summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2022-12-01wifi: mt76: connac: rework macros for unified commandShayne Chen1-3/+15
Rework some macros for connac3 unified command. This is a preliminary patch to add mt7996 chipset support. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: introduce chanctx supportSean Wang7-17/+157
The firmware can have the capability to manage the channel context scheduling on multiple roles running on the device including Station, AP and P2P GC/GO mode (will be extended based on the future patchset) to help users sharing the network with others on a single device. The firmware is able to support the channel chanctx up to 2 interface simultaneously running on the different channels. Another thing to be noted is that before the driver is going sent out the management frames, the driver has to get the privilege from the firmware to occupy the current channel context until the frame handshake is completed and then get the privilege back to the firmware. Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: introduce remain_on_channel supportSean Wang7-12/+303
Introduce remain_on_channel support. Additionally, we add mt7921_check_offload_capability to disable .remain_on_channel and .cancel_remain_on_channel and related configuration because those operations would rely on the fundamental MCU commands that will be only supported with newer firmware. Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: accept hw scan request at a timeSean Wang1-0/+3
The current hw scan cannot accept multiple hw scan requests at a time, we return the proper error code when the hw scan is still undergoing. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: drop ieee80211_[start, stop]_queues in driverSean Wang1-18/+0
The firmware would be in charge of braking and continuing the traffic while the channel contexts are switching between different BSS and HW SCAN in the background. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: add unified ROC cmd/event supportQuan Zhou3-2/+146
Add unified ROC cmd/event which is only supported by the newer fw. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Kaikai Hu <kaikai.hu@mediatek.com> Signed-off-by: Kaikai Hu <kaikai.hu@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: add chanctx parameter to mt76_connac_mcu_uni_add_bss ↵Sean Wang5-10/+14
signature Add a chanctx parameter to mt76_connac_mcu_uni_add_bss signature to allow the firmware binds the BSS into the specific channel context. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: add mt76_connac_mcu_uni_set_chctxSean Wang2-68/+82
add mt76_connac_mcu_uni_set_chctx to set up the channel context per BSS in the firmware Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: do not run mt76u_status_worker if the device is not runningLorenzo Bianconi1-4/+7
Fix the following NULL pointer dereference avoiding to run mt76u_status_worker thread if the device is not running yet. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mt76 mt76u_tx_status_data RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: mt76x02_send_tx_status+0x1d2/0xeb0 mt76x02_tx_status_data+0x8e/0xd0 mt76u_tx_status_data+0xe1/0x240 process_one_work+0x92b/0x1460 worker_thread+0x95/0xe00 kthread+0x3a1/0x480 ret_from_fork+0x1f/0x30 Modules linked in: --[ end trace 8df5d20fc5040f65 ]-- RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Moreover move stat_work schedule out of the for loop. Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: update nss calculation in txsEvelyn Tsai1-1/+5
The hardware reports the number of transmitting antennas not the actual number of spatial streams Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: don't claim 160MHz support with mt7915 DBDCNicolas Cavallari1-16/+31
The hardware simply does not support this in DBDC mode. Remove it from the HE capabilities. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: Fix VHT beamforming capabilities with DBDCNicolas Cavallari1-1/+2
Do not hardcode beamformee 4 space-time streams support, because DBDC can only support up to 2. Fixes: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities") Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDCNicolas Cavallari1-0/+1
mt7915 does not have a per-band number of chains unlike the other chips, it only has a total number of chains. Yet the current code would consider the total number as a per-band number. For example, it would report that a 2x2 + 2x2 DBDC card have 4 chains on each band and set chainmask to 0b1111 for the first interface and 0b11110000 for the second. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable coredump supportRyder Lee9-8/+742
