summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2015-12-31prism54: fix checks for dma mapping errorsAlexey Khoroshilov3-5/+8
prism54 checks for dma mapping errors by comparison returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-31wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)Uri Mashiach1-3/+7
Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [<bf2581f0>] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [<bf2581f0>] (wl12xx_set_power_on [wlcore]) from [<bf25f7ac>] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [<bf25f7ac>] (wlcore_nvs_cb [wlcore]) from [<c04387ec>] (request_firmware_work_func+0x30/0x58) [ 23.685784] [<c04387ec>] (request_firmware_work_func) from [<c0058e2c>] (process_one_work+0x1b4/0x4b4) [ 23.695591] [<c0058e2c>] (process_one_work) from [<c0059168>] (worker_thread+0x3c/0x4a4) [ 23.704124] [<c0059168>] (worker_thread) from [<c005ee68>] (kthread+0xd4/0xf0) [ 23.711747] [<c005ee68>] (kthread) from [<c000f598>] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Cc: stable@vger.kernel.org Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-31wlcore/wl18xx: fw logger over sdioShahar Patury13-128/+177
Enable the FW Logger to work over the SDIO interface in addition to over UART interface. In the new design we use fw internal memory instead of packet ram that was used in older (wl12xx) design. This change reduces the impact on TP and stability. A new event was added to notify fw logger is ready for reading. Dynamic configuration to debugfs was added as well. Signed-off-by: Shahar Patury <shaharp@ti.com> Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl_pci: Fix kernel panicLarry Finger1-8/+3
In commit 38506ecefab9 (rtlwifi: rtl_pci: Start modification for new drivers), a bug was introduced that causes a NULL pointer dereference. As this bug only affects the infrequently used RTL8192EE and only under low-memory conditions, it has taken a long time for the bug to show up. The bug was reported on the linux-wireless mailing list and also at https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/ as bug #1527603 (kernel crashes due to rtl8192ee driver on ubuntu 15.10). Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rsi: bool tests do not need comparisonNicholas Mc Guire1-1/+1
This is an API consolidation only. Bool initializations should use true and false thus bool tests don't need an explicit comparison. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rsi: consolidate kmalloc/memset 0 calls to kzallocNicholas Mc Guire1-2/+1
This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: enable MSI interrupt support in pcieAvinash Patil2-8/+26
Newer pcie devices (8897 onwards) support MSI. This patch enables it. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: add missing check for PCIe8997 chipsetAmitkumar Karwar1-0/+1
This patch ensures mwifiex_pcie_txbd_empty() does take care of 8997 chipset. Fixes: 6d85ef00d9dfe ("mwifiex: add support for 8997 chipset") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix PCIe register information for 8997 chipsetAmitkumar Karwar1-4/+4
This patch corrects some information in mwifiex_pcie_card_reg() structure for 8997 chipset Fixes: 6d85ef00d9dfe ("mwifiex: add support for 8997 chipset") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix potential integer truncationchunfan chen2-4/+4
At some places, ie length is truncated from u16 to u8 while storing it to driver's internal variable. This patch fixes the problem. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192cu: Add missing parameter setupLarry Finger1-0/+2
This driver fails to copy the module parameter for software encryption to the locations used by the main code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192ce: Fix handling of module parametersLarry Finger1-0/+2
The module parameter for software encryption was never transferred to the location used by the driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192se: Fix module parameter initializationLarry Finger1-2/+4
Two of the module parameter descriptions show incorrect default values. In addition the value for software encryption is not transferred to the locations used by the driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192de: Fix incorrect module parameter descriptionsLarry Finger1-2/+2
Two of the module parameters are listed with incorrect default values. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8188ee: Fix module parameter initializationLarry Finger1-2/+5
In this driver, parameters disable_watchdog and sw_crypto are never copied into the locations used in the main code. While modifying the parameter handling, the copying of parameter msi_support is moved to be with the rest. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8821ae: Fix errors in parameter initializationLarry Finger1-4/+5
This driver failed to copy parameters sw_crypto and disable_watchdog into the locations actually used by the driver. In addition, msi_support was initialized three times and one of them used the wrong variable. The initialization of parameter int_clear was moved so that it is near that of the rest of the parameters. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8723ae: Fix initialization of module parametersLarry Finger1-0/+9
