summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds16-23/+83
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds10-788/+96
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits) pcmcia: synclink_cs: fix information leak to userland pcmcia: don't call flush_scheduled_work() spuriously serial_cs: drop spurious flush_scheduled_work() call pcmcia/yenta: guide users in case of problems with O2-bridges pcmcia: fix unused function compile warning pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device pcmcia: add a few debug statements pcmcia: remove obsolete and wrong comments pcmcia: avoid messages on module (un)loading pcmcia: move driver name to struct pcmcia_driver pcmcia: remove the "Finally, report what we've done" message pcmcia: use autoconfiguration feature for ioports and iomem pcmcia: introduce autoconfiguration feature pcmcia: Documentation update pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device pcmcia: move config_{base,index,regs} to struct pcmcia_device pcmcia: simplify IntType pcmcia: simplify Status, ExtStatus register access pcmcia: remove Pin, Copy configuration register access pcmcia: move Vpp setup to struct pcmcia_device ...
2010-10-15llseek: automatically add .llseek fopArnd Bergmann13-23/+72
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-08Merge branch 'master' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-06ath9k_hw: fix regression in ANI listen time calculationFelix Fietkau1-1/+1
wireless-testing commit 37e5bf6535a4d697fb9fa6f268a8354a612cbc00 Author: Luis R. Rodriguez <lrodriguez@atheros.com> Date: Sat Jun 12 00:33:40 2010 -0400 ath9k_hw: fix clock rate calculations for ANI This commit accidentally broke clock rate calculation by doubling the calculated clock rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-30Merge branch 'master' of ↵David S. Miller2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-09-29pcmcia: remove obsolete and wrong commentsDominik Brodowski8-335/+1
What's worse than no comment? A wrong comment. Several PCMCIA device drivers contained the same comments, which were based on how the PCMCIA subsystem worked in the old days of 2.4., and which were originally part of a "dummy_cs" driver. These comments no longer matched at all what is happening now, and therefore should be removed. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: avoid messages on module (un)loadingDominik Brodowski4-20/+4
printk() statements on module load or unload are frowned upon. Also, add a few __init or __exit declarations. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: move driver name to struct pcmcia_driverDominik Brodowski9-27/+9
Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: remove the "Finally, report what we've done" messageDominik Brodowski2-25/+1
Remove this unnecessary message -- this info is either available in sysfs or by enabling dynamic debug from the PCMCIA core. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: linux-usb@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: use autoconfiguration feature for ioports and iomemDominik Brodowski6-178/+29
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: introduce autoconfiguration featureDominik Brodowski6-101/+16
Introduce an autoconfiguration feature to set certain values in pcmcia_loop_config(), instead of copying the same code over and over in each PCMCIA driver. At first, introduce the following options: CONF_AUTO_CHECK_VCC check or matching Vcc entry CONF_AUTO_SET_VPP set Vpp CONF_AUTO_AUDIO enable the speaker line CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: convert pcmcia_request_configuration to pcmcia_enable_deviceDominik Brodowski9-68/+23
pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: move config_{base,index,regs} to struct pcmcia_deviceDominik Brodowski4-4/+4
Several drivers prefer to explicitly set config_{base,index,regs}, formerly known as ConfigBase, ConfigIndex and Present. Instead of passing these values inside config_req_t, store it in struct pcmcia_device. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: simplify IntTypeDominik Brodowski9-9/+0
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO (all other drivers). As this flags seems to relate to ioport access, make it conditional to the driver having requested IO port access. There are two drivers which do not request IO ports, but did set INT_MEMORY_AND_IO: ray_cs and b43. For those, we consistently only set INT_MEMORY in future. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: simplify Status, ExtStatus register accessDominik Brodowski3-9/+3
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were only accessed to enable audio output for some drivers and IRQ for serial_cs.c. The former also required setting config_req_t.Attributes to CONF_ENABLE_SPKR; the latter can be simplified to setting this field to CONF_ENABLE_ESR. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: move Vpp setup to struct pcmcia_deviceDominik Brodowski5-15/+15
Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: do not use win_req_t when calling pcmcia_request_window()Dominik Brodowski3-33/+27
