summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2015-07-04Merge tag 'ntb-4.2' of git://github.com/jonmason/ntbLinus Torvalds2-28/+34
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
2015-07-04NTB: Split ntb_hw_intel and ntb_transport driversAllen Hubbe1-24/+30
Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-4/+142
Pull virtio/vhost cross endian support from Michael Tsirkin: "I have just queued some more bugfix patches today but none fix regressions and none are related to these ones, so it looks like a good time for a merge for -rc1. The motivation for this is support for legacy BE guests on the new LE hosts. There are two redeeming properties that made me merge this: - It's a trivial amount of code: since we wrap host/guest accesses anyway, almost all of it is well hidden from drivers. - Sane platforms would never set flags like VHOST_CROSS_ENDIAN_LEGACY, and when it's clear, there's zero overhead (as some point it was tested by compiling with and without the patches, got the same stripped binary). Maybe we could create a Kconfig symbol to enforce the second point: prevent people from enabling it eg on x86. I will look into this" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-pci: alloc only resources actually used. macvtap/tun: cross-endian support for little-endian hosts vhost: cross-endian support for legacy devices virtio: add explicit big-endian support to memory accessors vhost: introduce vhost_is_little_endian() helper vringh: introduce vringh_is_little_endian() helper macvtap: introduce macvtap_is_little_endian() helper tun: add tun_is_little_endian() helper virtio: introduce virtio_is_little_endian() helper
2015-07-02NTB: Move files in preparation for NTB abstractionAllen Hubbe2-5/+5
This patch only moves files to their new locations, before applying the next two patches adding the NTB Abstraction layer. Splitting this patch from the next is intended make distinct which code is changed only due to moving the files, versus which are substantial code changes in adding the NTB Abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-8/+2
Merge third patchbomb from Andrew Morton: - the rest of MM - scripts/gdb updates - ipc/ updates - lib/ updates - MAINTAINERS updates - various other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits) genalloc: rename of_get_named_gen_pool() to of_gen_pool_get() genalloc: rename dev_get_gen_pool() to gen_pool_get() x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit MAINTAINERS: add zpool MAINTAINERS: BCACHE: Kent Overstreet has changed email address MAINTAINERS: move Jens Osterkamp to CREDITS MAINTAINERS: remove unused nbd.h pattern MAINTAINERS: update brcm gpio filename pattern MAINTAINERS: update brcm dts pattern MAINTAINERS: update sound soc intel patterns MAINTAINERS: remove website for paride MAINTAINERS: update Emulex ocrdma email addresses bcache: use kvfree() in various places libcxgbi: use kvfree() in cxgbi_free_big_mem() target: use kvfree() in session alloc and free IB/ehca: use kvfree() in ipz_queue_{cd}tor() drm/nouveau/gem: use kvfree() in u_free() drm: use kvfree() in drm_free_large() cxgb4: use kvfree() in t4_free_mem() cxgb3: use kvfree() in cxgb_free_mem() ...