This driver has some errors in the handling of module parameters. These include missing initialization for parameters msi_support and disable_watchdog. In addition, neither of these parameters nor sw_crypto are transferred into the locations used by the driver. A final fix is adding parameter msi to the module named and description macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8723be: Fix module parameter initializationLarry Finger1-1/+7
This driver has a number of errors in the module initialization. These include the following: Parameter msi_support is stored in two places - one is removed. Paramters sw_crypto and disable_watchdog were never stored in the final locations, nor were they initialized properly. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix WPA connection problemchunfan chen1-22/+53
Device fails to connect to some AP's configured in WPA security mode. Currently IE buffer parsing logic in driver expects WPA IE to be present at the beginning of IE buffer. Otherwise connection is failed with 'incompatible network setting' error. This patch fixes the problem by improving IE buffer parsing logic. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: use world for unidentified region codeAmitkumar Karwar1-2/+2
It's better to use world if region code from EEPROM is unidentied instead of forcing it to FCC Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: update region_code_index arrayAmitkumar Karwar2-2/+2
This array contains list of supported region codes. It is changed to make it aligned with region code to country mapping table in driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix wake on disconnect featurechunfan chen1-2/+2
Default gpio and gap is downloaded to firmware while configuring host sleep for wake on disconnect. We may have gpio and gap modified by user. This patch fixes the problem. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix AMPDU not setup on TDLS link problemAmitkumar Karwar1-0/+10
Sometimes AP sends TDLS setup response as AMSDU packet. As driver doesn't parse it and update peer station's 11n capability in this case, AMPDU doesn't get setup. This patch calls mwifiex_process_tdls_action_frame() in AMSDU Rx path to fix the problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: add debugfs file for testing reset of cardAmitkumar Karwar1-0/+30
This provides an option for user to power cycle the card. It will be used to change the firmware without actually rebooting the system. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: remove redundant timestamp assignmentAmitkumar Karwar1-2/+0
During AMSDU aggregation, we are already using timestamp value of a first packet being aggregated. This patch removes redundant ktime_get_real() call. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: suppress "Rx of mgmt packet failed" messageAmitkumar Karwar2-3/+2
Block ACK action frames are dropped in driver. This error is expected in this case. Let's lower the priority of this message. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: abort cac in del_station() handlerXinming Hu1-0/+5
When hostapd is killed with Ctrl+C before cac get completed, stop_ap handler will not be called, thus priv->wdev.cac_started flag remains set. Hostapd restart attempt will be failed in this case with device busy error. This patch aborts cac in del_station handler to handle this corner case. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: increase supported wowlan pattern lengthXinming Hu1-1/+1
Maximum supported wowlan pattern length has been increased from 20 to 40. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix bug for wildcard-prefix wowlan patternXinming Hu1-0/+6
Wildcard prefix bytes are ignored while downloading packet pattern to firmware. As packet offset is not adjusted accordingly firmware end up matching the pattern at wrong offset. The packet offset is corrected in this patch. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: advertise SMS4 cipher suiteZhaoyang Liu1-0/+1
This is needed to support WAPI functionality. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: multiple bss supportShengzhen Li3-17/+51
This patch fixes issues observed while starting 3 different bss simultaneously, eg, 2 AP + 1 STA or 3 AP Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: change ap and station interface limitsShengzhen Li1-5/+3
ap/station interface limit has been changed to allow creating maximum 3 interfaces. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-29Merge tag 'iwlwifi-next-for-kalle-2015-12-21' of ↵Kalle Valo82-715/+2224
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * Make scan parameters low latency aware (Avi Stern) * Fix in the NL80211_FEATURE_FULL_AP_CLIENT_STATE state case (Ayala) * Fix enable injection mode (Chaya Rachel) * Various cleanups (Dan / Julia / myself) * Allow to stay more time on popular channels (David Spinadel) * Bug fixes for D0i3 (Eliad / Luca) * Fixes for GO uAPSD (myself) * Start of TSO support (myself) * Rate control bug fixes (Eyal / Gregory) * Start the work on 9000 devices (Johannes / Sara / Oren) * Start the work on a new Tx queue allocation model (Liad) * Debug infrastructure enhancements (Golan)
2015-12-21iwlwifi: bail out in case of bad trans stateEliad Peller1-6/+18
