summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath9k
AgeCommit message (Collapse)AuthorFilesLines
2009-04-21Merge branch 'master' of ↵David S. Miller1-1/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
2009-04-16ath9k: fix access to a freed skb in ath_rx_tasklet()Pavel Roskin1-1/+3
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-13drivers/net: replace BUG() with BUG_ON() if possibleAlexander Beregalov1-5/+1
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27mac80211: unify and fix TX aggregation startJohannes Berg1-1/+1
When TX aggregation becomes operational, we do a number of steps: 1) print a debug message 2) wake the virtual queue 3) notify the driver Unfortunately, 1) and 3) are only done if the driver is first to reply to the aggregation request, it is, however, possible that the remote station replies before the driver! Thus, unify the code for this and call the new function ieee80211_agg_tx_operational in both places where TX aggregation can become operational. Additionally, rename the driver notification from IEEE80211_AMPDU_TX_RESUME to IEEE80211_AMPDU_TX_OPERATIONAL. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: fix dma mapping leak of rx buffer upon rmmodLuis R. Rodriguez1-1/+6
We were claiming DMA buffers on the RX tasklet but never upon a simple module removal. Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27Add mesh point functionality to ath9kPat Erley4-13/+18
This patch enables mesh point operation for ath9k. Tested with b43, ath9k, rt2500usb, and ath5k as peers. Signed-off-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Nuke struct ath_xmit_statusVasanthakumar Thiagarajan2-21/+8
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix bug in reporting status of tx rateVasanthakumar Thiagarajan1-13/+22
This patch updates count of every hw tried rate with appropriate tries before reporting tx status of a frame. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix rate control update for aggregated framesVasanthakumar Thiagarajan1-8/+18
We will miss rate control update if first A-MPDU of an aggregation is not Block Acked as we always tell if the rate control needs to updated through update_rc of first A-MPDU. This patch does rate control update for the first A-MPDU which notifies it's tx status (which is not necessarily the first A-MPDU of an aggregation) to mac80211. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Keep LED on in idle state after associationVasanthakumar Thiagarajan1-6/+13
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Update copyright in all the filesSujith28-28/+28
How time flies. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix bug in handling single stream stationsSujith1-9/+9
AP mode currently sets up the dual stream capability for all stations. This patch fixes it by checking if the associated station supports dual stream MCS rates (8-15). We would disregard any MCS rates above 15, since Atheros HW supports only 0..15 rates currently, and can't receive at rates > 15 anyway. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fill in ack signal in TX statusSujith1-2/+6
This patch fills the ack_signal field in TX status with an appropriate value from the TX descriptor. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Fix bug in 4K EEPROM size calculationSujith1-1/+1
We should be checking with the 4K header and not the non-4K header size. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Change return type for set_board_values()Sujith3-12/+4
We always return true, checking for 'false' return value is bogus anyway, so fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Introduce a helper function for setting board gain valuesSujith1-120/+99
This improves readability. Handle both 4K/non-4K EEPROM in this patch. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Move AR5416_VER_MASK to a common locationSujith2-4/+1
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Miscellaneous EEPROM handling cleanupSujith2-51/+28
Print the EEPROM version/revision on init. Choose appropriate debug masks on error conditions, and remove useless print messages. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: remove dummy PCI "retry timeout" fixLuis R. Rodriguez1-18/+0
Remove the PCI retry timeout code as that was just taken from ipw2100 due to historical reasons but in reality its a no-op, additionally its simply incorrect as each PCI devices has its own custom PCI configuration space on PCI config space >= 0x40. Not to mention we were trying to write 0 to a place that already has 0 on it. Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ben Cahill <ben.m.cahill@intel.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Tested-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Add support for multiple virtual AP interfacesJouni Malinen2-26/+27
