summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2009-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-100/+202
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
2009-03-22ucc_geth: Fix oops when using fixed-link supportAnton Vorontsov2-26/+11
commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22dm9000: locking bugfixDavid Brownell1-2/+4
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22net: update dnet.c for bus_id removalStephen Rothwell1-3/+3
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21dnet: DNET should depend on HAS_IOMEMIlya Yanok1-1/+1
Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19sungem: missing net_device_opsStephen Hemminger1-5/+4
Sungem driver only got partially converted to net_device_ops. Since this could cause bugs, please push this to 2.6.29 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycleSathya Perla1-5/+5
This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19be2net: replenish when posting to rx-queue is starved in out of mem conditionsSathya Perla2-21/+30
This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18smsc911x: reset last known duplex and carrier on openSteve Glendinning1-0/+4
smsc911x_phy_adjust_link is called periodically by the phy layer (as it's run in polling mode), and it only updates the hardware when it sees a change in duplex or carrier. This patch clears the last known values every time the interface is brought up, instead of only when the module is loaded. Without this patch the adjust_link function never updates the hardware after an ifconfig down; ifconfig up. On a full duplex link this causes the tx error counter to increment, even though packets are correctly transmitted, as the default MAC_CR register setting is for half duplex. The tx errors are "no carrier" errors, which should be ignored in full-duplex mode. When MAC_CR is set to "full duplex" mode they are correctly ignored by the hardware. Note that even with this patch the tx error counter can increment if packets are transmitted between "ifconfig up" and the first phy poll interval. An improved solution would use the phy interrupt with phylib, but I haven't managed to make this work 100% robustly yet. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18sh_eth: Fix mistake of the address of SH7763Nobuhiro Iwamatsu1-2/+2
Address of SH_TSU_ADDR and ARSTR of SH7763 was wrong. This revise it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18sh_eth: Change handling of IRQNobuhiro Iwamatsu1-3/+17
Handling of IRQ of the SH7763/SH7764 CPU which sh_eth supported was changed. This revises it for this change. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18tulip: fix crash on iface up with shirq debugKyle McMartin1-16/+29
Tulip is currently doing request_irq before it has done its initialization. This is usually not a problem because it hasn't enable interrupts yet, but with DEBUG_SHIRQ on, we call the irq handler when registering the interrupt as a sanity check. This can result in a NULL ptr dereference, so call tulip_init_ring before request_irq, and add a free_ring function to do the freeing now shared with tulip_close. Tested with a shell loop running ifup, ifdown in a loop a few hundred times with DEBUG_SHIRQ on. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18virtio_net: Make virtio_net support carrier detectionPantelis Koukousoulas1-0/+3
Impact: Make NetworkManager work with virtio_net For now the semantics are simple: There is always carrier. This allows a seamless experience with e.g., qemu/kvm where NetworkManager just configures and sets up everything automagically. If/when a generally agreed-upon way to control carrier on/off in the emulator/hypervisor level emerges, it will be trivial to extend the driver to support that too, but for now even this 2-liner makes user experience that much better. Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18bonding: Fix updating of speed/duplex changesJay Vosburgh1-5/+20
This patch corrects an omission from the following commit: commit f0c76d61779b153dbfb955db3f144c62d02173c2 Author: Jay Vosburgh <fubar@us.ibm.com> Date: Wed Jul 2 18:21:58 2008 -0700 bonding: refactor mii monitor The un-refactored code checked the link speed and duplex of every slave on every pass; the refactored code did not do so. The 802.3ad and balance-alb/tlb modes utilize the speed and duplex information, and require it to be kept up to date. This patch adds a notifier check to perform the appropriate updating when the slave device speed changes. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18bnx2: Fix problem of using wrong IRQ handler.Michael Chan1-6/+6
The MSI-X handler was chosen before the call to pci_enable_msix(). If MSI-X was not available, the wrong MSI-X handler would be used in INTA mode. This would cause a screaming interrupt problem because INTA would not be cleared by the MSI-X handler. Fixed by assigning MSI-X handler after pci_enable_msix() returns successfully. Also update version to 1.9.3. Thomas Chenault <thomas_chenault@dell.com> helped us find this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-16zd1211rw: Do not panic on device eject when associatedJouni Malinen1-2/+6
