summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ralink
AgeCommit message (Collapse)AuthorFilesLines
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-04-23net: remove third argument of usb_maxpacket()Vincent Mailhol1-2/+2
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Oliver Neukum <oliver@neukum.org> CC: David S. Miller <davem@davemloft.net> CC: Jakub Kicinski <kuba@kernel.org> CC: Woojung Huh <woojung.huh@microchip.com> CC: Felix Fietkau <nbd@nbd.name> CC: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> CC: Ryder Lee <ryder.lee@mediatek.com> CC: Kalle Valo <kvalo@kernel.org> CC: Matthias Brugger <matthias.bgg@gmail.com> CC: Stanislaw Gruszka <stf_xl@wp.pl> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-6-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R2-5/+5
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-29rt2x00: do not mark device gone on EPROTO errors during startStanislaw Gruszka1-0/+3
As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se/ Reported-and-tested-by: Exuvo <exuvo@exuvo.se> Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211111141003.GA134627@wp.pl
2021-09-21rt2x00: remove duplicate USB device IDKrzysztof Kozlowski1-1/+0
The device 0x043e,0x7a32 is already on the list under CONFIG_RT2800USB_RT55XX. Since it is the sole Arcadyan entry in RT55xx, assume the proper chip is RT55xx, not RT53xx, although this was not confirmed by testing or 3rd party sources. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210917092108.19497-3-krzysztof.kozlowski@canonical.com
2021-06-15rt2x00: do not set timestamp for injected framesStanislaw Gruszka1-2/+3
We setup hardware to insert TSF timestamp for beacon and probe response frames. This is undesired for injected frames, which might want to set their own timestamp values, so disable this setting for injected frames. Tested-by: ZeroBeat <ZeroBeat@gmx.de> Tested-by: n0w1re <n0w1re@protonmail.ch> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210504081220.666939-1-stf_xl@wp.pl
2021-06-15rt2x00: remove leading spaces before tabsHui Tang1-1/+1
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621407345-10625-3-git-send-email-tanghui20@huawei.com
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle1-5/+1
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky7-8/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-08rt2800usb: add Sweex LW163V2 id'sStanislaw Gruszka1-0/+1
Add support for Sweex LW163V2 device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204101902.199590-1-stf_xl@wp.pl
2021-02-08rt2x00: remove duplicate word and fix typo in commentwengjianfeng1-1/+1
remove duplicate word 'we' in comment change 'then' to 'than' in comment Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204005119.18060-1-samirweng1979@163.com
2020-12-08rt2x00: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b0d4c50b803bc38ed370521b9b0a44365cae9386.1605896060.git.gustavoars@kernel.org
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of ↵Jakub Kicinski2-16/+56
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11rt2x00: remove WDS codeJohannes Berg3-8/+2
The ability to reach this code was hidden behind CONFIG_WIRELESS_WDS, which was just removed. Clean up the driver accordingly. Link: https://lore.kernel.org/r/20201109105103.c3248409e449.I74954b87e5bdd23c99a5314d2b265889292a6cb5@changeid Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-07rt2x00: save survey for every channel visitedMarkov Mikhail2-16/+56
rt2800 only gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registered https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru> sgruszka: remove unused variable Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201104142524.94375-1-stf_xl@wp.pl
2020-08-27rt2x00: convert tasklets to use new tasklet_setup() APIAllen Pais7-43/+54
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200817090637.26887-15-allen.cryptic@gmail.com
2020-08-27rt2x00: Use fallthrough pseudo-keywordGustavo A. R. Silva7-28/+24
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821062052.GA8618@embeddedor
2020-08-02rt2x00: pci: use generic power managementVaibhav Gupta10-46/+19
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. The callbacks make use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. The .suspend() callback is invoking rt2x00lib_suspend() which needs to be modified as generic rt2x00pci_suspend() has no pm_message_t type argument, passed to it, which is required by it according to its declaration. Although this variable remained unused in the function body. Hence, remove it from the function definition & declaration. rt2x00lib_suspend() is also invoked by rt2x00usb_suspend() and rt2x00soc_suspend(). Thus, modify the functional call accordingly in their function body. Earlier, .suspend() & .resume() were exported and were used by the following drivers: - drivers/net/wireless/ralink/rt2x00/rt2400pci.c - drivers/net/wireless/ralink/rt2x00/rt2500pci.c - drivers/net/wireless/ralink/rt2x00/rt2800pci.c - drivers/net/wireless/ralink/rt2x00/rt61pci.c Now, we only need to bind "struct dev_pm_ops" variable to "struct pci_driver". Thus, make the callbacks static. Declare an "extern const struct dev_pm_ops" variable and bind PM callbacks to it. Now, export the variable instead and use it in respective drivers. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717110928.454867-1-vaibhavgupta40@gmail.com
