summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2013-03-25Merge branch 'for-john' of ↵John W. Linville21-253/+195
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-03-25Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-03-20iwlwifi: mvm: Add support for different ROC typesIlan Peer3-17/+24
Schedule different time event based on the ROC type Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg7-16/+16
2013-03-20iwlwifi: mvm: Increase the max remain on channel timeIlan Peer1-1/+1
Increase the maximal remain on channel time as longer remain on channel requests are handled by the FW using fragmented time events. This reduces the number of user/kernel space iterations during flows such as p2p_listen. In addition it is currently required for flows which require longer duration such as p2p_sd. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: fix WoWLAN RF-kill bugJohannes Berg1-7/+3
The RF-kill wakeup trigger flag is set in the wrong command, which means it won't work. Also fix the comment in the TCP wakeup trigger code -- the firmware was changed to look at all the different trigger flags. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: tune the move to static SMPS due to BT loadEmmanuel Grumbach1-1/+3
We should disable MIMO only if bt_traffic_load goes up to 3. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: take the valid_{rx,tx}_ant from the TLVEmmanuel Grumbach5-11/+22
This is the right source of information for the valid Tx antennas, not the NVM. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: take the radio type / step / dash from TLVsEmmanuel Grumbach2-16/+19
This data should taken from TLVs and not from the NVM. This is true for the value written in CSR_HW_IF_CONFIG_REG too. Also, no need to set the CSR_HW_IF_CONFIG_REG_BIT_MAC_SI bit for 7000 devices which are the only devices currently supported. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: specify filter flags in monitor modeJohannes Berg1-1/+6
In firmware "listener" (monitor) mode, we still need to open up the filters with the filter flags to receive all frames. Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: add debug message when a CMD is dropped in RFKILLEmmanuel Grumbach1-1/+4
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: print the flags in ALIVE notificationEmmanuel Grumbach1-2/+3
This has valuable data about RFkill state seen from the fw side. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: remove 5ghz_disable optionStanislaw Gruszka2-6/+0
5ghz_disable has no effect any longer, that was changed during refactoring of EEPROM reading/parsing. Remove it, wpa_supplicant allow now to specify frequencies, on which device will operate. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: Fix quota handling for monitor interfaceIlan Peer3-3/+9
1. Quota for the monitor interface should be added only if there is a channel context assigned to the interface. 2. In the unassign channel context flow, need to remove the quota for the monitor interface binding, before unbinding. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: use kmemdup instead of kmalloc+memcpyAndrei Epure1-2/+1
Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: Remove obsolete queue definitionsIlan Peer5-14/+10
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: don't support multi-channel inhibitionEmmanuel Grumbach1-2/+1
This feature is not implemented yet in firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: fix the {ack,cts}_kill_mskEmmanuel Grumbach1-7/+7
The masks were wrong. They should be 0xffffffff when SCO, HID or SNIFF profiles are used. They should be 0xffff0000 in any other case (default) to get a bit more throughput when the BT profile allows for it. Fix a debug print on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: Add beacon notification handlerIlan Peer5-0/+31
Mostly for debugging purposes Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: suppress key error messages in AP modeJohannes Berg1-0/+13
In AP mode, don't attempt to program GTKs into the device, they're used for TX only so not needed and programming them causes error messages. Also, in this case and if key programming fails, avoid trying to remove the key that isn't present later. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: MVM op_mode is supported on 7000 onlyEmmanuel Grumbach5-162/+38
The code removed in this patch was used for bring up on older NICs. No MVM capable fw will ever be released for older NICs, so remove that code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18mac80211: pass queue bitmap to flush operationJohannes Berg1-1/+1
There are a number of situations in which mac80211 only really needs to flush queues for one virtual interface, and in fact during this frames might be transmitted on other virtual interfaces. Calculate and pass a queue bitmap to the driver so it knows which queues to flush. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-08Merge branch 'for-john' of ↵John W. Linville85-696/+2000
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-03-06iwlwifi: mvm: the SCD byte count is a TLV flagEmmanuel Grumbach2-2/+3
The SCD byte count layout is decided by the configuration done in fw, it is then logical to export it as a TLV flag and not per HW SKU. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: fix indirect write bugAmnon Paz1-2/+3
Fix a bug in writing to indirect (periphery) registers; although writes seem successful the data is not written to the desired address). Also fix address mask for HBUS_TARG_PRPH_RADDR and HBUS_TARG_PRPH_WADDR registers. Signed-off-by: Amnon Paz <amnonX.paz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: move firmware restart debugfs hook to op_modeEmmanuel Grumbach5-22/+52
This allows to test fw restart flow. The hook in transport layer doesn't really make the fw assert. Moving this hook to the op_mode allows to use the fw API to actually send a host command that will make the fw assert. Change the restart_fw module parameter to be a boolean on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: update firmware API - MAC ID in RXEmmanuel Grumbach1-1/+2
The firmware tells the driver to what MACs the received frame belongs (based on the time slot in which it was received). Note that there can be several MACs if they share the same binding. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: export last bt_notif through debugfsEmmanuel Grumbach3-0/+104
This will allow to track how BT core updates the driver. This is required to debug the BT Coexistence mechanism. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: update SMPS when BT gets activeEmmanuel Grumbach1-0/+52
When BT traffic load gets higher, we want to avoid using the shared antenna. In order to do so, we need to tell the AP that we don't support MIMO any more, or at least not all the time: in short, use the SMPS to achieve this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: handle BT-coex notificationEmmanuel Grumbach3-0/+58
