4
Currently dev is dereferenced by the call dev_net(dev) before dev is null checked. Fix this by null checking dev before the potential null pointer dereference. Detected by CoverityScan, CID#1462955 ("Dereference before null check") Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24cxgb4: remove set but not used variables 'multitrc, speed'YueHaibing1-4/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:5883:6: warning: variable 'multitrc' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:8585:32: warning: variable 'speed' set but not used [-Wunused-but-set-variable] 'multitrc' never used since introduction in commit 8e3d04fd7d70 ("cxgb4: Add MPS tracing support") 'speed' never used since introduction in commit c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller42-211/+309
2018-11-23net: gemini: Fix copy/paste errorAndreas Fiedler1-1/+1
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: phy: mscc: fix deadlock in vsc85xx_default_configQuentin Schulz1-9/+5
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queueLorenzo Bianconi1-1/+3
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23rocker, dsa, ethsw: Don't filter VLAN events on bridge itselfPetr Machata1-3/+0
Due to an explicit check in rocker_world_port_obj_vlan_add(), dsa_slave_switchdev_event() resp. port_switchdev_event(), VLAN objects that are added to a device that is not a front-panel port device are ignored. Therefore this check is immaterial. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Replace port obj add/del SDO with a notificationPetr Machata3-6/+0
Drop switchdev_ops.switchdev_port_obj_add and _del. Drop the uses of this field from all clients, which were migrated to use switchdev notification in the previous patches. Add a new function switchdev_port_obj_notify() that sends the switchdev notifications SWITCHDEV_PORT_OBJ_ADD and _DEL. Update switchdev_port_obj_del_now() to dispatch to this new function. Drop __switchdev_port_obj_add() and update switchdev_port_obj_add() likewise. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23ocelot: Handle SWITCHDEV_PORT_OBJ_ADD/_DELPetr Machata3-0/+32
Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. Dispatch the new events to ocelot_port_obj_add() resp. _del() to maintain the same behavior that the switchdev operation based code currently has. Pass through switchdev_handle_port_obj_add() / _del() to handle the recursive descend, because Ocelot supports LAG uppers. Register to the new switchdev blocking notifier chain to get the new events when they start getting distributed. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23mlxsw: spectrum_switchdev: Handle SWITCHDEV_PORT_OBJ_ADD/_DELPetr Machata1-1/+44
Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to mlxsw_sp_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Defer to switchdev_handle_port_obj_add() / _del() to handle the recursive descend, because mlxsw supports a number of upper types. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23rocker: Handle SWITCHDEV_PORT_OBJ_ADD/_DELPetr Machata1-0/+55
Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. rocker currently doesn't support any uppers other than bridge. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in rocker_world_port_obj_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Subscribe to the blocking notifier chain. In the handler, filter out notifications on any foreign netdevices. Dispatch the new notifiers to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23r8169: replace macro TX_FRAGS_READY_FOR with a functionHeiner Kallweit1-11/+13
Replace macro TX_FRAGS_READY_FOR with function rtl_tx_slots_avail to make code cleaner and type-safe. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23r8169: use napi_consume_skb where possibleHeiner Kallweit1-3/+4
Use napi_consume_skb() where possible to profit from bulk free infrastructure. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23r8169: simplify detecting chip versions with same XIDHeiner Kallweit1-12/+7
For the GMII chip versions we set the version number which was set already. This can be simplified. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23r8169: remove default chip versionsHeiner Kallweit1-10/+5
Even the chip versions within a family have so many differences that using a default chip version doesn't really make sense. Instead of leaving a best case flaky network connectivity, bail out and report the unknown chip version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23r8169: remove ancient GCC bug workaround in a second placeHeiner Kallweit1-11/+14