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2-22/+22
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-29rt2800: enable MFP support unconditionallyRui Salvaterra2-4/+3
This gives us WPA3 support out of the box without having to manually disable hardware crypto. The driver will fall back to software crypto if the connection requires management frame protection. Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200525134906.1672-1-rsalvaterra@gmail.com
2019-12-18rt2x00usb: Fix a warning message in 'rt2x00usb_watchdog_tx_dma()'Christophe JAILLET1-1/+1
'forced' is duplicated in the message, axe one of them. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rt2x00: use RESET state bit to prevent IV changes on restartStanislaw Gruszka1-12/+9
We can not set IV when we are under reset. Previously we read previous IV value from registers and zeroed IV registers when key was deleted, but this could possibly not work if DEL_KEY command was not performed. Now when we have ->reconfig_complete ops and we fully mark mac80211 reset state via DEVICE_STATE_RESET flag, we can just skip setting IV when keys are set during reset. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rt2x00: implement reconfig_completeStanislaw Gruszka6-11/+25
mac80211 has .reconfig_complete that can be used as indicator of HW restart end. This will allow to configure keys/IV differently for HW restart and normal configuration. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-21drivers: net: Fix Kconfig indentation, continuedKrzysztof Kozlowski1-22/+22
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06rt2800: remove errornous duplicate conditionDaniel Golle1-4/+1
On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@jify.de> Reported-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+1
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-08rt2x00: remove input-polldev.h headerDmitry Torokhov1-1/+0
The driver does not use input subsystem so we do not need this header, and it is being removed, so stop pulling it in. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-04mac80211: simplify TX aggregation startJohannes Berg1-2/+2
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-02rt2x00: initialize last_resetStanislaw Gruszka1-1/+1
Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not possible to test H/W reset for first 5 minutes of system run. Fixes: e403fa31ed71 ("rt2x00: add restart hw") Reported-and-tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-26drivers: net: Fix Kconfig indentationKrzysztof Kozlowski1-12/+12
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-19/+18
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-03Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"Stanislaw Gruszka1-12/+6
This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Cc: <stable@vger.kernel.org> # v5.1+ Reported-and-tested-by: Sergey Maranchuk <slav0nic0@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rt2x00: clear up IV's on key removalStanislaw Gruszka1-7/+12
After looking at code I realized that my previous fix 95844124385e ("rt2x00: clear IV's on start to fix AP mode regression") was incomplete. We can still have wrong IV's after re-keyring. To fix that, clear up IV's also on key removal. Fixes: 710e6cc1595e ("rt2800: do not nullify initialization vector data") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> tested-by: Emil Karlson <jekarl@iki.fi> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rt2x00: do not set IEEE80211_TX_STAT_AMPDU_NO_BACK on tx statusStanislaw Gruszka1-3/+0
According to documentation IEEE80211_TX_STAT_AMPDU_NO_BACK is suppose to be used when we do not recive BA (BlockAck). However on rt2x00 we use it when remote station fail to decode one or more subframes within AMPDU (some bits are not set in BlockAck bitmap). Setting the flag result in sent of BAR (BlockAck Request) frame and this might result of abuse of BA session, since remote station can sent BA with incorrect sequence numbers after receiving BAR. This problem is visible especially when connecting two rt2800 devices. Previously I observed some performance benefits when using the flag when connecting with iwlwifi devices. But currently possibly due to reacent changes in rt2x00 removing the flag has no effect on those test cases. So remove the IEEE80211_TX_STAT_AMPDU_NO_BACK. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-5/+18
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20rt2x00: clear IV's on start to fix AP mode regressionStanislaw Gruszka3-5/+18