In case of bad trans state (i.e. fw is not loaded) bail out immediately instead of calling the trans, which might not be fully initialized yet. Also add WARN_ON_ONCE to help debugging where the errorneous call is coming from. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-21iwlwifi: fix printf specifierEmmanuel Grumbach1-2/+2
Smatch warned about a bad specifier being used. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-21iwlwifi: remove unused parameter from grab_nic_accessEmmanuel Grumbach7-32/+28
All the callers used silent = false. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: update key params on d0i3 entrance/exitEliad Peller4-45/+136
In order to let the fw do offloading properly, we need to provide various key data (e.g. PN). Configure the params on d0i3 entrance, and update them back on d0i3 exit. Since d3 code is now called in d0i3 which requires runtime pm only, make d3.0 depend on CONFIG_PM (rather than CONFIG_PM_SLEEP), and add required #ifdefs and wrappers where needed, so both CONFIG_PM=n and CONFIG_PM_RUNTIME=n configurations will build correctly. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: Change number of associated stations when station becomes ↵Ayala Beker2-11/+8
associated Currently, the number of associated stations gets updated when adding a new station or removing it. This is incorrect as it's possible that a station was inserted before it was associated Fix this by increasing/decreasing ap_assoc_sta_count whenever a station transitions in/out the associated state. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: Update PCI IDs for 8000 and 9000 seriesOren Givon1-5/+6
A new PCI IDs update to the 8000 and 9000 series. type=feature Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: dump more registers upon errorEmmanuel Grumbach1-13/+16
These registers can help to debug PHY issues. Since this adds a significant amount of work to the debug collection phase, dump the periphery registers only if the firmware is stopped. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: infrastructure for frame-release messageSara Sharon4-1/+17
Incoming hardware will send frame release notifications to the reorder buffer in order to update with the BA session status and up to date NSSN. This patch enables the API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: add 9000 series RX processingJohannes Berg5-4/+385
Convert the convert the new infrastructure added by previous patches to actually use the new RX descriptor layout. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: change iwl_mvm_get_key_sta_id() to return the stationJohannes Berg1-31/+22
The code in iwl_mvm_update_tkip_key() is now pretty much duplicated with the code in iwl_mvm_get_key_sta_id() doing the station ID lookup again after it was already done. Change iwl_mvm_get_key_sta_id() to iwl_mvm_get_key_sta(), returning the mvm_sta pointer, to allow that duplicate code to be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: Add a station in monitor modeChaya Rachel Ivgi5-4/+58
Currently when creating a new vif in monitor mode the driver doesn't allocate a specific station. This causes that in the situation that tx traffic is injected, the tx queues are not scheduled, with the result of a TFD queue hang. Fix that by allocating a station and ensuring its tx queues are scheduled. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=104591 Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: add extended dwell timeDavid Spinadel2-18/+45
When doing active scan on crowded channels we are likely to miss probe responses due to collisions. To overcome this issue we use an extended dwell time on channels 1, 6 and 11; this dwell time is set to 100. In case of fragmented scan extended dwell time is the maximum out of channel time - 44 msec. Fragmented active scan will be addressed later. Extended dwell time isn't used in sched scan or p2p find. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: small update in the firmware APIEmmanuel Grumbach1-1/+9
Small change in firmware API, no functional change. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: support description for user triggered fw dbg collectionGolan Ben-Ami1-2/+3
Add to the user triggered fw debug collection support for describing the reason of the trigger. This could be useful for identifying a dump by a unique id, passed as a description. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: enable L3 filteringSara Sharon3-3/+15
Firmware will support filtering multicast L3 packets. The L3 filtering is configured by the WOWLAN_CONFIG command. All flags should be enabled by default. Older firmware is not affected as it does not look into this field. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: refactor the way fw_key_table is handledLuca Coelho3-6/+8
Instead of keeping the fw_key_table bits set when the keys are removed (i.e. in D3 entry or HW_RESTART flows), clear them and set them again only when the keys have been successfully re-added. This makes the bitmask more closely tied to the actual firmware programming. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: 9000: increase the number of queuesEmmanuel Grumbach1-1/+1
9000 family devices have 31 queues. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 23:33:56 +0000