Remove ancient GCC bug workaround in a second place and factor out rtl_8169_get_txd_opts1. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "qos buffer" config info query functionliuzhongzhu2-0/+116
This patch prints qos buffer config information. debugfs command: echo dump qos buf cfg > cmd Sample Command: root@(none)# echo dump qos buf cfg > cmd hns3 0000:7d:00.0: dump qos buf cfg hns3 0000:7d:00.0: tx_packet_buf_tc_0: 0x1aa hns3 0000:7d:00.0: tx_packet_buf_tc_1: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_2: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_3: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_4: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_5: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_6: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_7: 0x0 hns3 0000:7d:00.0: hns3 0000:7d:00.0: rx_packet_buf_tc_0: 0x130 hns3 0000:7d:00.0: rx_packet_buf_tc_1: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_2: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_3: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_4: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_5: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_6: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_7: 0x0 hns3 0000:7d:00.0: rx_share_buf: 0x1e0e root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "qos prio map" info query functionliuzhongzhu3-0/+55
This patch prints qos priority map information. debugfs command: echo dump qos pri map > cmd Sample Command: root@(none)# echo dump qos pri map > cmd hns3 0000:7d:00.0: dump qos pri map hns3 0000:7d:00.0: vlan_to_pri: 0x0 hns3 0000:7d:00.0: pri_0_to_tc: 0x0 hns3 0000:7d:00.0: pri_1_to_tc: 0x0 hns3 0000:7d:00.0: pri_2_to_tc: 0x0 hns3 0000:7d:00.0: pri_3_to_tc: 0x0 hns3 0000:7d:00.0: pri_4_to_tc: 0x0 hns3 0000:7d:00.0: pri_5_to_tc: 0x0 hns3 0000:7d:00.0: pri_6_to_tc: 0x0 hns3 0000:7d:00.0: pri_7_to_tc: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "qos pause" config info query functionliuzhongzhu2-0/+26
This patch prints qos pause config information. debugfs command: echo dump qos pause cfg > cmd Sample Command: root@(none)# echo dump qos pause cfg > cmd hns3 0000:7d:00.0: dump qos pause cfg hns3 0000:7d:00.0: pause_trans_gap: 0xff hns3 0000:7d:00.0: pause_trans_time: 0xffff root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "tm config" info query functionliuzhongzhu2-0/+200
This patch prints Transmit Module's Traffic sched related config information. debugfs command: echo dump tm > cmd Sample output: root@(none)# echo dump tm > cmd hns3 0000:7d:00.0: dump tm hns3 0000:7d:00.0: PG_TO_PRI gp_id: 0 hns3 0000:7d:00.0: PG_TO_PRI map: 0x1 hns3 0000:7d:00.0: QS_TO_PRI qs_id: 0 hns3 0000:7d:00.0: QS_TO_PRI priority: 0 hns3 0000:7d:00.0: QS_TO_PRI link_vld: 1 hns3 0000:7d:00.0: NQ_TO_QS nq_id: 0 hns3 0000:7d:00.0: NQ_TO_QS qset_id: 1024 hns3 0000:7d:00.0: PG pg_id: 0 hns3 0000:7d:00.0: PG dwrr: 100 hns3 0000:7d:00.0: QS qs_id: 0 hns3 0000:7d:00.0: QS dwrr: 100 hns3 0000:7d:00.0: PRI pri_id: 0 hns3 0000:7d:00.0: PRI dwrr: 100 hns3 0000:7d:00.0: PRI_C pri_id: 0 hns3 0000:7d:00.0: PRI_C pri_shapping: 0x2850000 hns3 0000:7d:00.0: PRI_P pri_id: 0 hns3 0000:7d:00.0: PRI_P pri_shapping: 0x2850796 hns3 0000:7d:00.0: PG_C pg_id: 0 hns3 0000:7d:00.0: PG_C pg_shapping: 0x2850000 hns3 0000:7d:00.0: PG_P pg_id: 0 hns3 0000:7d:00.0: PG_P pg_shapping: 0x2850496 hns3 0000:7d:00.0: PORT port_shapping: 0x2850296 hns3 0000:7d:00.0: PG_SCH pg_id: 0 hns3 0000:7d:00.0: PRI_SCH pg_id: 0 hns3 0000:7d:00.0: QS_SCH pg_id: 0 hns3 0000:7d:00.0: BP_TO_QSET pg_id: 0 hns3 0000:7d:00.0: BP_TO_QSET pg_shapping: 0x0 hns3 0000:7d:00.0: BP_TO_QSET qs_bit_map: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "tc config" info query functionliuzhongzhu4-0/+48
This patch prints tc config information. debugfs command: echo dump tc > cmd Sample Output: root@(none)# echo dump tc > cmd hns3 0000:7d:00.0: weight_offset: 14 hns3 0000:7d:00.0: tc(0): no sp mode hns3 0000:7d:00.0: tc(1): no sp mode hns3 0000:7d:00.0: tc(2): no sp mode hns3 0000:7d:00.0: tc(3): no sp mode hns3 0000:7d:00.0: tc(4): no sp mode hns3 0000:7d:00.0: tc(5): no sp mode hns3 0000:7d:00.0: tc(6): no sp mode hns3 0000:7d:00.0: tc(7): no sp mode root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "FD flow table" info query functionliuzhongzhu6-1/+83
All the Flow Director rules are stored in tcam blocks. For each bit of tcam entry, the match value depends on two input value(x, y). debugfs command: echo dump fd tcam > cmd Sample output: root@(none)# echo dump fd tcam > cmd hns3 0000:7d:00.0: read result tcam key x(31): hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 08000000 hns3 0000:7d:00.0: 00000600 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: read result tcam key y(31): hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: f7ff0000 hns3 0000:7d:00.0: 0000f900 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 0000fff8 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "queue info" query functionliuzhongzhu1-0/+122