2015-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds47-332/+598
Pull networking fixes from David Miller: 1) mlx4 driver bug fixes (TX queue wakeups, csum complete indications) from Ido Shamay, Eran Ben Elisha, and Or Gerlitz. 2) Missing unlock in error path of PTP support in renesas driver, from Dan Carpenter. 3) Add Vitesse 8641 phy IDs to vitesse PHY driver, from Shaohui Xie. 4) Bnx2x driver bug fixes (linearization of encap packets, scratchpad parity error notifications, flow-control and speed settings) from Yuval Mintz, Manish Chopra, Shahed Shaikh, and Ariel Elior. 5) ipv6 extension header parsing in the igb chip has a HW errata, disable it. Frm Todd Fujinaka. 6) Fix PCI link state locking issue in e1000e driver, from Yanir Lubetkin. 7) Cure panics during MTU change in i40e, from Mitch Williams. 8) Don't leak promisc refs in DSA slave driver, from Gilad Ben-Yossef. 9) Add missing HAS_DMA dep to VIA Rhine driver, from Geery Uytterhoeven. 10) Make sure DMA map/unmap calls are symmetric in bnx2x driver, from Michal Schmidt. 11) Workaround for MDIO access problems in bcm7xxx devices, from FLorian Fainelli. 12) Fix races in SCTP protocol between OTTB responses and route removals, from Alexander Sverdlin. 13) Fix jumbo frame checksum issue with some mvneta devices, from Simon Guinot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (58 commits) sock_diag: don't broadcast kernel sockets net: mvneta: disable IP checksum with jumbo frames for Armada 370 ARM: mvebu: update Ethernet compatible string for Armada XP net: mvneta: introduce compatible string "marvell, armada-xp-neta" api: fix compatibility of linux/in.h with netinet/in.h net: icplus: fix typo in constant name sis900: Trivial: Fix typos in enums stmmac: Trivial: fix typo in constant name sctp: Fix race between OOTB responce and route removal net-Liquidio: Delete unnecessary checks before the function call "vfree" vmxnet3: Bump up driver version number amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocation net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYs net: bcmgenet: workaround initial read failures for integrated PHYs net: phy: bcm7xxx: workaround MDIO management controller initial read bnx2x: fix DMA API usage net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMA net/phy: tune get_phy_c45_ids to support more c45 phy bnx2x: fix lockdep splat net: fec: don't access RACC register when not available ...
2015-07-01Merge tag 'for-linus-4.2-rc0-tag' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and cleanups for 4.2-rc0: - add "make xenconfig" to assist in generating configs for Xen guests - preparatory cleanups necessary for supporting 64 KiB pages in ARM guests - automatically use hvc0 as the default console in ARM guests" * tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: block/xen-blkback: s/nr_pages/nr_segs/ block/xen-blkfront: Remove invalid comment block/xen-blkfront: Remove unused macro MAXIMUM_OUTSTANDING_BLOCK_REQS arm/xen: Drop duplicate define mfn_to_virt xen/grant-table: Remove unused macro SPP xen/xenbus: client: Fix call of virt_to_mfn in xenbus_grant_ring xen: Include xen/page.h rather than asm/xen/page.h kconfig: add xenconfig defconfig helper kconfig: clarify kvmconfig is for kvm xen/pcifront: Remove usage of struct timeval xen/tmem: use BUILD_BUG_ON() in favor of BUG_ON() hvc_xen: avoid uninitialized variable warning xenbus: avoid uninitialized variable warning xen/arm: allow console=hvc0 to be omitted for guests arm,arm64/xen: move Xen initialization earlier arm/xen: Correctly check if the event channel interrupt is present
2015-07-01Merge tag 'modules-next-for-linus' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
2015-06-30cxgb4: use kvfree() in t4_free_mem()Pekka Enberg1-4/+1
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: Hariprasad S <hariprasad@chelsio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30cxgb3: use kvfree() in cxgb_free_mem()Pekka Enberg1-4/+1
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: Santosh Raspatur <santosh@chelsio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30net: mvneta: disable IP checksum with jumbo frames for Armada 370Simon Guinot1-1/+25
The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't support TCP/IP checksumming with frame sizes larger than 1600 bytes. This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set to a value greater than 1600 bytes. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-30net: mvneta: introduce compatible string "marvell, armada-xp-neta"Simon Guinot1-0/+1
The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed. This patch introduces a new compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29net: icplus: fix typo in constant nameNik Nyby2-2/+2
This fixes a typo in the IPG_FRAMETOOLONGERRORS constant. Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29sis900: Trivial: Fix typos in enumsNik Nyby1-2/+2
"reigster" -> "register" Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29stmmac: Trivial: fix typo in constant nameNik Nyby1-2/+2
This fixes a typo in the MMC_RX_CRC_ERROR constant. Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29net-Liquidio: Delete unnecessary checks before the function call "vfree"Markus Elfring3-13/+5
