summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex/wmm.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo1-1531/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14mwifiex: remove unnecessary NULL checkXinming Hu1-1/+1
ra_list cannot be NULL here, so remove the unnecessary NULL check. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-12Merge tag 'wireless-drivers-next-for-davem-2015-10-09' of ↵David S. Miller1-11/+41
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: iwlwifi * some debugfs improvements * fix signedness in beacon statistics * deinline some functions to reduce size when device tracing is enabled * filter beacons out in AP mode when no stations are associated * deprecate firmwares version -12 * fix a runtime PM vs. legacy suspend race * one-liner fix for a ToF bug * clean-ups in the rx code * small debugging improvement * fix WoWLAN with new firmware versions * more clean-ups towards multiple RX queues; * some rate scaling fixes and improvements; * some time-of-flight fixes; * other generic improvements and clean-ups; brcmfmac * rework code dealing with multiple interfaces * allow logging firmware console using debug level * support for BCM4350, BCM4365, and BCM4366 PCIE devices * fixed for legacy P2P and P2P device handling * correct set and get tx-power ath9k * add support for Outside Context of a BSS (OCB) mode mwifiex * add USB multichannel feature ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05mwifiex: avoid gettimeofday in ba_threshold settingArnd Bergmann1-11/+4
mwifiex_get_random_ba_threshold() uses a complex homegrown implementation to generate a pseudo-random number from the current time as returned from do_gettimeofday(). This currently requires two 32-bit divisions plus a couple of other computations that are eventually discarded as only eight bits of the microsecond portion are used at all. We could replace this with a call to get_random_bytes(), but that might drain the entropy pool too fast if this is called for each packet. Instead, this patch converts it to use ktime_get_ns(), which is a bit faster than do_gettimeofday(), and then uses a similar algorithm as before, but in a way that takes both the nanosecond and second portion into account for slightly-more-but-still-not-very-random pseudorandom number. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29mwifiex: complete usb tx data with multi endpointsZhaoyang Liu1-4/+34
This patch do the work to TX data with specific USB endpoint. At the same time, update data_sent flag according to multi port status. And is_port_ready API is added for BSS interface to check if current used usb data endpoint is available or not. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: move usb specific data_sent update to usb.cZhaoyang Liu1-5/+0
This patch move data_sent flag update to usb.c file. >From now all data_sent update cases only happened in specific file: sdio.c, usb.c, pcie.c. Outside ot these files, it is only allowed to check the value of data_ent. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: fix tx data_sent issue for usb interfaceZhaoyang Liu1-2/+2
This patch fix missing tx data_sent flag update for usb interface. Except USB interface, data_sent flag has been updated in specific file such as sdio.c and pcie.c. So only USB interface type need check when TX data completed. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: correct paused tx data packet counterZhaoyang Liu1-2/+7
This patch fixes observed issues while updating counter for number of paused data packets in wmm queue when trying to delete packet or delete station entry. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: enable traffic only when port is openAvinash Patil1-1/+4
This patch adds support to enable data traffic only when port is open. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: support for bypass tx queueAvinash Patil1-0/+53
This patch adds support for another TX queue in driver- bypass TX queue. This queue is used for sending data/mgmt packets while in disconnected state i.e. when port is yet not unblocked. TDLS setup packets would also be queued in this queue. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: enhance tdls link setup conditionXinming Hu1-2/+5
TDLS link status - channel switching, off channel or base channel itself indicates that TDLS link is setup. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: process tdls channel switch eventXinming Hu1-0/+45
This patch add support for tdls channel switch event process. We block TX queues for particular RA list depending upon channel switch state. If channel switch state is moving to base channel, we unblock RA lists for AP. If channel switch state is moving to off channel, we unblock TDLS peer RA lists. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: do not increase tx_pkts_queued if receive address tx pausedXinming Hu1-1/+4
If tx_pkts_queued is increased for tx paused receive address, tx process will be triggered for this packet. But since RA list was tx paused, there will be an infinite loop in mwifiex_wmm_process_tx waiting for the event(tx pause, tdls cs) to cancel tx pause. This will be an dead loop, since main_process was locked at this time, there will be no opportunity to process event. So do not increase tx_pkts_queued if receive address tx paused, this will be restored RA list is unpaused. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: block data traffic to tx paused receive addressXinming Hu1-1/+2
Data traffic to tx paused receive address should be blocked. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tx data pause supportAvinash Patil1-0/+38