Instead of win_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem ranges. After a call to pcmcia_request_window(), the windows found there are reserved and may be used until pcmcia_release_window() is called. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-28iwl3945: queue the right work if the scan needs to be abortedFlorian Mickler2-2/+2
iwl3945's scan_completed calls into the mac80211 stack which triggers a warn on if there is no scan outstanding. This can be avoided by not calling scan_completed but abort_scan in iwl3945_request_scan in the done: branch of the function which is used as an error out. The done: branch seems to be an error-out branch, as, for example, if iwl_is_ready(priv) returns false the done: branch is executed. NOTE: I'm not familiar with the driver at all. I just quickly scanned as a reaction to https://bugzilla.kernel.org/show_bug.cgi?id=17722 the users of scan_completed in the iwl3945 driver and noted the odd discrepancy between the comment above this instance and the comment in mac80211 scan_completed function. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21Merge branch 'master' of ↵David S. Miller1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-09-17iwlwifi: do not perferm force reset while doing scanWey-Yi Guy1-0/+5
When uCode error condition detected, driver try to perform either rf reset or firmware reload in order bring device back to working condition. If rf reset is required and scan is in process, there is no need to issue rf reset since scan already reset the rf. If firmware reload is required and scan is in process, skip the reload request. There is a possibility firmware reload during scan cause problem. [ 485.804046] WARNING: at net/mac80211/main.c:310 ieee80211_restart_hw+0x28/0x62() [ 485.804049] Hardware name: Latitude E6400 [ 485.804052] ieee80211_restart_hw called with hardware scan in progress [ 485.804054] Modules linked in: iwlagn iwlcore bnep sco rfcomm l2cap crc16 bluetooth [last unloaded: iwlcore] [ 485.804069] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804072] Call Trace: [ 485.804079] [<c103019a>] warn_slowpath_common+0x60/0x75 [ 485.804084] [<c1030213>] warn_slowpath_fmt+0x26/0x2a [ 485.804089] [<c145da67>] ieee80211_restart_hw+0x28/0x62 [ 485.804102] [<f8b35dc6>] iwl_bg_restart+0x113/0x150 [iwlagn] [ 485.804108] [<c10415d5>] process_one_work+0x181/0x25c [ 485.804119] [<f8b35cb3>] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804124] [<c104190a>] worker_thread+0xf9/0x1f2 [ 485.804128] [<c1041811>] ? worker_thread+0x0/0x1f2 [ 485.804133] [<c10451b0>] kthread+0x64/0x69 [ 485.804137] [<c104514c>] ? kthread+0x0/0x69 [ 485.804141] [<c1002df6>] kernel_thread_helper+0x6/0x10 [ 485.804145] ---[ end trace 3d4ebdc02d524bbb ]--- [ 485.804148] WG> 1 [ 485.804153] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804156] Call Trace: [ 485.804161] [<c145da9b>] ? ieee80211_restart_hw+0x5c/0x62 [ 485.804172] [<f8b35dcb>] iwl_bg_restart+0x118/0x150 [iwlagn] [ 485.804177] [<c10415d5>] process_one_work+0x181/0x25c [ 485.804188] [<f8b35cb3>] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804192] [<c104190a>] worker_thread+0xf9/0x1f2 [ 485.804197] [<c1041811>] ? worker_thread+0x0/0x1f2 [ 485.804201] [<c10451b0>] kthread+0x64/0x69 [ 485.804205] [<c104514c>] ? kthread+0x0/0x69 [ 485.804209] [<c1002df6>] kernel_thread_helper+0x6/0x10 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-16net/wireless: use generic_file_llseek in debugfsArnd Bergmann7-0/+11
The default llseek operation is changing from default_llseek to no_llseek, so all code relying on the current behaviour needs to make that explicit. The wireless driver infrastructure and some of the drivers make use of generated debugfs files, so they cannot be converted by our script that automatically determines the right operation. All these files use debugfs and they typically rely on simple_read_from_buffer, so the best llseek operation here is generic_file_llseek. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds6-5/+8
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) pkt_sched: Fix lockdep warning on est_tree_lock in gen_estimator ipvs: avoid oops for passive FTP Revert "sky2: don't do GRO on second port" gro: fix different skb headrooms bridge: Clear INET control block of SKBs passed into ip_fragment(). 3c59x: Remove incorrect locking; correct documented lock hierarchy sky2: don't do GRO on second port ipv4: minor fix about RPF in help of Kconfig xfrm_user: avoid a warning with some compiler net/sched/sch_hfsc.c: initialize parent's cl_cfmin properly in init_vf() pxa168_eth: fix a mdiobus leak net sched: fix kernel leak in act_police vhost: stop worker only if created MAINTAINERS: Add ehea driver as Supported ath9k_hw: fix parsing of HT40 5 GHz CTLs ath9k_hw: Fix EEPROM uncompress block reading on AR9003 wireless: register wiphy rfkill w/o holding cfg80211_mutex netlink: Make NETLINK_USERSOCK work again. irda: Correctly clean up self->ias_obj on irda_bind() failure. wireless extensions: fix kernel heap content leak ...
