summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2014-01-22Merge tag 'stable/for-linus-3.14-rc0-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "Two major features that Xen community is excited about: The first is event channel scalability by David Vrabel - we switch over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO queue with priorities. This lets us be able to handle more events, have lower latency, and better scalability. Good stuff. The other is PVH by Mukesh Rathor. In short, PV is a mode where the kernel lets the hypervisor program page-tables, segments, etc. With EPT/NPT capabilities in current processors, the overhead of doing this in an HVM (Hardware Virtual Machine) container is much lower than the hypervisor doing it for us. In short we let a PV guest run without doing page-table, segment, syscall, etc updates through the hypervisor - instead it is all done within the guest container. It is a "hybrid" PV - hence the 'PVH' name - a PV guest within an HVM container. The major benefits are less code to deal with - for example we only use one function from the the pv_mmu_ops (which has 39 function calls); faster performance for syscall (no context switches into the hypervisor); less traps on various operations; etc. It is still being baked - the ABI is not yet set in stone. But it is pretty awesome and we are excited about it. Lastly, there are some changes to ARM code - you should get a simple conflict which has been resolved in #linux-next. In short, this pull has awesome features. Features: - FIFO event channels. Key advantages: support for over 100,000 events (2^17), 16 different event priorities, improved fairness in event latency through the use of FIFOs. - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized disk and network, paravirtualized interrupts and timers, no emulated devices of any kind (and thus no qemu), no BIOS or legacy boot — but instead of requiring PV MMU, it uses the HVM hardware extensions to virtualize the pagetables, as well as system calls and other privileged operations." (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum") Bug-fixes: - Fixes in balloon driver (refactor and make it work under ARM) - Allow xenfb to be used in HVM guests. - Allow xen_platform_pci=0 to work properly. - Refactors in event channels" * tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits) xen/pvh: Set X86_CR0_WP and others in CR0 (v2) MAINTAINERS: add git repository for Xen xen/pvh: Use 'depend' instead of 'select'. xen: delete new instances of __cpuinit usage xen/fb: allow xenfb initialization for hvm guests xen/evtchn_fifo: fix error return code in evtchn_fifo_setup() xen-platform: fix error return code in platform_pci_init() xen/pvh: remove duplicated include from enlighten.c xen/pvh: Fix compile issues with xen_pvh_domain() xen: Use dev_is_pci() to check whether it is pci device xen/grant-table: Force to use v1 of grants. xen/pvh: Support ParaVirtualized Hardware extensions (v3). xen/pvh: Piggyback on PVHVM XenBus. xen/pvh: Piggyback on PVHVM for grant driver (v4) xen/grant: Implement an grant frame array struct (v3). xen/grant-table: Refactor gnttab_init xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init. xen/pvh: Piggyback on PVHVM for event channels (v2) xen/pvh: Update E820 to work with PVH (v2) xen/pvh: Secondary VCPU bringup (non-bootup CPUs) ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-20Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: - add RCU torture scripts/tooling - static analysis improvements - update RCU documentation - miscellaneous fixes * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) rcu: Remove "extern" from function declarations in kernel/rcu/rcu.h rcu: Remove "extern" from function declarations in include/linux/*rcu*.h rcu/torture: Dynamically allocate SRCU output buffer to avoid overflow rcu: Don't activate RCU core on NO_HZ_FULL CPUs rcu: Warn on allegedly impossible rcu_read_unlock_special() from irq rcu: Add an RCU_INITIALIZER for global RCU-protected pointers rcu: Make rcu_assign_pointer's assignment volatile and type-safe bonding: Use RCU_INIT_POINTER() for better overhead and for sparse rcu: Add comment on evaluate-once properties of rcu_assign_pointer(). rcu: Provide better diagnostics for blocking in RCU callback functions rcu: Improve SRCU's grace-period comments rcu: Fix CONFIG_RCU_FANOUT_EXACT for odd fanout/leaf values rcu: Fix coccinelle warnings rcutorture: Stop tracking FSF's postal address rcutorture: Move checkarg to functions.sh rcutorture: Flag errors and warnings with color coding rcutorture: Record results from repeated runs of the same test scenario rcutorture: Test summary at end of run with less chattiness rcutorture: Update comment in kvm.sh listing typical RCU trace events rcutorture: Add tracing-enabled version of TREE08 ...