Query the queue information of the current NIC such as BD size, queue header and tail pointer. This patch adds support for debugfs command: echo queue info 1 > cmd it can print queue config information... root@(none)# echo queue info 1 > cmd hns3 0000:7d:00.0: queue info hns3 0000:7d:00.0: RX(1) BASE ADD: 0x00000000ffb58000 hns3 0000:7d:00.0: RX(1) RING BD NUM: 127 hns3 0000:7d:00.0: RX(1) RING BD LEN: 2 hns3 0000:7d:00.0: RX(1) RING TAIL: 120 hns3 0000:7d:00.0: RX(1) RING HEAD: 0 hns3 0000:7d:00.0: RX(1) RING FBDNUM: 0 hns3 0000:7d:00.0: RX(1) RING PKTNUM: 0 hns3 0000:7d:00.0: TX(1) BASE ADD: 0x00000000fffd8000 hns3 0000:7d:00.0: TX(1) RING BD NUM: 127 hns3 0000:7d:00.0: TX(1) RING TC: 0 hns3 0000:7d:00.0: TX(1) RING TAIL: 2 hns3 0000:7d:00.0: TX(1) RING HEAD: 2 hns3 0000:7d:00.0: TX(1) RING FBDNUM: 0 hns3 0000:7d:00.0: TX(1) RING OFFSET: 0 hns3 0000:7d:00.0: TX(1) RING PKTNUM: 0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add debugfs framework registrationliuzhongzhu5-3/+157
Add the debugfs framework to the driver and create a debugfs command interface for each device. example command: "echo queue info > cmd" Query the packet forwarding queue information. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: cavium: clean up return value check in cavium_ptp_probeYueHaibing1-4/+0
ptp_clock_register never return NULL, so no need check this in cavium_ptp_probe. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: phy: vitesse: remove duplicate support for VSC8574Quentin Schulz1-12/+0
A more featureful support for VSC8574 was recently added to the Microsemi (mscc.c) driver. I checked that features supported in the Vitesse driver are also supported in the Microsemi driver. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: amd: add missing of_node_put()Yangtao Li1-1/+3
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23octeontx2-af: Bringup CGX LMAC links by defaultLinu Cherian3-0/+82
- Added new CGX firmware interface API for sending link up/down commands - Do link up for cgx lmac ports by default at the time of CGX driver probe. Since cgx link up in driver probe affects the Linux boot time, linkup procedure is kept threaded using workqueues. For this, a new cgx API cgx_lmac_linkup_start has been added. Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23octeontx2-af: Unregister cgx event callbacks gracefullyLinu Cherian3-1/+43
Added provision to unregister cgx event callbacks. This enables the exit path to ensure event callbacks are unregistered before workqueues get destroyed. Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23octeontx2-af: Handle non-contiguous CGX LMAC interfacesLinu Cherian5-28/+40
For this, cgx_id(struct cgx) definition has been changed to reflect cgx port id instead of device instance id. Now cgx_id can be directly used as channel offset for NPC configuration. Assumptions on contiguous cgx port ids has been removed from nix_calibrate_x2p as well. As a side effect, allocation of conversion tables that were based on cgx count are changed to cgx port id max value. Tables would return NULL for invalid cgx ports. Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23octeontx2-af: Misc cleanups in cgx driverLinu Cherian5-37/+50
* Do CGX init before NIX init This would add consistency in NIX code that depends on cgx ports * Few other misc cleanups - rvu_cgx_probe renamed as rvu_cgx_init for consistency - rvu_cgx_exit wrapper added to take care of the exit path - Added error check on cgx_lmac_event_handler_init - Minor cleanups in cgx.h related to tab alignment - Removed redundant ids from enum cgx_cmd_id Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hinic: fix null pointer dereference on pointer hwdevColin Ian King1-2/+4
Pointer hwdev is being dereferenced when declaring hwif , however, later on hwdev is being null checked, hence we have dereference before null check error. Fix this by assigning hwif and pdef only once hwdev has been null checked. Detected by CoverityScan, CID#1485581 ("Dereference before null check") Fixes: 4a61abb100c8 ("net-next/hinic:add rx checksum offload for HiNIC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23team: no need to do team_notify_peers or team_mcast_rejoin when disabling portHangbin Liu1-2/+0
