summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2013-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27ath9k: avoid queueing hw check work when suspendedLuis R. Rodriguez1-1/+2
The following issue was reported. WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x32/0x40 [mac80211]() Hardware name: iMac12,1 queueing ieee80211 work while going to suspend Pid: 0, comm: swapper/0 Tainted: PF O 3.8.2-206.fc18.x86_64 #1 Call Trace: Mar 16 09:39:17 Parags-iMac kernel: [ 3993.642992] <IRQ> [<ffffffff8105e61f>] warn_slowpath_common+0x7f/0xc0 [<ffffffffa0581420>] ? ath_start_rx_poll+0x70/0x70 [ath9k] <ffffffff8105e716>] warn_slowpath_fmt+0x46/0x50 [<ffffffffa045b542>] ieee80211_can_queue_work.isra.7+0x32/0x40 Fix this by avoiding to queue the work if our device has already been marked as suspended or stopped. Reported-by: Parag Warudkar <parag.lkml@gmail.com> Tested-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-13/+17
Pull to get the thermal netlink multicast group name fix, otherwise the assertion added in net-next to netlink to detect that kind of bug makes systems unbootable for some folks. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20Merge branch 'master' of ↵John W. Linville44-528/+1323
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-03-20ath6kl: fix size_t printf warningsKalle Valo1-7/+7
My new tracing code for ath6kl introduced these warnings on 64-bit: trace.h:38:1: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat] trace.h:61:1: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat] trace.h:84:1: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat] trace.h:119:1: warning: format '%d' expects argument of type 'int', but argument 7 has type 'size_t' [-Wformat] trace.h:173:1: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat] trace.h:193:1: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat] trace.h:221:1: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat] Fix them by using %zd. Reported-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18Merge tag 'for-linville-20130318' of git://github.com/kvalo/ath6klJohn W. Linville18-94/+628
2013-03-18ath9k: limit tx path hang check to normal data queuesFelix Fietkau1-13/+13
The beacon and multicast-buffer queues are managed by the beacon tasklet, and the generic tx path hang check does not help in any way here. Running it on those queues anyway can introduce some race conditions leading to unnecessary chip resets. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k_hw: revert chainmask to user configuration after calibrationFelix Fietkau1-0/+4
The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18Merge branch 'master' of ↵John W. Linville4-9/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/nfc/llcp/llcp.c
2013-03-18ath6kl: Fix a debugfs crash for USB devicesMohammed Shafi Shajakhan1-2/+4
Credit distribution stats is currently implemented only for SDIO. This fixes a crash in debugfs for USB interface. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f91c2048>] read_file_credit_dist_stats+0x38/0x330 [ath6kl_core] *pde = b62bd067 Oops: 0000 [#1] SMP EIP: 0060:[<f91c2048>] EFLAGS: 00210246 CPU: 0 EIP is at read_file_credit_dist_stats+0x38/0x330 [ath6kl_core] EAX: 00000000 EBX: e6f7a9c0 ECX: e7b148b8 EDX: 00000000 ESI: 000000c8 EDI: e7b14000 EBP: e6e09f64 ESP: e6e09f30 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 4058, ti=e6e08000 task=e50cf230 task.ti=e6e08000) Stack: 00008000 00000000 e6e09f64 c1132d3c 00004e71 e50cf230 00008000 089e4000 e7b148b8 00000000 e6f7a9c0 00008000 089e4000 e6e09f8c c11331fc e6e09f98 00000001 e6e09f7c f91c2010 e6e09fac e6f7a9c0 089e4877 089e4000 e6e09fac Call Trace: [<c1132d3c>] ? rw_verify_area+0x6c/0x120 [<c11331fc>] vfs_read+0x8c/0x160 [<f91c2010>] ? read_file_war_stats+0x130/0x130 [ath6kl_core] [<c113330d>] sys_read+0x3d/0x70 [<c15755b4>] syscall_call+0x7/0xb [<c1570000>] ? fill_powernow_table_pstate+0x127/0x127 Cc: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath: changed kmalloc to kmemdupAndrei Epure1-3/+1
Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: Fix the byte alignment rule to avoid loss of bytes in a TCP segmentMyoungje Kim2-5/+7
Either first 3 bytes of the first received tcp segment or last one over MTU size file can be loss due to the byte alignment problem. Although ATH6KL_HTC_ALIGN_BYTES was defined for 'extra bytes for htc header alignment' in the patch "Fix buffer alignment for scatter-gather I/O"(1df94a857), there exists the bytes loss issue which means that it will be truncated 3 bytes in the transmitted file contents if a file which has over MTU size is transferred through TCP/IP stack. It doesn't look like TCP/IP stack bug of 3.5 or the latest version of kernel but the byte alignment issue. This patch is to use the roundup() function for the byte alignment rather than the predefined ATH6KL_HTC_ALIGN_BYTES. kvalo: fixed indentation Signed-off-by: Myoungje Kim <mjei78@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: remove false check from ath6kl_rx()Kalle Valo1-1/+1
