summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2006-11-21[TG3]: Add missing unlock in tg3_open() error path.Ira W. Snyder1-1/+3
Sparse noticed a locking imbalance in tg3_open(). This patch adds an unlock to one of the error paths, so that tg3_open() always exits without the lock held. Signed-off-by: Ira W. Snyder <kernel@irasnyder.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15[TG3]: Disable TSO on 5906 if CLKREQ is enabled.Michael Chan1-4/+16
Due to hardware errata, TSO must be disabled if the PCI Express clock request is enabled on 5906. The chip may hang when transmitting TSO frames if CLKREQ is enabled. Update version to 3.69. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15[TG3]: Increase 5906 firmware poll time.Gary Zambrano1-2/+3
Newer 5906 bootcode needs about 7ms to finish resetting so the poll firmware loop was changed to maximum 20ms. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-10Merge branch 'upstream-fixes' of ↵Jeff Garzik1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-11-10[PATCH] drivers cris: return on NULL dev_alloc_skb()David Rientjes1-0/+2
If the next descriptor array entry cannot be allocated by dev_alloc_skb(), return immediately so it is not dereferenced later. We cannot register the device with a partial descriptor list. Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10[PATCH] com20020 build fixRandy Dunlap1-2/+5
com20020.c needs to export functions if either of the ISA or PCI modules are built as loadable modules. Or they could always be exported. WARNING: "com20020_found" [drivers/net/arcnet/com20020-pci.ko] undefined! WARNING: "com20020_check" [drivers/net/arcnet/com20020-pci.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10[PATCH] bonding: lockdep annotationPeter Zijlstra1-0/+5
============================================= [ INFO: possible recursive locking detected ] 2.6.17-1.2600.fc6 #1 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-07[PATCH] bcm43xx: Add error checking in bcm43xx_sprom_write()Adrian Bunk1-2/+2
The Coverity checker noted that these "if (err)"'s couldn't ever be true. It seems the intention was to check the return values of the bcm43xx_pci_write_config32()'s? Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-07[PATCH] bcm43xx: Drain TX status before starting IRQsMichael Buesch1-0/+18
Drain the Microcode TX-status-FIFO before we enable IRQs. This is required, because the FIFO may still have entries left from a previous run. Those would immediately fire after enabling IRQs and would lead to an oops in the DMA TXstatus handling code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-07[TG3]: Fix array overrun in tg3_read_partno().Michael Chan1-7/+12
Use proper upper limits for the loops and check for all error conditions. The problem was noticed by Adrian Bunk. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-07[NET]: kconfig, correct traffic shaperJiri Slaby1-4/+4
As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-07[PATCH] e1000: Fix regression: garbled stats and irq allocation during swsuspAuke Kok1-0/+7
e1000: Fix suspend/resume powerup and irq allocation From: Auke Kok <auke-jan.h.kok@intel.com> After 7.0.33/2.6.16, e1000 suspend/resume left the user with an enabled device showing garbled statistics and undetermined irq allocation state, where `ifconfig eth0 down` would display `trying to free already freed irq`. Explicitly free and allocate irq as well as powerup the PHY during resume fixes when needed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-07[PATCH] b44: change comment about irq mask registerJohannes Berg1-2/+3
Through some experimentation with the similarly built bcm43xx I came to the conclusion that if the hw/firmware sets a bit in the interrupt register, an interrupt will only be raised if that bit is included in the interrupt mask. Hence, the interrupt mask is more like an interrupt control mask. This patch changes the comment to reflect that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06Merge branch 'upstream-fixes' of ↵Jeff Garzik4-4/+29
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-11-06[PATCH] Kconfig: remove redundant NETDEVICES dependsRandy Dunlap1-2/+2
drivers/net/Kconfig says: # All the following symbols are dependent on NETDEVICES - do not repeat # that for each of the symbols. so remove duplicate 'depends' uses of NETDEVICES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: 64K page support fixThomas Klein5-23/+26
This patch fixes 64k page support by using PAGE_MASK and appropriate pagesize defines in several places. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: Removed redundant defineThomas Klein1-4/+1
Removed define H_CB_ALIGNMENT which is already defined in include/asm-powerpc/hvcall.h Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: Nullpointer dereferencation fixThomas Klein1-2/+2
Fix: Must check for nullpointer before dereferencing it - not afterwards. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-05[TG3]: Fix 2nd ifup failure on 5752M.Michael Chan1-4/+4
This fixes a bug reported in: http://bugzilla.kernel.org/show_bug.cgi?id=7438 tg3_close() turns off the PHY if WoL and ASF are both disabled. On the next tg3_open(), some devices such as the 5752M will not be brought up correctly without a PHY reset early in the reset sequence. The PHY clock is needed for some internal MAC blocks to function correctly. This problem is fixed by always resetting the PHY early in tg3_reset_hw() when it is called from tg3_open() or tg3_resume(). tg3_setup_phy() can then be called later in the sequence without the reset_phy parameter set to 1, since the PHY reset is already done. Update version to 3.68. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-31[PATCH] bcm43xx: fix unexpected LED control values in BCM4303 spromLarry Finger2-1/+12
