| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2020-01-26 | qtnfmac: control qtnfmac wireless interfaces bridging | Sergey Matyukevich | 1 | -18/+34 | |
| Bridging qtnfmac interfaces is possible only if the following two conditions are fulfilled: - firmware advertises proper support with QLINK_HW_CAPAB_HW_BRIDGE - kernel is built with CONFIG_NET_SWITCHDEV support Otherwise adding qtnfmac wireless interfaces into the same bridge should not be allowed since packets flooded by kernel may break internal forwarding rules between interfaces. This patch disables adding qtnfmac wireless interfaces into the same bridge if no support is provided either by card or by kernel. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2020-01-26 | qtnfmac: add module param to configure DFS offload | Sergey Matyukevich | 6 | -7/+22 | |
| Firmware may support DFS offload. However the final decision on whether to use it or not should be up to the user. So even if firmware supports DFS offload, it should be enabled only if user explicitly requests it. For this purpose introduce kernel param dfs_offload which is disabled by default. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2020-01-26 | qtnfmac: cleanup slave_radar access function | Sergey Matyukevich | 3 | -7/+7 | |
| Currently this parameter is global, it is not specific to mac. So this function does not need any input parameters. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-12-12 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 1 | -1/+1 | |
| This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-11-20 | qtnfmac: process HE capabilities requests | Mikhail Karpenko | 2 | -1/+92 | |
| Pass HE interface type data requests between firmware and driver. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-20 | qtnfmac: add TLV for extension IEs | Mikhail Karpenko | 1 | -0/+35 | |
| Extension information elements have additional field for ID. This commit adds TLV for such elements and a structure for interface HE capabilities communication with firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-20 | qtnfmac: signal that all packets coming from device are already flooded | Igor Mitsyanko | 2 | -0/+27 | |
| Firmware floods all packets that need to be flooded (multicast, broadcast, unknown unicast) as required. Tell kernel bridge subsystem it does not need to flood packet itself by marking each incoming frame with skb->offload_fwd_mark flag. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-20 | qtnfmac: advertise netdev port parent ID | Igor Mitsyanko | 4 | -5/+22 | |
| Use MAC address of the first active radio as a unique device ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-20 | qtnfmac: add interface ID to each packet | Igor Mitsyanko | 4 | -18/+74 | |
| Add interface ID information to the tail of each transmitted packet so that firmware can know to which interface the packet belongs to. This is only needed if device supports HW switch capability. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-20 | qtnfmac: track broadcast domain of each interface | Igor Mitsyanko | 7 | -0/+149 | |
| If firmware reports that it supports hardware switch capabilities, driver needs to track and notify device whenever broadcast domain of a particular network device changes (ie. whenever it's upper master device changes). Firmware needs a unique ID to tell broadcast domains from each other which is an opaque number otherwise. For that purpose we can use netspace:ifidx pair to uniquely identify each broadcast domain: - if netdev is not part of a bridge, then use it's own ifidx as a broadcast domain ID - if netdev is part of a bridge, then use bridge netdev ifidx as broadcast domain ID Firmware makes sure that packets are only forwarded between interfaces marked with the same broadcast domain ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-20 | qtnfmac: remove VIF in firmware in case of error | Igor Mitsyanko | 2 | -15/+12 | |
| Currently in case of error when registering network device with the kernel, we won't properly cleanup VIF state in firmware due to DEL_VIF command will not be send to wifi card. Make sure it does. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: add support for getting/setting transmit power | Mikhail Karpenko | 4 | -0/+151 | |
| Add new command for getting/setting current transmit power and propagate requests from user space to firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: handle MIC failure event from firmware | Sergey Matyukevich | 2 | -0/+55 | |
| Report MIC failure from firmware to cfg80211 subsystem using dedicated callback cfg80211_michael_mic_failure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: send EAPOL frames via control path | Sergey Matyukevich | 5 | -20/+14 | |
| Send EAPOL frames via control path so they can be treated in a different way rather than normal data frames. In this case EAPOLs are sent with higher priority and with disabled aggregation and encryption. Besides, all devices benefit from sending EAPOL frames via high priority path, so move the functionality from chip specific to common code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: modify Rx descriptors queue setup | Sergey Matyukevich | 4 | -23/+41 | |
| Rx descriptors queue length is hardware specific. Current common default value is no more than an accident. So move Rx descriptor queue setup to platform PCIe backend in the same way as it is already done for Tx. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: fix invalid channel information output | Sergey Matyukevich | 1 | -3/+4 | |
| Do not attempt to print frequency for an invalid channel provided by firmware. That channel may simply not exist. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: fix debugfs support for multiple cards | Sergey Matyukevich | 1 | -1/+5 | |