Dan found a check from ath6kl_rx() which doesn't make any sense at all: " 1327 if (status || !(skb->data + HTC_HDR_LENGTH)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^ skb->data is a pointer. This pointer math is always going to be false. Should it be testing "packet->act_len < HTC_HDR_LENGTH" or something?" I don't know what the check really was supposed to do, but I think Dan's guess is right. Fix it accordingly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add an extra band check to ath6kl_wmi_beginscan_cmd()Kalle Valo1-0/+3
Dan reported that smatch found a possible issue in ath6kl_wmi_beginscan_cmd() where we might access sc->supp_rates beyond the end. It shouldn't happen as ar->wiphy->bands always have just the first two bands set, but add an extra check just to be sure. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing support to debug message macrosKalle Valo2-4/+50
Now all log messages are sent through the tracing infrastruture as well. Tracing point doesn't follow debug_mask module parameter, instead it sends all debug messages, so once you enable ath6kl_log_dbg tracing point you will get a lot of messages. Needs to be discussed if this is sensible or not. The overhead should be small enough and we anyway include debug level as well so it's easy to filter in user space. I wasn't really sure what to do with ath6kl_dbg_dump() and for now decided that it also sends the buffer to user space. But most likely in the future ath6kl_dbg_dump() should go away in favor of using proper tracing points, but we will see. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing support to log functionsKalle Valo3-0/+41
All log messages are now sent through tracing interface as well if ATH6KL_TRACING is enabled. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: convert ath6kl_info/err/warn macros to real functionsKalle Valo2-7/+54
After this it's cleaner to add trace calls. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: adding tracing points for htc_mboxKalle Valo2-1/+76
Add tracing points for htc layer, just dumping the packets to user space. I wasn't really sure what to do with the status value, it might not always be accurate, but I included it anyway. I skipped htc_pipe (and usb) implementation for now. Need to add those tracepoints later. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing point for hif irqsKalle Valo2-0/+23
Add a tracing point for hif irq and dump the register content to user space. This is in hif.c as we could use the same code also with SPI but, as ath6kl doesn't SPI and most likely never will be, this is used just by SDIO so name the trace point as ath6kl_sdio_irq to make it easier to manage filters. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing points for sdio transfersKalle Valo3-0/+105
Add tracing points for sdio transfers, just dump the address, flags and the buffer. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing support and tracing points for wmi packetsKalle Valo6-0/+125
Add basic tracing infrastructure support to ath6kl and which can be enabled with CONFIG_ATH6KL_TRACING. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: cold reset target after host warm bootKalle Valo2-2/+13
Julien reported that ar6004 usb device fails to initialise after host has been rebooted and power is still on for the ar6004 device. He found out that doing a cold reset fixes the issue. I wasn't sure what would be the best way to detect if target needs a reset so I settled on checking a timeout from htc_wait_recv_ctrl_message(). Reported-by: Julien Massot <jmassot@aldebaran-robotics.com> Tested-by: Julien Massot <jmassot@aldebaran-robotics.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: fix usb related error handling and warningsKalle Valo3-21/+33
It was annoying to debug usb warm reboot initialisation problems as many usb related functions just ignored errors and it wasn't obvious from the kernel logs what was failing. Fix all that so that error messages are printed and errors are handled properly. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: cleanup ath6kl_reset_device()Kalle Valo4-39/+10
Move it to init.c, make it static, remove all useless checks and force it to always do cold reset. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: print firmware capabilitiesKalle Valo1-0/+73
Printin the firmware capabilities during the first firmware boot makes it easier to find out what features firmware supports. Obligatory screenshot: [21025.678481] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3 [21025.678667] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches1-2/+0