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29vmxnet3: Bump up driver version numberShreyas Bhatewara1-2/+2
Bump up the driver version number to reflect the changes done to work with vmxnet3 adapter version 2 Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocationTom Lendacky1-1/+1
When allocating Rx related buffers, alloc_pages is called using an order number that is decreased until successful. A system under stress can experience failures during this allocation process resulting in a warning being issued. This message can be of concern to end users even though the failure is not fatal. Since the failure is not fatal and can occur multiple times, the driver should include the __GFP_NOWARN flag to suppress the warning message from being issued. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYsFlorian Fainelli1-0/+43
All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO management controller which will make the initial read or write to them to fail and return 0xffff. This is a real issue as the typical first thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id() to register a driver for these PHYs. Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this workaround for the MDIO bus controller consists in scanning the list of PHYs to do this initial read workaround for as part of the MDIO bus reset routine which is invoked prior to mdiobus_scan(). Once we have a proper PHY driver/device registered, all workarounds are located there (e.g: power management suspend/resume calls). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: bcmgenet: workaround initial read failures for integrated PHYsFlorian Fainelli2-4/+51
All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO management controller which will make the initial read or write to them to fail and return 0xffff. This is a real issue as the typical first thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id() to register a driver for these PHYs. Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this workaround for the MDIO bus controller consists in scanning the list of PHYs to do this initial read workaround for as part of the MDIO bus reset routine which is invoked prior to mdiobus_scan(). Once we have a proper PHY driver/device registered, all workarounds are located there (e.g: power management suspend/resume calls). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: phy: bcm7xxx: workaround MDIO management controller initial readFlorian Fainelli1-0/+7
The initial MDIO read or write towards the BCM7xxx integrated PHY may fail, workaround this by inserting a dummy MII_BMSR read to force the MDIO management controller to see at least one valid transaction and get out of stuck state out of reset. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28bnx2x: fix DMA API usageMichal Schmidt3-24/+12
With CONFIG_DMA_API_DEBUG=y bnx2x triggers the error "DMA-API: device driver frees DMA memory with wrong function". On archs where PAGE_SIZE > SGE_PAGE_SIZE it also triggers "DMA-API: device driver frees DMA memory with different size". Fix this by making the mapping and unmapping symmetric: - Do not map the whole pool page at once. Instead map the SGE_PAGE_SIZE-sized pieces individually, so they can be unmapped in the same manner. - What's mapped using dma_map_page() must be unmapped using dma_unmap_page(). Tested on ppc64. Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMAGeert Uytterhoeven1-0/+2
If NO_DMA=y: ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_set_mask" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined! Before, the symbols depended implicitly on HAS_DMA through PCI or USE_OF. Add explicit dependencies on HAS_DMA to fix this. Fixes: b7d3282a245f4428 ("net: via/Kconfig: replace USE_OF with OF_???") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28Merge branch 'master' of ↵David S. Miller9-104/+198
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-26 This series contains fixes for igb, e1000e and i40evf. Todd disables IPv6 extension header processing due to a hardware errata and bumps the driver version. Yanir provides six fixes for e1000e. First is a fix for a locking issue where we were not always taking the pci_bus_sem semaphore all the time when calling pci_disable_link_state_locked(), so fix the code to only call pci_disable_link_state_locked() when the semaphore has been acquired, otherwise call pci_disable_link_state(). A previous fix for i219 where the hardware prevented ULP entry caused EEE in Sx not the be enabled, so modify the code flow that allows both ULP and EEE in Sx. Fix an issue when running 10/100 full duplex on i219 where CRC errors were occurring by increasing the IPG from 8 to 0xC as per the hardware developers. Fix a data corruption issue found on some platforms by increasing the minimum gap between the PHY FIFO read and write pointers. Fix i219, which does not require the K1 workaround for LPT devices. Mitch provides a i40evf fix for a panic when changing MTU. Down was requesting queue disables, but then exited immediately without waiting for the queues to actually be disabled. This could allow any function called after i40evf_down() to run immediately, including i40evf_up(), and causes a memory leak. Fixed the issue by removing the whole reinit_locked function which allows for the driver to handle the state changes by requesting reset from the periodic timer. The second fix resolves an issue where RSS was being configured as though it is using the maximum number of queue. This can cause the device to drop a lot of receive traffic, as the packets get assigned to non-functional queues. This is resolved by only configuring RSS with the number of active queues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net/phy: tune get_phy_c45_ids to support more c45 phyShengzhou Liu1-6/+14
