summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/libertas/cfg.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18libertas: move under marvell vendor directoryKalle Valo1-2215/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26cfg80211: properly send NL80211_ATTR_DISCONNECTED_BY_AP in disconnectJohannes Berg1-7/+6
When we disconnect from the AP, drivers call cfg80211_disconnect(). This doesn't know whether the disconnection was initiated locally or by the AP though, which can cause problems with the supplicant, for example with WPS. This issue obviously doesn't show up with any mac80211 based driver since mac80211 doesn't call this function. Fix this by requiring drivers to indicate whether the disconnect is locally generated or not. I've tried to update the drivers, but may not have gotten the values correct, and some drivers may currently not be able to report correct values. In case of doubt I left it at false, which is the current behaviour. For libertas, make adjustments as indicated by Dan Williams. Reported-by: Matthieu Mauger <matthieux.mauger@intel.com> Tested-by: Matthieu Mauger <matthieux.mauger@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03cfg80211: add bss_type and privacy arguments in cfg80211_get_bss()Dedy Lansky1-3/+3
802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg1-6/+6
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-14wireless: libertas: print esaped string via %*pEAndy Shevchenko1-6/+2
Instead of custom approach this allows to print escaped strings via recently added kernel extension: %*pE. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W . Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+2
Pull networking updates from David Miller: "Most notable changes in here: 1) By far the biggest accomplishment, thanks to a large range of contributors, is the addition of multi-send for transmit. This is the result of discussions back in Chicago, and the hard work of several individuals. Now, when the ->ndo_start_xmit() method of a driver sees skb->xmit_more as true, it can choose to defer the doorbell telling the driver to start processing the new TX queue entires. skb->xmit_more means that the generic networking is guaranteed to call the driver immediately with another SKB to send. There is logic added to the qdisc layer to dequeue multiple packets at a time, and the handling mis-predicted offloads in software is now done with no locks held. Finally, pktgen is extended to have a "burst" parameter that can be used to test a multi-send implementation. Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4, virtio_net Adding support is almost trivial, so export more drivers to support this optimization soon. I want to thank, in no particular or implied order, Jesper Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann, David Tat, Hannes Frederic Sowa, and Rusty Russell. 2) PTP and timestamping support in bnx2x, from Michal Kalderon. 3) Allow adjusting the rx_copybreak threshold for a driver via ethtool, and add rx_copybreak support to enic driver. From Govindarajulu Varadarajan. 4) Significant enhancements to the generic PHY layer and the bcm7xxx driver in particular (EEE support, auto power down, etc.) from Florian Fainelli. 5) Allow raw buffers to be used for flow dissection, allowing drivers to determine the optimal "linear pull" size for devices that DMA into pools of pages. The objective is to get exactly the necessary amount of headers into the linear SKB area pre-pulled, but no more. The new interface drivers use is eth_get_headlen(). From WANG Cong, with driver conversions (several had their own by-hand duplicated implementations) by Alexander Duyck and Eric Dumazet. 6) Support checksumming more smoothly and efficiently for encapsulations, and add "foo over UDP" facility. From Tom Herbert. 7) Add Broadcom SF2 switch driver to DSA layer, from Florian Fainelli. 8) eBPF now can load programs via a system call and has an extensive testsuite. Alexei Starovoitov and Daniel Borkmann. 9) Major overhaul of the packet scheduler to use RCU in several major areas such as the classifiers and rate estimators. From John Fastabend. 10) Add driver for Intel FM10000 Ethernet Switch, from Alexander Duyck. 11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric Dumazet. 12) Add Datacenter TCP congestion control algorithm support, From Florian Westphal. 13) Reorganize sk_buff so that __copy_skb_header() is significantly faster. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits) netlabel: directly return netlbl_unlabel_genl_init() net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers net: description of dma_cookie cause make xmldocs warning cxgb4: clean up a type issue cxgb4: potential shift wrapping bug i40e: skb->xmit_more support net: fs_enet: Add NAPI TX net: fs_enet: Remove non NAPI RX r8169:add support for RTL8168EP net_sched: copy exts->type in tcf_exts_change() wimax: convert printk to pr_foo() af_unix: remove 0 assignment on static ipv6: Do not warn for informational ICMP messages, regardless of type. Update Intel Ethernet Driver maintainers list bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING tipc: fix bug in multicast congestion handling net: better IFF_XMIT_DST_RELEASE support net/mlx4_en: remove NETDEV_TX_BUSY 3c59x: fix bad split of cpu_to_le32(pci_map_single()) net: bcmgenet: fix Tx ring priority programming ...
