summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-04-28net: hso: register netdev later to avoid a race conditionAndreas Kemnade1-7/+7
If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removalPaolo Abeni1-1/+1
On slave list updates, the bonding driver computes its hard_header_len as the maximum of all enslaved devices's hard_header_len. If the slave list is empty, e.g. on last enslaved device removal, ETH_HLEN is used. Since the bonding header_ops are set only when the first enslaved device is attached, the above can lead to header_ops->create() being called with the wrong skb headroom in place. If bond0 is configured on top of ipoib devices, with the following commands: ifup bond0 for slave in $BOND_SLAVES_LIST; do ip link set dev $slave nomaster done ping -c 1 <ip on bond0 subnet> we will obtain a skb_under_panic() with a similar call trace: skb_push+0x3d/0x40 push_pseudo_header+0x17/0x30 [ib_ipoib] ipoib_hard_header+0x4e/0x80 [ib_ipoib] arp_create+0x12f/0x220 arp_send_dst.part.19+0x28/0x50 arp_solicit+0x115/0x290 neigh_probe+0x4d/0x70 __neigh_event_send+0xa7/0x230 neigh_resolve_output+0x12e/0x1c0 ip_finish_output2+0x14b/0x390 ip_finish_output+0x136/0x1e0 ip_output+0x76/0xe0 ip_local_out+0x35/0x40 ip_send_skb+0x19/0x40 ip_push_pending_frames+0x33/0x40 raw_sendmsg+0x7d3/0xb50 inet_sendmsg+0x31/0xb0 sock_sendmsg+0x38/0x50 SYSC_sendto+0x102/0x190 SyS_sendto+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 This change addresses the issue avoiding updating the bonding device hard_header_len when the slaves list become empty, forbidding to shrink it below the value used by header_ops->create(). The bug is there since commit 54ef31371407 ("[PATCH] bonding: Handle large hard_header_len") but the panic can be triggered only since commit fc791b633515 ("IB/ipoib: move back IB LL address into the hard header"). Reported-by: Norbert P <noe@physik.uzh.ch> Fixes: 54ef31371407 ("[PATCH] bonding: Handle large hard_header_len") Fixes: fc791b633515 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28cpsw/netcp: refine cpts dependencyArnd Bergmann1-1/+3
Tony Lindgren reports a kernel oops that resulted from my compile-time fix on the default config. This shows two problems: a) configurations that did not already enable PTP_1588_CLOCK will now miss the cpts driver b) when cpts support is disabled, the driver crashes. This is a preexisting problem that we did not notice before my patch. While the second problem is still being investigated, this modifies the dependencies again, getting us back to the original state, with another 'select NET_PTP_CLASSIFY' added in to avoid the original link error we got, and the 'depends on POSIX_TIMERS' to hide the CPTS support when turning it on would be useless. Cc: stable@vger.kernel.org # 4.11 needs this Fixes: 07fef3623407 ("cpsw/netcp: cpts depends on posix_timers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26macsec: dynamically allocate space for sglistJason A. Donenfeld1-7/+22
We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Revert "phy: micrel: Disable auto negotiation on startup"David S. Miller1-11/+0
This reverts commit 99f81afc139c6edd14d77a91ee91685a414a1c66. It was papering over the real problem, which is fixed by commit f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26net: phy: fix auto-negotiation stall due to unavailable interruptAlexander Kochetkov1-4/+36
The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by: Roger Quadros <rogerq@ti.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: Fix error in the dcbx app meta data initialization.sudarsana.kalluru@cavium.com1-5/+5
DCBX app_data array is initialized with the incorrect values for personality field. This would prevent offloaded protocols from honoring the PFC. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25netvsc: fix calculation of available send sectionsstephen hemminger2-6/+4
My change (introduced in 4.11) to use find_first_clear_bit incorrectly assumed that the size argument was words, not bits. The effect was only a small limited number of the available send sections were being actually used. This can cause performance loss with some workloads. Since map_words is now used only during initialization, it can be on stack instead of in per-device data. Fixes: b58a185801da ("netvsc: simplify get next send section") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: hso: fix module unloadingAndreas Kemnade1-1/+1