2010-08-31ath9k_hw: fix parsing of HT40 5 GHz CTLsLuis R. Rodriguez2-2/+1
The 5 GHz CTL indexes were not being read for all hardware devices due to the masking out through the CTL_MODE_M mask being one bit too short. Without this the calibrated regulatory maximum values were not being picked up when devices operate on 5 GHz in HT40 mode. The final output power used for Atheros devices is the minimum between the calibrated CTL values and what CRDA provides. Cc: stable@kernel.org [2.6.27+] Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31ath9k_hw: Fix EEPROM uncompress block reading on AR9003Luis R. Rodriguez1-1/+1
The EEPROM is compressed on AR9003, upon decompression the wrong upper limit was being used for the block which prevented the 5 GHz CTL indexes from being used, which are stored towards the end of the EEPROM block. This fix allows the actual intended regulatory limits to be used on AR9003 hardware. Cc: stable@kernel.org [2.6.36+] Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30p54: fix tx feedback status flag checkChristian Lamparter1-1/+1
Michael reported that p54* never really entered power save mode, even tough it was enabled. It turned out that upon a power save mode change the firmware will set a special flag onto the last outgoing frame tx status (which in this case is almost always the designated PSM nullfunc frame). This flag confused the driver; It erroneously reported transmission failures to the stack, which then generated the next nullfunc. and so on... Cc: <stable@kernel.org> Reported-by: Michael Buesch <mb@bu3sch.de> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30ath5k: check return value of ieee80211_get_tx_rateJohn W. Linville1-0/+4
This avoids a NULL pointer dereference as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=625889 When the WARN condition is hit in ieee80211_get_tx_rate, it will return NULL. So, we need to check the return value and avoid dereferencing it in that case. Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: stable@kernel.org Acked-by: Bob Copeland <me@bobcopeland.com>
2010-08-27libertas: if_sdio: fix buffer alignment in struct if_sdio_cardMike Rapoport1-1/+1
The commit 886275ce41a9751117367fb387ed171049eb6148 (param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes) introduced new fields into the if_sdio_card structure. It caused missalignment of the if_sdio_card.buffer field and failure at driver load time: ~# modprobe libertas_sdio [ 62.315124] libertas_sdio: Libertas SDIO driver [ 62.319976] libertas_sdio: Copyright Pierre Ossman [ 63.020629] DMA misaligned error with device 48 [ 63.025207] mmci-omap-hs mmci-omap-hs.1: unexpected dma status 800 [ 66.005035] libertas: command 0x0003 timed out [ 66.009826] libertas: Timeout submitting command 0x0003 [ 66.016296] libertas: PREP_CMD: command 0x0003 failed: -110 Adding explicit alignment attribute for the if_sdio_card.buffer field fixes this problem. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds24-137/+174
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) netfilter: fix CONFIG_COMPAT support isdn/avm: fix build when PCMCIA is not enabled header: fix broken headers for user space e1000e: don't check for alternate MAC addr on parts that don't support it e1000e: disable ASPM L1 on 82573 ll_temac: Fix poll implementation netxen: fix a race in netxen_nic_get_stats() qlnic: fix a race in qlcnic_get_stats() irda: fix a race in irlan_eth_xmit() net: sh_eth: remove unused variable netxen: update version 4.0.74 netxen: fix inconsistent lock state vlan: Match underlying dev carrier on vlan add ibmveth: Fix opps during MTU change on an active device ehea: Fix synchronization between HW and SW send queue bnx2x: Update bnx2x version to 1.52.53-4 bnx2x: Fix PHY locking problem rds: fix a leak of kernel memory netlink: fix compat recvmsg netfilter: fix userspace header warning ...