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, task/irq info, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add full system reset into debugfsRyder Lee5-14/+80
Trigger firmware crash and enable full system recovery through debugfs. This also renames knob "fw_ser" to a clear-cut name "sys_recovery". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable full system reset supportBo Jiao7-26/+264
Add mt7915_reset() and refactor mt7915_mac_reset_work() to support full system recovery. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: rework mt7915_dma_reset()Bo Jiao3-89/+91
Reuse mt7915_dma_disable() to reduce duplicated code. This is a preliminary patch to enable full system reset. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: move aggr_stats array in mt76_phyLorenzo Bianconi13-45/+35
Move aggregation stats array per-phy instead of share it between multiple interfaces. This is a preliminary patch to add mt7996 driver support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7615: rely on mt7615_phy in mt7615_mac_reset_countersLorenzo Bianconi3-8/+6
This is a preliminary patch to move aggr_stats array in mt76_phy structure. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: fix reporting of TX AGGR histogramLorenzo Bianconi1-1/+1
Similar to mt7915, fix stats clash between bins [4-7] in 802.11 tx aggregation histogram. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: fix reporting of TX AGGR histogramLorenzo Bianconi1-1/+1
Fix stats clash between bins [4-7] in 802.11 tx aggregation histogram. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7615: enable use_cts_prot supportRyder Lee4-0/+22
This adds selectable RTC/CTS enablement for each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable use_cts_prot supportRyder Lee3-0/+18
This adds selectable RTC/CTS enablement for each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: fix bandwidth 80MHz link fail in 6GHz bandMing Yen Hsieh2-0/+45
Due to information missing, the firmware may be fail on bandwidth related settings in mt7921/mt7922. Add new cmd STA_REC_HE_V2 to apply additional capabilities in 6GHz band. Tested-by: Ben Greear <greearb@candelatech.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add ack signal supportRyder Lee7-7/+51
This reports signal strength of ACK packets from the peer as measured at each interface. Tested-by: Shurong Wen <shurong.wen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: improve accuracy of time_busy calculationRyder Lee4-13/+61
The MIB INFO command is fetching MIB_BUSY_TIME, MIB_TX_TIME, MIB_RX_TIME and MIB_OBSS_AIRTIME from the radio and filling out cc_busy, cc_tx, cc_bss_rx and cc_rx respectively. busy should be >= tx + rx >= tx + bss_rx but we don’t always quite see this. Sometimes tx + rx is a bit higher than busy due to inaccurate accounting, so this patch recalculates numbers to make them more reasonable. Reported-By: Kevin Schneider <kevin.schneider@adtran.com> Tested-by: Kevin Schneider <kevin.schneider@adtran.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01Revert "mt76: use IEEE80211_OFFLOAD_ENCAP_ENABLED instead of ↵Ben Greear6-5/+14
MT_DRV_AMSDU_OFFLOAD" This reverts commit f17f4864504d754bcbf31e4c89412cdf9946c409 and adds the MT_DRV_AMSDU_OFFLOAD flag for MT7921 USB/SDIO The reverted commit significantly decreases performance when running a test where two MT7915 radios have 16 station vdevs each, configured for AC mode, and transmitting UDP traffic to AP. Co-developed-by: Felix Fietkau <nbd@nbd.name> Reported-by: Carson Vandegriffe <carson.vandegriffe@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable wed for mt7986-wmac chipsetLorenzo Bianconi8-55/+134
Enable WED tx support for mt7986-wmac chipset available on mt7986 board. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable wed for mt7986 chipsetLorenzo Bianconi3-0/+20
Introduce wed tx support for MT7986 chipset Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: move wed init routines in mmio.cLorenzo Bianconi3-92/+94
This is a preliminary patch to enable wed support for mt7986-wmac chipset. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: fix mt7915_mac_set_timing()Ryder Lee1-6/+15