keep tty driver until usb driver is unregistered rmmod hso produces traces like this without that: [40261.645904] usb 2-2: new high-speed USB device number 2 using ehci-omap [40261.854644] usb 2-2: New USB device found, idVendor=0af0, idProduct=8800 [40261.862609] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [40261.872772] usb 2-2: Product: Globetrotter HSUPA Modem [40261.880279] usb 2-2: Manufacturer: Option N.V. [40262.021270] hso 2-2:1.5: Not our interface [40265.556945] hso: unloaded [40265.559875] usbcore: deregistering interface driver hso [40265.595947] Unable to handle kernel NULL pointer dereference at virtual address 00000033 [40265.604522] pgd = ecb14000 [40265.611877] [00000033] *pgd=00000000 [40265.617034] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [40265.622650] Modules linked in: hso(-) bnep bluetooth ipv6 arc4 twl4030_madc_hwmon wl18xx wlcore mac80211 cfg80211 snd_soc_simple_card snd_soc_simple_card_utils snd_soc_omap_twl4030 snd_soc_gtm601 generic_adc_battery extcon_gpio omap3_isp videobuf2_dma_contig videobuf2_memops wlcore_sdio videobuf2_v4l2 videobuf2_core ov9650 bmp280_i2c v4l2_common bmp280 bmg160_i2c bmg160_core at24 nvmem_core videodev bmc150_accel_i2c bmc150_magn_i2c media bmc150_accel_core tsc2007 bmc150_magn leds_tca6507 bno055 snd_soc_omap_mcbsp industrialio_triggered_buffer snd_soc_omap kfifo_buf snd_pcm_dmaengine gpio_twl4030 snd_soc_twl4030 twl4030_vibra twl4030_madc wwan_on_off ehci_omap pwm_bl pwm_omap_dmtimer panel_tpo_td028ttec1 encoder_opa362 connector_analog_tv omapdrm drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect [40265.698211] sysimgblt fb_sys_fops cfbcopyarea drm omapdss usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap2430 phy_twl4030_usb musb_hdrc twl4030_charger industrialio w2sg0004 twl4030_pwrbutton bq27xxx_battery w1_bq27000 omap_hdq [last unloaded: hso] [40265.723175] CPU: 0 PID: 2701 Comm: rmmod Not tainted 4.11.0-rc6-letux+ #6 [40265.730346] Hardware name: Generic OMAP36xx (Flattened Device Tree) [40265.736938] task: ecb81100 task.stack: ecb82000 [40265.741729] PC is at cdev_del+0xc/0x2c [40265.745666] LR is at tty_unregister_device+0x40/0x50 [40265.750915] pc : [<c027472c>] lr : [<c04b3ecc>] psr: 600b0113 sp : ecb83ea8 ip : eca4f898 fp : 00000000 [40265.763000] r10: 00000000 r9 : 00000000 r8 : 00000001 [40265.768493] r7 : eca4f800 r6 : 00000003 r5 : 00000000 r4 : ffffffff [40265.775360] r3 : c1458d54 r2 : 00000000 r1 : 00000004 r0 : ffffffff [40265.782257] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [40265.789764] Control: 10c5387d Table: acb14019 DAC: 00000051 [40265.795806] Process rmmod (pid: 2701, stack limit = 0xecb82218) [40265.802062] Stack: (0xecb83ea8 to 0xecb84000) [40265.806640] 3ea0: ec9e8100 c04b3ecc bf737378 ed5b7c00 00000003 bf7327ec [40265.815277] 3ec0: eca4f800 00000000 ec9fd800 eca4f800 bf737070 bf7328bc eca4f820 c05a9a04 [40265.823883] 3ee0: eca4f820 00000000 00000001 eca4f820 ec9fd870 bf737070 eca4f854 ec9fd8a4 [40265.832519] 3f00: ecb82000 00000000 00000000 c04e6960 eca4f820 bf737070 bf737048 00000081 [40265.841125] 3f20: c01071e4 c04e6a60 ecb81100 bf737070 bf737070 c04e5d94 bf737020 c05a8f88 [40265.849731] 3f40: bf737100 00000800 7f5fa254 00000081 c01071e4 c01c4afc 00000000 006f7368 [40265.858367] 3f60: ecb815f4 00000000 c0cac9c4 c01071e4 ecb82000 00000000 00000000 c01512f4 [40265.866973] 3f80: ed5b3200 c01071e4 7f5fa220 7f5fa220 bea78ec9 0010711c 7f5fa220 7f5fa220 [40265.875579] 3fa0: bea78ec9 c0107040 7f5fa220 7f5fa220 7f5fa254 00000800 dd35b800 dd35b800 [40265.884216] 3fc0: 7f5fa220 7f5fa220 bea78ec9 00000081 bea78dcc 00000000 bea78bd8 00000000 [40265.892822] 3fe0: b6f70521 bea78b6c 7f5dd613 b6f70526 80070030 7f5fa254 ffffffff ffffffff [40265.901458] [<c027472c>] (cdev_del) from [<c04b3ecc>] (tty_unregister_device+0x40/0x50) [40265.909942] [<c04b3ecc>] (tty_unregister_device) from [<bf7327ec>] (hso_free_interface+0x80/0x144 [hso]) [40265.919982] [<bf7327ec>] (hso_free_interface [hso]) from [<bf7328bc>] (hso_disconnect+0xc/0x18 [hso]) [40265.929718] [<bf7328bc>] (hso_disconnect [hso]) from [<c05a9a04>] (usb_unbind_interface+0x84/0x200) [40265.939239] [<c05a9a04>] (usb_unbind_interface) from [<c04e6960>] (device_release_driver_internal+0x138/0x1cc) [40265.949798] [<c04e6960>] (device_release_driver_internal) from [<c04e6a60>] (driver_detach+0x60/0x6c) [40265.959503] [<c04e6a60>] (driver_detach) from [<c04e5d94>] (bus_remove_driver+0x64/0x8c) [40265.968017] [<c04e5d94>] (bus_remove_driver) from [<c05a8f88>] (usb_deregister+0x5c/0xb8) [40265.976654] [<c05a8f88>] (usb_deregister) from [<c01c4afc>] (SyS_delete_module+0x160/0x1dc) [40265.985443] [<c01c4afc>] (SyS_delete_module) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [40265.994171] Code: c1458d54 e59f3020 e92d4010 e1a04000 (e5941034) [40266.016693] ---[ end trace 9d5ac43c7e41075c ]--- Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25team: fix memory leaksPan Bian1-2/+6