2010-08-18iwlwifi: use long monitor timer for 5300 seriesWey-Yi Guy1-2/+2
For 5000 series of devices, use long monitor timer to check stuck tx queues. This modification apply to all the 5000 series including 5300 and others. Cc: stable@kernel.org [2.6.35] Reported-by: drago01 <drago01@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-18drivers/net/wireless: Restore upper case words in wiphy_<level> messagesJoe Perches13-50/+50
Commit c96c31e499b70964cfc88744046c998bb710e4b8 "(drivers/net/wireless: Use wiphy_<level>)" inadvertently changed some upper case words to lower case. Restore the original case. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds10-16/+48
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix a memmove bug in dev_gro_receive() net sched: fix some kernel memory leaks netfilter: {ip,ip6,arp}_tables: avoid lockdep false positive Revert "netlink: netlink_recvmsg() fix" ipv6: remove sysctl jiffies conversion on gc_elasticity and min_adv_mss xfrm: Use GFP_ATOMIC in xfrm_compile_policy ath5k: disable ASPM L0s for all cards ath9k_htc: load proper firmware for device ID 7015 wl1251: fix trigger scan timeout usage ath9k_htc: Fix disconnect issue in HT40 mode. ath9k_htc: fix panic on packet injection using airbase-ng tool. ipw2100: register pm_qos request before registering pci driver
2010-08-17iwlwifi: fix 3945 filter flagsJohannes Berg4-50/+94
Applying the filter flags directly as done since commit 3474ad635db371b0d8d0ee40086f15d223d5b6a4 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Apr 29 04:43:05 2010 -0700 iwlwifi: apply filter flags directly broke 3945 under some unknown circumstances, as reported by Alex. Since I want to keep the direct application of filter flags on iwlagn, duplicate the code into both 3945 and agn and remove committing the RXON that broke things from the 3945 version. Cc: stable@kernel.org [2.6.35] Reported-by: Alex Romosan <romosan@sycorax.lbl.gov> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-17ipw2100: don't sync status queue entriesJohn W. Linville1-8/+0
These are allocated with pci_alloc_consistent, so calling pci_dma_sync_single_for_cpu is incorrect usage of the API. Remove this misuse and consequently avoid the following backtrace: WARNING: at lib/dma-debug.c:902 check_sync+0xce/0x43a() Hardware name: 2373HU6 ipw2100 0000:02:02.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000034e88008] [size=8 bytes] Modules linked in: microcode ipw2100(+) snd_seq_device ppdev libipw nsc_ircc snd_pcm lib80211 video output irda parport_pc cfg80211 parport thinkpad_acpi e1000 iTCO_wdt crc_ccitt snd_timer iTCO_vendor_support snd i2c_i801 pcspkr rfkill soundcore joydev snd_page_alloc yenta_socket radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Tainted: G W 2.6.35-wl+ #8 Call Trace: [<c043aa42>] warn_slowpath_common+0x6a/0x7f [<c05d252a>] ? check_sync+0xce/0x43a [<c043aaca>] warn_slowpath_fmt+0x2b/0x2f [<c05d252a>] check_sync+0xce/0x43a [<c046189a>] ? print_lock_contention_bug+0x11/0xb2 [<c05d2b6f>] debug_dma_sync_single_for_cpu+0x47/0x49 [<c06cbd3c>] ? ehci_irq+0x31/0x331 [<f82a224a>] ? ipw2100_irq_tasklet+0x24/0x5e9 [ipw2100] [<f82a224a>] ? ipw2100_irq_tasklet+0x24/0x5e9 [ipw2100] [<f82a221d>] pci_dma_sync_single_for_cpu.clone.1+0x42/0x4b [ipw2100] [<f82a23a2>] ipw2100_irq_tasklet+0x17c/0x5e9 [ipw2100] [<c043fd87>] tasklet_action+0x78/0xcb [<c0440293>] __do_softirq+0xc4/0x183 [<c044038d>] do_softirq+0x3b/0x5f [<c04404d0>] irq_exit+0x3a/0x6d [<c0404423>] do_IRQ+0x8b/0x9f [<c04038b5>] common_interrupt+0x35/0x3c [<c062ecfa>] ? acpi_idle_enter_simple+0xfe/0x13c [<c045007b>] ? exit_itimers+0x2d/0x73 [<c062ecfc>] ? acpi_idle_enter_simple+0x100/0x13c [<c070bf10>] cpuidle_idle_call+0x78/0xdc [<c040251c>] cpu_idle+0x9b/0xb7 [<c07b1dd2>] rest_init+0xa6/0xab [<c0a4b96d>] start_kernel+0x389/0x38e [<c0a4b0c9>] i386_start_kernel+0xc9/0xd0 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-14iwlwifi: use long monitor timer to avoid un-necessary reloadWey-Yi Guy2-11/+11
For 5000 and 6000g2b series of devices, use long monitor timer to check stuck tx queues. .6000g2b series device, it is WiFi/BT combo device, there are some cases, tx queues are not move for a period of time because the WiFi/BT coex. .5000 series device, it is being reported firmware got reload more often than necessary, so extend the timer to avoid un-necessary reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-14iwlwifi: long monitor timerWey-Yi Guy6-29/+30
Change the name for monitor timer, also adding define for long monitor timer; long monitor timer can be used for the type of devices require longer time to determine the uCode is stuck on tx and needed reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-13ath5k: disable ASPM L0s for all cardsMaxim Levitsky1-0/+21
