summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-05iwlwifi: mvm: check more notification sizesJohannes Berg1-0/+4
Some notifications aren't handled by the general RX handler code, due to multi-queue. Add size checks for them explicitly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.1370c776cb31.Ic536bd1aee5368969fbf65db85b9b9b5dc9c6034@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: add notification size checksJohannes Berg1-5/+4
We shouldn't trust the firmware with the sizes (or contents) of notifications, accessing too much data could cause page faults if the data doesn't fit into the allocated space. This applies more on older NICs where multiple notifications can be in a single RX buffer. Add a general framework for checking a minimum size of any notification in the RX handlers and use it for most. Some RX handlers were already checking and I've moved the checks, some more complex checks I left and made them _NO_SIZE for the RX handlers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.3e155d5e5f90.I2121fa4ac7cd7eb98970d84b793796646afa3eed@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-11iwlwifi: mvm: Fix fall-through warnings for ClangGustavo A. R. Silva1-1/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly using the fallthrough pseudo-keyword as a replacement for a number of "fall through" markings. Notice that Clang doesn't recognize "fall through" comments as implicit fall-through. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201117135053.GA13248@embeddedor
2020-12-10iwlwifi: mvm: check that statistics TLV version match struct versionMordechay Goodstein1-1/+2
FW now puts in the struct version, the TLV version so we also check it to make sure it matches. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.bc1dfb56ffbd.I99d8085cccc8687805781ccc43e189dbcef0e63b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: tighten RX MPDU bounds checksJohannes Berg1-0/+5
Previously, we added checks that the contained MPDU size is long enough, but really we should also check that the notification itself fits into the data. Add some checks for that. Also add unlikely() annotations on the previously added checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.51cc04cf1e3e.I7bfd6809f8f5feb75f79397646e6656e95688a0e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-62/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: validate MPDU length against notification lengthJohannes Berg1-1/+7
The MPDU contained in a notification shouldn't be larger than the notification size itself is, validate this. Reported-by: Haggai Abramovsky <haggai.abramovsky@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7c721ad37014.Id5746874ecfa208b60baa62691b2d9dc5dd4d89c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: iterate active stations when updating statisticsMordechay Goodstein1-23/+13
Instead of enumerating all possible stations iterate only active ones. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c049de5611b4.Ic35b8d1a328903195ec7cb887a9cb198b7d8f856@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: stats: add new api fields for statistics cmd/ntfyMordechay Goodstein1-58/+137
The new API uses TLV format for statistics to enable fast changes and debug on the fly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.a45fd1a34a39.I7709305a6dc7b88d0c5119b12c9251fa6c740262@changeid
2020-10-08iwlwifi: mvm: get number of stations from TLVNathan Errera1-2/+2
FW is changing the max number of supported stations. To adapt to the change we get the max number from the TLV and act according to the new number. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
2020-04-21iwlwifi: mvm: beacon statistics shouldn't go backwardsMordechay Goodstein1-2/+11
We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid
2019-11-15iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui1-1/+2
This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach1-15/+3
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld1-1/+1
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-02-04iwlwifi: mvm: add fall through comments where neededLuca Coelho1-1/+1
Some switch-cases were missing a fall through comment, so the compiler may warn. Fix that by adding the comments where needed. In other cases there was more text in the comment, which the compiler doesn't recognize, so either remove the extra text or move it to a separate comment line as appropriate. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: fix firmware statistics usageEmmanuel Grumbach1-5/+5
The new (CDB) statistics API is used by non-CDB devices as well. Look at the right TLV flag to know which version of the statistics notification to use. To avoid confusion, remove the _cdb suffix from the structure name. While at it, remove a structure that was never used. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 678d9b6dddea ("iwlwifi: mvm: update rx statistics cmd api") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: don't check if a pointer is set if it can't be unsetEmmanuel Grumbach1-20/+17
We used to have many versions of statistics notification coming from the firmware. In one of the cleanup patches, we forgot to clean the code that checks if data->general is set. Since it is always set, remove the check. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: group trigger condition to helper functionSara Sharon1-18/+11
The triplet of get trigger, is trigger enabled and is trigger stopped repeats itself. Group them in a function to avoid code duplication. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: detect U-APSD breaking aggregationJohannes Berg1-0/+47
Try to detect that the AP is not using aggregation even when there's enough traffic to make it worthwhile; if this is the case and U-APSD is enabled then assume the AP is broken (like so many) and doesn't enable aggregation when U-APSD is used. In this case, disconnect from the AP and blacklist U-APSD for a potential new connection to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: add traffic condition monitoring (TCM)Luca Coelho1-3/+57
Traffic condition monitor gathers data about the traffic load and other conditions and can be used to make decisions regarding latency, throughput etc. This patch introduces the code and data structures to collect this data for future use. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: support RX flags API changeSara Sharon1-1/+3
Latest firmware calculates both phases of the TKIP field, so the TTAK ok flag is not needed and deprecated. Support this API change. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: introduce new API for rate scalingGregory Greenman1-1/+1
New devices will have rate scaling algorithm running in the firmware. With this feature, the driver's responsiblity is to provide an initial configuration and to handle notifications regarding recent rates and some other parameters. Debugfs hooks will be still available for reading the current rate/statistics and setting a fixed rate. The old API is supported so far, though both APIs cannot be used simultaneously. This is the first patch in the series. It adds a new TLV specifying FW support for the new API and updates lq_sta to support two types of rate scaling. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-25iwlwifi: mvm: check for short GI only for OFDMSara Sharon1-1/+2
This bit will be used in CCK to indicate short preamble. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo1-1/+3
Mark Brown reported that there are conflicts in iwlwifi between the two trees so fix those now.