In functions team_nl_send_port_list_get() and team_nl_send_options_get(), pointer skb keeps the return value of nlmsg_new(). When the call to genlmsg_put() fails, the memory is not freed(). This will result in memory leak bugs. Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers") Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge tag 'linux-can-fixes-for-4.11-20170425' of ↵David S. Miller5-5/+90
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-04-25 this is a pull request of three patches for net/master. There are two patches by Stephane Grosjean for that add a new variant to the PCAN-Chip USB driver. The other patch is by Maksim Salau, which swtiches the memory for USB transfers from heap to stack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25sfc: tx ring can only have 2048 entries for all EF10 NICsBert Kenward2-1/+5
Fixes: dd248f1bc65b ("sfc: Add PCI ID for Solarflare 8000 series 10/40G NIC") Reported-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25macvlan: Fix device ref leak when purging bc_queueHerbert Xu1-1/+10
When a parent macvlan device is destroyed we end up purging its broadcast queue without dropping the device reference count on the packet source device. This causes the source device to linger. This patch drops that reference count. Fixes: 260916dfb48c ("macvlan: Fix potential use-after free for...") Reported-by: Joe Ghalam <Joe.Ghalam@dell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25usb: plusb: Add support for PL-27A1Roman Spychała2-3/+14
This patch adds support for the PL-27A1 by adding the appropriate USB ID's. This chip is used in the goobay Active USB 3.0 Data Link and Unitek Y-3501 cables. Signed-off-by: Roman Spychała <roed@onet.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: can: usb: gs_usb: Fix buffer on stackMaksim Salau1-5/+12
Allocate buffers on HEAP instead of STACK for local structures that are to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.8 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: usb: Kconfig: Add PCAN-USB X6 device in help textStephane Grosjean1-0/+1
This patch adds a text line in the help section of the CAN_PEAK_USB config item describing the support of the PCAN-USB X6 adapter, which is already included in the Kernel since 4.9. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: usb: Add support of PCAN-Chip USB stamp moduleStephane Grosjean4-0/+77
This patch adds the support of the PCAN-Chip USB, a stamp module for customer hardware designs, which communicates via USB 2.0 with the hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B as well as CAN FD. The physical CAN connection is determined by external wiring. The Stamp module with its single-sided mounting and plated half-holes is suitable for automatic assembly. Note that the chip is equipped with the same logic than the PCAN-USB FD. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-24net: dsa: b53: Fix CPU port for 58xx devicesFlorian Fainelli1-1/+1
The 58xx devices (Northstar Plus) do actually have their CPU port wired at port 8, it was unfortunately set to port 5 (B53_CPU_PORT_25) which is incorrect, since that is the second possible management port. Fixes: 991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch") Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: dsa: b53: Implement software reset for 58xx devicesFlorian Fainelli2-1/+25
Implement the correct software reset sequence for 58xx devices by setting all 3 reset bits and polling for the SW_RST bit to clear itself without a given timeout. We cannot use is58xx() here because that would also include the 7445/7278 Starfighter 2 which have their own driver doing the reset earlier on due to the HW specific integration. Fixes: 991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: dsa: b53: Include IMP/CPU port in dumb forwarding modeFlorian Fainelli2-0/+14
Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need to make sure that the IMP/CPU port is included in the forwarding decision. Without this change, switching between non-management ports would work, but not between management ports and non-management ports thus breaking the default state in which DSA switch are brought up. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge tag 'mlx5-fixes-2017-04-22' of ↵David S. Miller6-53/+76