zd_op_tx() must not return an arbitrary error value since that can leave mac80211 trying to retransmit the frame and with the extra data pushed into the beginning of the skb on every attempt, this will end up causing a kernel panic (skb_under_panic from skb_push call). This can happen, e.g., when ejecting the device when associated. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: AR9280 PCI devices must serialize IO as wellLuis R. Rodriguez1-1/+2
Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: implement IO serializationLuis R. Rodriguez4-2/+55
All 802.11n PCI devices (Cardbus, PCI, mini-PCI) require serialization of IO when on non-uniprocessor systems. PCI express devices not not require this. This should fix our only last standing open ath9k kernel.org bugzilla bug report: http://bugzilla.kernel.org/show_bug.cgi?id=12110 A port is probably required to older kernels and I can work on that. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds26-217/+5671
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)" r8169: use hardware auto-padding. igb: remove ASPM L0s workaround netxen: remove old flash check. mv643xx_eth: fix unicast address filter corruption on mtu change xfrm: Fix xfrm_state_find() wrt. wildcard source address. emac: Fix clock control for 405EX and 405EXr chips ixgbe: fix multiple unicast address support via-velocity: Fix DMA mapping length errors on transmit. qlge: bugfix: Pad outbound frames smaller than 60 bytes. qlge: bugfix: Move netif_napi_del() to common call point. qlge: bugfix: Tell hw to strip vlan header. qlge: bugfix: Increase filter on inbound csum. dnet: replace obsolete *netif_rx_* functions with *napi_* net: Add be2net driver. dnet: Fix warnings on 64-bit. dnet: Dave DNET ethernet controller driver (updated) ipv6: Fix BUG when disabled ipv6 module is unloaded bnx2x: Using DMAE to initialize the chip bnx2x: Casting page alignment ...
2009-03-15r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"françois romieu1-112/+2
It fails on the following systems: - RTL8169sc/8110sc (XID 18000000) reported by Tim Durack <tdurack@gmail.com> (x86) - RTL8169sb/8110sb (XID 10000000) reported by Mikael Pettersson <mikpe@it.uu.se> (ARM) The patch appeared to work on x86 for the following systems: RTL8169sb/8110sb 10000000 PCI (EXT) RTL8110s 04000000 PCI (EXT) RTL8102e 24a00000 PCI-E (LOM) RTL8168c/8111c 3c2000c0 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (EXT) The patch exposes two problems: 1) while not completely wrong, mac addresses are not read correctly from the EEPROM 2) the MAC address registers are not correctly set Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15r8169: use hardware auto-padding.françois romieu1-8/+0
It shortens the code and fixes the current pci_unmap leak with padded skb reported by Dave Jones. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14igb: remove ASPM L0s workaroundAlexander Duyck1-24/+2
The L0s workaround should be moved into a pci quirk and so it is not necessary in the driver. This update removes the L0s workaround from the igb driver. This was the second half of the PCI quirk patch that Matthew Wilcox did not pick up when he picked up the quirk patch. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: remove old flash check.Dhananjay Phadke3-26/+0
Remove flash size check which made sense only for ancient boards with 1MB flash. The check is based on values read from specific locations and fails with firmware size changes. This prevents driver from getting right mac addresses. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13mv643xx_eth: fix unicast address filter corruption on mtu changeLennert Buytenhek1-5/+5
When mv643xx_eth_open() is called to up an interface, port_start() will first re-program the unicast address filter, and then re-initialise the PORT_CONFIG register, but that will disable unicast promiscuous mode if it was enabled by the unicast address filter setup. This isn't a problem on ifconfig up, as ->set_rx_mode() will be called shortly afterwards which will program the filters again, but it does trigger when changing the MTU, which calls mv643xx_eth_stop() and then mv643xx_eth_open() by hand to repopulate the receive rings with skbuffs of the new size. Swap the initialisation of the PORT_START register and the call to the unicast filter setup function to fix this. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13emac: Fix clock control for 405EX and 405EXr chipsBenjamin Herrenschmidt1-0/+3
The EMAC variant in the 405EX and 405EXr chips needs the "440EP" type clock control workaround to avoid lockups of the Rx side during reset. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13ixgbe: fix multiple unicast address supportChris Leech1-0/+1
Multiple unicast address support appears to have been broken with the change to support net_device_ops. This a regression from 2.6.28 to 2.6.29. I'm not 100% on whether ndo_set_multicast_list can be NULL after this or not. If ndo_set_rx_mode is set everything _should_ be using it. Signed-off-by: Chris Leech <christopher.leech@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13via-velocity: Fix DMA mapping length errors on transmit.Dave Jones1-8/+7
