summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/iwl-9000.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-29iwlwifi: move configuration into sub-directoryJohannes Berg1-214/+0
Since we now support 8 device families, move their configuration files into a new subdirectory "cfg". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: bump max FW API to 31Luca Coelho1-1/+1
Bump the maximum accepted firmware API number for devices in the 8000, 9000 and A000 families. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: add 9000 and A000 device familiesSara Sharon1-1/+1
Add two new device families to differentiate them from 8000. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: add dbgc_supported to transport configurationSara Sharon1-1/+2
Use transport configuration to determine DBGC support instead of relying on device family. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: cleanup references to 8000 family in NVM codeSara Sharon1-1/+2
NVM code is tightly coupled with 8000 family, while it really refers to extended NVM format introduced back then. Separate it to a configuration dependent boolean, and rename defines accordingly. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02iwlwifi: Add fw_name_pre_rf_next_step to support different rf stepsHaim Dreyfuss1-0/+6
Integrated chip may have different HW and RF steps. Currently, the driver supports only different HW steps. Add logic to support different RF steps enables combining different HW and RF steps. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: change TX_CMD_SEC_KEY_FROM_TABLE valueDavid Spinadel1-1/+1
Change the value of TX_CMD_SEC_KEY_FROM_TABLE flag in TX_CMD security flags to accommodate a FW API change. Bump min API for 9000 series devices to 30 to keep the driver aligned aligned the FW. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: add support for 9000 HW B-step NICsLiad Kaufman1-9/+16
Once we remove support for A-step, we'll be able to clean the code back again. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: bump max API to 30Luca Coelho1-1/+1
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: remove support for deprecated RFLuca Coelho1-19/+0
One of the RF modules we support has been deprecated and never released publicly. Remove support for this module. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-01-26iwlwifi: mvm: bump max API to 28Luca Coelho1-1/+1
We skipped one release, so bump twice, to 28. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: remove support for fw older than -17 and -22Luca Coelho1-1/+1
FW versions older than -17 for 3160 and 7260 and older than -22 for newer NICs are not supported anymore. Don't load these versions and remove code that handles them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-16iwlwifi: mvm: bump max API to 26Emmanuel Grumbach1-1/+1
The driver now support version 26 of the firmware APIs. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-16iwlwifi: add the new 9560 seriesOren Givon1-0/+11
Add a new config struct for the new 9560 series and add the 4 new PCI IDs for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: add the new 9170 seriesOren Givon1-0/+10
Add a new config struct for the new 9170 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: add the new 9270 seriesOren Givon1-0/+10
Add a new config struct for the new 9270 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: add a new series 9460 with new PCI IDOren Givon1-2/+2
Add a new series to the 9000 series called 9460. In addition, add a new PCI ID that is the 9460 new series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: rename and reorder 9000 series configuration structsOren Givon1-31/+32
Rename and reorder the 9000 series configuration structs: - struct containing configuration of 5165 was renamed to 9000. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-11iwlwifi: mvm: bump MAX firmware API for mvm devicesLuciano Coelho1-1/+1
The driver is now ready to load the new firmware versions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-01iwlwifi: pcie: workaround HW shadow registers bugSara Sharon1-0/+1
Integrated 9000 devices have a bug with shadow registers value retention. If driver writes RBD registers while MAC is asleep the values are stored in shadow registers to be copied whenever MAC wakes up. However, in 9000 devices a MAC wakeup is not triggered and when the bus powers down due to inactivity the shadow values and dirty bits are lost. Turn on the chicken-bits that cause MAC wakeup for RX-related values as well when the device is in D0. When the device is in low power mode turn the RX wakeup chicken bits off since driver is idle and this W/A is not needed. Remove previous W/A which was ineffective. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: make configuration structs smallerJohannes Berg1-1/+0
Since we have a lot of configuration structs (almost 70) saving some memory in each one of them leads to an overall saving of ~2.6KiB of memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: allow combining different phy images with mac imagesHaim Dreyfuss1-3/+26
Currently there is one to one function between device id to it's ucode. The new generation devices allows to combine different phy and mac images. Now we have two different ucode images with the same device id. Read RF ID to identify phy image and overwrite it if needed. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: Rename 9560 to 9260 and add new PCI IDs for itHaim Dreyfuss1-2/+2
Rename 9560 to 9260. Add new PCI ID for 9260 and change some entries from 5165 to 9260. Also order the 9000 series. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg1-1/+1
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-30iwlwifi: remove IWL_*_UCODE_API_OKEmmanuel Grumbach1-5/+1
_UCODE_API_OK was a intermediate version between MIN and MAX. If a user had a firmware below _OK but above _MIN, the driver would work but the user would get a warning in the kernel log telling him to update his firmware. This is not needed since most users won't look for these messages in the kernel log if their wifi is working. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-30iwlwifi: mvm: enable TCP/UDP checksum support for 9000 familySara Sharon1-0/+1
Declare and enable support of RX and TX checksum for 9000 family. Configure offload_assist in the TX cmd accordingly to support TX csum. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-30iwlwifi: remove support for fw older than -16.ucodeSara Sharon1-2/+2
API version lower than 16 is not supported anymore - don't load older ucode. Remove code handling older versions. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-30iwlwifi: 9000: update device id and FW serial numberHaim Dreyfuss1-4/+4
Update device id and FW serial number for 2X2 antenna devices in 9000 generation product. These will not be available on the market in the coming year. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-09iwlwifi: add support for getting HW address from CSRSara Sharon1-1/+2
From 9000 family on, we need to get HW address from host CSR registers. OEM can override it by fusing the override registers - read those first, and if those are 0 - read the OTP registers instead. In addition - bail out if no valid mac address is present. Make it shared for all NICs. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: enable VHT MU-MIMO for supported hardwareSara Sharon1-1/+2
Incoming hardware will support VHT MU-MIMO. Declare this capability for relevant hardware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: bump firmware API to 21Emmanuel Grumbach1-1/+1
The driver is now ready to handle this firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-31iwlwifi: pcie: add 9000 series multi queue rx DMA supportSara Sharon1-1/+2
The 9000 series introduces several changes in the device DMA operation. As the device now supports multi-queue rx, several DMA channels should be configured. The flows of providing the device with the allocated RBDs now changes as well - the device maintains a separate table of used and free table. The hardware may use the free table to feed RBDs to any queue. This requires maintaing a shared table to map returned RBDs to the original RXB - for that purpose the VID is introduced - an internal identifier of the RB placed in the lower 12 bits and returned by HW in the used data. Another change is the support of 64 bit DMA address. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: bump max API to 20Emmanuel Grumbach1-1/+1
7265D and up are now able to handle -20.ucode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: 9000: increase the number of queuesEmmanuel Grumbach1-1/+1
9000 family devices have 31 queues. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-01iwlwifi: Add new PCI IDs for 9260 and 5165 seriesDreyfuss, Haim1-0/+163
Add 9000-family configuration to iwl_cfg struct Add a new struct to define the 5165 series. Rename the struct that defines the 9000 series to 9260. Add some new sub-system IDs for the 9260 and 5165 series. For 9260: 0x0A10, 0x0000, 0x0510, 0x0710, 0x0410, 0x0610. For 5165: 0x2A10, 0x2010, 0x0310, 0x0210. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-16 17:12:54 +0000