This patch fixes the TSF offset calculation for staggered Beacon frames and sets ATH_BCBUF back to the earlier value 4 to enable multi-BSS configurations of up to four BSSes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath9k: Set IEEE80211_TX_CTL_RATE_CTRL_PROBE in rate control for probe rateVasanthakumar Thiagarajan1-0/+2
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-17Merge branch 'master' of ↵David S. Miller16-213/+380
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-03-17Merge branch 'master' of ↵David S. Miller4-3/+57
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/igb/igb_main.c drivers/net/qlge/qlge_main.c drivers/net/wireless/ath9k/ath9k.h drivers/net/wireless/ath9k/core.h drivers/net/wireless/ath9k/hw.c
2009-03-16ath9k: Fix FIF_PROMISC_IN_BSS processing in station modeJouni Malinen1-5/+6
We must not disable ACK sending in this case since it would break normal station operations. In addition, clarify the comment about AP mode to make more sense. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Add spectrum management to HW capabilitiesSujith1-1/+2
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: make few eeprom and calib items staticLuis R. Rodriguez1-1/+1
This fixes the sparse complaints: drivers/net/wireless/ath9k/eeprom.c:1407:5: warning: symbol 'ath9k_hw_4k_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1436:19: warning: symbol 'eep_4k_ops' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2808:5: warning: symbol 'ath9k_hw_def_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2837:19: warning: symbol 'eep_def_ops' was not declared. Should it be static? CC [M] drivers/net/wireless/ath9k/eeprom.o CHECK drivers/net/wireless/ath9k/mac.c CC [M] drivers/net/wireless/ath9k/mac.o CHECK drivers/net/wireless/ath9k/calib.c drivers/net/wireless/ath9k/calib.c:883:6: warning: symbol 'ar9285_clc' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: downgrade xmit queue full message to xmit debugLuis R. Rodriguez1-1/+1
This is not a fatal message, hitting it simply means we're going to tell the upper layers to slow their horses down but as we make more descriptors available we let the show continue by waking up the queues in ath_wake_mac80211_queue(). We downgrade this as otherwise we fill up your kernel log with messages which can be common under heavy traffic. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16cfg80211: move enum reg_set_by to nl80211.hLuis R. Rodriguez3-16/+20
We do this so we can later inform userspace who set the regulatory domain and provide details of the request. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16cfg80211: remove REGDOM_SET_BY_INITLuis R. Rodriguez2-2/+1
This is not used as we can always just assume the first regulatory domain set will _always_ be a static regulatory domain. REGDOM_SET_BY_CORE will be the first request from cfg80211 for a regdomain and that then populates the first regulatory request. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Fix bug in reading debugfs file 'rcstat'Sujith1-0/+3
The rate table would not have been chosen before the interface has been brought up. Reading 'rcstat' in this case would result in an oops, fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Fix bug in TX aggregationSujith1-16/+33
mac80211 expects the driver to fill in the starting sequence number of an ADDBA request to initiate TX aggregation. IEEE80211_TX_CTL_AMPDU would be set for frames only after a successful ADDBA exchange, but we have to increment the internal sequence counter for the normal(non-AMPDU) data frames proerly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Initialize ANI properlySujith1-10/+3
ANI was not being initialized correctly for all HW variants. This patch fixes it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Use suitable macros with 4k eeprom dataVasanthakumar Thiagarajan1-9/+9
This patch improves range and connection stability in AR9285. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: always compile ath_radio_{en,dis}ableGabor Juhos1-6/+6
ath_radio_{en,dis}able is only compiled if RFKILL is enabled, but it is required by the 'ath9k_wiphy_select' function. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: fix compile error in debug.cGabor Juhos1-0/+2
drivers/net/wireless/ath9k/debug.c: In function 'read_file_wiphy': drivers/net/wireless/ath9k/debug.c:377: error: implicit declaration of function 'put_unaligned_le32' drivers/net/wireless/ath9k/debug.c:378: error: implicit declaration of function 'put_unaligned_le16' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: fix compile error in ahb.cGabor Juhos1-0/+1
drivers/net/wireless/ath9k/ahb.c: In function 'ath_ahb_probe': drivers/net/wireless/ath9k/ahb.c:136: error: 'aphy' undeclared (first use in this function) Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: fix AR_SREV_9100_OR_LATER macroGabor Juhos2-23/+23