2014-01-20Merge branch 'for-linus' of ↵Linus Torvalds5-14/+19
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Zorro bus cleanups and UAPI revival - Bootinfo cleanups and UAPI revival - Kexec support - Memory size reductions and bug fixes for multi-platform kernels - Polled interrupt support for Atari EtherNAT, EtherNEC and NetUSBee - Machine-specific random_get_entropy() - Defconfig updates and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (46 commits) m68k/mac: Make SCC reset work more reliably m68k/irq - Use polled IRQ flag for MFP timer cascaded interrupts m68k: Update defconfigs for v3.13-rc1 m68k/defconfig: Enable EARLY_PRINTK m68k/mm: kmap spelling/grammar fixes m68k: Convert arch/m68k/kernel/traps.c to pr_*() m68k: Convert arch/m68k/mm/fault.c to pr_*() m68k/mm: Check for mm != NULL in do_page_fault() debug code m68k/defconfig: Disable /sbin/hotplug fork-bomb by default m68k/atari: Hide RTC_PORT() macro from rtc-cmos m68k/amiga,atari: Fix specifying multiple debug= parameters m68k/defconfig: Use ext4 for ext2/ext3 file systems m68k: Add support to export bootinfo in procfs m68k: Add kexec support m68k/mac: Mark Mac IIsi ADB driver BROKEN m68k/amiga: Provide mach_random_get_entropy() m68k: Add infrastructure for machine-specific random_get_entropy() m68k/atari: Call paging_init() before nf_init() m68k: Remove superfluous inclusions of <asm/bootinfo.h> m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h> ...
2014-01-16e1000e: Fix compilation warning when !CONFIG_PM_SLEEPMika Westerberg1-6/+2
Commit 7509963c703b (e1000e: Fix a compile flag mis-match for suspend/resume) moved suspend and resume hooks to be available when CONFIG_PM is set. However, it can be set even if CONFIG_PM_SLEEP is not set causing following warnings to be emitted: drivers/net/ethernet/intel/e1000e/netdev.c:6178:12: warning: ‘e1000_suspend’ defined but not used [-Wunused-function] drivers/net/ethernet/intel/e1000e/netdev.c:6185:12: warning: ‘e1000_resume’ defined but not used [-Wunused-function] To fix this make the hooks to be available only when CONFIG_PM_SLEEP is set and remove CONFIG_PM wrapping from driver ops because this is already handled by SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Dave Ertman <davidx.m.ertman@intel.com> Cc: Aaron Brown <aaron.f.brown@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: add dma_mapping_error() check for dma_map_page()Ivan Vecera1-2/+9
The driver does not check value returned by dma_map_page. The patch fixes this. v2: Removed the bugfix for non-bug ;-) (thanks Sathya) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Sathya Perla <Sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15bnx2x: Don't release PCI bars on shutdownYuval Mintz1-14/+15
The bnx2x driver in its pci shutdown() callback releases its pci bars (in the same manner it does during its pci remove() callback). During a system reboot while VFs are enabled, its possible for the VF's remove to be called (as a result of pci_disable_sriov()) after its shutdown callback has already finished running; This will cause a paging request fault as the VF tries to access the pci bar which it has previously released, crashing the system. This patch further differentiates the shutdown and remove callbacks, preventing the pci release procedures from being called during shutdown. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15net,via-rhine: Fix tx_timeout handlingRichard Weinberger1-0/+1
rhine_reset_task() misses to disable the tx scheduler upon reset, this can lead to a crash if work is still scheduled while we're resetting the tx queue. Fixes: [ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6 Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14qlge: Fix vlan netdev features.Jitendra Kalsaria1-0/+2
vlan gets the same netdev features except vlan filter. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14dm9601: add USB IDs for new dm96xx variantsPeter Korsgaard1-0/+12
A number of new dm96xx variants now exist. Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: usbnet: fix SG initialisationBjørn Mork1-1/+1
Commit 60e453a940ac ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a940ac ("USBNET: fix handling padding packet") Reported-by: Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13cxgb4: silence shift wrapping static checker warningDan Carpenter1-1/+1
I don't know how large "tp->vlan_shift" is but static checkers worry about shift wrapping bugs here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10qlcnic: Fix ethtool statistics length calculationShahed Shaikh1-18/+21
o Consider number of Tx queues while calculating the length of Tx statistics as part of ethtool stats. o Calculate statistics lenght properly for 82xx and 83xx adapter Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10qlcnic: Fix bug in TX statisticsManish Chopra3-1/+5
o Driver was not updating TX stats so it was not populating statistics in `ifconfig` command output. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10net: core: explicitly select a txq before doing l2 forwardingJason Wang12-36/+36
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10macvlan: forbid L2 fowarding offload for macvtapJason Wang1-1/+4
