summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds22-58/+128
1) ICMP sockets leave err uninitialized but we try to return it for the unsupported MSG_OOB case, reported by Dave Jones. 2) Add new Zaurus device ID entries, from Dave Jones. 3) Pointer calculation in hso driver memset is wrong, from Dan Carpenter. 4) ks8851_probe() checks unsigned value as negative, fix also from Dan Carpenter. 5) Fix crashes in atl1c driver due to TX queue handling, from Eric Dumazet. I anticipate some TX side locking fixes coming in the near future for this driver as well. 6) The inline directive fix in Bluetooth which was breaking the build only with very new versions of GCC, from Johan Hedberg. 7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge window, reported by Meelis Roos and fixed by Eric Dumazet. 8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng. 9) Some ip6_route_output() callers test the return value for NULL, but this never happens as the convention is to return a dst entry with dst->error set. Fixes from RonQing Li. 10) Logitech Harmony 900 should be handled by zaurus driver not cdc_ether, update white lists and black lists accordingly. From Scott Talbert. 11) Receiving from certain kinds of devices there won't be a MAC header, so there is no MAC header to fixup in the IPSEC code, and if we try to do it we'll crash. Fix from Eric Dumazet. 12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny Petrilin. 13) Fix regression in link-down handling in davinci_emac which causes all RX descriptors to be freed up and therefore RX to wedge completely, from Christian Riesch. 14) It took two attempts, but ctnetlink soft lockups seem to be cured now, from Pablo Neira Ayuso. 15) Endianness bug fix in ENIC driver, from Santosh Nayak. 16) The long ago conversion of the PPP fragmentation code over to abstracted SKB list handling wasn't perfect, once we get an out of sequence SKB we don't flush the rest of them like we should. From Ben McKeegan. 17) Fix regression of ->ip_summed initialization in sfc driver. From Ben Hutchings. 18) Bluetooth timeout mistakenly using msecs instead of jiffies, from Andrzej Kaczmarek. 19) Using _sync variant of work cancellation results in deadlocks, use the non _sync variants instead. From Andre Guedes. 20) Bluetooth rfcomm code had reference counting problems leading to crashes, fix from Octavian Purdila. 21) The conversion of netem over to classful qdisc handling added two bugs to netem_dequeue(), fixes from Eric Dumazet. 22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall. 23) b44_pci_exit() should not have __exit tag since it's invoked from non-__exit code. From Nikola Pajkovsky. 24) The conversion of the neighbour hash tables over to RCU added a race, fixed here by adding the necessary reread of tbl->nht, fix from Michel Machado. 25) When we added VF (virtual function) attributes for network device dumps, this potentially bloats up the size of the dump of one network device such that the dump size is too large for the buffer allocated by properly written netlink applications. In particular, if you add 255 VFs to a network device, parts of GLIBC stop working. To fix this, we add an attribute that is used to turn on these extended portions of the network device dump. Sophisticaed applications like 'ip' that want to see this stuff will be changed to set the attribute, whereas things like GLIBC that don't care about VFs simply will not, and therefore won't be busted by the mere presence of VFs on a network device. Thanks to the tireless work of Greg Rose on this fix. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) sfc: Fix assignment of ip_summed for pre-allocated skbs ppp: fix 'ppp_mp_reconstruct bad seq' errors enic: Fix endianness bug. gre: fix spelling in comments netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2) Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries" davinci_emac: Do not free all rx dma descriptors during init mlx4_core: Fixing array indexes when setting port types phy: IC+101G and PHY_HAS_INTERRUPT flag netdev/phy/icplus: Correct broken phy_init code ipsec: be careful of non existing mac headers Move Logitech Harmony 900 from cdc_ether to zaurus hso: memsetting wrong data in hso_get_count() netfilter: ip6_route_output() never returns NULL. ethernet/broadcom: ip6_route_output() never returns NULL. ipv6: ip6_route_output() never returns NULL. jme: Fix FIFO flush issue atm: clip: remove clip_tbl ipv4: ping: Fix recvmsg MSG_OOB error handling. rtnetlink: Fix problem with buffer allocation ...