The bcm43xx driver uses 4 locations in the devices sprom to determine the behavior of the leds. Certain defaults are assigned if all bits are set in those locations. On at least one BCM4303 chip, the sprom contains values other than the default, which executes an assertion placed in the default case of a following switch statement. This patch makes the leds on the above mentioned interface behave correctly. In addition, it limits the number of logged messages to 20 for the case of unexpected values in the sprom locations. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] bcm43xx: Fix low-traffic netdev watchdog TX timeoutsMichael Buesch1-1/+15
This fixes a netdev watchdog timeout problem. The software needs to call netif_tx_disable before running the hardware calibration code. The problem condition can be shown by the following timegraph. |---5secs - ~10 jiffies time---|---|OOPS ^ ^ last real TX periodic work stops netif At OOPS, the following happens: The watchdog timer triggers, because the timeout of 5secs is over. The watchdog first checks for stopped TX. _Usually_ TX is only stopped from the TX handler to indicate a full TX queue. But this is different. We need to stop TX here, regardless of the TX queue state. So the watchdog recognizes the stopped device and assumes it is stopped due to full TX queues (Which is a _wrong_ assumption in this case). It then tests how far the last TX has been in the past. If it's more than 5secs (which is the case for low or no traffic), it will fire a TX timeout. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] hostap_plx: fix CIS verificationPavel Roskin1-2/+2
The length of the manfid CIS should be at least 4, and it's normally 4. It's incorrect to require it to be at least 5. This breaks support for most (if not all) cards. The right place to ensure that we don't access beyond the CIS buffer is to strengthen another check. Make sure that the next tuple begins at least at the CIS buffer end (in which case we stop processing) or before that. Reported by ph35sm@free.fr Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] sky2: netpoll on dual port cardsStephen Hemminger1-1/+5
The sky2 driver uses a single NAPI poll routine for both ports on dual ported cards (because there is a single IRQ and status ring). Netpoll makes assumptions about the relationship between network device and NAPI that aren't correct on the second port, this will cause the port to never clear work. Most systems, just have single port, so not a big issue. The easy fix is just make the second port, not netpoll capable. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] skge, sky2, et all. gplv2 onlyStephen Hemminger3-6/+3
I don't want my code to downgraded to GPLv3 because of cut-n-pasted the comments. These files which I hold copyright on were started before it was clear what GPLv3 was going to be. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] net s2io: return on NULL dev_alloc_skb()David Rientjes1-1/+10
Checks for NULL dev_alloc_skb() and returns on true to avoid subsequent dereference. Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Christoph Hellwig <hch@infrared.org> Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ehea: kzalloc GFP_ATOMIC fixJan-Bernd Themann1-6/+5
This patch fixes kzalloc parameters (GFP_ATOMIC instead of GFP_KERNEL) Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] myri10ge: ServerWorks HT2000 PCI id is already defined in pci_ids.hBrice Goglin1-1/+0
No need to keep defining PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE in the driver code since it is now defined in pci_ids.h. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] sky2: not experimentalStephen Hemminger1-3/+3
The sky2 driver is no longer in experimental state. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] n2: fix confusing error codeAkinobu Mita1-3/+3
modprobe n2 with no parameters or no such devices will get confusing error message. # modprobe n2 ... Kernel does not have module support This patch replaces return code from -ENOSYS to -EINVAL. Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> drivers/net/wan/n2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] tokenring: fix module_init error handlingAkinobu Mita2-4/+14
- Call platform_driver_unregister() before return when no cards found. (fixes data corruption when no cards found) - Check platform_device_register_simple() return value Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mike Phillips <mikep@linuxtr.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> drivers/net/tokenring/proteon.c | 9 +++++++-- drivers/net/tokenring/skisa.c | 9 +++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ep93xx_eth: don't report RX errorsLennert Buytenhek1-3/+0
Flooding the console with error messages for every RX FIFO overrun, checksum error and framing error isn't very sensible. Each of these errors can occur during normal operation, so stop printk'ing error messages for RX errors at all. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ep93xx_eth: fix unlikely(x) > y testLennert Buytenhek1-1/+1
