summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-05iwlwifi: mvm: add notification size checksJohannes Berg1-9/+9
We shouldn't trust the firmware with the sizes (or contents) of notifications, accessing too much data could cause page faults if the data doesn't fit into the allocated space. This applies more on older NICs where multiple notifications can be in a single RX buffer. Add a general framework for checking a minimum size of any notification in the RX handlers and use it for most. Some RX handlers were already checking and I've moved the checks, some more complex checks I left and made them _NO_SIZE for the RX handlers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.3e155d5e5f90.I2121fa4ac7cd7eb98970d84b793796646afa3eed@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-11iwlwifi: mvm: Fix fall-through warnings for ClangGustavo A. R. Silva1-1/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly using the fallthrough pseudo-keyword as a replacement for a number of "fall through" markings. Notice that Clang doesn't recognize "fall through" comments as implicit fall-through. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201117135053.GA13248@embeddedor
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-62/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: follow the new inclusive terminologyEmmanuel Grumbach1-5/+5
The new inclusive terminology requires to change a few terms that were used in iwlwifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: add support for 6GHzLuca Coelho1-0/+17
Add support to the 6GHz band (aka. Ultra High Band or UHB). This allows us to scan and connect to channels in that band, including all the relevant features, such as preferred scan channels, colocated channels etc. Co-developed-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Co-developed-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Tova Mussai <tova.mussai@intel.com> Co-developed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Co-developed-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Signed-off-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-11-07wireless: remove unneeded breakTom Rix1-2/+0
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020125841.26791-1-trix@redhat.com
2020-10-08iwlwifi: mvm: re-enable TX after channel switchSara Sharon1-3/+1
The FW relies on the re-enablement of the TX in order to know it can exit quiet mode. Currently in case of CSA with quiet mode, the quiet mode is never cancelled, resulting in a complete traffic hang. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.fee389c83ded.I09550fdadb61f899242d7e7b7578672372e2b7fe@changeid
2020-10-08iwlwifi: mvm: get number of stations from TLVNathan Errera1-1/+1
FW is changing the max number of supported stations. To adapt to the change we get the max number from the TLV and act according to the new number. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
2020-10-01iwlwifi: mvm: set PROTECTED_TWT in MAC data policyShaul Triebitz1-5/+7
If Protected-TWT is supported by BSS and by us, set the PROTECTED_TWT bit in the data_policy in the MAC context command. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200911204056.e5e36b41fbd7.I25be500451890be2165fa56cbe0b0a600b4a2a9e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin1-3/+3
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-25iwlwifi: mvm: Invert the condition for OFDM rateTova Mussai1-4/+3
OFDM rate used for all bands except to band 2.4 which use CCK rate. Inverting the condition help that in future we won't need to expand the condition for more bands. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: add notification for missed VAPLior Cohen1-0/+23
A missed VAP notification will be sent from umac when the station is out of sync with its associated non-transmitted BSSID. The notification will be sent only if the transmitted BSSID is an EMA-AP one. The driver will consider this notification as connection loss. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: support FW notification dumping in case of missed beaconShahar S Matityahu1-1/+2
Pass the FW notification packet to the dump collection flow to allow the driver to include it in the dump file if requested. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: remove apply point, switch to time point APIShahar S Matityahu1-2/+3
Remove the "apply points" mechanism as preparation for the changed debug API where this is now a "time point" instead. Use a new API across the code at the trigger points ("time points"), but don't yet implement it since that requires some more preparation. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: separate cfg and dump flows to different modulesShahar S Matityahu1-1/+1
separate configuration flows and dump collection flows. make ini configuration flows be in iwl-dbg-tlv.c and dump related flows in dbg.c to better reflect their logical difference. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: simplify the channel switch flow for newer firmwareEmmanuel Grumbach1-1/+3
Any firmware that supports the new channel switch flow is able to close / re-open the queues when needed. It takes into account the channel switch mode etc... Don't open / close the queues or enable / disable beacon abort before and after the channel switch in case the firmware is able to do this by itself. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-08-20iwlwifi: mvm: Allow multicast data frames only when associatedIlan Peer1-3/+30