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-04-22 This series contains some mlx5 fixes for net. For your convenience, the series doesn't introduce any conflict with the ongoing net-next pull request. Please pull and let me know if there's any problem. For -stable: ("net/mlx5: E-Switch, Correctly deal with inline mode on ConnectX-5") kernels >= 4.10 ("net/mlx5e: Fix ETHTOOL_GRXCLSRLALL handling") kernels >= 4.8 ("net/mlx5e: Fix small packet threshold") kernels >= 4.7 ("net/mlx5: Fix driver load bad flow when having fw initializing timeout") kernels >= 4.4 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24ravb: Double free on error in ravb_start_xmit()Dan Carpenter1-3/+4
If skb_put_padto() fails then it frees the skb. I shifted that code up a bit to make my error handling a little simpler. Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24macsec: avoid heap overflow in skb_to_sgvecJason A. Donenfeld1-1/+1
While this may appear as a humdrum one line change, it's actually quite important. An sk_buff stores data in three places: 1. A linear chunk of allocated memory in skb->data. This is the easiest one to work with, but it precludes using scatterdata since the memory must be linear. 2. The array skb_shinfo(skb)->frags, which is of maximum length MAX_SKB_FRAGS. This is nice for scattergather, since these fragments can point to different pages. 3. skb_shinfo(skb)->frag_list, which is a pointer to another sk_buff, which in turn can have data in either (1) or (2). The first two are rather easy to deal with, since they're of a fixed maximum length, while the third one is not, since there can be potentially limitless chains of fragments. Fortunately dealing with frag_list is opt-in for drivers, so drivers don't actually have to deal with this mess. For whatever reason, macsec decided it wanted pain, and so it explicitly specified NETIF_F_FRAGLIST. Because dealing with (1), (2), and (3) is insane, most users of sk_buff doing any sort of crypto or paging operation calls a convenient function called skb_to_sgvec (which happens to be recursive if (3) is in use!). This takes a sk_buff as input, and writes into its output pointer an array of scattergather list items. Sometimes people like to declare a fixed size scattergather list on the stack; othertimes people like to allocate a fixed size scattergather list on the heap. However, if you're doing it in a fixed-size fashion, you really shouldn't be using NETIF_F_FRAGLIST too (unless you're also ensuring the sk_buff and its frag_list children arent't shared and then you check the number of fragments in total required.) Macsec specifically does this: size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1); tmp = kmalloc(size, GFP_ATOMIC); *sg = (struct scatterlist *)(tmp + sg_offset); ... sg_init_table(sg, MAX_SKB_FRAGS + 1); skb_to_sgvec(skb, sg, 0, skb->len); Specifying MAX_SKB_FRAGS + 1 is the right answer usually, but not if you're using NETIF_F_FRAGLIST, in which case the call to skb_to_sgvec will overflow the heap, and disaster ensues. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: stable@vger.kernel.org Cc: security@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: tc35815: move free after the dereferenceDan Carpenter1-1/+1
We dereference "skb" to get "skb->len" so we should probably do that step before freeing the skb. Fixes: eea221ce4880 ("tc35815 driver update (take 2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net/mlx5e: Fix race in mlx5e_sw_stats and mlx5e_vport_statsMartin KaFai Lau1-2/+2
We have observed a sudden spike in rx/tx_packets and rx/tx_bytes reported under /proc/net/dev. There is a race in mlx5e_update_stats() and some of the get-stats functions (the one that we hit is the mlx5e_get_stats() which is called by ndo_get_stats64()). In particular, the very first thing mlx5e_update_sw_counters() does is 'memset(s, 0, sizeof(*s))'. For example, if mlx5e_get_stats() is unlucky at one point, rx_bytes and rx_packets could be 0. One second later, a normal (and much bigger than 0) value will be reported. This patch is to use a 'struct mlx5e_sw_stats temp' to avoid a direct memset zero on priv->stats.sw. mlx5e_update_vport_counters() has a similar race. Hence, addressed together. However, memset zero is removed instead because it is not needed. I am lucky enough to catch this 0-reset in rx multicast: eth0: 41457665 76804 70 0 0 70 0 47085 15586634 87502 3 0 0 0 3 0 eth0: 41459860 76815 70 0 0 70 0 47094 15588376 87516 3 0 0 0 3 0 eth0: 41460577 76822 70 0 0 70 0 0 15589083 87521 3 0 0 0 3 0 eth0: 41463293 76838 70 0 0 70 0 47108 15595872 87538 3 0 0 0 3 0 eth0: 41463379 76839 70 0 0 70 0 47116 15596138 87539 3 0 0 0 3 0 v2: Remove memset zero from mlx5e_update_vport_counters() v1: Use temp and memcpy Fixes: 9218b44dcc05 ("net/mlx5e: Statistics handling refactoring") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22net/mlx5e: Fix ETHTOOL_GRXCLSRLALL handlingIlan Tayari1-0/+1
Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size of the table, regardless of the amount of entries in it. Existing code does not do that, and this breaks all usage of ethtool -N or -n without explicit location, with this error: rmgr: Invalid RX class rules table size: Success Set info->data to the table size. Tested: ethtool -n ens8 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55 ethtool -n ens8 ethtool -N ens8 delete 1023 ethtool -N ens8 delete 55 Fixes: f913a72aa008 ("net/mlx5e: Add support to get ethtool flow rules") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5e: Fix small packet thresholdEugenia Emantayev1-1/+1
RX packet headers are meant to be contained in SKB linear part, and chose a threshold of 128. It turns out this is not enough, i.e. for IPv6 packet over VxLAN. In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes, and 86 bytes for TCP/IPv6. In total 136 bytes that is more than current 128 bytes. In this case expand header flow is reached. The warning in skb_try_coalesce() caused by a wrong truesize was already fixed here: commit 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()"). Still, we prefer to totally avoid the expand header flow for performance reasons. Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: Fix UAR memory leakMaor Gottlieb1-0/+1
When UAR is released, we deallocate the device resource, but don't unmmap the UAR mapping memory. Fix the leak by unmapping this memory. Fixes: a6d51b68611e9 ('net/mlx5: Introduce blue flame register allocator) Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5e: Make sure the FW max encap size is enough for ipv6 tunnelsOr Gerlitz1-19/+23
Otherwise the code that fills the ipv6 encapsulation headers could be writing beyond the allocated headers buffer. Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5e: Make sure the FW max encap size is enough for ipv4 tunnelsOr Gerlitz1-19/+23
Otherwise the code that fills the ipv4 encapsulation headers could be writing beyond the allocated headers buffer. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: E-Switch, Correctly deal with inline mode on ConnectX-5Or Gerlitz2-13/+26
On ConnectX5 the wqe inline mode is "none" and hence the FW reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED. Fix our devlink callbacks to deal with that on get and set. Also fix the tc flow parsing code not to fail anything when inline isn't required. Fixes: bffaa916588e ('net/mlx5: E-Switch, Add control for inline mode') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: Fix driver load bad flow when having fw initializing timeoutMohamad Haj Yahia1-1/+1
If FW is stuck in initializing state we will skip the driver load, but current error handling flow doesn't clean previously allocated command interface resources. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-21kaweth: use skb_cow_head() to deal with cloned skbsEric Dumazet1-12/+6
We can use skb_cow_head() to properly deal with clones, especially the ones coming from TCP stack that allow their head being modified. This avoids a copy. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ch9200: use skb_cow_head() to deal with cloned skbsEric Dumazet1-7/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 4a476bd6d1d9 ("usbnet: New driver for QinHeng CH9200 devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21lan78xx: use skb_cow_head() to deal with cloned skbsEric Dumazet1-7/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21sr9700: use skb_cow_head() to deal with cloned skbsEric Dumazet1-7/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21cx82310_eth: use skb_cow_head() to deal with cloned skbsEric Dumazet1-5/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: cc28a20e77b2 ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21smsc75xx: use skb_cow_head() to deal with cloned skbsEric Dumazet1-6/+2
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix issue in populating the PFC config paramters.sudarsana.kalluru@cavium.com1-0/+2