L2 fowarding offload will bypass the rx handler of real device. This will make the packet could not be forwarded to macvtap device. Another problem is the dev_hard_start_xmit() called for macvtap does not have any synchronization. Fix this by forbidding L2 forwarding for macvtap. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10Merge branch 'for-davem' of ↵David S. Miller2-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== For the mac80211 bits, Johannes says: "I have a fix from Javier for mac80211_hwsim when used with wmediumd userspace, and a fix from Felix for buffering in AP mode." For the NFC bits, Samuel says: "This pull request only contains one fix for a regression introduced with commit e29a9e2ae165620d. Without this fix, we can not establish a p2p link in target mode. Only initiator mode works." For the iwlwifi bits, Emmanuel says: "It only includes new device IDs so it's not vital. If you have a pull request to net.git anyway, I'd happy to have this in." ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10bnx2x: fix DMA unmapping of TSO split BDsMichal Schmidt1-4/+9
bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920() bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x00000000da2b389e] [map size=1490 bytes] [unmap size=66 bytes] The reason is that bnx2x splits a TSO BD into two BDs (headers + data) using one DMA mapping for both, but it uses only the length of the first BD when unmapping. This patch fixes the bug by unmapping the whole length of the two BDs. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09bnx2x: prevent WARN during driver unloadYuval Mintz2-18/+38
Starting with commit 80c33dd "net: add might_sleep() call to napi_disable" bnx2x fails the might_sleep tests causing a stack trace to appear whenever the driver is unloaded, as local_bh_disable() is being called before napi_disable(). This changes the locking schematics related to CONFIG_NET_RX_BUSY_POLL, preventing the need for calling local_bh_disable() and thus eliminating the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09Merge branch 'master' of ↵John W. Linville2-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2014-01-07treewide: fix comments and printk msgsMasanari Iida1-1/+1
This patch fixed several typo in printk from various part of kernel source. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-06hso: fix handling of modem port SERIAL_STATE notificationsDan Williams1-2/+11
The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'for-john' of ↵John W. Linville1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-01-06Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2014-01-06be2net: fix max_evt_qs calculation for BE3 in SR-IOV configSuresh Reddy2-4/+9
The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF. When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: increase the timeout value for loopback-test FW cmdSuresh Reddy3-12/+22
The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: disable RSS when number of RXQs is reduced to 1 via set-channelsVasundhara Volam2-6/+12
When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05xen-netback: Include header for vmallocJosh Boyer1-0/+1
Commit ac3d5ac27735 ("xen-netback: fix guest-receive-side array sizes") added calls to vmalloc and vfree in the interface.c file without including <linux/vmalloc.h>. This causes build failures if the -Werror=implicit-function-declaration flag is passed. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05fec: Revert "fec: Do not assume that PHY reset is active low"Fabio Estevam1-10/+4
In order to keep DT compatibility we need to revert this, otherwise the original dts files will no longer work with this driver change. This reverts commit 7a399e3a2e05bc580a78ea72371b3896827f72e1. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: fix VLAN configuration for VFs.Yuval Mintz5-112/+174
If the hypervisor configures a vlan for the VF via the PF, the expected result is that only packets tagged by said vlan will be received by the VF (and that vlan will be silently removed). Due to an incorrect manipulation of vlan filters in the driver, the VF can receive untagged traffic even if the hypervisor configured some vlan for it. This patch corrects the behaviour. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: fix AFEX memory overflowYuval Mintz1-1/+4
There are 2 different (related) flows in the slowpath configuration that utilize the same pointer and cast it to different structs; This is obviously incorrect as the intended allocated memory is that of the smaller struct, possibly causing the flow utilizing the larger struct to corrupt other slowpath configuration. Since both flows are exclusive, set the allocated memory to be a union of both structs. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: Clean before update RSS arrivesMichal Kalderon2-1/+7
When a PF receives a VF message indicating a change in RSS properties it should clean the flags' bit-fields; Otherwise, it's possible that some random values will be considered as flags by the lower layers configuring the RSS in FW. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: Correct number of MSI-X vectors for VFsMichal Kalderon1-3/+6