2017-10-06iwlwifi: mvm: warn on invalid statistics sizeJohannes Berg1-4/+3
Getting the wrong statistics size is a problem, having a warning will help us catch it quicker during firmware/driver development. In released firmware/driver versions, we obviously make sure this won't happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06iwlwifi: mvm: do not print security error in monitor modeShaul Triebitz1-1/+3
In monitor mode we are not expected to decrypt encrypted packets (not having the keys). Hence we are expected to get an unknown rx security status. Keeping the print in monitor mode causes a print for each captured packet flooding the dmesg. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: refactor firmware debug codeJohannes Berg1-5/+6
Split out the firmware debug code to be more general, so that it can be used by different subdrivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: mvm: update rx statistics cmd apiLiad Kaufman1-30/+53
The API has changed - update the code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-1/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28Merge tag 'mac80211-next-for-davem-2017-04-28' of ↵David S. Miller1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of patches for -next: * API support for concurrent scheduled scan requests * API changes for roaming reporting * BSS max idle support in mac80211 * API changes for TX status reporting in mac80211 * API changes for RX rate reporting in mac80211 * rewrite monitor logic to prepare for BPF filters * bugfix for rare devices without 2.4 GHz support * a bugfix for recent DFS changes * some further cleanups The API changes are actually at a nice time, since it's typically quiet just before the merge window, and trees can be synchronized easily during it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg1-1/+1
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg1-5/+5
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg1-12/+12
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25iwlwifi: mvm: support new rate flagsSara Sharon1-2/+2
Rates were changed to adapt to HE. Change is backward compatible. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: dump frames early on invalid rateSara Sharon1-3/+10
Currently when rate isn't found (invalid rate or CCK rate in high band) driver is assigning rate -1, which causes mac80211 to dump it later with the cryptic rate value of 0xFF. Instead, warn early and dump the frame in mvm. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: remove unnecessary label in iwl_mvm_handle_rx_statistics()Luca Coelho1-8/+5
The "invalid" label was a bit ugly and unnecessary. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: move new API code to the endGoodstein, Mordechay1-33/+36
By moving all the code that depends on the new API we avoid unnecessary indentation in the code. Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: prepare for station count changeSara Sharon1-2/+2
In a000 devices we will support up to 32 stations. The max station define is used also for invalid station marking which makes finding usages of actual maximum station pretty hard to sort through - change it to be a different define in order to make future changes easier. Use also ARRAY_SIZE intead of define when possible. Do not move yet to 32 stations until firmware do it though. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: fix RX SKB header size and align it properlyJohannes Berg1-3/+15
When receiving a frame, we currently pull in sizeof(*hdr) plus some extra (crypto/snap), which is too much, most headers aren't actually sizeof(*hdr) since that takes into account the 4-address format but doesn't take into account QoS. As a result, a typical frame will have 4 bytes of the payload in the SKB header already. Fix this by calculating the correct header length, and now that we have that, align the end of the SKB header to a multiple of 4 so that the IP header will be aligned properly when pulled in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-02-10Merge tag 'mac80211-next-for-davem-2017-02-09' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more updates: * use shash in mac80211 crypto code where applicable * some documentation fixes * pass RSSI levels up in change notifications * remove unused rfkill-regulator * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08mac80211: Pass new RSSI level in CQM RSSI notificationAndrzej Zaborowski1-0/+2
Extend ieee80211_cqm_rssi_notify with a rssi_level parameter so that this information can be passed to netlink clients in the next patch, if available. Most drivers will have this value at hand. wl1251 receives events from the firmware that only tell it whether latest measurement is above or below threshold so we don't pass any value at this time (parameter is 0). Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-03iwlwifi: mvm: support new statistics APIsSara Sharon1-18/+52
For CDB arch there is another auxiliary mac. Support statistics APIs that were changed to reflect that. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: remove unused variable in iwl_mvm_handle_statistics()Luca Coelho1-2/+0
The temperature variable is set but not used in iwl_mvm_handle_statistics(). Remove it to avoid the following compiler warning when W=1 is used: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/rx.c: In function ‘iwl_mvm_handle_rx_statistics’: /home/luca/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/mvm/rx.c:759:6: warning: variable ‘temperature’ set but not used [-Wunused-but-set-variable] u32 temperature; ^ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: support new statistics notificationSara Sharon1-2/+24
For 9000 family we will get extended statistics notification with averaged data for RSSI, TCM and rogue AP detection. Support it. Future patches will added the required algorithms. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: remove an unused variableDan Carpenter1-3/+2
We never initialize ampdu_status so it causes a static checker warning when we pass it to iwl_mvm_pass_packet_to_mac80211(). Fortunately, it's never used so we can just remove it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-01iwlwifi: mvm: Support CSA countdown offloadingAndrei Otcheretianski1-2/+11
Add support CSA countdown offloading. When CSA starts, the driver specifies the offsets to the eCSA and CSA IEs in the beacon template command and the fw performs the countdown. The fw notifies the driver when the channel switch flow should be performed. Beacon sent notifications are not used anymore. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: add a new mvm reference type for RX dataLuca Coelho1-0/+15
When a data packet is received, we need to make sure that we stay awake until it can be processed and wait a while before trying to enter runtime_suspend os system_suspend again. To do so, add a new reference type for RX data and take the reference when sending the packet to mac80211. We only do this for data packets, all the other RX packets sent by the firmware (e.g. notifications) are not a reason to prevent suspend. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: pass station to mac80211 RX where knownJohannes Berg1-3/+8
When we've already looked up the transmitter station, we can just pass it to mac80211 using the new ieee80211_rx_napi(). This saves the overhead of looking it up in mac80211 again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg1-1/+1
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-02 15:33:40 +0000