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13wil6210: temperature measurementVladimir Kondratiev3-0/+70
Firmware got support for temperature measurement. There are 2 temperature sensors: MAC and radio "not available" temperature - reported by FW as 0 or ~0 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: sync with new firmwareVladimir Kondratiev6-122/+321
Adjust driver for changes in the FW API. Noticeable changes in the FW are: - temperature sensing - infrastructure for multiple connections - infrastructure for P2P - signal strength indication This commit introduces only changes that are required to support same functionality as previous firmware, no new features. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: new SW resetVladimir Kondratiev4-23/+17
New firmware allows for shorter SW reset procedure. After SW reset, FW raises "fw done" IRQ, at this moment mailbox control structures are initialized, driver caches it. New status bit wil_status_reset_done introduced to track completion of the reset. It is set by "fw ready" irq, and required for WMI rx flow to access control structures. WMI Tx flow protected by other status bit, wil_status_fwready. It can't be set before wil_status_reset_done is set by design. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: headers clean-upVladimir Kondratiev6-27/+0
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: use WLAN_CAPABILITY_DMG_TYPE_MASKVladimir Kondratiev1-1/+1
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: fix FW error notificationVladimir Kondratiev1-3/+11
user space get notified through kobject_uevent_env(), that might sleep and thus should run in thread context. Move user space notification to the thread handler, while mark FW is non-functional right in the hard IRQ. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: report all received mgmt framesVladimir Kondratiev1-0/+3
Pass to cfg80211 all management frames. Used by wpa_supplicant. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: use cfg80211_inform_bss_frame()Vladimir Kondratiev1-11/+3
Avoid unnecessary frame parsing Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: refactor connect_workerVladimir Kondratiev3-25/+23
Move wmi_connect_worker() to the main.c and change names for consistency. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: Fix garbage sent to the FW with wmi_set_ie()Vladimir Kondratiev1-1/+1
Extra reference was taken by mistake. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: do not set IE's for beaconVladimir Kondratiev1-2/+7
On the DMG band, there is no 'normal' beacon frame. Instead, transmitted is short 'DMG beacon' frame, that do not include IE's So, beacon IE's are not relevant for the DMG band. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: handle WMI_BA_STATUS_EVENTIDVladimir Kondratiev1-0/+11
Firmware indicated block ack agreement status change. For now, just log it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: handle linkup/linkdown WMI eventsVladimir Kondratiev1-0/+23
Firmware indicates linkup/linkdown when data path becomes ready. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: Remove local implementation of dynamic hexdumpVladimir Kondratiev2-24/+2
This functionality now integrated in kernel, local hack not needed any more Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-09ath6kl: small cleanup in ath6kl_htc_pipe_rx_complete()Dan Carpenter1-2/+1
It's harmless, but Smatch complains if we use "htc_hdr->eid" before doing the bounds check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-08Merge branch 'for-john' of ↵John W. Linville1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-03-06ath9k: Report rx-crc-errors in ethtool stats.Ben Greear1-0/+2
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k: Report txerr-filtered errors in debugfs.Ben Greear2-0/+5
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Fix fixed antenna for AR9462Sujith Manoharan1-0/+17
When the RX chainmask is set to 0x2 for AR9462, certain values from chain1 have to be programmed for chain0 also. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Update initvals for AR9462Sujith Manoharan1-25/+24
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Use helper functions to simplify HW resetSujith Manoharan1-79/+103
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Remove CHANNEL_CW_INTSujith Manoharan3-8/+3
This flag is used for indicating channel interference and we currently do nothing with it, so remove it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath6kl: small cleanup in ath6kl_htc_pipe_rx_complete()Dan Carpenter1-2/+1
It's harmless, but Smatch complains if we use "htc_hdr->eid" before doing the bounds check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 01:54:41 +0000