Correct mac timiing settings for different hardware generations. This improves 40-60Mbps performance. Fixes: 9aac2969fe5f ("mt76: mt7915: update mac timing settings") Reported-By: Carson Vandegriffe <carson.vandegriffe@candelatech.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: set correct antenna for radar detection on MT7915DShayne Chen2-0/+16
For MT7915D, correct antenna index should be set to let DFS radar detection work on the 5 GHz band. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: add spatial extension index supportShayne Chen4-7/+21
In previous, we only allow user to configure tx antenna mask contiguously (e.g. 0x3, 0xf). This patch allows user to configure tx antenna mask interleavingly (e.g. 0x5, 0x8). By setting proper antenna mask and nss, user can prioritized the signal of different antennas, which helps to test their performance in normal mode. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: connac: introduce mt76_connac_spe_idx()Shayne Chen3-4/+20
Add mt76_connac_spe_idx() for antenna mask to spatial extension index conversion. This is used to support flexible control of tx antenna. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: rework testmode tx antenna settingShayne Chen2-16/+9
Let the configuration of testmode antenna mask on both band0 and band1 become antenna_mask rather than chainmask. This could simplify the settings for user and get rid of the conversion when sending fw command. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: deal with special variant of mt7916Peter Chiu3-32/+32
A variant of mt7916 supports up to 3 tx/rx paths but with only 2 spatial streams. An example usage of the 3rd path is to server as an auxiliary for beamforming. In order to deal with this case, this patch reworks some parts to correctly use paths or streams. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: rework eeprom tx paths and streams initShayne Chen2-39/+23
Rework tx paths and streams init part to improve readability, and make sure that the available tx streams should be smaller than or equal to the available tx paths. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: reserve 8 bits for the index of rf registersEvelyn Tsai2-3/+3
The value of regidx of rf registers is combined with WF selection and offset. Extend the WF selection field from 4 to 8 bits since the adie index should also be specified. Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: fix bounds checking for tx-free-done commandBen Greear1-3/+5
According to the tx-free-done documentation, the DW4 can be repeated, so have to be more careful about how we test for walking off the end of the array. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: Remove unused inline function mt76_wcid_mask_test()Gaosheng Cui1-6/+0
All uses of mt76_wcid_mask_test() have been removed since commit 8950a62f19c9 ("mt76: get rid of mt76_wcid_hw routine"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: fix antenna signal are way off in monitor modeSean Wang1-11/+21
Group 3 in RxD is disabled in monitor mode. We should use the group 5 in RxD instead to fix antenna signal way off issue, e.g we would see the incorrect antenna signal value in wireshark. On the other hand, Group 5 wouldn't be used in STA or AP mode, so the patch shouldn't cause any harm to those modes. Fixes: cbaa0a404f8d ("mt76: mt7921: fix up the monitor mode") Reported-by: Adrian Granados <agranados@gmail.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt76x02: simplify struct mt76x02_rate_powerFelix Fietkau7-46/+17
- remove stbc, because mt76x0 doesn't support it and mt76x2 uses the same values as HT/VHT - reduce vht array to 2 elements, because VHT MCS0-7 are the same as HT Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: move mt76_rate_power from core to mt76x02 driver codeFelix Fietkau15-62/+62
Its layout and code is mt76x02 specific Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: rtw89: link rtw89_vif and chanctx stuffsZong-Zhe Yang3-11/+50
First, introduce struct rtw89_sub_entity for chanctx related stuffs. Second, add enum rtw89_sub_entity_idx to rtw89_vif for vif operation to access its/right chanctx stuffs after future multi-channel support. Besides, RTW89_SUB_ENTITY_0 is the default chanctx entry throughout driver, i.e. it's used for things which may not have a target chanctx yet. So, we need to ensure that RTW89_SUB_ENTITY_0 is always working. If there is at least one alive chanctx, then one of them must take RTW89_SUB_ENTITY_0. If no alive chanctx, RTW89_SUB_ENTITY_0 will be filled by rtw89_config_default_chandef(). Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129083130.45708-7-pkshih@realtek.com
