summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/wil6210/wmi.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07wil6210: p2p initial supportDedy Lansky1-3/+77
supporting p2p_find, p2p_listen and p2p_connect Use updated cfg80211_get_bss API (additional argument) Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-07wil6210: switch to generated wmi.hLior David1-18/+18
Switch to auto-generated version of wmi.h which is maintained by FW team. This will allow better sync between teams in the future and avoid bugs because of unexpected API changes. The wmi.h will have many differences but most are cosmetic. It also includes these real differences: 1. is_go parameter added to BCON_CTRL and START_PCP commands. 2. max_rx_pl_per_desc added to CFG_RX_CHAIN command. 3. various small API updates that are not currently used by driver. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-07wil6210: AP: prevent connecting to already connected stationMaya Erez1-0/+8
wmi_evt_connect doesn't check if the connect event is received for an already connected station. This can lead to memory leak as a new vring is allocated without freeing the previously allocated vring and to unexpected behavior of nl80211 layer due to unexpected notification of a new station. Add a check in wmi_evt_connect in AP mode to verify that the requested CID is not associated to an already connected station. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-02wil6210: protect synchronous wmi commands handlingMaya Erez1-4/+13
In case there are multiple WMI commands with the same reply_id, the following scenario can occur: - Driver sends the first command to the device - The reply didn’t get on time and there is timeout - Reply_id, reply_buf and reply_size are set to 0 - Driver sends second wmi command with the same reply_id as the first - Driver sets wil->reply_id - Reply for the first wmi command arrives and handled by wmi_recv_cmd - As its ID fits the reply_id but the reply_buf is not set yet it is handled as a reply with event handler, and WARN_ON is printed This patch guarantee atomic setting of all the reply variables and prevents the above scenario. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26wil6210: handle multiple connect/disconnect eventsMaya Erez1-44/+113
In the current solution wil6210 configures the vring in a worker and holds only one pending CID. This implementation may lead to race conditions between connect and disconnect events of multiple stations or fast connect/disconnect events of the same station. In order to allow the removal of the connect worker and handling of WMI_VRING_CFG_DONE_EVENTID in the connect event, the WMI replies that provide the reply in a given buffer needs to be handled immediately in the WMI event interrupt thread. To prevent deadlocks, WMI replies that requires additional handling are still handled via the events list. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-08wil6210: prevent external wmi commands during suspend flowMaya Erez1-0/+4
In __wmi_send we check if fw is ready at the beginning of the function. While we wait for the completion of the previous command, system suspend can be invoked and reset the HW, causing __wmi_send to read from HW registers while it is not ready. Taking the wmi_mutex in the reset flow when setting the FW ready bit to zero will prevent the above race condition. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: fix device ready detectionVladimir Kondratiev1-8/+2
Adjust driver behavior during FW boot. Proper sequence of events after reset and FW download, is as following: - FW prepares mailbox structure and reports IRQ "FW_READY" - driver caches mailbox registers, marks mailbox readiness - FW sends WMI_FW_READY event, ignore it - FW sends WMI_READY event with some data - driver stores relevant data marks FW is operational Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: ignore selected WMI eventsVladimir Kondratiev1-0/+10
Some events are ignored for purpose; such events should not be treated as "unhandled events". Replace info message saying "unhandled" with debug one saying "ignore", to reduce dmesg pollution Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-09wil6210: capture all frames in sniffer modeVladimir Kondratiev1-1/+1
For the sniffer (monitor) mode, capture either control only or both control and data PHY. It used to be control only or data only PHY due to firmware issues with configuration for PHY auto-detection; but now it is resolved. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-17wil6210: match wait_for_completion_timeout return typeNicholas Mc Guire1-1/+1
Return type of wait_for_completion_timeout is unsigned long not int. As remain is exclusively used for wait_for_completion_timeout here its type is simply changed to unsigned long. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/wil6210/wmi.c:827 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, CONFIG_WIL6210=m Patch is against 4.1-rc3 (localversion-next is -next-20150514) Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: use inline functions for register accessVladimir Kondratiev1-13/+13
Replace macros like "R", "W", "S", "C", defined multiple times, with inline functions "wil_[rwsc]". Use "readl" and "writel" instead of "ioread32" and "iowrite32" since it is granted that memory transactions are used, not port ones like IN/OUT Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: unify wmi_set_ie() error handlingVladimir Kondratiev1-2/+17
When printing error message, provide string describing IE kind. Derive it from IE type This allows removing of error messages printing in callers Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: treat "unhandled event" as warning instead of errorDedy Lansky1-1/+1
FW is allowed to generate WMI events that are not handled by this driver. Treat such case as warning instead of error. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: improve mgmt frame handlingVladimir Kondratiev1-10/+44
Check event length; hex dump both Rx and Tx frames Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: wait for del_station to completeVladimir Kondratiev1-1/+28
