summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/cfg
AgeCommit message (Collapse)AuthorFilesLines
2019-09-06iwlwifi: mvm: add support for single antenna diversityHaim Dreyfuss1-0/+1
There are products which have a single chain with 2 antennas. In these products, we need to inform the FW that the device has the single antenna diversity(SAD) feature. In the future, we will read the active antenna from a BIOS configuration. Currently, we use a default configuration which means that the FW decides which antenna to use. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho8-83/+83
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: remove unnecessary IWL_DEVICE_AX200_COMMON definitionLuca Coelho1-5/+2
Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used once and relies mostly on IWL_DEVICE_22000_COMMON anyway. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: remove duplicate FW string definitionsLuca Coelho1-4/+0
The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with IWL_22000_QU_B_HR_B_FW_PRE. Remove the former to avoid confusion. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: bump FW API to 50 for 22000 seriesLuca Coelho1-1/+1
Start supporting API version 50 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: bump FW API to 49 for 22000 seriesLuca Coelho1-1/+1
Start supporting API version 49 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-08-29iwlwifi: pcie: handle switching killer Qu B0 NICs to C0Luca Coelho1-0/+24
We need to use a different firmware for C0 versions of killer Qu NICs. Add structures for them and handle them in the if block that detects C0 revisions. Additionally, instead of having an inclusive check for QnJ devices, make the selection exclusive, so that switching to QnJ is the exception, not the default. This prevents us from having to add all the non-QnJ cards to an exclusion list. To do so, only go into the QnJ block if the device has an RF ID type HR and HW revision QnJ. Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-15iwlwifi: pcie: add support for qu c-step devicesLuca Coelho1-0/+53
Add support for C-step devices. Currently we don't have a nice way of matching the step and choosing the proper configuration, so we need to switch the config structs one by one. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24iwlwifi: change 0x02F0 fw from qu to quzIhab Zhaika1-0/+88
change the fw of 0x02F0 platform from qu to quz Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24iwlwifi: add new cards for 22000 and change wrong structsIhab Zhaika1-0/+36
add few PCI ID'S for 22000 and chainge few cards structs names Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24iwlwifi: add new cards for 22000 and fix struct nameIhab Zhaika1-4/+16
add few PCI ID'S for 22000 and fix the wrong name for one of the structs Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322Thomas Gleixner4-48/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 29 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000435.438503728@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of ↵David S. Miller1-18/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+3
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29iwlwifi: bump FW API to 48 for 22000 seriesLuca Coelho1-1/+1
Start supporting API version 48 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: fix driver operation for 5350Emmanuel Grumbach1-1/+2
We introduced a bug that prevented this old device from working. The driver would simply not be able to complete the INIT flow while spewing this warning: CSR addresses aren't configured WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917 iwl_pci_probe+0x160/0x1e0 [iwlwifi] Cc: stable@vger.kernel.org # v4.18+ Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c8f1b51e506d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: remove unused 0x40C0 PCI device IDsLuca Coelho1-17/+0
This device ID and device type was never released, so we can remove it from the PCI IDs list. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: bump FW API to 47 for 22000 seriesLuca Coelho1-1/+1
Start supporting API version 47 for 22000 series. The 9000 series is now frozen on version 46. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-18Merge tag 'wireless-drivers-next-for-davem-2019-04-18' of ↵David S. Miller2-6/+26
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Nothing really special standing out this time, iwlwifi being the most active driver. Major changes: iwlwifi * send NO_DATA events so they can be captured in radiotap * support for multiple BSSID * support for some new FW API versions * support new hardware * debugfs cleanups by Greg-KH qtnfmac * allow each MAC to specify its own regulatory rules ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18iwlwifi: cfg: use family 22560 based_params for AX210 familyShaul Triebitz1-1/+1
Specifically, max_tfd_queue_size should be 0x10000 like in 22560 family and not 0x100 like in 22000 family. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: set 512 TX queue slots for AX210 devicesShaul Triebitz1-1/+2
AX210 devices support 256 BA (256 MPDUs in an AMPDU). The firmware requires that the number of TFDs will be minimum twice as big as the BA size (2 * 256 = 512). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: use correct GP2 register address for 22000 familyAvraham Stern1-2/+4
The device time register address has changed for 22000 devices. Add a util function for getting the GP2 time and use the correct register address depending on the device family. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add monitor header to smem monitorShahar S Matityahu2-4/+12
Add write pointer and cycle count registers to smem monitor header. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: add support for quz firmwaresLuca Coelho1-2/+16
Add a new configuration with a new firmware name for quz devices. And, since these devices have the same PCI device and subsystem IDs, we need to add some code to switch from a normal qu firmware to the quz firmware. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: for AX210 device support radio GF4Shaul Triebitz1-0/+7
Add support for radio gf4 (CDB radio). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: add support for 6-7 GHz channelsShaul Triebitz1-0/+2
Add UHB (ultra high band) channels and use 16 bit variables to fit the new channels. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: rename structs to fit the new namesIhab Zhaika1-6/+6
rename few structs to fit the new marketing names Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: add new cards for 22000 and killer series and change the market nameIhab Zhaika1-4/+4