2022-12-01wifi: rtw89: fw: implement MCC related H2CZong-Zhe Yang2-1/+697
These MCC H2C(s) require to wait for MCC C2H to determine if the execution is successful. Through rtw89_wait_for_cond(), we make them wait for either a completion with data from MCC C2H handlers, which calls rtw89_complete_cond(), or timeout. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129083130.45708-6-pkshih@realtek.com
2022-12-01wifi: rtw89: mac: process MCC related C2HZong-Zhe Yang5-0/+280
Process C2H(s) related to MCC (multi-channel concurrency). These handling, which either call rtw89_complete_cond() or show message in debug mode, can be considered atomic/lock-free. So, they should be safe to be processed directly after C2H pre-check in previous patch. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129083130.45708-5-pkshih@realtek.com
2022-12-01wifi: rtw89: introduce helpers to wait/complete on conditionZong-Zhe Yang2-0/+60
MCC (multi-channel concurrency) related H2Cs (host to chip commands) require to wait for C2H (chip to host events) responses to judge the execution result and data. We introduce helpers to assist this process. Besides, we would like the helpers to be generic for use in driver even outside of MCC H2C/C2H, so we make a independent patch for them. In the following, I describe the things first. ``` (A) C2H is generated by FW, and then transferred upto driver. Hence, driver cannot get it immediately without a bit waitting/blocking. For this, we choose to use wait_for_completion_*() instead of busy polling. (B) From the driver management perspective, a scenario, e.g. MCC, may have mulitple kind of H2C functions requiring this process to wait for corresponding C2Hs. But, the driver management flow uses mutex to protect each behavior. So, one scenario triggers one H2C function at one time. To avoid rampant instances of struct completion for each H2C function, we choose to use one struct completion with one condition flag for one scenario. (C) C2Hs, which H2Cs will be waitting for, cannot be ordered with driver management flow, i.e. cannot enqueue work to the same ordered workqueue and cannot lock by the same mutex, to prevent H2C side from getting no C2H responses. So, those C2Hs are parsed in interrupt context directly as done in previous commit. (D) Following (C), the above underline H2Cs and C2Hs will be handled in different contexts without sync. So, we use atomic_cmpxchg() to compare and change the condition in atomic. ``` So, we introduce struct rtw89_wait_info which combines struct completion and atomic_t. Then, the below are the descriptions for helper functions. * rtw89_wait_for_cond() to wait for a completion based on a condition. * rtw89_complete_cond() to complete a given condition and carry data. Each rtw89_wait_info instance independently determines the meaning of its waitting conditions. But, RTW89_WAIT_COND_IDLE (UINT_MAX) is reserved. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129083130.45708-4-pkshih@realtek.com
2022-12-01wifi: rtw89: check if atomic before queuing c2hZong-Zhe Yang4-4/+68
Before queuing C2H work, we check atomicity of the C2H's handler first now. If atomic or lock-free, handle it directly; otherwise, handle it with mutex in work as previous. This prepares for MAC MCC C2Hs which require to be processed directly. And, their handlers will be functions which can be considered atomic. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129083130.45708-3-pkshih@realtek.com
2022-12-01wifi: rtw89: rfk: rename rtw89_mcc_info to rtw89_rfk_mcc_infoZong-Zhe Yang4-19/+19
The `rtw89_mcc_info mcc` is only for RFK MCC stuffs instead of common MCC management info. Replace it with `rtw89_rfk_mcc_info rfk_mcc` to avoid confusion and reserve `struct rtw89_mcc_info mcc` for MCC management code. (No logic changes.) Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129083130.45708-2-pkshih@realtek.com
2022-12-01wifi: rtw88: 8821c: enable BT device recovery mechanismPing-Ke Shih3-1/+33
8821ce is a combo card, and BT is a USB device that could get card lost during stress test, and need WiFi firmware to detect and recover it, so driver sends a H2C to enable this mechanism. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221128075653.5221-1-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-24 06:42:31 +0000