Number of VFs in PCIe configuration space is zero-based. Driver incorrectly sets the number of VFs to be larger by one than what actually is feasible by HW, which might cause later VFs to fail to allocate their MSI-X interrupts. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: limit number of interrupt vectors for 57711Dmitry Kravkov2-3/+5
Original straightforward division may lead to zeroing number of SB and null-pointer dereference when device is short of MSIX vectors or lacks MSIX capabilities. Reported-by: Vladislav Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03qlcnic: Fix bug in Tx completion pathShahed Shaikh4-7/+12
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03{vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properlyfan.du1-1/+2
Even if user doesn't supply the physical netdev to attach vxlan dev to, and at the same time user want to vxlan sit top of IPv6, mark vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket. Otherwise kernel crashes safely every time spitting below messages, Steps to reproduce: ip link add vxlan0 type vxlan id 42 group ff0e::110 ip link set vxlan0 up [ 62.656266] BUG: unable to handle kernel NULL pointer dereference[ 62.656320] ip (3008) used greatest stack depth: 3912 bytes left at 0000000000000046 [ 62.656423] IP: [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0 [ 62.656674] Oops: 0000 [#1] SMP [ 62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key [ 62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182 [ 62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000 [ 62.657083] RIP: 0010:[<ffffffff816d822d>] [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP: 0000:ffff88002fd038f8 EFLAGS: 00210296 [ 62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000 [ 62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278 [ 62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000 [ 62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001 [ 62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001 [ 62.657083] FS: 0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740 [ 62.657083] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0 [ 62.657083] Stack: [ 62.657083] ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480 [ 62.657083] ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00 [ 62.657083] ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001 [ 62.657083] Call Trace: [ 62.657083] <IRQ> [ 62.657083] [<ffffffff816cac8b>] ip6_dst_lookup_tail+0xdb/0xf0 [ 62.657083] [<ffffffff816caea0>] ip6_dst_lookup+0x10/0x20 [ 62.657083] [<ffffffffa0020c13>] vxlan_xmit_one+0x193/0x9c0 [vxlan] [ 62.657083] [<ffffffff8137b3b7>] ? account+0xc7/0x1f0 [ 62.657083] [<ffffffffa0021513>] vxlan_xmit+0xd3/0x400 [vxlan] [ 62.657083] [<ffffffff8161390d>] dev_hard_start_xmit+0x49d/0x5e0 [ 62.657083] [<ffffffff81613d29>] dev_queue_xmit+0x2d9/0x480 [ 62.657083] [<ffffffff817cb854>] ? _raw_write_unlock_bh+0x14/0x20 [ 62.657083] [<ffffffff81630565>] ? eth_header+0x35/0xe0 [ 62.657083] [<ffffffff8161bc5e>] neigh_resolve_output+0x11e/0x1e0 [ 62.657083] [<ffffffff816ce0e0>] ? ip6_fragment+0xad0/0xad0 [ 62.657083] [<ffffffff816cb465>] ip6_finish_output2+0x2f5/0x470 [ 62.657083] [<ffffffff816ce166>] ip6_finish_output+0x86/0xc0 [ 62.657083] [<ffffffff816ce218>] ip6_output+0x78/0xb0 [ 62.657083] [<ffffffff816eadd6>] mld_sendpack+0x256/0x2a0 [ 62.657083] [<ffffffff816ebd8c>] mld_ifc_timer_expire+0x17c/0x290 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81051065>] call_timer_fn+0x45/0x150 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81052353>] run_timer_softirq+0x1f3/0x2a0 [ 62.657083] [<ffffffff8102dfd8>] ? lapic_next_event+0x18/0x20 [ 62.657083] [<ffffffff8109e36f>] ? clockevents_program_event+0x6f/0x110 [ 62.657083] [<ffffffff8104a2f6>] __do_softirq+0xd6/0x2b0 [ 62.657083] [<ffffffff8104a75e>] irq_exit+0x7e/0xa0 [ 62.657083] [<ffffffff8102ea15>] smp_apic_timer_interrupt+0x45/0x60 [ 62.657083] [<ffffffff817d3eca>] apic_timer_interrupt+0x6a/0x70 [ 62.657083] <EOI> [ 62.657083] [<ffffffff817d4a35>] ? sysenter_dispatch+0x7/0x1a [ 62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff [ 62.657083] RIP [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP <ffff88002fd038f8> [ 62.657083] CR2: 0000000000000046 [ 62.657083] ---[ end trace ba8a9583d7cd1934 ]--- [ 62.657083] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Fan Du <fan.du@windriver.com> Reported-by: Ryan Whelan <rcwhelan@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03cxgb4: allow large buffer size to have page sizeThadeu Lima de Souza Cascardo1-1/+1
Since commit 52367a763d8046190754ab43743e42638564a2d1 ("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"), we have failures like this during cxgb4 probe: cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536] cxgb4: probe of 0000:01:00.4 failed with error -22 This happens whenever software parameters are used, without a configuration file. That happens when the hardware was already initialized (after kexec, or after csiostor is loaded). It happens that these values are acceptable, rendering fl_pg_order equal to 0, which is the case of a hard init when the page size is equal or larger than 65536. Accepting fl_large_pg equal to fl_small_pg solves the issue, and shouldn't cause any trouble besides a possible performance reduction when smaller pages are used. And that can be fixed by a configuration file. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).Konrad Rzeszutek Wilk1-1/+1