2012-02-24Merge tag 'rdma-for-linus' of ↵Linus Torvalds2-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband One InfiniBand/RDMA regression fix for 3.3: - mlx4 SR-IOV changes added static exported functions, which doesn't build on powerpc at least. Fix from Doug Ledford for this. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Exported functions can't be static
2012-02-24Merge branch 'sfc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller1-2/+2
2012-02-25sfc: Fix assignment of ip_summed for pre-allocated skbsBen Hutchings1-2/+2
When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-24ppp: fix 'ppp_mp_reconstruct bad seq' errorsBen McKeegan1-0/+23
This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24enic: Fix endianness bug.Santosh Nayak2-2/+2
Sparse complaints the endian bug. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24davinci_emac: Do not free all rx dma descriptors during initChristian Riesch1-2/+4
This patch fixes a regression that was introduced by commit 0a5f38467765ee15478db90d81e40c269c8dda20 davinci_emac: Add Carrier Link OK check in Davinci RX Handler Said commit adds a check whether the carrier link is ok. If the link is not ok, the skb is freed and no new dma descriptor added to the rx dma channel. This causes trouble during initialization when the carrier status has not yet been updated. If a lot of packets are received while netif_carrier_ok returns false, all dma descriptors are freed and the rx dma transfer is stopped. The bug occurs when the board is connected to a network with lots of traffic and the ifconfig down/up is done, e.g., when reconfiguring the interface with DHCP. The bug can be reproduced by flood pinging the davinci board while doing ifconfig eth0 down ifconfig eth0 up on the board. After that, the rx path stops working and the overrun value reported by ifconfig is counting up. This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20 and instead issues warnings only if cpdma_chan_submit returns -ENOMEM. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: <stable@vger.kernel.org> Cc: Hegde, Vinay <vinay.hegde@ti.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24mlx4_core: Fixing array indexes when setting port typesYevgeny Petrilin1-1/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23phy: IC+101G and PHY_HAS_INTERRUPT flagGiuseppe CAVALLARO1-14/+17
This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series. Also the patch does a simple dity-up to signal that the driver actually is for IP101A LF and IP101G devices. In fact, these are two similar PHYs that have the same IDs and mainly differ for the EEE capability supported in the G series. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23netdev/phy/icplus: Correct broken phy_init codeDavid McKay1-6/+18
The code for ip1001_config_init() was totally broken if you were not using RGMII. Instead of returning an error code or zero it actually returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was also trying to set the IP1001_APS_ON bit , but never actually wrote back the register. The error checking was also incorrect in both this function and the reset function, so this patch fixes that up in a consistent fashion. Signed-off-by: David McKay <david.mckay@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22mlx4_core: Exported functions can't be staticDoug Ledford2-7/+7
At least on powerpc, it breaks the build if exported functions are static. Fix some static exported functions introduced with the mlx4 SR-IOV support added in 3.3-rc1. Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-22Move Logitech Harmony 900 from cdc_ether to zaurusScott Talbert2-0/+14
In the current kernel implementation, the Logitech Harmony 900 remote control is matched to the cdc_ether driver through the generic USB_CDC_SUBCLASS_MDLM entry. However, this device appears to be of the pseudo-MDLM (Belcarra) type, rather than the standard one. This patch blacklists the Harmony 900 from the cdc_ether driver and whitelists it for the pseudo-MDLM driver in zaurus. Signed-off-by: Scott Talbert <talbert@techie.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22hso: memsetting wrong data in hso_get_count()Dan Carpenter1-1/+1
The intent was to clear out the icount struct here, but we accidentally clear stack memory instead. It probably will lead to a NULL dereference right away. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22ethernet/broadcom: ip6_route_output() never returns NULL.RongQing.Li1-1/+5
ip6_route_output() never returns NULL, so it is wrong to check if the return value is NULL. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22jme: Fix FIFO flush issueGuo-Fu Tseng2-10/+2
Set the RX FIFO flush watermark lower. According to Federico and JMicron's reply, setting it to 16QW would be stable on most platforms. Otherwise, user might experience packet drop issue. CC: stable@kernel.org Reported-by: Federico Quagliata <federico@quagliata.org> Fixed-by: Federico Quagliata <federico@quagliata.org> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21mlx4: Setting new port types after all interfaces unregisteredYevgeny Petrilin1-3/+2