The MAC context configuration always allowed multicast data frames to pass to the driver for all MAC context types, and in the case of station MAC context both when associated and when not associated. One of the outcomes of this configuration is having the FW forward encrypted multicast frames to the driver with Rx status indicating that the frame was not decrypted (as expected, since no keys were configured yet) which in turn results with unnecessary error messages. Change this behavior to allow multicast data frames only when they are actually expected, e.g., station MAC context is associated etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-29iwlwifi: mvm: remove MAC_FILTER_IN_11AX for AP modeLuca Coelho1-3/+0
The FW API was clarified saying that this flag should only be set in BSS client mode. Remove it from the MAC_CTXT command we send in AP and GO modes. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 3b5ee8dd8bb1 ("iwlwifi: mvm: set MAC_FILTER_IN_11AX in AP mode") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: make the usage of TWT configurableEmmanuel Grumbach1-1/+1
TWT is still very new and we expect issues. Make its usage configurable and disable it by default. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: correctly fill the ac array in the iwl_mac_ctx_cmdNaftali Goldstein1-5/+6
The indexes into the ac array in the iwl_mac_ctx_cmd are from the iwl_ac enum and not the txfs. The current code therefore puts the edca params in the wrong indexes of the array, causing wrong priority for data-streams of different ACs. Fix this. Note that this bug only occurs in NICs that use the new tx api, since in the old tx api the txf number is equal to the corresponding ac in the iwl_ac enum. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: Don't sleep in RX pathAndrei Otcheretianski1-1/+1
Don't use cancel_delayed_work_sync() inside the channel switch notifications as they are handled synchronously as part of the RX path. Fix that by replacing it with cancel_delayed_work(). This should be safe as we don't really care whether the work is already started and in such case we would disconnect anyway. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: use correct GP2 register address for 22000 familyAvraham Stern1-3/+1
The device time register address has changed for 22000 devices. Add a util function for getting the GP2 time and use the correct register address depending on the device family. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: remove buggy and unnecessary hw_queue initializationJohannes Berg1-33/+3
After converting the driver to TXQs, it no longer has any reason to initialize vif->hw_queue/vif->cab_queue since it no longer sets the HW_QUEUE_CONTROL flag. Remove the code that initialized those, it was broken due to relying on an uninitialized stack value in used_hw_queues, as Colin reported. Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: disconnect in case of bad channel switch parametersSara Sharon1-3/+4
In case we receive channel switch announcement with immediate quiet and unknown switching time, we will switch when FW identifies AP left channel. However, if AP remains on channel, we will eventually get TX queue hang. Init a work to disconnect if switch doesn't occur within 1500 milliseconds. Do it also for a too long channel switch. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: support non-transmitting APSara Sharon1-0/+3
Add an option to not send beacons and probe responses. This is used for testing multiple-bssid. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: reject new beacons when in inject modeSara Sharon1-0/+5
Verify we do not accept new beacon templates while beacon injection is active. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: support beacon IE injectionSara Sharon1-11/+11
This is useful for automated tests. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: config mac ctxt to HE before TLCLiad Kaufman1-2/+1
If we have a station connecting HE, make sure that the MAC ctxt is updated with indication of this before setting the TLC rates via the TLC manager command. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: support new format for the beacon notificationEmmanuel Grumbach1-12/+23
The firmware is changing the format of the beacon notification to remove the dependency on the Tx response format. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: support CHANNEL_SWITCH_TIME_EVENT_CMD commandSara Sharon1-21/+37
When we do channel switch, we used to schedule time events ourselves. This was offloaded to FW. Support the new command and flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: Disconnect on large beacon lossAndrei Otcheretianski1-2/+3
Some buggy APs stop sending beacons, but continue to ack our null data packets or even run some traffic. It's better not to stick connected to such an AP forever, so disconnect after some larger beacon loss threshold is crossed. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: add an option to dereference vif by idSara Sharon1-55/+44
Currently whenever we get firmware notification with mac id, we iterate over all the interfaces to find the ID. This is a bit cumbersome. Instead, adding an array of RCU pointers, like we have for station IDs. This is not expensive space wise since we have only up to 4 active MACs, and not complicated code wise, since we have a clear point to init and de-init it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: fix %16 to %016 print formatJohannes Berg1-1/+1
With just %16, it means 16 characters padding, but we really don't want to print "0x 1F4547B", but instead want to have this filled with zeroes, so we need the 0. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: Do not set RTS/CTS protection for P2P Device MACIlan Peer1-2/+0