Multiple del_station requests may be sent to the driver by the supplicant when turning down AP. This may overflow mailbox between the FW and ucode Wait till disconnect of one STA completed before sending next command. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09wil6210: Support hidden SSIDHamad Kadmany1-1/+3
Pass hidden SSID information to FW for proper operation. In order to be able to scan/connect to the hidden SSID, SSID setting is added when scan is requested from FW. SSID scanning currently supports single SSID due to FW limitation. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09wil6210: add NIC memory region mac_rgf_extVladimir Kondratiev1-0/+1
Firmware defines new memory region, mac_rgf_ext that need to be accessed from the host for debug purposes. Add corresponded mapping Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: broadcast for secure linkVladimir Kondratiev1-50/+18
Introduce 2 types of GTK, Tx (for this STA) and Rx (for each peer). Now, AP has only Tx GTK, STA - only Rx one. PBSS not supported yet; for it, continue using pseudo-DMS. Handle per-vring .1x state, update it from WMI_VRING_EN_EVENTID event. This allows unification for unicast and broadcast vrings. This mechanism replaces former per-CID "data_port_open" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: increase timeout for the "echo" commandVladimir Kondratiev1-1/+1
Sometimes it takes for the firmware more than 20ms to react on "echo" command after reset. Increase timeout from 20 to 50ms Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-20wil6210: Prefer ether_addr_copy() over memcpy()Vladimir Kondratiev1-5/+6
Fix checkpatch warning: WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Align Rx frames on 4*n+2 by having SNAPVladimir Kondratiev1-0/+5
For the networking code and for hardware network accelerators, it is better to have IP header 4*n aligned. On the other side, DMA on Rx path require buffer to be aligned on 4*n as well. Having 14 bytes of Ethernet header, these 2 alignment requests are in contradiction. To solve this, order hardware offload block to not remove SNAP header. This adds extra 6 bytes between addresses and ethertype, making it 20 bytes total. This way, both buffer and IP header are 4*n aligned. Remaining is only to remove SNAP by shifting addresses 6 bytes. This involves data copying, so this feature should be disabled unless required by the platform. Module parameter "rx_align_2" (bool, default - false) introduced to control this feature. Feature is completely disabled when parameter is false. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: rename 'secure_pcp' to 'privacy'Vladimir Kondratiev1-1/+1
Make this field to track privacy attribute for all interface types Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: boot loaderVladimir Kondratiev1-6/+1
Introduce boot loader. Instead of the operational firmware, very small boot loader is burned to the on-board flash. Boot loader initializes hardware upon reset, and prepares for low power mode. Boot loader reports MAC address and detects radio chip connected. Driver loads firmware only when bringing up interface. All information required to set up network interface, most important is MAC address, reported by the boot loader The firmware composed of 2 files: - wil6210.fw - firmware itself (compiled code + data) - wil6210.board - board file (various board and radio dependent calibrations and parameters) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: fix timing of netif_carrier_on indicationDedy Lansky1-2/+0
netif_carrier_on indication was too late. In case Rx packet received before netif_carrier_on indication, upper layers could not send Tx packet back. The fix is to indicate netif_carrier_on earlier: for STA, indicate netif_carrier_on when association starts. for AP/PCP, indicate netif_carrier_on upon starting AP/PCP. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: sync WMI with firmwareVladimir Kondratiev1-7/+8
Incorporate changes from firmware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo1-1/+0
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-15wil6210: relax spinlocks in rx reorderVladimir Kondratiev1-3/+4
In the Rx reorder mechanism, nothing is done in the interrupt context, so there is no need to use 'irq' flavors of spinlock. Rx done in NAPI context (tasklet), other manipulations - in the thread context. Having interrupts enabled makes it better for the OS in general. Besides, if enslaved under bonding, bridge or team driver, Rx won't work with interrupts disabled. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: RX high threshold interrupt configurationVladimir Kondratiev1-0/+1
Rx high threshold interrupt is reported by the hardware in case when number of not utilized by the HW descriptors in the Rx ring becomes low. Introduce module parameter for RX high threshold. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: use bitmap API for "status"Vladimir Kondratiev1-6/+6
wil->status used as bitmap; use DECLARE_BITMAP for it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: Increase number of associated stationsVladimir Kondratiev1-1/+1
Change default to support maximum number of associated stations to an AP Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix max. MPDU sizeVladimir Kondratiev1-1/+1
When configuring Tx/Rx VRING's, driver need to specify max. MPDU size It should take into account all overhead introduced by 802.3->208.11 transformation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: delba for responderVladimir Kondratiev1-1/+14
Implement delba flow for the responder (Rx) side Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: control AMSDU on Tx side of Block AckVladimir Kondratiev1-2/+6
When establishing Block Ack as originator (Tx), control AMSDU flag when sending ADDBA and update status upon establishment flow completion. To be used in AMSDU flows Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: allow to configure ADDBA requestVladimir Kondratiev1-3/+9