The BT-Coex notification is sent by the fw when there are updates wrt. BT activity. Driver action might be taken based on the info in this notification. For now, update the Ack/Cts_kill_msk if HID / SCO / A2DP profiles are active. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: begin basic BT-Coex implementationEmmanuel Grumbach4-1/+259
Send the PRIO table before the calibrations. This table tells the fw what priority to give to what (WiFi / BT) according to events. Send a hardcoded BT_COEX command to the fw to enable basic BT coexistence. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: add BT Coex FW APIEmmanuel Grumbach3-0/+330
This is the API to tell the fw to handle the BT Coexistence. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: add CARD_STATE_NOTIFICATION to the cmd stringsEmmanuel Grumbach1-0/+1
Then the transport can print it nicely in its debug prints. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: export symbols only conditionallyJohannes Berg11-35/+64
If all the pieces of iwlwifi are built into the kernel then there's no need for it to export its symbols to other modules, so prevent that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: allow selecting only MVM driverJohannes Berg1-1/+4
Now that we have two drivers (DVM and MVM) stop selecting the DVM one (but make it default) and allow enabling only the MVM driver if so desired. Add a warning for the case of having neither DVM nor MVM enabled -- that's useless. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: Change NVM default section read sizeDor Shaish1-3/+6
Signed-off-by: Dor Shaish <dor.shaish@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: don't read system time when modifying AP/GO MACJohannes Berg2-7/+20
When modifying a MAC, we update its beacon system time which is taken as a base to calculate TBTT. The firmware doesn't use the new timestamp because the time is never used after the MAC and broadcast station were added, but it is safer to not rely on this and avoids the overhead of reading the register every time the MAC is updated. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: make device configuration bus agnosticEmmanuel Grumbach9-124/+48
Newer devices can work on different buses. This means that their configuration can be shared between different buses. Hence the configuration structures should exported to all the buses and not only to PCIE. Change this. Note that this requires all the fields to be the same amongst the buses. If differences will appear, we can always define a part that is bus dependent. Today, this is not needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: dvm: pad iwl_compressed_ba_respEmmanuel Grumbach1-0/+1
All the data coming from the fw must have a length that is multiple of 4. This doesn't change anything to the way we handle the notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: advertise VHT capabilitiesEytan Lifshitz1-0/+46
Update the NVM parsing functions to add VHT capabilities; they are only added for 5 GHz, of course. This assumes that all devices with NVM reading (rather than EEPROM) that support 5 GHz have VHT, which is true right now. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: set up initial SMPS/NSS station infoJohannes Berg1-2/+49
When a station is added, we need to tell the firmware what the SMPS settings and number of streams are. After having the initial data, the firmware will track future changes by itself. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: implement remote wakeJohannes Berg3-1/+334
With remote wake, the firmware creates a TCP connection and sends some configurable data on it, until a special TCP data packet from the server is received that triggers a wakeup. The configuration is a bit tricky because it is based on packet pattern matching but this is hidden in the driver and the exposed API in cfg80211 is just based on the required TCP connection parameters. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: convert to use simple_open()Wei Yongjun1-9/+3
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: use __get_str in tracingJohannes Berg1-1/+1
Instead of using (char *)__get_dynamic_array use __get_str. The latter is actually a macro that expands to the former in the code, but trace-cmd in userspace can parse __get_str only. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: support DSSS/CCK mode in 40 MHzJohannes Berg1-1/+1
All hardware after 4965 supports this. It's likely that it wasn't set because for 4965 it was irrelevant (HT is only supported on 5 GHz there) and then never updated. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: support IEEE80211_AMPDU_TX_STOP_FLUSHEmmanuel Grumbach3-1/+33
mac80211 tells us when we need to dump the frames from the AGG queue instead of releasing them as single MPDUs. Being able to differentiate between the different cases (IEEE80211_AMPDU_TX_STOP_*) allows us to handle races better. When the station is removed, mac80211 asks to flush and removes the station right away. This allows to avoid a case where we still have frames in AGG queues, but the station has been remove already. Note that we can have frames on the shared queues, but this is not a problem: the station in the fw will be kept until all the frames on the shared queues have been drained. AGG queues are a special case since they are dynamically allocated. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: Add support for additional addressesIlan Peer2-6/+10
Use the number of addresses (max 5) from the NVM instead of limiting to 2 artificially. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: disable greenfield transmissions as a workaroundBeni Lev1-6/+8
There's a bug that causes the rate scaling to get stuck when it has to use single-stream rates with a peer that can do GF and SGI; the two are incompatible so we can't use them together, but that causes the algorithm to not work at all, it always rejects updates. Disable greenfield for now to prevent that problem. The MVM driver currently only works on devices that don't support greenfield anyway, but better be safe and not allow us to forget about this. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: 7000: disable HT greenfield supportBeni Lev1-1/+0
The 7000 series devices don't support HT greenfield mode so don't advertise or use it. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: mvm: Update MAC context filter flagsIlan Peer1-1/+13
1. For P2P Device filter in only probe requests. 2. For station mode filter in all group cast frames, and in addition beacons as long as we are not associated. 3. For AP/GO filter in all group cast and in addition probe requests. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-26 21:46:23 +0000