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li <liali@redhat.com> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: mvneta: remove redundant check for eee->tx_lpi_timer < 0YueHaibing1-2/+1
fixes the smatch warning: drivers/net/ethernet/marvell/mvneta.c:4252 mvneta_ethtool_set_eee() warn: unsigned 'eee->tx_lpi_timer' is never less than zero. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang1-2/+3
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: disable guest csum during XDP setJason Wang1-6/+2
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge branch '1GbE' of ↵David S. Miller13-67/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-11-21 This series contains updates to all of the Intel LAN drivers and documentation. Shannon Nelson updates the ixgbe kernel documentation to include IPsec hardware offload. Joe Perches cleans up whitespace issues in the igb driver. Jesse update the netdev kernel documentation for NETIF_F_GSO_UDP_L4 to align with the actual code. Also aligned all the NAPI driver code for all of the Intel drivers to implement the recommendations of Eric Dumazet to check the return code of the napi_complete_done() to determine whether or not to enable interrupts or exit poll. Paul E. McKenney replaces synchronize_sched() with synchronize_rcu() for ixgbe. Sasha implements suggestions made by Joe Perches to remove obsolete code and to use the dev_err() method. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23dpaa_eth: add ethtool coalesce controlMadalin Bucur1-0/+71
Allow ethtool control of the DPAA QMan portal interrupt coalescing settings. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23ravb: Clean up duplex handlingMagnus Damm2-19/+1
Since only full-duplex operation is supported by the hardware, remove duplex handling code and keep the register setting of ECMR.DM fixed at 1. This updates the driver implementation to follow the data sheet text "This bit should always be set to 1." Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23ravb: Do not announce HDX as supportedMagnus Damm1-0/+4
According to the data sheet the Ethernet-AVB hardware in R-Car Gen3 and R-Car Gen2 SoCs do not support half duplex operation. So update the driver to mark 100Mbit and 1Gbps HDX as unsupported. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23cxgb4: use new fw interface to get the VIN and smt indexSantosh Rastapur5-43/+106
If the fw supports returning VIN/VIVLD in FW_VI_CMD save it in port_info structure else retrieve these from viid and save them in port_info structure. Do the same for smt_idx from FW_VI_MAC_CMD Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: bcmgenet: remove HFB_CTRL accessDoug Berger1-4/+0
Commit c5a54bbcecec ("net: bcmgenet: abort suspend on error") mistakenly introduced register accesses that should not occur in bcmgenet_wol_power_up_cfg(). Fixes: c5a54bbcecec ("net: bcmgenet: abort suspend on error") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon1-1/+8
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon1-2/+2
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi1-2/+7
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22{net, IB}/mlx4: Initialize CQ buffers in the driver when possibleDaniel Jurgens3-5/+71
Perform CQ initialization in the driver when the capability is supported by the FW. When passing the CQ to HW indicate that the CQ buffer has been pre-initialized. Doing so decreases CQ creation time. Testing on P8 showed a single 2048 entry CQ creation time was reduced from ~395us to ~170us, which is 2.3x faster. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_nve: Allow VxLAN learningIdo Schimmel1-6/+2
Up until now the driver returned an error when learning was enabled on a VxLAN device enslaved to an offloaded bridge. Previous patches added VxLAN learning support, so remove the check. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_switchdev: Allow deletion of learned FDB entriesIdo Schimmel1-1/+2
Allow users to delete learned FDB entries from the bridge's FDB before enabling VxLAN learning. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21mlxsw: spectrum_switchdev: Process learned VxLAN FDB entriesIdo Schimmel1-14/+189
Start processing two new entry types in addition to current ones: * Learned unicast tunnel entry * Aged-out unicast tunnel entry In both cases the device reports on a new {MAC, FID, IP address} tuple that was learned / aged-out. Based on this notification, the driver instructs the device to add / delete the entry to / from its database. The driver also makes sure to notify the bridge and VxLAN drivers about the new entry. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-22 19:04:21 +0000