In port type change flow, need to set the new port types only after all interfaces have finished the unregister process. Otherwise, during unregister, one of the interfaces might issue a SET_PORT command with wrong port types, it can cause bad FW behavior. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21mlx4: Replacing pool_lock with mutexYevgeny Petrilin3-6/+6
Under the spinlock we call request_irq(), which allocates memory with GFP_KERNEL, This causes the following trace when DEBUG_SPINLOCK is enabled, it can cause the following trace: BUG: spinlock wrong CPU on CPU#2, ethtool/2595 lock: ffff8801f9cbc2b0, .magic: dead4ead, .owner: ethtool/2595, .owner_cpu: 0 Pid: 2595, comm: ethtool Not tainted 3.0.18 #2 Call Trace: spin_bug+0xa2/0xf0 do_raw_spin_unlock+0x71/0xa0 _raw_spin_unlock+0xe/0x10 mlx4_assign_eq+0x12b/0x190 [mlx4_core] mlx4_en_activate_cq+0x252/0x2d0 [mlx4_en] ? mlx4_en_activate_rx_rings+0x227/0x370 [mlx4_en] mlx4_en_start_port+0x189/0xb90 [mlx4_en] mlx4_en_set_ringparam+0x29a/0x340 [mlx4_en] dev_ethtool+0x816/0xb10 ? dev_get_by_name_rcu+0xa4/0xe0 dev_ioctl+0x2b5/0x470 handle_mm_fault+0x1cd/0x2d0 sock_do_ioctl+0x5d/0x70 sock_ioctl+0x79/0x2f0 do_vfs_ioctl+0x8c/0x340 sys_ioctl+0xa1/0xb0 system_call_fastpath+0x16/0x1b Replacing with mutex, which is enough in this case. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21zaurus: Add ID for C-750/C-760/C-860/SL-C3000 PDA in MDLM modeDave Jones1-0/+5
In 16adf5d07987d93675945f3cecf0e33706566005 I removed an over-broad alias that caused zaurus.ko to bind to unrelated devices. I had a report that at least one valid case no longer auto-loads because of this. This patch adds an ID for that case. Reported-by: Raphael Wimmer <raphael.wimmer@ur.de> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20mlx4_core: Do not map BF area if capability is 0Jack Morgenstein1-0/+3
BF can be disabled in some cases, the capability field, bf_reg_size is set to zero in this case. Don't map the BF area in this case, it would cause failures. In addition, leaving the BF area unmapped also alerts the ETH driver to not use BF. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20Merge branch 'master' of git://gitorious.org/linux-can/linux-canDavid S. Miller1-1/+12
2012-02-20Merge branch 'master' of ↵John W. Linville2-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-20can: sja1000: fix isr hang when hw is unplugged under loadOliver Hartkopp1-1/+12
In the case of hotplug enabled devices (PCMCIA/PCIeC) the removal of the hardware can cause an infinite loop in the common sja1000 isr. Use the already retrieved status register to indicate a possible hardware removal and double check by reading the mode register in sja1000_is_absent. Cc: stable@kernel.org [3.2+] Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-19b44: remove __exit from b44_pci_exit()Nikola Pajkovsky1-1/+1
WARNING: drivers/net/ethernet/broadcom/built-in.o(.init.text+0x5d): Section mismatch in reference from the function b44_init() to the function .exit.text:b44_pci_exit() module exits with b44_cleanup() Signed-off-by: Nikola Pajkovsky <n.pajkovsky@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19net/ethernet: ks8851_mll: signedness bug in ks8851_probe()Dan Carpenter1-1/+1
netdev->irq is unsigned, so it's never less than zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19vmxnet3: cap copy length at size of skb to prevent dropped frames on txNeil Horman1-2/+2
I was recently shown that vmxnet3 devices on transmit, will drop very small udp frames consistently. This is due to a regression introduced by commit 39d4a96fd7d2926e46151adbd18b810aeeea8ec0. This commit attempts to introduce an optimization to the tx path, indicating that the underlying hardware behaves optimally when at least 54 bytes of header data are available for direct access. This causes problems however, if the entire frame is less than 54 bytes long. The subsequent pskb_may_pull in vmxnet3_parse_and_copy_hdr fails, causing an error return code, which leads to vmxnet3_tq_xmit dropping the frame. Fix it by placing a cap on the copy length. For frames longer than 54 bytes, we do the pull as we normally would. If the frame is shorter than that, copy the whole frame, but no more. This ensures that we still get the optimization for qualifying frames, but don't do any damange for frames that are too short. Also, since I'm unable to do this, it wuold be great if vmware could follow up this patch with some additional code commentary as to why 54 bytes is an optimal pull length for a virtual NIC driver. The comment that introduced this was vague on that. Thanks! Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Max Matveev <mmatveev@redhat.com> CC: Max Matveev <mmatveev@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19atl1c: dont use highprio tx queueEric Dumazet1-4/+0