| Fix merge artifact for commit 0b68fe10b8e8 ("qtnfmac: modify debugfs to support multiple cards") and finally add debugfs support for multiple qtnfmac wireless cards. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-11-14 | qtnfmac: fix using skb after free | Sergey Matyukevich | 1 | -2/+4 | |
| KASAN reported use-after-free error: [ 995.220767] BUG: KASAN: use-after-free in qtnf_cmd_send_with_reply+0x169/0x3e0 [qtnfmac] [ 995.221098] Read of size 2 at addr ffff888213d1ded0 by task kworker/1:1/71 The issue in qtnf_cmd_send_with_reply impacts all the commands that do not need response other then return code. For such commands, consume_skb is used for response skb and right after that return code in response skb is accessed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-10-15 | wireless: Remove call to memset after dma_alloc_coherent | Fuqian Huang | 2 | -4/+0 | |
| In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-08-06 | qtnfmac_pcie: Use dev_get_drvdata | Chuhong Yuan | 1 | -2/+2 | |
| Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-06-25 | qtnfmac: Use struct_size() in kzalloc() | Gustavo A. R. Silva | 1 | -3/+2 | |
| One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct ieee80211_regdomain { ... struct ieee80211_reg_rule reg_rules[]; }; instance = kzalloc(sizeof(*mac->rd) + sizeof(struct ieee80211_reg_rule) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, reg_rules, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-05-21 | treewide: Add SPDX license identifier - Makefile/Kconfig | Thomas Gleixner | 2 | -0/+2 | |
| Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||||
| 2019-04-26 | qtnfmac: modify debugfs to support multiple cards | Sergey Matyukevich | 3 | -1/+30 | |
| This patch modifies location of debugfs entries and their naming conventions to support multiple wireless cards on pcie host. Selected approach is to use separate directories for different wireless cards in top-level qtnfmac debugfs directory. Here is an example that clarifies the chosen naming conventions: $ sudo ls /sys/kernel/debug/qtnfmac/ qtnfmac_pcie:0000:01:00.0 Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-26 | qtnfmac: allow to control DFS slave radar detection | Igor Mitsyanko | 6 | -4/+19 | |
| In ETSI region DFS slave device can operate in two modes on DFS channels: - do on-channel radar detection and use higher Tx power - don't do radar detection and use lower Tx power as a consequence Allow user to control that behavior through qtnfmac module parameter. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-26 | qtnfmac: handle channel switch events for connected stations only | Sergey Matyukevich | 1 | -5/+11 | |
| Channel switch events from firmware should be processed only when STA is already connected to BSS. On connect this notification is not needed since full BSS info will be supplied by cfg80211_connect_result. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: replace qtnf_cmd_acl_data_size() with struct_size() | Gustavo A. R. Silva | 1 | -11/+4 | |
| One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); or instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Based on the above, replace qtnf_cmd_acl_data_size() with the new struct_size() helper. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: use scan duration param for different scan types | Igor Mitsyanko | 2 | -11/+49 | |
| Use scan duration param for both active and passive scan dwell times. Document what different types of dwell times are used for. Explicitly specify that if unset, automatic selection by device firmware will be used. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: send EAPOL frames via control path | Igor Mitsyanko | 10 | -25/+89 | |
| Use control path to send EAPOL frames to make sure they are sent with higher priority with aggregation disabled. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: allow changing the netns | Sergey Matyukevich | 1 | -1/+2 | |
| Allow to change netns for wireless interfaces created by qtnfmac driver. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: simplify firmware state tracking | Sergey Matyukevich | 4 | -15/+30 | |
| This patch streamlines firmware state tracking. In particular, state QTNF_FW_STATE_FW_DNLD_DONE is removed, states QTNF_FW_STATE_RESET and QTNF_FW_STATE_DETACHED are merged into a single state. Besides, new state QTNF_FW_STATE_RUNNING is introduced to distinguish between the following two cases: - firmware load succeeded, firmware init process is ongoing - firmware init succeeded, firmware is fully functional Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: fix core attach error path in pcie backend | Sergey Matyukevich | 4 | -39/+34 | |
| Report that firmware is up and running only for successful firmware download. Simplify qtnf_pcie_fw_boot_done: modify error path so that no need to pass firmware dowload result to this function. Finally, do not create debugfs entries if firmware download succeeded, but core attach failed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: update bands information on CHANGE_INTF command | Igor Mitsyanko | 1 | -2/+19 | |
| In some regions, different regulatory limits (like max Tx power) may be defined for different operating modes. As an example: in ETSI regions DFS master devices may use higher transmit powers compared to DFS slave devices. Update bands information in CHANGE_INTF command if mode of operation changes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: pass DFS region to firmware on region update | Igor Mitsyanko | 2 | -2/+19 | |
| Pass DFS region as requested by regulatory core directly to firmware so it can initialize radar detection block accordingly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: allow each MAC to specify its own regulatory rules | Igor Mitsyanko | 7 | -156/+156 | |
| Currently driver uses the same regulatory rules to register all wiphy instances. This is not logically correct since each wiphy may have different capabilities (different supported bands, EIRP etc). Allow firmware to pass regulatory rules for each MAC separately. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: flexible regulatory domain registration logic | Igor Mitsyanko | 1 | -5/+14 | |