Fix unlikely(x) > y test in ep93xx_eth. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ep93xx_eth: fix RX/TXstatus ring full handlingLennert Buytenhek1-26/+9
Ray Lehtiniemi reported that an incoming UDP packet flood can lock up the ep93xx ethernet driver. Herbert Valerio Riedel noted that due to the way ep93xx_eth manages the RX/TXstatus rings, it cannot distinguish a full ring from an empty one, and correctly suggested that this was likely to be causing this lockup to occur. Instead of looking at the hardware's RX/TXstatus ring write pointers to determine when to stop reading from those rings, we should just check every individual RX/TXstatus descriptor's valid bit instead, since there is no other way to distinguish an empty ring from a full ring, and if there is a descriptor waiting, we take the hit of reading the descriptor from memory anyway. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[MIPS] Sort out missuse of __init for prom_getcmdline()Ralf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[NET] sealevel: uses arp_broken_opsRandy Dunlap1-1/+1
On Wed, 25 Oct 2006 18:03:13 +0200 Toralf Förster wrote: > WARNING: "arp_broken_ops" [drivers/net/wan/sealevel.ko] undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > > Here's the config: ... > # CONFIG_INET is not set > CONFIG_SEALEVEL_4021=m Sealevel uses arp_broken_ops so it needs to depend on INET. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-29Revert "r8169: mac address change support"Linus Torvalds1-38/+0
This reverts commit a2b98a697fa4e7564f78905b83db122824916cf9. As per Guennadi Liakhovetski, the mac address change support code breaks some normal uses (_without_ any address changes), and until it's all sorted out, we're better off without it. Says Francois: "Go revert it. Despite what I claimed, I can not find a third-party confirmation by email that it works elsewhere. It would probably be enough to remove the call to __rtl8169_set_mac_addr() in rtl8169_hw_start() though." See also http://bugzilla.kernel.org/show_bug.cgi?id=6032 Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds1-0/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] PCMCIA: fix __must_check warnings [PATCH] PCMCIA: handle sysfs, PCI errors [PATCH] Export soc_common_drv_pcmcia_remove to allow modular PCMCIA. [PATCH] ioremap balanced with iounmap for drivers/pcmcia [PATCH] pcmcia: au1000_generic fix [PATCH] i82092: wire up errors from pci_register_driver() [PATCH] CONFIG_PM=n slim: drivers/pcmcia/* [PATCH] pcmcia/ds: driver layer error checking [PATCH] pcmcia: update alloc_io_space for conflict checking for multifunction PC card [PATCH] pcmcia: add more IDs to hostap_cs.c [PATCH] pcmcia: at91_cf update
2006-10-25Merge branch 'upstream-fixes' of ↵Jeff Garzik4-19/+42
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-10-25Merge master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+1
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] users: Select ECB/CBC where needed
2006-10-25[PATCH] pcmcia: add more IDs to hostap_cs.cDominik Brodowski1-0/+7
As a replacement for the broad manufactor/card ID match we commented out because of conflicts with pcnet_cs, add two product ID matches. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25[CRYPTO] users: Select ECB/CBC where neededPatrick McHardy1-0/+1
CRYPTO_MANAGER is selected automatically by CONFIG_ECB and CONFIG_CBC. config CRYPTO_ECB tristate "ECB support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER I've added CONFIG_ECB to the ones you mentioned and CONFIG_CBC to gssapi. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-24[PATCH] missing include of dma-mapping.hAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-24e100: account for closed interface when shutting downAuke Kok1-2/+8
Account for the interface being closed before disabling polling on a device, to fix shutdown on some systems that explcitly close the netdevice before calling shutdown. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: Increment version to 7.2.9-k4Auke Kok1-1/+1
Significant fixes -> increment driver version. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: move length adjustment due to crc stripping disabled.Jesse Brandeburg1-3/+4
Move the length (rx_bytes counter) adjustment of 4 bytes down to after the TBI_ACCEPT workaround. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: Don't limit descriptor size to 4kb for PCI-E adaptersJesse Brandeburg1-0/+5
82571 and newer chispets don't need to limit desc. length to 4kb and can handle 8kb sizes. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: Disable Packet Split for non jumbo framesJesse Brandeburg1-2/+4
Allocations using alloc_page are taking too long for normal MTU, so use LPE only for jumbo frames. Signed-off-bu: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: fix wrong txdctl threshold bitmasksBruce Allan1-3/+3
Threshold bitmasks for prefetch, host and writeback were clearing bits that they were not supposed to. The leftmost 2 bits in the byte for each threshold are reserved. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: 82542 doesn't support WoLAuke Kok1-0/+1
Exclude 82542 when setting up WoL. This card does not do WoL at all. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: don't poke at manageability registers for incompatible adaptersJesse Brandeburg2-8/+16
The MANC register should not be read for PCI-E adapters at all, as well as 82543 and older where 82543 would master abort when this register was accessed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 06:14:13 +0000