summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-11mt76: mt76x0: disable GTK offloadingDavid Bauer1-0/+4
When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE), only the first one to be created will transmit properly encrypteded frames. All subsequently created VAPs will sent out frames with the payload left unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially disclosing information to a third party. Disable GTK offloading and encrypt these frames in software to circumvent this issue. THis only seems to be necessary on MT7610 chips, as MT7612 is not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-27mt76: move vif_mask back from mt76_phy to mt76_devFelix Fietkau1-4/+4
Since it is global for all drivers, it belongs to the main device Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move chainmask in mt76_phyLorenzo Bianconi1-2/+2
Move chainmask from driver phy to mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move mac_work in mt76_core moduleLorenzo Bianconi1-1/+1
Move mac_work delayed_work and mac_work_count in mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move hw mac_addr in mt76_phyLorenzo Bianconi1-4/+4
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move tx hw data queues in mt76_phyLorenzo Bianconi1-2/+2
Move hw data queues in mt76_phy from mt76_dev since mt7915 supports per phy hw queues in dbdc mode Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: do not set NEEDS_UNIQUE_STA_ADDR for 7615 and 7915Felix Fietkau1-0/+1
The newer chipsets can deal with the same STA on multiple interfaces Preparation for supporting more station interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove retry_q from struct mt76_txq and related codeFelix Fietkau1-3/+0
Since the switch to using AQL by default, mtxq->retry_q is never filled anymore Remove it to get rid of a few more unnecessary cycles in the tx path Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove struct mt76_sw_queueFelix Fietkau1-1/+1
All members except for the struct mt76_queue pointer have been removed Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: vif_mask to struct mt76_phyFelix Fietkau1-4/+4
All drivers use this in pretty much the same way. Moving it to core helps with some checks for the upcoming testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix per-driver wcid range checks after wcid array size bumpFelix Fietkau1-1/+1
All drivers before MT7915 have a limit of 128 WCID entries. Stop relying on ARRAY_SIZE(dev->mt76.wcid), since it no longer reflects that limit. Fixes: 49e649c3e0a6 ("mt76: adjust wcid size to support new 802.11ax generation") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-13mt76: enable p2p supportLorenzo Bianconi1-0/+4
Introduce p2p-go/p2p-client suppor to mt76 driver Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: do not set HOST_BROADCAST_PS_BUFFERING for mt7615Felix Fietkau1-0/+1
mt7615 handles powersave buffering in firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move WIPHY_FLAG_HAS_CHANNEL_SWITCH in mt76_phy_initLorenzo Bianconi1-1/+0
Move WIPHY_FLAG_HAS_CHANNEL_SWITCH in mt76-core module since now all drivers support Channel Switch Announcement Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02: simplify led reg definitionsLorenzo Bianconi1-3/+3
Rely on FIELD_PREP macro for led register definitions and remove open coding Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02: add channel switch support for usb interfacesMarkus Theil1-1/+1
This patch enables channel switch support on mt76 usb interfaces. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02: add check for invalid vif idxMarkus Theil1-1/+3
On adding vifs the idx can become 1 + (7 & 7) = 8 for APs. Check against that, as only AP vif idx 0-7 is possible. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02: fix coverage_class typeLorenzo Bianconi1-1/+1
Fix coverage_class type in mt76x02_dev data structure since coverage_class can be negative to enable dynack (just supported by ath9k). Set 0 as minimum value for coverage_class Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower and antenna mask to struct mt76_phyFelix Fietkau1-2/+2
Adds multiple wiphy support to mt76_get_txpower Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move chainmask back to driver specific structsFelix Fietkau1-2/+2
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau1-1/+1
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move channel state to struct mt76_phyFelix Fietkau1-2/+2
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-21mt76: fix fix ampdu lockingMarkus Theil1-2/+4
The current ampdu locking code does not unlock its mutex in the early return case. This patch fixes it. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20mt76: move interface_modes definition in mt76_core moduleLorenzo Bianconi1-8/+0
Move interface modes declaration in common code since now mt76 chipsets support all modes (NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP, NL80211_IFTYPE_MESH_POINT and NL80211_IFTYPE_ADHOC) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_deviceLorenzo Bianconi1-1/+0
Move SUPPORTS_REORDERING_BUFFER hw property configuration from chip specific code to mt76_register_device since it is supported by all mt76 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: use mt76_dev in mt76_is_{mmio,usb}Lorenzo Bianconi1-3/+3