This patch adds support to enable TX data pause feature for mwifiex. Whenever FW TX buffers reach threshold, FW would send TX pause event to driver. Driver in turn would block data traffic to that particular receiver address. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: change dbg print func to mwifiex_dbgZhaoyang Liu1-46/+52
This patch changes all debug print functions from dev_dbg/dev_err/dev_info to mwifiex specific debug functions. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-09revert "mwifiex: enable aggregation for TID 6 and 7 streams"Avinash Patil1-0/+9
This patch reverts 'commit c5534844cdee ("mwifiex: enable aggregation for TID 6 and 7 streams")'. TID6 & TID7 is voice traffic which is quite time sensitive. Do not enable any type of aggregation on these TIDs. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: preprocess packets from TX queueZhaoyang Liu1-4/+17
During profiling, we discovered that driver remains idle for time when pakcet is downloaded to FW but no TX_DONE has been received i.e. while data_sent is true. This patch adds enhancement to TX routine where we preprocess packets from TX queue, make them ready for TX and add them to separate TX queue. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Chin-ran Lo <crlo@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: remove_bss_prio_lockZhaoyang Liu1-9/+2
This patch does away with spinlock in mwifiex_wmm_get_highest_priolist_ptr in order to improve TP. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: get rid of BA setup helper functionsZhaoyang Liu1-7/+9
This patch removes BA setup helper routines mwifiex_is_bastream_setup and mwifiex_is_amsdu_in_ampdu_allowed. Current code will use two functions to check bastream setup and amsdu in ampdu. This patch change these functions to flags, thus avoiding redundant spin_lock check while dequeuing TX packets. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03wireless: Use eth_<foo>_addr instead of memsetJoe Perches1-1/+1
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03mwifiex: fix memory leak in mwifiex_send_processed_packet()Amitkumar Karwar1-0/+3
Memory is leaked after downloading already processed packet. This patch fixes the problem by freeing returned skb. Other transmit paths don't have this problem. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-05mwifiex: guard station nodes access by station list lockAvinash Patil1-3/+3
Station node entries should be guarded for whole of their reference instead of just while getting node entry from station list. It may happen that station node is retrieved may be deleted by deauthentication event while it is still in use. Reported by: Tim Shepard <shep@xplot.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-05mwifiex: delete peer station's RA list upon deauthenticationAvinash Patil1-0/+26
This patch adds support to delete peer station's RA lists upon station deautheticate event on AP interface. Patch also decrements TX pending count upon removing packets from RA list. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-25mwifiex: add Tx status support for EAPOL packetsAmitkumar Karwar1-0/+10
Firmware notifies the driver through event if EAPOL data packet has been acked or not. We will inform this status to userspace listening on a socket. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25wireless: mwifiex: Use the proper interfacesThomas Gleixner1-8/+1
Why is converting time formats so desired if there are proper interfaces for this? Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bing Zhao <bzhao@marvell.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25Revert "mwifiex: Use the proper interfaces"Bing Zhao1-1/+8
This reverts commit a82fc3b4a2bceb7c6587249cb690342eb5065979. Thomas corrected me on that I misunderstood Johannes' comment for net_timedelta() and the ktime_get_real() usage inside __net_timestamp(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: update Copyright to 2014Xinming Hu1-1/+1
This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20mwifiex: Use the proper interfacesThomas Gleixner1-8/+1
Why is converting time formats so desired if there are proper interfaces for this? Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29mwifiex: set TDLS link for newly created RA listAvinash Patil1-0/+1
Current implementation sets tdls_link flag only while restoring packets from TDLS queue. If traffic to peer starts after TDLS is setup, there is no way to set TDLS link flag to true. Do this while creating RA list and we confirm that there exist a TDLS peer for which setup is complete. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: avoid TDLS check for packets destined to APAvinash Patil1-1/+1
In station role if TDLS is supported, we traverse TDLS peer list to see if packet's destination address matches with TDLS peer. Packets destined to AP are not sent over TDLS link and hence avoid this list traversal for such packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville1-5/+5
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg1-5/+5
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mwifiex: enable aggregation for TID 6 and 7 streamsAmitkumar Karwar1-9/+0
Currently AMSDU and AMPDU aggregation is enabled for TID 0 to TID 5 streams. Lets enable it for remaining two streams also. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14mwifiex: add AMSDU inside AMPDU supportAmitkumar Karwar1-11/+26