Add a few PCI ID'S for 22000 and killer series in addition to chainging the marketing name. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: start using B-step for some 9000 devicesLuca Coelho1-17/+19
We don't support A-step for some device combinations anymore. So change them to use B-step, renaming and reorganizing the config structures. Additionally, fix one device that was using the wrong configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: align to new periphery address space for AX210 familyShaul Triebitz1-3/+7
In AX210 family, UMAC periphery address space moved from 0xA00000 to 0xD00000. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: bump FW API to 46 for 9000 and 22000 seriesJohannes Berg2-2/+2
Start supporting API version 46 where applicable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: introduce device family AX210Shaul Triebitz1-0/+47
Add new device family AX210. Make the needed changes for this family. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: bump FW API to 45 for 9000 and 22000 seriesLuca Coelho2-2/+2
Start supporting API version 45 where applicable. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: implement BISR HW workaround for 22260 devicesJohannes Berg1-0/+3
There's a small hardware bug in 22260 devices which thus require a few more delays during initialization. Implement this workaround. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: bump FW API to 44 for 9000 and 22000 seriesLuca Coelho2-2/+2
Start supporting API version 44 where applicable. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: update product name for 9260 and 9560Ihab Zhaika2-0/+35
update the product name for the some of the cards from the series of 9260 and 9560 Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: remove support for 9000 A-step devicesLuca Coelho1-76/+34
We don't support 9000 A-step devices anymore, so we can remove support for loading both the a0/a0 and a0/b0 FWs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: add new cards for 22560, 9260 and killer seriesIhab Zhaika1-0/+24
add few PCI ID'S for 22560, 9260 and killer series. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: correct one of the PCI struct namesIhab Zhaika1-2/+2
One of the cfg struct names is mistakenly "iwl22000", when it should be "iwl22560". Chage-Id: If9fbfa4bceef81d028c90c98d47115fbe39da547 Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Fixes: 2f7a3863191a ("iwlwifi: rename the temporary name of A000 to the official 22000") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: add PCI IDs for the 22260 device seriesLuca Coelho1-0/+40
Add new structs and PCI IDs for 22260 devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-20iwlwifi: bump the API version to 43 for 9000 and 22000Luca Coelho2-2/+2
Bump the API version to 43 for 9000 and 22000 devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-14iwlwifi: remove all unnecessary occurrences of nvm_calib_verLuca Coelho4-31/+0
Now that nvm_calib_ver is not checked in opmodes other than dvm, we can remove it from all irrelevant configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: remove useless NVM_HW_SECTION_NUM_FAMILY_* macrosLuca Coelho4-11/+4
These macros are useless because each one of them is used only once and the element they are assigned to is already pretty clear about what they mean, "nvm_hw_section_num". Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per sizeLuca Coelho7-11/+11
Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the actual values, since these 3 are the same. Redefine the values per size so it's easier to understand and compare the different configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: move common 9000 cfg parameters to common macroLuca Coelho1-73/+6
The ht_params, nvm_ver, nvm_calib_ver and max_ht_ampdu_exponent elements in 9000 devices are always the same. Move them to the common macro. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-23iwlwifi: fix cfg structs for 22000 with different RF modulesLuca Coelho1-1/+0
We have to choose different configuration and different firmwares depending on the external RF module that is installed. Since the external module is not represented in the PCI IDs, we need to change the configuration at runtime, after checking the RF ID of the module installed. We have a bit of a mess in the code that does this, because it applies cfg's according to the RF ID only, ignoring the integrated module that is in use. Fix that for some devices by adding correct configurations for them and not ignoring the integrated module's type when making the decision. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-07Merge tag 'wireless-drivers-next-for-davem-2018-10-07' of ↵David S. Miller2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.20 Second set of patches for 4.20. Heavy refactoring on mt76 continues and the usual drivers in active development (iwlwifi, qtnfmac, ath10k) getting new features. And as always, fixes and cleanup all over. Major changes: mt76 * more major refactoring to make it easier add new hardware support * more work on mt76x0e support * support for getting firmware version via ethtool * add mt7650 PCI ID iwlwifi * HE radiotap cleanup and improvements * reorder channel optimization for scans * bump the FW API version qtnfmac * fixes for 'iw' output: rates for enabled SGI, 'dump station' * expose more scan features to host: scan flush and dwell time * inform cfg80211 when OBSS is not supported by firmware wlcore * add support for optional wakeirq ath10k * retrieve MAC address from system firmware if provided * support extended board data download for dual-band QCA9984 * extended per sta tx statistics support via debugfs * average ack rssi support for data frames * speed up QCA6174 and QCA9377 firmware download using diag Copy Engine * HTT High Latency mode support needed by SDIO and USB support * get STA power save state via debugfs ath9k * add reset functionality for airtime station debugfs file ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06iwlwifi: bump firmware API version for 9000 and 22000 series devicesJohannes Berg2-2/+2
Bump the firmware API version to 41. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28iwlwifi: fix non_shared_ant for 22000 devicesErel Geron1-1/+1
The non-shared antenna was wrong for 22000 device series. Fix it to ANT_B for correct antenna preference by coex in MVM driver. Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support") Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-11 19:09:52 +0000