Change ieee_setpfc() callback implementation to populate traffic class count with the user provided value. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix possible system hang in the dcbnl-getdcbx() path.sudarsana.kalluru@cavium.com1-1/+1
qed_dcbnl_get_dcbx() API uses kmalloc in GFT_KERNEL mode. The API gets invoked in the interrupt context by qed_dcbnl_getdcbx callback. Need to invoke this kmalloc in atomic mode. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix sending an invalid PFC error mask to MFW.sudarsana.kalluru@cavium.com1-0/+2
PFC error-mask value is not supported by MFW, but this bit could be set in the pfc bit-map of the operational parameters if remote device supports it. These operational parameters are used as basis for populating the dcbx config parameters. User provided configs will be applied on top of these parameters and then send them to MFW when requested. Driver need to clear the error-mask bit before sending the config parameters to MFW. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20qed: Fix possible error in populating max_tc field.sudarsana.kalluru@cavium.com1-0/+7
Some adapters may not publish the max_tc value. Populate the default value for max_tc field in case the mfw didn't provide one. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20smsc95xx: Use skb_cow_head to deal with cloned skbsJames Hughes1-6/+6
The driver was failing to check that the SKB wasn't cloned before adding checksum data. Replace existing handling to extend/copy the header buffer with skb_cow_head. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20dp83640: don't recieve time stamps twiceDan Carpenter1-2/+0
This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258ab93 ("dp83640: Delay scheduled work.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18sh_eth: unmap DMA buffers when freeing ringsSergei Shtylyov1-55/+67
The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: ethernet: mediatek: fix inconsistency of port number carried in TXDSean Wang2-8/+18
Fix port inconsistency on TXD due to hardware BUG that would cause different port number is carried on the same TXD between tx_map() and tx_unmap() with the iperf test. It would cause confusing BQL logic which leads to kernel panic when dual GMAC runs concurrently. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: ethernet: mediatek: fix inconsistency between TXD and the used bufferSean Wang1-9/+8
Fix inconsistency between the TXD descriptor and the used buffer that would cause unexpected logic at mtk_tx_unmap() during skb housekeeping. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: micrel: fix crash when statistic requested for KSZ9031 phyGrygorii Strashko1-15/+2
Now the command: ethtool --phy-statistics eth0 will cause system crash with meassage "Unable to handle kernel NULL pointer dereference at virtual address 00000010" from: (kszphy_get_stats) from [<c069f1d8>] (ethtool_get_phy_stats+0xd8/0x210) (ethtool_get_phy_stats) from [<c06a0738>] (dev_ethtool+0x5b8/0x228c) (dev_ethtool) from [<c06b5484>] (dev_ioctl+0x3fc/0x964) (dev_ioctl) from [<c0679f7c>] (sock_ioctl+0x170/0x2c0) (sock_ioctl) from [<c02419d4>] (do_vfs_ioctl+0xa8/0x95c) (do_vfs_ioctl) from [<c02422c4>] (SyS_ioctl+0x3c/0x64) (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x44) The reason: phy_driver structure for KSZ9031 phy has no .probe() callback defined. As result, struct phy_device *phydev->priv pointer will not be initializes (null). This issue will affect also following phys: KSZ8795, KSZ886X, KSZ8873MLL, KSZ9031, KSZ9021, KSZ8061, KS8737 Fix it by: - adding .probe() = kszphy_probe() callback to KSZ9031, KSZ9021 phys. The kszphy_probe() can be re-used as it doesn't do any phy specific settings. - removing statistic callbacks from other phys (KSZ8795, KSZ886X, KSZ8873MLL, KSZ8061, KS8737) as they doesn't have corresponding statistic counters. Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: vrf: Fix setting NLM_F_EXCL flag when adding l3mdev ruleDavid Ahern1-1/+1
Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: thunderx: Fix set_max_bgx_per_node for 81xx rgxGeorge Cherian2-0/+2
Add the PCI_SUBSYS_DEVID_81XX_RGX and use the same to set the max bgx per node count. This fixes the issue intoduced by following commit 78aacb6f6 net: thunderx: Fix invalid mac addresses for node1 interfaces With this commit the max_bgx_per_node for 81xx is set as 2 instead of 3 because of which num_vfs is always calculated as zero. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-09 21:03:23 +0000