Currently AMPDU aggregation is preferred over AMSDU. AMSDU aggregation is performed only if AMPDU streams in firmware are full. This patch adds simultaneous AMSDU and AMPDU aggregation support. This mechanism helps to improve throughput. AMSDU is enabled only for 8897 chipsets which supports 4K transmit buffer. User can disable AMSDU using 'disable_tx_amsdu' module parameter. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04Merge branch 'master' of ↵John W. Linville1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
2014-02-20mwifiex: clean pcie ring only when device is presentAvinash Patil1-1/+2
Write io memory to clean PCIe buffer only when PCIe device is present else this results into crash because of invalid memory access. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: AMPDU support for TDLS linkAvinash Patil1-1/+8
This patch adds AMPDU support for TDLS link. We have set 11n capabilities including AMPDU parameters during ENABLE_LINK. We set a variable in RA list to indicate this as TDLS link. This patch uses these capabilities to know if AMPDU is allowed on TDLS link and enables AMPDU aggregation for TX and RX reording support for RA list for this peer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: tdls related handling for data packets addressed to TDLS peerAvinash Patil1-6/+36
1. If data packet is addressed to TDLS peer for which link is established, mark these packets with TDLS flag so that FW can send them on direct link instead of sending via AP. 2. If data packet is addressed to TDLS peer and TDLS setup is underway, move these packets to TDLS queue. 3. If this packet is TDLS setup packet, do not block it. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: provision for holding and restoring packets during TDLS setupAvinash Patil1-0/+4
While TDLS link is being setup, few packets from this station to peer station may be buffered at AP. It may happen that once TDLS link is setup, packets sent from station to peer on direct link get delivered before traffic from AP arrives at peer station. This results into packet reordering issue at peer station. To avoid this, we hold data packets destined to TDLS peer during TDLS setup. These packets are moved to temperory TDLS TX queue. Upon successful TDLS setup, they are moved to RA list created for this peer. Upon failure, packets are moved back to AP's RA list for that particular TID. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: parse TDLS action frames during RXAvinash Patil1-3/+2
This patch adds support for parsing TDLS action frames during station receive handler. Peer station capabilities are stored into station node. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: make tos_to_tid_inv part of mwifiex_private structureAvinash Patil1-23/+11
tos_to_tid_inv values are needed even during TDLS restore operations. Currently tos_to_tid_inv is part of wmm.c and is declared static. Make it part of private structure so that it can be used in other files as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: handle AMPDU supported check for AP interfaceAvinash Patil1-1/+1
This patch fixes a bug where we were checking for AP's AMPDU param setting even when transmitting traffic to associated station. Patch adds provision to pass additional parameter ra_list pointer to function which checks if AMPDU is allowed. If current BSS type is AP, we check station's AMPDU params else we check AP's AMPDU params. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11mwifiex: potential integer underflow in mwifiex_ret_wmm_get_status()Dan Carpenter1-0/+3
Before we loop for next iteration we adjust the buffer pointer and "resp_len": curr += (tlv_len + sizeof(tlv_hdr->header)); resp_len -= (tlv_len + sizeof(tlv_hdr->header)); If "resp_len" gets set to negative then it counts as a high positive value. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-17Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-10-10mwifiex: Change variable type to boolPeter Senna Tschudin1-1/+1
The variables cancel_scan_cmd, enable_data, hs_activate and valid are only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26mwifiex: fix hang issue for USB chipsetsAmitkumar Karwar1-2/+1
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 We have 4 bytes of interface header for packets delivered to SDIO and PCIe, but not for USB interface. In Tx AMSDU case, currently 4 bytes of garbage data is unnecessarily appended for USB packets. This sometimes leads to a firmware hang, because it may not interpret the data packet correctly. Problem is fixed by removing this redundant headroom for USB. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by: Dmitry Khromov <icechrome@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: maintain outstanding packet count for RA list instead of packet sizeAvinash Patil1-4/+4
Maintain total outstanding packet count for RA list instead of total outstanding size as packet count metric seems more reasonable for checking threshold etc. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: rename pkt_count to ba_pkt_count in mwifiex_ra_list_tbl structAvinash Patil1-4/+4
pkt_count is used to determine if BA can be formed on this RA list by comparing it with randomly generated BA threshold. The pkt_count variable name here is ambiguous and does not reflect its usage correctly. Rename it to ba_pkt_count. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12mwifiex: enable/disable tx_amsdu support via module parameterAvinash Patil1-1/+4
This patch disables tx_amsdu support in mwifiex by default. tx_amdsu support can be enabled via module parameter at load time. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-03 12:58:02 +0000