Convert mt76_is_mmio and mt76_is_usb to rely on mt76_dev instead of mt76x02_dev since this is a property not strictly related to hw chipset and it will be more reusable Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: add missing locking around ampdu actionFelix Fietkau1-0/+2
This is needed primarily to avoid races in dealing with rx aggregation related data structures Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: track approximate tx airtime for airtime fairness and surveyFelix Fietkau1-0/+1
Estimate by calculating duration for EWMA packet size + estimated A-MPDU length on tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-10-04mac80211: simplify TX aggregation startJohannes Berg1-2/+1
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-05mt76: do not send BAR frame on tx aggregation flush stopFelix Fietkau1-1/+0
There is no need to send a BAR frame after stopping aggregation, and doing so could lead to sending class 3 frames after deauthentication from an AP Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_completeLorenzo Bianconi1-9/+0
Introduce a default implementation for mt76_sw_scan and mt76_sw_scan_complete in mt76 module and remove duplicated code since most of the drivers share the same implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02u: enable multi-vif supportLorenzo Bianconi1-0/+26
Enable multi-interface support for mt76x02u driver. For the moment allow max two concurrent interfaces in order to preserve enough room for ps traffic since we are using beacon slots for it. I have successfully tested the following configuration: - AP + STA - AP0 + AP1 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee1-12/+1
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: fix some checkpatch warningsRyder Lee1-10/+10
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: use params->ssn value directlyStanislaw Gruszka1-3/+3
There is no point to use pointer to params->ssn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_completeLorenzo Bianconi1-5/+0
Do not enable/disable pre_tbtt_tasklet tasklet in mt76x02_sw_scan/mt76x02_sw_scan_complete since it is already done setting the operating channel. Do run tbtt_tasklet while the device is offchannel Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move pre_tbtt_tasklet in mt76_devLorenzo Bianconi1-2/+2
Move pre_tbtt_tasklet tasklet in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move beacon_int in mt76_devLorenzo Bianconi1-1/+1
Move beacon_int in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: use macro for sn and seq_ctrl conversionRyder Lee1-1/+1
Use macro to convert sn and seq_ctrl for better readability. Signed-off-by: Roy Luo <royluo@google.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move mac_work in mt76_devLorenzo Bianconi1-1/+1
Move mac_work delayed work in mt76_dev data structure since it is used by all drivers and it will be reused adding mac work to mt7615 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: store wcid tx rate info in one u32 reduce lockingFelix Fietkau1-1/+0
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: enable AP mode for USBStanislaw Gruszka1-1/+1
Enable AP mode. For now without multi-vif support, this will require more testing and investigation. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: disable HW encryption for group framesStanislaw Gruszka1-0/+10
This is required to sent multicast/broadcast frames in USB AP mode just after beacon. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02u: add sta_psStanislaw Gruszka1-1/+2
Add sta_ps callback but dont set WCID drop sicne registers for USB can not be accessed from tasklet context. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka1-62/+0
Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move mt76x02_insert_hdr_pad in mt76-core moduleLorenzo Bianconi1-16/+0
Move mt76x02_insert_hdr_pad in m76-core and rename it in mt76_insert_hdr_pad in order to be used in mt76_dma_tx_queue_skb. This is a preliminary patch in order to properly support tx dma mapping for new chipsets (e.g. mt7615) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_sw_queue data structureLorenzo Bianconi1-1/+1
Introduce mt76_sw_queue data structure in order to support new chipsets (e.g. mt7615) that have a shared hardware queue for all traffic identifiers. mt76_sw_queue will be used to track outstanding packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07mt76: mt76x02: only update the base mac address if necessaryFelix Fietkau1-4/+6
Also update the mask first before calculating the vif index. Fixes an issue where adding back the same interfaces in a different order fails because of duplicate vif index use Fixes: 06662264ce2ad ("mt76x02: use mask for vifs") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07mt76: mt76x2: implement full device restart on watchdog resetFelix Fietkau1-0/+4
Restart the firmware and re-initialize the MAC to be able to recover from more kinds of hang states Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: mt76x02: only reset beacon drift counter when enabling beaconsFelix Fietkau1-1/+0
When the timer is already running, there is no need to reset the counter, because the drift will remain the same. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-25 10:12:28 +0000