From: Dave Jones <davej@redhat.com> The dma-debug changes caught that this driver uses the wrong DMA mapping length when skb_padto() does something. With suggestions from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer1-0/+3
With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer1-4/+6
Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Tell hw to strip vlan header.Ron Mercer1-3/+3
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Increase filter on inbound csum.Ron Mercer2-12/+27
Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13dnet: replace obsolete *netif_rx_* functions with *napi_*Ilya Yanok1-4/+4
*netif_rx_* functions is obsolete and removed in newer kernels so we need to use corresponding *napi_* functions instead. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds1-2/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunhme: Fix qfe parent detection. sparc64: Fix lost interrupts on sun4u. sparc64: wait_event_interruptible_timeout may return -ERESTARTSYS jsflash: stop defining MAJOR_NR
2009-03-11net: Add be2net driver.Sathya Perla10-0/+4369
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11dnet: Fix warnings on 64-bit.David S. Miller1-5/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11dnet: Dave DNET ethernet controller driver (updated)Ilya Yanok4-0/+1231
Driver for Dave DNET ethernet controller found on Dave/DENX QongEVB-LITE FPGA. Heavily based on Dave sources, I've just adopted it to current kernel version and done some code cleanup. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10bnx2x: Using DMAE to initialize the chipEilon Greenstein2-13/+9
There was a bug, which occasionally caused failure in PRAM initialization after the cold boot. Also incremented version number to 1.45.27. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10bnx2x: Casting page alignmentEilon Greenstein1-1/+1
Adding a proper cast to the argument of PAGE_ALIGN macro so that the output won't depend on its original type. Without this cast aligned value will be truncated to the size of the argument type. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10bnx2x: Adding restriction on sge_buf_sizeEilon Greenstein1-1/+2
sge_buff_size may not be more than 0xffff. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Tested-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-08sunhme: Fix qfe parent detection.Friedrich Oslage1-2/+0
Signed-off-by: Friedrich Oslage <bluebird@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-06p54: fix race condition in memory managementChristian Lamparter1-3/+6
This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05iwlwifi: fix error flow in iwl*_pci_probeReinette Chatre2-12/+11
Both the agn and 3945 drivers has some problems with dealing with errors in their probe functions. Ensure that a goto will undo only things that was done before the goto was called. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05rt2x00 : more devices to rt73usb.cXose Vazquez Perez1-1/+31
add more usb_dev to rt73usb.c . IDs 'stolen' from the windows inf file(10/21/2008, 1.03.02.0000) plus some from the Ralink linux driver(2009_0206_RT73_Linux_STA_Drv1.1.0.2.tar.bz2) Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05rt2x00 : more devices to rt2500usb.cXose Vazquez Perez1-0/+8
add more usb_dev to rt2500usb.c . IDs 'stolen' from the windows inf file(02/12/2009, 2.01.01.0015). Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05bonding: Fix device passed into ->ndo_neigh_setup().Patrick McHardy1-1/+1
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2-6/+6
2009-03-04tmspci: fix request_irq raceMeelis Roos1-9/+9
Currently, tmspci tokenring driver crashes on device initialization because it requests its irq before initializing corresponding data structures. Fix this by moving request_irq call to a safer place. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04tg3: Fix 5906 link problemsMatt Carlson1-1/+2
Commit 6833c043f9fc03696fde623914c4a0277df2a0bc introduced the phy auto-powerdown capability. While the APD feature only works for 5761 and 5784 asic revisions, the (harmless portion of the) code was applied to all 5705 and newer devices. However, the 5906 phy departs from the usual design. This commit was interfering with the 5906's ability to negotiate link against some switches. This patch corrects the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04sungem: another error printed one too earlyRoel Kluin1-1/+1
Another error was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04net pcmcia: worklimit reaches -1Roel Kluin2-2/+4
with while (--worklimit >= 0); worklimit reaches -1 after the loop. In 3c589_cs.c this caused a warning not to be printed. In 3c574_cs.c contrastingly, el3_rx() treats worklimit differently: static int el3_rx(struct net_device *dev, int worklimit) { while (--worklimit >= 0) { ... } return worklimit; } el3_rx() is only called by function el3_interrupt(): twice: static irqreturn_t el3_interrupt(int irq, void *dev_id) { int work_budget = max_interrupt_work; while(...) { if (...) work_budget = el3_rx(dev, work_budget); if (...) work_budget = el3_rx(dev, work_budget); if (--work_budget < 0) { ... break; } } } The error path can occur 2 too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 05:27:56 +0000