| Use REGULATORY_CUSTOM_REG flag only if firmware advertised a custom regulatory domain prior to wiphy registration. Use REGULATORY_STRICT_REG flag only if firmware knows its regulatory domain. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: pass complete channel info in regulatory notifier | Igor Mitsyanko | 3 | -31/+76 | |
| Currently only a portion of per-channel information is passed to firmware. Extend logic to pass all useful per-channel data. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: include full channels info to regulatory notifier | Igor Mitsyanko | 2 | -1/+27 | |
| Before regulatory notifier is invoked by a wireless core, it will update band information for the wiphy. Pass this information to firmware together with new region alpha2 code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: simplify error reporting in regulatory notifier | Igor Mitsyanko | 1 | -10/+2 | |
| Error reporting in qtnf_cfg80211_reg_notifier only requires to print one type of message and an error code. Firmware will report success for an attempt to set regulatory region to the same value, so no special handling is required for this case. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-04-04 | qtnfmac: make regulatory notifier work on per-phy basis | Igor Mitsyanko | 3 | -30/+13 | |
| Wireless core calls regulatory notifier for each wiphy and it only guarantees that bands info is updated for this particular wiphy prior to calling a notifier. Hence updating all wiphy which belong to driver in a single notifier callback is redundant and incorrect. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-08 | qtnfmac: enable WPA3 SAE support | Sergey Matyukevich | 5 | -2/+145 | |
| In the case of SAE AP, drivers offload authentication to user-space software, e.g. hostapd. For FullMAC drivers the procedure is as follows. If auth_type is SAE and user space indicates external authentication capability, then driver requests authentication offload to user-space software using cfg80211_external_auth_request call. From that point, auth frame exchange is performed transparently for driver: user-space software sends/receives mgmt frames using mgmt_tx/mgmt_frame_register cfg80211 callbacks. As soon as authenitcation is completed, user-space software notifies driver about its status using external_auth cfg80211 callback. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-08 | qtnfmac: enable WPA3 OWE support | Sergey Matyukevich | 2 | -43/+102 | |
| In the case of OWE, STA should be able to pass DH IEs from AP assoc responses to wpa_s for processing. For this purpose DH IEs are received from firmware in BSS_JOIN events and passed to wireless core and then to wpa_s as additional optional rsp_ies parameter for cfg80211_connect_result. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: no need to check return value of debugfs_create functions | Greg Kroah-Hartman | 1 | -13/+1 | |
| When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Igor Mitsyanko <imitsyanko@quantenna.com> Cc: Avinash Patil <avinashp@quantenna.com> Cc: Sergey Matyukevich <smatyukevich@quantenna.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: qtnf_cmd_send_with_reply cleanup | Sergey Matyukevich | 1 | -6/+4 | |
| Use existing variable with dereferenced cmd_id field. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: remove unused declarations | Sergey Matyukevich | 1 | -2/+0 | |
| Remove declarations for inexistent functions from bus.h header. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: add missing bss record to host scan cache | Sergey Matyukevich | 2 | -5/+78 | |
| Make sure that valid BSS entry exists in wireless core record even in the case of successful connect reported by firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: convert to SPDX license identifiers | Sergey Matyukevich | 23 | -327/+45 | |
| Replace textual license with SPDX-License-Identifier. Add an SPDX-License-Identifier for the Makefile. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: do not reject retry changes in driver | Sergey Matyukevich | 2 | -5/+8 | |
| Do not reject RETRY changes in driver. This decision should belong to firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: switch to 32bit values for RTS/FRAG thresholds | Sergey Matyukevich | 3 | -6/+17 | |
| Host wireless stack uses u32 type for RTS/FRAG threshold values. Switch to u32 in driver: pass u32 values to firmware and let firmware properly adapt these values according to its internal representation. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: add support for 4addr mode | Sergey Matyukevich | 5 | -17/+31 | |
| Advertise WIPHY_FLAG_4ADDR_STATION capability to wireless core. Send use4addr interface change flag to firmware in change_virtual_intf cfg80211 callback. In order to enable adding wireless station interface to bridge one should turn on 4addr mode using the following command: $ iw dev wlan0 set 4addr on $ brctl addif br0 wlan0 If this commands succeeds, then interface can be added to bridge. Note that when wireless interface is added to bridge, wpa_supplicant should be started with appropriate -b <brname> parameter, e.g: $ wpa_supplicant -Dnl80211 -iwlan0 -c/path/to/wpa.conf -b br0 Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
| 2019-02-01 | qtnfmac: fix INTx interrupt handling | Sergey Matyukevich | 1 | -3/+3 | |
| In the current implementation INTx interrupt is deasserted after the control path processing. However this may lead to missed interrupts from the wireless card. For instance, this may happen as a result of control path activity, when another interrupt arrives before INTx is deasserted. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||||
 |
index : linux | |
| Linux Kernel (branches are rebased on master from time to time) | Linus Torvalds |
| summaryrefslogtreecommitdiffstats |