As some C45 10G PHYs(e.g. Cortina CS4315/CS4340 PHY) have zero Devices In package, current driver can't get correct devices_in_package value by non-zero Devices In package. so let's probe more with zero Devices In package to support more C45 PHYs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28bnx2x: fix lockdep splatEric Dumazet1-1/+2
Michel reported following lockdep splat [ 44.718117] INFO: trying to register non-static key. [ 44.723081] the code is fine but needs lockdep annotation. [ 44.728559] turning off the locking correctness validator. [ 44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0 [ 44.770289] Call Trace: [ 44.772741] [<ffffffff816eb1cd>] dump_stack+0x4c/0x65 [ 44.777879] [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510 [ 44.783708] [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10 [ 44.789538] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.795276] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.801967] [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10 [ 44.807793] [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250 [ 44.814142] [<ffffffff81112ba6>] lock_acquire+0xb6/0x290 [ 44.819537] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.824844] [<ffffffff810d66ad>] flush_work+0x3d/0x280 [ 44.830061] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.835366] [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20 [ 44.841889] [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50 [ 44.847365] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.853102] [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0 [ 44.859359] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.866045] [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0 [ 44.872048] [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x] [ 44.878481] [<ffffffff810d8670>] cancel_work_sync+0x10/0x20 [ 44.884134] [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x] [ 44.890829] [<ffffffff8110ce02>] ? up+0x32/0x50 [ 44.895439] [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0 [ 44.901005] [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x] [ 44.907527] [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0 [ 44.912921] [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x] [ 44.919879] [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x] [ 44.926664] [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40 [ 44.932148] [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20 [ 44.937364] [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630 [ 44.942582] [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70 [ 44.947972] [<ffffffff815ac013>] sock_ioctl+0x73/0x280 [ 44.953192] [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0 [ 44.958587] [<ffffffff8110d0b3>] ? up_read+0x23/0x40 [ 44.963631] [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0 [ 44.969105] [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0 [ 44.974149] [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED, we also need to guard bnx2x_stop_ptp() with same condition, otherwise ptp_task workqueue is not initialized and kernel barfs on cancel_work_sync() Fixes: eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support") Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michal Kalderon <Michal.Kalderon@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: David Decotigny <decot@google.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: fec: don't access RACC register when not availableGreg Ungerer2-13/+19
Not all silicon implementations of the Freescale FEC hardware module have the RACC (Receive Accelerator Function) register, so we should not be trying to access it on those that don't. Currently none of the ColdFire based parts with a FEC have it. Support for RACC was introduced by commit 4c09eed9 ("net: fec: Enable imx6 enet checksum acceleration"). A fix was introduced in commit d1391930 ("net: fec: Fix build for MCF5272") that disables its use on the ColdFire M5272 part, but it doesn't fix the general case of other ColdFire parts. To fix we create a quirk flag, FEC_QUIRK_HAS_RACC, and check it before working with the RACC register. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: phy: fix phy link up when limiting speed via device treeMugunthan V N1-2/+3
When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28drivers: net: xgene: Pre-initialize ret in xgene_enet_get_resources()Geert Uytterhoeven1-1/+1