The current macro is wrong, because detects some AR5416 devices as an AR9100 device. The AR5416 devices would have performance issues after this change, because the contents of the ar5416 specific and of the ar9100 specificinitval arrays are swapped. Fortunately we can correct this with the rename of the arrays simply. Changes-licesed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: move ar9100 version checking macros into a more appropriate placeGabor Juhos1-7/+6
All other version checking macros are in a common location within the reg.h file. The AR_SREV_9100_OR_LATER macro is wrong currently, but will be fixed with the next patch. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: cleanup AR5416 version checking macrosGabor Juhos4-19/+22
Currently we have two different versions of this macros. Because they would have to do the same thing, we should simplify and merge them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Incorrect AR9285 version check macroSenthil Balasubramanian1-2/+2
Fix AR9285 1.1 and 1.2 version check macro. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: INI update for AR9285 and periodic PA offset caliberationSenthil Balasubramanian5-83/+195
This patch updates the initvalues for AR9285 chipset and also adds periodic PA offset caliberation. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: RX buffers may be accessed/freed even before initialized/alloced.Senthil Balasubramanian1-1/+1
accessing RXBUF list in ath_rx_cleanup may cause panic if ath_descdma_setup fails even before RXBUF list is initialized. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Get rid of unnecessary ATOMIC memory alloc during init timeSenthil Balasubramanian2-7/+6
We can sleep for memory during init time and so allocating rx buffers, descriptro buffers with GFP_KERNEL should help us to get rid of transient alloc fails. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: create a common debugfs_root for all device instancesGabor Juhos3-8/+41
The driver are trying to create an 'ath9k' directory in debugfs for each device currently. If there are more than one device in the system, the second try will always fail. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: AR9280 PCI devices must serialize IO as wellLuis R. Rodriguez1-1/+2
Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: implement IO serializationLuis R. Rodriguez4-2/+55
All 802.11n PCI devices (Cardbus, PCI, mini-PCI) require serialization of IO when on non-uniprocessor systems. PCI express devices not not require this. This should fix our only last standing open ath9k kernel.org bugzilla bug report: http://bugzilla.kernel.org/show_bug.cgi?id=12110 A port is probably required to older kernels and I can work on that. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add a debugfs interface for controlling virtual wiphysJouni Malinen2-0/+165
debugfs ath9k/phy#/wiphy can be used to show the current list of virtual wiphys and to add/remove virtual wiphys. Eventually, this interface could be replaced with a cfg80211/nl80211 command that is passed through mac80211. For example: # cat /debug/ath9k/phy0/wiphy primary: phy0 # echo add > /debug/ath9k/phy0/wiphy # cat /debug/ath9k/phy0/wiphy primary: phy0 secondary: phy1 # echo del=phy1 > /debug/ath9k/phy0/wiphy # cat /debug/ath9k/phy0/wiphy primary: phy0 In addition, following commands can be used to test pausing and unpausing of the virtual wiphys: pause=phy1 unpause=phy1 select=phy1 (select pauses and unpauses wiphys automatically based on channel) schedule=500 (set wiphy scheduling interval in msec; 0 = disable; default value: 500) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add a simple virtual wiphy schedulerJouni Malinen3-0/+72
This is a very simple scheduler that goes through the wiphys and schedules one at a time every N milliseconds (current default value: 500 ms). This is enough for initial testing, but there are number of areas where a more complex scheduler can improve operations greatly. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Special processing for channel changes during scanJouni Malinen3-10/+68
Allow mac80211-controlled channel changes on an active wiphy and especially during a scan. We need this as long as the scan is controlled by mac80211. Moving this control into the driver could allow some optimizations on scanning while using multiple virtual interfaces, but for now, try to work as well as possible with the current scan mechanism. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath9k: Add workaround to recover from failed channel changesJouni Malinen3-2/+43
It looks like channel change may fail in some cases and end up leaving the hardware in state where it cannot transmit any frames. Add a workaround to recover from this state if we detect that wiphy selection is failing due to wiphys not leaving PAUSING state. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-26 16:11:50 +0000