2014-09-01treewide: fix errors in printkMasanari Iida1-1/+1
This patch fix spelling typo in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26cfg80211: allow passing frame type to cfg80211_inform_bss()Johannes Berg1-0/+2
When using the cfg80211_inform_bss[_width]() functions drivers cannot currently indicate whether the data was received in a beacon or probe response. Fix that by passing a new enum that indicates such (or unknown). For good measure, use it in ath6kl. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl] Acked-by: Arend van Spriel <arend@broadcom.com> [brcmfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify more pointers in the cfg80211 APIJohannes Berg1-3/+2
This also propagates through the drivers. The orinoco driver uses the cfg80211 API structs for internal bookkeeping, and so needs a (void *) cast that removes the const - but that's OK because it allocates those pointers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg1-1/+1
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-20libertas: fix scan result loss if SSID IE len 0James Cameron1-1/+1
Scan results from Marvell 8388 and 8686 have probe responses from hidden APs and OLPC XO-1 mesh with a zero length SSID IE. Bug in lbs_ret_scan discarded any remaining BSS in scan response, leading to user not seeing APs in dense environments. With LBS_DEB_SCAN, dmesg shows libertas scan: scan response: 5 BSSs (419 bytes); resp size 474 bytes libertas scan: scan: 00:1a:2b:84:de:e8, capa 0401, chan 1, qz, -51 dBm libertas scan: scan: 5c:63:bf:d8:eb:0c, capa 0411, chan 1, qw129, -23 dBm libertas scan: scan response: invalid IE fmt With LBS_DEB_HEX, dmesg shows valid BSS in scan response were not processed. Change is to ignore zero length IE and continue processing. Fixes OLPC 12757, http://dev.laptop.org/ticket/12757 Signed-off-by: James Cameron <quozl@laptop.org> Reported-by: T Gillett <tgillett@gmail.com> Tested-by: T Gillett <tgillett@gmail.com> CC: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04cfg80211: fix channel configuration in IBSS joinAntonio Quartulli1-1/+2
When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-09cfg80211: Add a function to get the number of supported channelsIlan Peer1-6/+1
Add a utility function to get the number of channels supported by the device, and update the places in the code that need this data. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [replace another occurrence in libertas, fix kernel-doc, fix bugs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18Merge branch 'master' of ↵John W. Linville1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg1-4/+4
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04wireless: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches1-3/+1
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Remove now unused variables. Remove unnecessary memset after kzalloc->kcalloc. Whitespace cleanups for these changes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14wireless: make the reg_notifier() voidLuis R. Rodriguez1-18/+15
The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix BSS struct IE access racesJohannes Berg1-1/+8
When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: pass a channel definition structJohannes Berg1-12/+12
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-02libertas: fix two memory leaksDaniel Drake1-0/+1
The if_sdio_card structure was never being freed, and neither was the command structure used for association. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17libertas: Update 11d info only when interface is activeDaniel Drake1-2/+4
reg_notifier can be called before the interface is up. Handle this correctly by storing the requested country code, then apply the relevant configuration when the interface is brought up. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-12nl80211: move scan API to wdevJohannes Berg1-1/+0
The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg1-11/+28
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13libertas: fix signedness bug in lbs_auth_to_authtype()Amitkumar Karwar1-2/+7
Return type for lbs_auth_to_authtype() is changed from "u8" to "int" to return negative error code correctly. Also an error check is added in connect handler for invalid auth type. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15libertas: remove dump_survey implementationDaniel Drake1-37/+0
libertas provides a dump_survey implementation based on reading of a RSSI value. However, this RSSI value is calculated based on the last received beacon from the associated AP - it is not a good way of surveying a channel in general, and even causes an error if the card is not associated to a network. As this is not appropriate as a survey, remove it. This fixes an issue where something in userspace is repeatedly calling site-survey during boot, resulting in many repeated errors as the RSSI value cannot be read before associating. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-21libertas: clean up scan thread handlingAndres Salomon1-4/+6