This driver attempts to use two TX rings but lacks proper support : 1) IRQ handler only takes care of TX completion on first TX ring 2) the stop/start logic uses the legacy functions (for non multiqueue drivers) This means all packets witk skb mark set to 1 are sent through high queue but are never cleaned and queue eventualy fills and block the device, triggering the infamous "NETDEV WATCHDOG" message. Lets use a single TX ring to fix the problem, this driver is not a real multiqueue one yet. Minimal fix for stable kernels. Reported-by: Thomas Meyer <thomas@m3y3r.de> Tested-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net/ethernet: ks8851_mll fix irq handlingJan Weitzel1-8/+6
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15veth: Enforce minimum size of VETH_INFO_PEERThomas Graf1-1/+3
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA attributes. A minimal size of sizeof(struct ifinfomsg) must be enforced or we may risk accessing that struct beyond the limits of the netlink message. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: update the driver version to Feb 2012 (v2)Giuseppe CAVALLARO1-1/+1
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: move hw init in the probe (v2)Giuseppe CAVALLARO4-116/+105
This patch moves the MAC HW initialization and the HW feature verification from the open to the probe function as D. Miller suggested. So the patch actually reorganizes and tidies-up some parts of the driver and indeed fixes some problem when tune its HW features. These can be overwritten by looking at the HW cap register at run-time and that generated problems. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: request_irq when use an ext wake irq line (v2)Francesco Virlinzi1-0/+16
In case of we use an external Wake-Up IRQ line (priv->wol_irq != dev->irq) we need to invoke the request_irq. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: do not discard frame on dribbling bit assertGiuseppe CAVALLARO4-3/+9
If this bit is set and the CRC error is reset, then the packet is valid. Only report this as stat info. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15ipheth: Add iPhone 4STim Gardner1-0/+5
BugLink: http://bugs.launchpad.net/bugs/900802 Cc: stable@vger.kernel.org 3.2+ Signed-off-by: Till Kamppeter <till.kamppeter@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: add unicast steering entries to resource_trackerEugenia Emantayev1-7/+11
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix QP tree trashingEugenia Emantayev1-0/+1
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix buffer overrunEugenia Emantayev1-1/+1
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15ath9k: stop on rates with idx -1 in ath9k rate control's .tx_statusPavel Roskin1-1/+1
Rate control algorithms are supposed to stop processing when they encounter a rate with the index -1. Checking for rate->count not being zero is not enough. Allowing a rate with negative index leads to memory corruption in ath_debug_stat_rc(). One consequence of the bug is discussed at https://bugzilla.redhat.com/show_bug.cgi?id=768639 Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15mwifiex: clear previous security setting during associationAmitkumar Karwar1-1/+7
Driver maintains different flags for WEP, WPA, WPA2 security modes. Appropriate flag is set using security information provided in connect request. mwifiex_is_network_compatible() routine uses them to check if driver's setting is compatible with AP. Association is aborted if the routine fails. For some corner cases, it is observed that association is failed even for valid security information based on association history. This patch fixes the problem by clearing previous security setting during each association. We should set WEP key provided in connect request as default tx key. This missing change is also added here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15Merge branch 'master' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-143c59x: shorten timer period for slave devicesEric Dumazet1-1/+1
Jean Delvare reported bonding on top of 3c59x adapters was not detecting network cable removal fast enough. 3c59x indeed uses a 60 seconds timer to check link status if carrier is on, and 5 seconds if carrier is off. This patch reduces timer period to 5 seconds if device is a bonding slave. Reported-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14bnx2x: remove the 'poll' module optionMichal Schmidt1-16/+1
'poll' was a debugging option, but turning it on these days leads to kernel panic. Remove it. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13ks8851: Fix NOHZ local_softirq_pending 08 warningCousson, Benoit1-1/+1
This fix a similar problem as in 72092cc45378176ba700034c91b7af2db524df26 and 481a8199142c050b72bff8a1956a49fd0a75bbe0 ("can: fix NOHZ local_softirq_pending 08 warning"). This fix replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13bnx2x: fix bnx2x_storm_stats_update() on big endianEric Dumazet1-4/+4