Atheros PCIe wireless cards handled by ath5k do require L0s disabled. For distributions shipping with CONFIG_PCIEASPM (this will be enabled by default in the future in 2.6.36) this will also mean both L1 and L0s will be disabled when a pre 1.1 PCIe device is detected. We do know L1 works correctly even for all ath5k pre 1.1 PCIe devices though but cannot currently undue the effect of a blacklist, for details you can read pcie_aspm_sanity_check() and see how it adjusts the device link capability. It may be possible in the future to implement some PCI API to allow drivers to override blacklists for pre 1.1 PCIe but for now it is best to accept that both L0s and L1 will be disabled completely for distributions shipping with CONFIG_PCIEASPM rather than having this issue present. Motivation for adding this new API will be to help with power consumption for some of these devices. Example of issues you'd see: - On the Acer Aspire One (AOA150, Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)) doesn't work well with ASPM enabled, the card will eventually stall on heavy traffic with often 'unsupported jumbo' warnings appearing. Disabling ASPM L0s in ath5k fixes these problems. - On the same card you would see a storm of RXORN interrupts even though medium is idle. Credit for root causing and fixing the bug goes to Jussi Kivilinna. Cc: David Quan <David.Quan@atheros.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13ath9k_htc: load proper firmware for device ID 7015Rajkumar Manoharan5-7/+11
This patch handles the firmware loading properly for device ID 7015. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13wl1251: fix trigger scan timeout usageYuri Kululin1-1/+1
Use appropriate command (CMD_TRIGGER_SCAN_TO) instead of scan command (CMD_SCAN) to configure trigger scan timeout. This was broken in commit 3a98c30f3e8bb1f32b5bcb74a39647b3670de275. This fix address the bug reported here: https://bugzilla.kernel.org/show_bug.cgi?id=16554 Cc: stable@kernel.org Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13ath9k_htc: Fix disconnect issue in HT40 mode.Vivek Natarajan1-1/+2
Some APs advertise that they may be HT40 capable in the capabilites but the current operating channel configuration may be only HT20. This causes disconnection as ath9k_htc sets WLAN_RC_40_FLAG despite the AP operating in HT20 mode. Hence set this flag only if the current channel configuration is HT40 enabled. Cc: stable@kernel.org Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds13-135/+88
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) ctcm: rename READ/WRITE defines to avoid redefinitions claw: rename READ/WRITE defines to avoid redefinitions phylib: available for any speed ethernet can: add limit for nframes and clean up signed/unsigned variables pkt_sched: Check .walk and .leaf class handlers pkt_sched: Fix sch_sfq vs tc_modify_qdisc oops caif-spi: Bugfix SPI_DATA_POS settings were inverted. caif: Bugfix - Increase default headroom size for control channel. net: make netpoll_rx return bool for !CONFIG_NETPOLL Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Bluetooth: Change default L2CAP ERTM retransmit timeout Bluetooth: Fix endianness issue with L2CAP MPS configuration net: Use NET_XMIT_SUCCESS where possible. isdn: mISDN: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed usbnet: rx_submit() should return an error code. pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles ...
2010-08-12Merge branch 'params' of ↵Linus Torvalds3-2/+36
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits) param: don't deref arg in __same_type() checks param: update drivers/acpi/debug.c to new scheme param: use module_param in drivers/message/fusion/mptbase.c ide: use module_param_named rather than module_param_call param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes. param: lock myri10ge_fw_name against sysfs changes. param: simple locking for sysfs-writable charp parameters param: remove unnecessary writable charp param: add kerneldoc to moduleparam.h param: locking for kernel parameters param: make param sections const. param: use free hook for charp (fix leak of charp parameters) param: add a free hook to kernel_param_ops. param: silence .init.text references from param ops Add param ops struct for hvc_iucv driver. nfs: update for module_param_named API change AppArmor: update for module_param_named API change param: use ops in struct kernel_param, rather than get and set fns directly param: move the EXPORT_SYMBOL to after the definitions. ...