To do not brake HW restart we should keep initialization vectors data. I assumed that on start the data is already initialized to zeros, but that not true on some scenarios and we should clear it. So add additional flag to check if we are under HW restart and clear IV's data if we are not. Patch fixes AP mode regression. Reported-and-tested-by: Emil Karlson <jekarl@iki.fi> Fixes: 710e6cc1595e ("rt2800: do not nullify initialization vector data") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06rt2800usb: Add new rt2800usb device PLANEX GW-USMicroNMasanari Iida1-0/+1
This patch add a device ID for PLANEX GW-USMicroN. Without this patch, I had to echo the device IDs in order to recognize the device. # lsusb |grep PLANEX Bus 002 Device 005: ID 2019:ed14 PLANEX GW-USMicroN Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-24rt2x00: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-101/+35
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because we don't need to save the individual debugfs files and directories, remove the local storage of them and just remove the entire debugfs directory in a single call, making things a lot simpler. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-24rt2x00usb: remove unnecessary rx flag checksSoeren Moch1-6/+3
In contrast to the TX path, there is no need to separately read the transfer status from the device after receiving RX data. Consequently, there is no real STATUS_PENDING RX processing queue entry state. Remove the unnecessary ENTRY_DATA_STATUS_PENDING flag checks from the RX path. Also remove the misleading comment about reading RX status from device. Suggested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-15rt2x00usb: fix rx queue hangSoeren Moch1-6/+6
Since commit ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") the handler rt2x00usb_interrupt_rxdone() is not running with interrupts disabled anymore. So this completion handler is not guaranteed to run completely before workqueue processing starts for the same queue entry. Be sure to set all other flags in the entry correctly before marking this entry ready for workqueue processing. This way we cannot miss error conditions that need to be signalled from the completion handler to the worker thread. Note that rt2x00usb_work_rxdone() processes all available entries, not only such for which queue_work() was called. This patch is similar to what commit df71c9cfceea ("rt2x00: fix order of entry flags modification") did for TX processing. This fixes a regression on a RT5370 based wifi stick in AP mode, which suddenly stopped data transmission after some period of heavy load. Also stopping the hanging hostapd resulted in the error message "ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush". Other operation modes are probably affected as well, this just was the used testcase. Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: do not enable watchdog by defaultStanislaw Gruszka3-3/+12
Make watchdog disabled by default and add module parameter to enable it. User will have to create file in /etc/modprobe.d/ with options rt2800lib watchdog=1 to enable the watchdog or load "rt2800lib watchdog=1" module manually before loading rt2800{soc,pci,usb} module. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2x00: add restart hwStanislaw Gruszka4-2/+54
Add ieee80211_restart_hw() to watchdog and debugfs file for testing if restart works as expected. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: do not nullify initialization vector dataStanislaw Gruszka1-5/+4
If we restart hw we should keep existing IV (initialization vector) otherwise HW encryption will be broken after restart. Also fix some coding style issues on the way. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: add pre_reset_hw callbackStanislaw Gruszka6-0/+24
Add routine to cleanup interfaces data before hw reset as ieee80211_restart_hw() will do setup interfaces again. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: initial watchdog implementationStanislaw Gruszka6-0/+67
Add watchdog for rt2800 devices. For now it only detect hung and print error. [Note: I verified that printing messages from process context is fine on MT7620 (WT3020) platform that have problem when printk is called from interrupt context]. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: add helpers for reading dma done indexStanislaw Gruszka6-0/+52
For mmio we do not properlly trace dma done Q_INDEX_DMA_DONE index for TX queues. That would require implementing INT_SOURCE_CSR_*_DMA_DONE interrupts, what is rather not worth to do due to adding extra CPU load (small but still somewhat not necessary otherwise). We can just read TX DMA done indexes from registers directly. What will be used by watchdog. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2x00: allow to specify watchdog intervalStanislaw Gruszka2-4/+10
Allow subdriver to change watchdog interval by intialize link->watchdog_interval value before rt2x00link_register(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner44-531/+44
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner3-0/+3
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05net: wireless: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 09:12:05 +0000