commit 619c5cb6885 (New 7.0 FW: bnx2x, cnic, bnx2i, bnx2fc) added new sparse warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Vladislav Zolotarov <vladz@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13ixp4xx-eth: fix PHY name to match MDIO bus nameFlorian Fainelli1-1/+2
Commit 0869b3a4: ixp4xx-eth: use an unique MDIO bus name changed the MDIO bus name from "0" to "ixp4xx-eth-0", as a result the PHY name is not longer appropriate and will not match the MDIO bus name so PHY connection will not succeed, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13octeon: fix PHY name to match MDIO bus nameFlorian Fainelli1-2/+2
Commit "d6c25be: mdio-octeon: use an unique MDIO bus name" changed the octeon MDIO bus name from "0" to "mdio-octeon-0", change the PHY formatting logic to account for that name change, so that PHY connection on this bus succeeds. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13fec: fix PHY name to match fixed MDIO bus nameFlorian Fainelli1-1/+1
Commit "391420f7: fec: use an unique MDIO bus name" first modified the MDIO bus name to include the platform name, then in commit "a7ed07d5: net: fec: correct phy_name buffer length when init phy_name" the PHY name formatting was fixed in the case the PHY matches a PHY driver. The FEC driver however, also handles the case where we want to attach to the fixed MDIO bus name, which was previously named "0", and now "fixed-0". Change the PHY formatting logic to account for that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13bcm63xx-enet: fix PHY name to match MDIO bus nameFlorian Fainelli1-1/+1
Commit 3e617506: bcm63xx_enet: use an unique MDIO bus name introduced a regression in the PHY connection logic, since the PHY name was formatted to expect the bus name to be "0" or "1", whereas it is now "bcm63xx-enet-0" or "bcm63xx-enet-1". Reported-by: Joel EJC <joel_ejc@yahoofr> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13cpmac: fix PHY name to match MDIO bus nameFlorian Fainelli1-2/+2
Commit d1733f07: cpmac: use an unique MDIO bus name changed the MDIO bus name from "1" to "cpmac-1", this breaks the PHY connection logic because the PHY name still uses the old bus names "0" and "1", fix that to always use the mdio bus id instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13mlx4: Fix kcalloc parameters swappedAxel Lin1-2/+3
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds85-267/+348
Quoth David: 1) GRO MAC header comparisons were ethernet specific, breaking other link types. This required a multi-faceted fix to cure the originally noted case (Infiniband), because IPoIB was lying about it's actual hard header length. Thanks to Eric Dumazet, Roland Dreier, and others. 2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular. From Anisse Astier. 3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman. 4) ipv4 TCP reset generation needs to respect any network interface binding from the socket, otherwise route lookups might give a different result than all the other segments received. From Shawn Lu. 5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas Graf. 6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda. 7) Revert skge PCI mapping changes that are causing crashes for some folks, from Stephen Hemminger. 8) IPV4 route lookups fill in the wildcarded fields of the given flow lookup key passed in, which is fine most of the time as this is exactly what the caller's want. However there are a few cases that want to retain the original flow key values afterwards, so handle those cases properly. Fix from Julian Anastasov. 9) IGB/IXGBE VF lookup bug fixes from Greg Rose. 10) Properly null terminate filename passed to ethtool flash device method, from Ben Hutchings. 11) S3 resume fix in via-velocity from David Lv. 12) Fix double SKB free during xmit failure in CAIF, from Dmitry Tarnyagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr. netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m netprio_cgroup: don't allocate prio table when a device is registered netprio_cgroup: fix an off-by-one bug bna: fix error handling of bnad_get_flash_partition_by_offset() isdn: type bug in isdn_net_header() net: Make qdisc_skb_cb upper size bound explicit. ixgbe: ethtool: stats user buffer overrun ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state ixgbe: do not update real num queues when netdev is going away ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size ixgbe: Fix case of Tx Hang in PF with 32 VFs ixgbe: fix vf lookup igb: fix vf lookup e1000: add dropped DMA receive enable back in for WoL gro: more generic L2 header check IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses zd1211rw: firmware needs duration_id set to zero for non-pspoll frames net: enable TC35815 for MIPS again ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-14 04:48:01 +0000