The libertas scan thread expects priv->scan_req to be non-NULL. In theory, it should always be set. In practice, we've seen the following oops: [ 8363.067444] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 8363.067490] pgd = c0004000 [ 8363.078393] [00000004] *pgd=00000000 [ 8363.086711] Internal error: Oops: 17 [#1] PREEMPT [ 8363.091375] Modules linked in: fuse libertas_sdio libertas psmouse mousedev ov7670 mmp_camera joydev videobuf2_core videobuf2_dma_sg videobuf2_memops [last unloaded: scsi_wait_scan] [ 8363.107490] CPU: 0 Not tainted (3.0.0-gf7ccc69 #671) [ 8363.112799] PC is at lbs_scan_worker+0x108/0x5a4 [libertas] [ 8363.118326] LR is at 0x0 [ 8363.120836] pc : [<bf03a854>] lr : [<00000000>] psr: 60000113 [ 8363.120845] sp : ee66bf48 ip : 00000000 fp : 00000000 [ 8363.120845] r10: ee2c2088 r9 : c04e2efc r8 : eef97005 [ 8363.132231] r7 : eee0716f r6 : ee2c02c0 r5 : ee2c2088 r4 : eee07160 [ 8363.137419] r3 : 00000000 r2 : a0000113 r1 : 00000001 r0 : eee07160 [ 8363.143896] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8363.157630] Control: 10c5387d Table: 2e754019 DAC: 00000015 [ 8363.163334] Process kworker/u:1 (pid: 25, stack limit = 0xee66a2f8) While I've not found a smoking gun, there are two places that raised red flags for me. The first is in _internal_start_scan, when we queue up a scan; we first queue the worker, and then set priv->scan_req. There's theoretically a 50mS delay which should be plenty, but doing things that way just seems racy (and not in the good way). The second is in the scan worker thread itself. Depending on the state of priv->scan_channel, we cancel pending scan runs and then requeue a run in 300mS. We then send the scan command down to the hardware, sleep, and if we get scan results for all the desired channels, we set priv->scan_req to NULL. However, it that's happened in less than 300mS, what happens with the pending scan run? This patch addresses both of those concerns. With the patch applied, we have not seen the oops in the past two weeks. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-02Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/libertas/cfg.c
2011-11-11libertas: release bss references and avoid warning from cfg80211_inform_bssJohn W. Linville1-10/+15
CC [M] drivers/net/wireless/libertas/cfg.o drivers/net/wireless/libertas/cfg.c: In function ‘lbs_ret_scan’: drivers/net/wireless/libertas/cfg.c:636:24: warning: ignoring return value of ‘cfg80211_inform_bss’, declared with attribute warn_unused_result drivers/net/wireless/libertas/cfg.c: In function ‘lbs_join_post’: drivers/net/wireless/libertas/cfg.c:1766:21: warning: ignoring return value of ‘cfg80211_inform_bss’, declared with attribute warn_unused_result Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09wireless: libertas: fix unaligned le64 accessesSteven Miao1-1/+1
use get_unaligned_le64() to get timestamp Signed-off-by: Steven Miao <realmz6@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02libertas: ensure we clean up a scan request properlyAndres Salomon1-8/+17
Commit 2e30168b ("libertas: terminate scan when stopping interface") adds cleanup code to lbs_eth_stop to call cfg80211_scan_done if there's an outstanding cfg80211_scan_request. However, it assumes that the scan request was allocated via the cfg80211 stack. Libertas has its own internal allocation method, kept track of with priv->internal_scan. This doesn't set scan_req->wiphy, amongst other things, which results in hitting a BUG() when we call cfg80211_scan_done on the request. This provides a function to take care of the low-level scan_req cleanup details. We simply call that to deal with finishing up scan requests. The bug we were hitting was: [ 964.321495] kernel BUG at net/wireless/core.h:87! [ 964.329970] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 964.341963] pgd = dcf80000 ... [ 964.849998] 9fe0: 00000000 beb417b8 4018e280 401e822c 60000010 00000004 00000000 00000000 [ 964.865007] [<c003104c>] (__bug+0x1c/0x28) from [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) [ 964.895324] [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) from [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) [ 964.895324] [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) from [<c03002a0>] (__dev_close_many+0x94/0xc4) [ 964.918995] [<c03002a0>] (__dev_close_many+0x94/0xc4) from [<c030037c>] (dev_close_many+0x78/0xe0) Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14libertas: fix changing interface type when interface is downDaniel Drake1-14/+6
The recent changes to only power the device when the interface up introduced a bug: changing interface type, legal when the interface is down, performs device I/O. Fix this functionality by validating and recording the interface type when the change is requested, but only applying the change if/when the interface is brought up. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27libertas: scan behaviour consistency improvementsDaniel Drake1-16/+17