As this is not needed and might cause interoperability issues during pairing with devices that would not reply to RTS frames. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: support mac80211 TXQs modelSara Sharon1-71/+1
Move to use the new mac80211 TXQs implementation. This has quite a few benefits for us. We can get rid of the awkward mapping of DQA to mac80211 queues. We can stop buffering traffic while waiting for the queue to be allocated. We can also use mac80211 AMSDUs instead of building it ourselves. The usage is pretty simple: Each ieee80211_txq contains iwl_mvm_txq. There is such a queue for each TID, and one for management frames. We keep having static AP queues for probes and non-bufferable MMPDUs, along with broadcast and multicast queues. Those are being used from the "old" TX invocation path - iwl_mvm_mac_tx. When there is a new frame in a TXQ, iwl_mvm_mac_wake_tx is being called, and either invokes the TX path, or allocates the queue if it does not exist. Most of the TX path is left untouched, although we can consider cleaning it up some more, for example get rid of the duplication of txq_id in both iwl_mvm_txq and iwl_mvm_dqa_txq_info. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: rely on mac80211 to configure TWT supportEmmanuel Grumbach1-20/+2
Mac80211 will check both the HE Capability IE and the Extended Capability IE, so set the TWT support bit when mac80211 tells us to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: activate apply pointsSara Sharon1-0/+2
Call the previously introduced apply points entry point when reaching an apply point. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: set MAC_FILTER_IN_11AX in AP modeShaul Triebitz1-0/+3
In AP mode, if AP supports 11ax, add the MAC_FILTER_IN_11AX flag in MAC_CTXT command (needed for various 11ax stuff). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: add support for TWT capabilitiesEmmanuel Grumbach1-1/+23
We need to check the TWT support of the peer and to propagte the capability to the firmware. The current implementation will enable TWT only if the TWT support is advertised in the HE CAP IE and in the Extended Capability IE. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: mvm: remove assignment of the reciprocalEmmanuel Grumbach1-12/+0
The firmware stopped looking at this field long ago. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: mvm: switch management tx antenna only on tx failureAvraham Stern1-5/+2
Switch the antenna used for management tx only if previous tx failed. If previous tx succeeded, there is no reason to switch antennas. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: group trigger condition to helper functionSara Sharon1-9/+3
The triplet of get trigger, is trigger enabled and is trigger stopped repeats itself. Group them in a function to avoid code duplication. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: use correct FIFO lengthSara Sharon1-0/+4
Current FIFO size calculation is wrong for two reasons: - We access lmac 0 by default - We don't take 11ax into consideration. Fix both. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: add NOA and CSA to a probe responseGregory Greenman1-0/+61
A probe response built by a P2P GO should contain: 1. CSA/eCSA IE when relevant 2. If the corresponding probe request had P2P IE, then need to add P2P IE with NOA attributes. However, the NOA attributes and the updated channel switch counter are known only to the FW. The solution is that FW will send a notification with the relevant probe response data and the driver will save it and update the probe response accordingly. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add module parameter to disable 802.11axLuca Coelho1-1/+2
Add a module parameter to disable 802.11ax features in supported devices. This is useful for testing or if there are interoperability issues with some APs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add support for IEEE802.11axLuca Coelho1-0/+3
Add support for the HE in the iwlwifi driver conforming with P802.11ax_D2.0. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-02-16iwlwifi: mvm: fix IBSS for devices that support station type APISara Sharon1-1/+2
In IBSS, the mac80211 sets the cab_queue to be invalid. However, the multicast station uses it, so we need to override it. A previous patch did it, but it was nested inside the if's and was applied only for legacy FWs that don't support the new station type API, instead of being applied for all paths. In addition, add a missing NL80211_IFTYPE_ADHOC to the initialization of the queues in iwl_mvm_mac_ctxt_init() Fixes: ee48b72211f8 ("iwlwifi: mvm: support ibss in dqa mode") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-25iwlwifi: mvm: fix packet injectionEmmanuel Grumbach1-1/+1
We need to have a station and a queue for the monitor interface to be able to inject traffic. We used to have this traffic routed to the auxiliary queue, but this queue isn't scheduled for the station we had linked to the monitor vif. Allocate a new queue, link it to the monitor vif's station and make that queue use the BE fifo. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=196715 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: support new beacon template commandHaim Dreyfuss1-13/+34
Support a new version of the beacon template command. This replaces v8 of the command, which was missing the rate code. Also, export rate decision logic to a separate function. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-08 22:11:50 +0000