The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] CC: stable@vger.kernel.org
2014-01-02virtio-net: fix refill races during restoreJason Wang1-5/+6
During restoring, try_fill_recv() was called with neither napi lock nor napi disabled. This can lead two try_fill_recv() was called in the same time. Fix this by refilling before trying to enable napi. Fixes 0741bcb5584f9e2390ae6261573c4de8314999f2 (virtio: net: Add freeze, restore handlers to support S4). Cc: Amit Shah <amit.shah@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02qlcnic: Fix resource allocation for TX queuesManish Chopra1-1/+2
o TX queues allocation was getting distributed equally among all the functions of the port including VFs and PF. Which was leading to failure in PF's multiple TX queues creation. o Instead of dividing queues equally allocate one TX queue for each VF as VF doesn't support multiple TX queues. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02qlcnic: Fix loopback diagnostic testManish Chopra3-6/+7
o Adapter requires that if the port is in loopback mode no traffic should be flowing through that port, so on arrival of Link up AEN, do not advertise Link up to the stack until port is out of loopback mode Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix KR2 work-around detection of BCM8073Yaniv Rosner1-1/+1
KR2 work-around is based on detecting non-KR2 devices which may not link up in this mode. One such link-partner is the BCM8073 which has specific advertisement characteristics in specific mode, and this condition was not set correctly. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix incorrect link-up reportYaniv Rosner1-0/+4
Fix a problem where link is reported to be up when SFP+ module is plugged in without cable. This occurs with specific module types which may generate temporary TX_FAULT indication. Solution is to avoid changing any link parameters when checking TX_FAULT indication while physical link is down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix Duplex setting for 54618seYaniv Rosner1-26/+28
BCM54618SE is used to advertise half-duplex even if HD was not requested by the user. This change makes the legacy speed/duplex advertisement for this PHY exactly according to the requested speed and duplex. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix passive DAC cable detectionYaniv Rosner1-9/+12
Fix Passive DAC detection for specific cables, such that even in case SFP_CABLE_TECHNOLOGY option is not set in the EEPROM (offset 8), treat it as a passive DAC cable, since some cables don't have this indication. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix 578xx-KR 1G linkYaniv Rosner2-0/+14
Fix a problem where 578xx-KR is unable to get link when connected to 1G link partner. Two fixes were required: One was to force CL37 sync_status low to prevent Warpcore from getting stuck in CL73 parallel detect loop while link partner is sending. Second fix was to enable auto-detect mode, thus allowing the Warpcore to select the higher speed protocol between 10G-KR (over CL73), or go down to 1G over CL73 when there's indication for it. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31usbnet: mcs7830: rework link state detectionOctavian Purdila1-15/+4
Even with the quirks in commit dabdaf0c (mcs7830: Fix link state detection) there are still spurious link-down events for some chips where the false link-down events count go over a few hundreds. This patch takes a more conservative approach and only looks at link-down events where the link-down state is not combined with other states (e.g. half/full speed, pending frames in SRAM or TX status information valid). In all other cases we assume the link is up. Tested on MCS7830CV-DA (USB ID 9710:7830). Cc: Ondrej Zary <linux@rainbow-software.org> Cc: Michael Leun <lkml20120218@newton.leun.net> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31iwlwifi: add new devices for 7265 seriesOren Givon1-2/+8
Add new device / subdevice ID for 7265 series. Fix 2 mistakes on the way. Signed-off-by: Oren Givon <oren.givon@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-29stmmac: Fix incorrect spinlock release and PTP cap detection.Vince Bridgers2-13/+11
This patch corrects a problem in stmmac_ptp.c, functions stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks were released. This patch also addresses a problem in stmmac_main, function stmmac_init_ptp where the capability detection for advanced timestamping was masked by message masking. This patch was touch tested using linuxptp, and runs without the previously observed instabilities. More extensive testing is ongoing. Vince Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-29phy: IRQ cannot be sharedSergei Shtylyov1-4/+2
With the way PHY IRQ handler is implemented (all real handling being pushed to the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot really claim that PHY IRQ can be shared when calling request_irq(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-06 11:31:33 +0000