If CONFIG_ACPI=n: drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_get_resources’: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:951: warning: ‘ret’ may be used uninitialized in this function If the driver is bound to a legacy platform device, ret will contain arbitrary data. If it is non-zero, it will be returned to the caller as an error code. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28xen-netfront: Remove the meaningless codeLi, Liang Z1-7/+0
The function netif_set_real_num_tx_queues() will return -EINVAL if the second parameter < 1, so call this function with the second parameter set to 0 is meaningless. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-26i40evf: don't configure unused RSS queuesMitch Williams1-1/+1
The driver will only configure as many queues as there are available CPUs, up the maximum number of queues. However, it always configures RSS as though it is using the maximum number of queues. This can cause the device to drop a lot of RX traffic, as the packets get assigned to nonfunctional queues. Fix this by only configuring RSS with the number of active queues. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26i40evf: fix panic during MTU changeMitch Williams4-65/+54
Down was requesting queue disables, but then exited immediately without waiting for the queues to actually disable. This could allow any function called after i40evf_down to run immediately, including i40evf_up, and causes a memory leak. Removing the whole reinit_locked function is the best way to go about this, and allows for the driver to handle the state changes by requesting reset from the periodic timer. Also, add a couple WARN_ONs in slow path to help us recognize if we re-introduce this issue or missed any cases. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - k1 workaround for LPT is not required for SPTYanir Lubetkin1-2/+1
In SPT hardware does not require this driver workaround. Removed the conditional that caused K1 workaround execution on SPT. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - Increase minimum FIFO read/write min gapYanir Lubetkin1-0/+46
Due to clocking changes in the Skylake platform, there was i219 data corruption. To work around this, HW team reported the need to increase the minimum gap between the PHY FIFO read and write pointers. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - increase IPG for speed 10/100 full duplexYanir Lubetkin1-3/+7
In SPT/i219, there were CRC errors in speed 10/100 full duplex. The solution given by the HW team is to increase the IPG from 8 to 0xC Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - fix to enable both ULP and EEE in Sx stateYanir Lubetkin1-13/+32
In i219, there is a hardware bug that prevented ULP entry. A side effect of the original software fix for this was that EEE in Sx couldn't be enabled. This patch implements a modified flow that allows both ULP and EEE in Sx. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: synchronization of MAC-PHY interface only on non- ME systemsYanir Lubetkin1-10/+12
On power up, the MAC - PHY interface needs to be set to PCIe, even if cable is disconnected. In ME systems, the ME handles this on exit from Sx state. In non-ME, the driver handles it. Added a check for non-ME system to the driver code that handles that. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: fix locking issue with e1000e_disable_aspmYanir Lubetkin1-4/+34
e1000e_disable_aspm called pci_disable_link_state_locked which requires pci_bus_sem to be held, but is also called from places where this semaphore was not previously acquired. This patch implements two flavors of disable_aspm, one that acquires the lock, and the other (_locked) which should be called when the semaphore is already acquired. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26igb: bump version of igb to 5.2.18Todd Fujinaka1-1/+1
Bump version of igb to igb-5.2.18 Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26igb: disable IPv6 extension header processingTodd Fujinaka2-5/+10
Disable IPv6 extension header processing as per hardware errata. Also fix copyright date. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-25netconsole: implement extended console supportTejun Heo1-2/+139
printk logbuf keeps various metadata and optional key=value dictionary for structured messages, both of which are stripped when messages are handed to regular console drivers. It can be useful to have this metadata and dictionary available to netconsole consumers. This obviously makes logging via netconsole more complete and the sequence number in particular is useful in environments where messages may be lost or reordered in transit - e.g. when netconsole is used to collect messages in a large cluster where packets may have to travel congested hops to reach the aggregator. The lost and reordered messages can easily be identified and handled accordingly using the sequence numbers. printk recently added extended console support which can be selected by setting CON_EXTENDED flag. From console driver side, not much changes. The only difference is that the text passed to the write callback is formatted the same way as /dev/kmsg. This patch implements extended console support for netconsole which can be enabled by either prepending "+" to a netconsole boot param entry or echoing 