When scanning for the broadcast SSID, there is no need to add the SSID TLV (restoring the behaviour of the driver behaviour in the wext days, confirmed in Marvell specifications). If bssid is unspecified, the current scan code will usually fire off an active scan probing for the specific requested SSID. However, if a scan is ongoing (or has just finished), those scan results will be used instead (even if that scan is totally different, e.g. a passive scan on channel 4 for a different SSID). Fix this inconsistency by always firing off a scan when associating without a bssid. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09libertas: disable functionality when interface is downDaniel Drake1-16/+23
Modify the driver so that it does not function when the interface is down, in preparation for runtime power management. No commands can be run while the interface is down, so the ndo_dev_stop routine now directly does all necessary work (including asking the device to disconnect from the network and disabling multicast functionality) directly. power_save and power_restore hooks are added meaning that card drivers can take steps to turn the device off when the interface is down. The MAC address can now only be changed when all interfaces are down; the new address will be programmed when an interface gets brought up. This matches mac80211 behaviour. Also, some small cleanups/simplifications were made in the surrounding device handling logic. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08libertas: link mesh device to wiphyDaniel Drake1-3/+33
The mesh device is now exposed as an interface of the wiphy. This exposes the mesh device to the cfg80211 interface, allowing mesh channel selection to be reimplemented, and available to NetworkManager as it was before. Some header tweaking was needed in order to implement lbs_mesh_activated(). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan1-0/+1
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16Merge branch 'master' of ↵John W. Linville1-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-11libertas: Use netdev_<level> or dev_<level> where possibleJoe Perches1-4/+5
Using the more descriptive logging styles gives a bit more information about the device being operated on. Makes the object trivially smaller too. $ size drivers/net/wireless/libertas/built-in.o.* 187730 2973 38488 229191 37f47 drivers/net/wireless/libertas/built-in.o.new 188195 2973 38488 229656 38118 drivers/net/wireless/libertas/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11libertas: Convert lbs_pr_<level> to pr_<level>Joe Perches1-7/+8
Use the standard pr_<level> functions eases grep a bit. Added a few missing terminating newlines to messages. Coalesced long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05Merge branch 'master' of ↵John W. Linville1-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-04-28libertas: use kernel-doc notation, fix comment styleRandy Dunlap1-18/+27
Convert all libertas/ files to use kernel-doc notation instead of whatever it was (doxygen?). Add or fix function parameters in several places. Use expected style for multi-line comments in lots of places. Remove erroneous /** in multiple places. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-21cfg80211: Extend channel to frequency mapping for 802.11jBruno Randolf1-2/+4
Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-12-13cfg80211/nl80211: separate unicast/multicast default TX keysJohannes Berg1-1/+2
Allow userspace to specify that a given key is default only for unicast and/or multicast transmissions. Only WEP keys are for both, WPA/RSN keys set here are GTKs for multicast only. For more future flexibility, allow to specify all combiations. Wireless extensions can only set both so use nl80211; WEP keys (connect keys) must be set as default for both (but 802.1X WEP is still possible). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13libertas: fix potential NULL-pointer dereferenceSven Neumann1-1/+1
The code wants to check if there's a channel and it is not disabled, but it used to check if channel is not NULL and accessed the channel struct if this check failed. Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-24Merge branch 'master' of ↵John W. Linville1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-22libertas: Use static constJoe Perches1-1/+1
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 3650 56 704 4410 113a drivers/net/wireless/libertas/rx.o.new 3695 56 704 4455 1167 drivers/net/wireless/libertas/rx.o.old 27328 964 5240 33532 82fc drivers/net/wireless/libertas/cfg.o.new 27328 964 5240 33532 82fc drivers/net/wireless/libertas/cfg.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-22libertas: remove duplicated #includeHuang Weiyi1-2/+0
Remove duplicated #include('s) in drivers/net/wireless/libertas/cfg.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-08libertas: terminate scan when stopping interfaceDaniel Drake1-2/+3
There are currently no provisions in place to ensure that the scanning task has been stopped when the interface is stopped or removed. This can result in a WARNING at net/wireless/core.c:643 and other badness when you remove the module while a scan is happening. Terminate the scanning task during interface stop. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 18:24:01 +0000