2010-08-11ath9k_htc: fix panic on packet injection using airbase-ng tool.Rajkumar Manoharan1-5/+10
This should fix the oops which occurs during the packet injection on monitor interface. EIP is at ath9k_htc_tx_start+0x69/0x220 [ath9k_htc] [<f84dc8ea>] ? invoke_tx_handlers+0xa5a/0xee0 [mac80211] [<f82c84f4>] ? ath9k_htc_tx+0x44/0xe0 [ath9k_htc] [<f84db7b8>] ? __ieee80211_tx+0xf8/0x190 [mac80211] [<f84dce0d>] ? ieee80211_tx+0x9d/0x1a0 [mac80211] [<f84dcfac>] ? ieee80211_xmit+0x9c/0x1c0 [mac80211] [<f84dd1b5>] ? ieee80211_monitor_start_xmit+0x85/0xb0 [mac80211] [<c04c30cd>] ? dev_hard_start_xmit+0x1ad/0x210 [<c04b97c2>] ? __alloc_skb+0x52/0x130 [<c04d7cd5>] ? sch_direct_xmit+0x105/0x170 [<c04c5e9f>] ? dev_queue_xmit+0x37f/0x4b0 [<c0567e1e>] ? packet_snd+0x21e/0x250 [<c05684a2>] ? packet_sendmsg+0x32/0x40 [<c04b4c63>] ? sock_aio_write+0x113/0x130 [<c0207934>] ? do_sync_write+0xc4/0x100 [<c0167740>] ? autoremove_wake_function+0x0/0x50 [<c02f4414>] ? security_file_permission+0x14/0x20 [<c0207ad4>] ? rw_verify_area+0x64/0xe0 [<c01e6458>] ? handle_mm_fault+0x338/0x390 [<c0207cd5>] ? vfs_write+0x185/0x1a0 [<c058db20>] ? do_page_fault+0x160/0x3a0 [<c0208512>] ? sys_write+0x42/0x70 [<c01033ec>] ? syscall_call+0x7/0xb Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-11ipw2100: register pm_qos request before registering pci driverJohn W. Linville1-2/+3
It is necessary to call pm_qos_add_request prior to calling pm_qos_update_request. It was revealed that ipw2100 has been doing this wrong since "pm_qos: Get rid of the allocation in pm_qos_add_request()" (commit 82f682514a5df89ffb3890627eebf0897b7a84ec) added a WARN that results in the following backtrace: WARNING: at kernel/pm_qos_params.c:264 pm_qos_update_request+0x5e/0x70() pm_qos_update_request() called for unknown object Call Trace: [<c1024088>] ? warn_slowpath_common+0x78/0xb0 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1024153>] ? warn_slowpath_fmt+0x33/0x40 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<f89fe15f>] ? ipw2100_up+0x3f/0xf10 [ipw2100] [<c11961c9>] ? vsnprintf+0xc9/0x530 [<f89ff36c>] ? ipw2100_net_init+0x2c/0x1c0 [ipw2100] [<c12f542d>] ? register_netdevice+0x7d/0x3c0 [<f89f9b00>] ? ipw2100_irq_tasklet+0x910/0x9a0 [ipw2100] [<c12f579f>] ? register_netdev+0x2f/0x40 [<f89fd471>] ? ipw2100_pci_init_one+0xd21/0x1060 [ipw2100] [<c11a5ebb>] ? local_pci_probe+0xb/0x10 [<c11a6d49>] ? pci_device_probe+0x69/0x90 [<c1224704>] ? driver_probe_device+0x74/0x180 [<c10dd15a>] ? sysfs_create_dir+0x6a/0xb0 [<c1224889>] ? __driver_attach+0x79/0x80 [<c1224810>] ? __driver_attach+0x0/0x80 [<c1223fa2>] ? bus_for_each_dev+0x52/0x80 [<c1224586>] ? driver_attach+0x16/0x20 [<c1224810>] ? __driver_attach+0x0/0x80 [<c122395f>] ? bus_add_driver+0x17f/0x250 [<c11a5ec0>] ? pci_device_shutdown+0x0/0x20 [<c11a6c80>] ? pci_device_remove+0x0/0x40 [<c1224b13>] ? driver_register+0x63/0x120 [<c11a6f96>] ? __pci_register_driver+0x36/0xa0 [<f84f9048>] ? ipw2100_init+0x48/0x67 [ipw2100] [<c1001122>] ? do_one_initcall+0x32/0x170 [<c1087078>] ? __vunmap+0xb8/0xf0 [<f84f9000>] ? ipw2100_init+0x0/0x67 [ipw2100] [<c10510c1>] ? sys_init_module+0x161/0x1000 [<c108f847>] ? sys_close+0x67/0xe0 [<c13647c1>] ? syscall_call+0x7/0xb This patch moves pm_qos_add_request prior to pci_register_driver in ipw2100 in order to avoid this problem. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-11drivers/net/wireless/libertas/cfg.c: needs sched.hAndrew Morton1-0/+2
i386 allmodconfig: drivers/net/wireless/libertas/cfg.c: In function 'lbs_scan_worker': drivers/net/wireless/libertas/cfg.c:722: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) drivers/net/wireless/libertas/cfg.c: In function 'lbs_cfg_connect': drivers/net/wireless/libertas/cfg.c:1267: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'signal_pending' drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'schedule_timeout' So wait.h has a dependency on sched.h, but doesn't include sched.h. This patch doesn't fix that. Cc: Dan Williams <dcbw@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes.Rusty Russell1-2/+30