For manual ADDBA configuration, allow to set desired window size or disable automatic mechanism. Introduce module parameter (int) agg_wsize. It can be changed on run time, will be taken into account on the next connect. Interpretation: - <0 - disable automatic ADDBA; intended for manual testing through debugfs - 0 - use automatically calculated window size - >0 - use this for window size. Clipped by maximum supported by the hardware with current environment. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: simple ADDBA on originator (Tx) sideVladimir Kondratiev1-0/+19
Upon Tx vring creation, initiate BACK establishment with maximum possible window size. When establishing secure connection, there is EAPOL data exchange between connection itself and "data port open", where security is done and non-EAPOL data may be transferred. It is better to send EAPOL frames using normal ACK because of firmware considerations. send ADDBA only is 2 conditions met: - data port open for the corresponded STA - vring created Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: ADDBA/DELBA flowsVladimir Kondratiev1-31/+128
Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg1-1/+0
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-01wil6210: propagate disconnect reasonVladimir Kondratiev1-4/+4
Propagate reason for the disconnect through the relevant call chains: - report to cfg80211 reason as reported by the firmware - provide to the firmware reason as requested by cfg80211 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: Add support for large packetsVladimir Kondratiev1-1/+1
It is possible to configure driver using mtu_max module parameter by setting it to value in range of 68..7920 inclusive. This is sub-optimal performance-wise in case packet is larger than 1 page. mtu_max default value is 2228. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: prevent double disconnect command issuingVladimir Kondratiev1-1/+1
Disconnect flow may be invoked either from upper layer request, or from event reported by the firmware. In case of firmware event, driver need to release resources for the station but not send another disconnect WMI command. In case of upper layer request, WMI_DISCONNECT_STA_CMDID command need to be issued for the firmware to perform disconnect on the MAC layer. Eventually, event is expected to confirm MAC disconnect, but it is better to not wait for firmware event and release station resources immediately. FW may fail to report disconnect for various reasons, so one could not rely on event always reported. Introduce parameter to distinguish 2 cases above to prevent double WMI command issuing. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-02wil6210: manual FW error recovery modeVladimir Kondratiev1-0/+1
Introduce manual FW recovery mode. It is activated if module parameter @no_fw_recovery set to true. May be changed at runtime. Recovery information provided by new "recovery" debugfs file. It prints: mode = [auto|manual] state = [idle|pending|running] In manual mode, after FW error, recovery won't start automatically. Instead, after notification to user space, recovery waits in "pending" state, as indicated by the "recovery" debugfs file. User space tools may perform data collection and allow to continue recovery by writing "run" to the "recovery" debugfs file. Alternatively, recovery pending may be canceled by stopping network interface i.e. 'ifconfig wlan0 down' Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: introduce separate completion for WMIDedy Lansky1-4/+4
re-use of wmi_ready for both FW ready event and for wmi_call was causing false "FW not ready" indication in case wmi_call() was invoked while reset took place. add wmi_call completion variable instead of re-using wmi_ready. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: send connect request IEs to FW also for non-secure connectionVladimir Kondratiev1-0/+2
Driver is sending connect request IEs to FW only for secure connection and ignores them for non-secure connection. This is fixed by always sending the IEs to FW upon connect request Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix race condition between BACK event and Rx dataDedy Lansky1-1/+9
While handling Rx packet, BACK event arrives and frees tid_ampdu_rx array. This causes kernel panic while accessing already freed spinlock The fix is to remove tid_ampdu_rx[]'s spinlock and instead use single sta's spinlock to guard the whole tid_ampdu_rx array. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: modify confusing printoutDedy Lansky1-1/+1
When WMI event received when driver not ready to accept it, the printed error message is misleading and hints that HW is stuck. Modify the error message to make it clearer Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix race condition of disconnect while BACK eventDedy Lansky1-2/+7
This race condition was causing double free of tid_ampdu_rx structures Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: coding style fixesVladimir Kondratiev1-0/+4
- parentheses, indentation, typos - seq_puts() instead of seq_printf() with single argument - sizeof(var) vs. sizeof(type) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: some more debug for the WMI mechanismVladimir Kondratiev1-0/+5
Log worker thread start/stop; as well as every handler invocation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-04Merge tag 'mac80211-next-for-john-2014-08-29' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "Not that much content this time. Some RCU cleanups, crypto performance improvements, and various patches all over, rather than listing them one might as well look into the git log instead." Signed-off-by: John W. Linville <linville@tuxdriver.com> Conflicts: drivers/net/wireless/ath/wil6210/wmi.c
2014-08-26cfg80211: allow passing frame type to cfg80211_inform_bss()Johannes Berg1-1/+1
When using the cfg80211_inform_bss[_width]() functions drivers cannot currently indicate whether the data was received in a beacon or probe response. Fix that by passing a new enum that indicates such (or unknown). For good measure, use it in ath6kl. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl] Acked-by: Arend van Spriel <arend@broadcom.com> [brcmfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-13 17:22:57 +0000