1 to "extended" file in configfs. When enabled, netconsole transmits extended log messages with headers identical to /dev/kmsg output. There's one complication due to message fragments. netconsole limits the maximum message size to 1k and messages longer than that are split into multiple fragments. As all extended console messages should carry matching headers and be uniquely identifiable, each extended message fragment carries full copy of the metadata and an extra header field to identify the specific fragment. The optional header is of the form "ncfrag=OFF/LEN" where OFF is the byte offset into the message body and LEN is the total length. To avoid unnecessarily making printk format extended messages, Extended netconsole is registered with printk when the first extended netconsole is configured. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25netconsole: make all dynamic netconsoles share a mutexTejun Heo1-5/+3
Currently, each dynamic netconsole_target uses its own separate mutex to synchronize the configuration operations. This patch replaces the per-netconsole_target mutexes with a single mutex - dynamic_netconsole_mutex. The reduced granularity doesn't hurt anything, the code is minutely simpler and this'd allow adding operations which should be synchronized across all dynamic netconsoles. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25netconsole: make netconsole_target->enabled a boolTejun Heo1-9/+9
netconsole uses both bool and int for boolean values. Let's convert nt->enabled to bool for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25netconsole: remove unnecessary netconsole_target_get/out() from write_msg()Tejun Heo1-2/+0
write_msg() grabs target_list_lock and walks target_list invoking netpool_send_udp() on each target. Curiously, it protects each iteration with netconsole_target_get/put() even though it never releases target_list_lock which protects all the members. While this doesn't harm anything, it doesn't serve any purpose either. The items on the list can't go away while target_list_lock is held. Remove the unnecessary get/put pair. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25bnx2x: Fix linearization for encapsulated packetsYuval Mintz1-2/+7
Due to FW constraints, driver must make sure that transmitted SKBs will not be too fragmented, or in the case that they are - that each 'window' of fragments passed to the FW would contain at least an mss worth of data. For encapsultaed packets the calculation is wrong, since it ignores the inner headers in the calculation of the headers' length. This could lead to a FW assertion in case of a too-fragmented encapsulated packet. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25bnx2x: Release nvram lock on error flowYuval Mintz1-0/+1
During an error flow when trying to access the nvram the driver doesn't release the hw lock it acquired. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25bnx2x: Fix statistics gathering on link changeAriel Elior1-0/+2
Since driver statistics flow access MACs and those might reset during link re-configurations, when we're about to change link properties we have to make sure that statistics are not operational. Statisics would be re-enabled [i.e., gathering of statistics would re-commence] once physical link is achieved again. Since driver employs a link-flap avoidance scheme, there are scenarios where driver will receive no indication that the new link is up, and as a result the statistics would not be re-enabled. Preventing LFA from working in such cases would guarantee that we'll always receive such indications and thus will fix statistics gathering. Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25bnx2x: Fix self-test for 20g devicesYuval Mintz1-4/+8
20g-capable devices are not configured properly for self-test, using 10g as their speed which cause the link indication to remain down and fail the internal loopback test. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25bnx2x: Fix VF MAC removalShahed Shaikh1-1/+1
There's a bug in today's driver where VF requests to add/remove MAC filters always reach the Hypervisor as add requests. This prevents the VF from changing its MAC address, as it cannot remove the previously configured MAC and runs out of MAC credits. Signed-off-by: Shahed Shaikh <Shahed.Shaikh@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25bnx2x: Don't notify about scratchpad paritiesManish Chopra2-10/+21
The scratchpad is a shared block between all functions of a given device. Due to HW limitations, we can't properly close its parity notifications to all functions on legal flows. E.g., it's possible that while taking a register dump from one function a parity error would be triggered on other functions. Today driver doesn't consider this parity as a 'real' parity unless its being accompanied by additional indications [which would happen in a real parity scenario]; But it does print notifications for such events in the system logs. This eliminates such prints - in case of real parities driver would have additional indications; But if this is the only signal user will not even see a parity being logged in the system. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>