Since it can be changed via sysfs, we need to make a copy. This most generic way of doing this is to keep a flag so we know when to free it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
2010-08-11param: simple locking for sysfs-writable charp parametersRusty Russell2-0/+6
Since the writing to sysfs can free the old one, we need to block that when we access the charp variables. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Jing Huang <huangj@brocade.com> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: David S. Miller <davem@davemloft.net> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-usb@vger.kernel.org
2010-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds32-273/+836
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits) igbvf.txt: Add igbvf Documentation igb.txt: Add igb documentation e100/e1000*/igb*/ixgb*: Add missing read memory barrier ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG netxen: protect tx timeout recovery by rtnl lock isdn: gigaset: use after free isdn: gigaset: add missing unlock solos-pci: Fix race condition in tasklet RX handling pkt_sched: Fix sch_sfq vs tcf_bind_filter oops net: disable preemption before call smp_processor_id() tcp: no md5sig option size check bug iwlwifi: fix locking assertions iwlwifi: fix TX tracer isdn: fix information leak net: Fix napi_gro_frags vs netpoll path usbnet: remove noisy and hardly useful printk rtl8180: avoid potential NULL deref in rtl8180_beacon_work ath9k: Remove myself from the MAINTAINERS list libertas: scan before assocation if no BSSID was given libertas: fix association with some APs by using extended rates ...
2010-08-09iwlagn: fix rts cts protectionJohannes Berg11-133/+87
Currently the driver will try to protect all frames, which leads to a lot of odd things like sending an RTS with a zeroed RA before multicast frames, which is clearly bogus. In order to fix all of this, we need to take a step back and see what we need to achieve: * we need RTS/CTS protection if requested by the AP for the BSS, mac80211 tells us this * in that case, CTS-to-self should only be enabled when mac80211 tells us * additionally, as a hardware workaround, on some devices we have to protect aggregated frames with RTS To achieve the first two items, set up the RXON accordingly and set the protection required flag in the transmit command when mac80211 requests protection for the frame. To achieve the last item, set the rate-control RTS-requested flag for all stations that we have aggregation sessions with, and set the protection required flag when sending aggregated frames (on those devices where this is required). Since otherwise bugs can occur, do not allow the user to override the RTS-for-aggregation setting from sysfs any more. Finally, also clean up the way all these flags get set in the driver and move everything into the device-specific functions. Cc: stable@kernel.org [2.6.35] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-09libertas: fix build break by including linux/sched.hJohn W. Linville1-0/+1
CC [M] drivers/net/wireless/libertas/cfg.o /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c: In function ‘lbs_scan_worker’: /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:722: error: ‘TASK_NORMAL’ undeclared (first use in this function) /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c: In function ‘lbs_cfg_connect’: /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:1267: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function ‘signal_pending’ /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function ‘schedule_timeout’ Reported-by: Ben Greear <greearb@candelatech.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-26 16:16:49 +0000