summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)AuthorFilesLines
2015-02-13wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo1-17/+6
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-09Merge tag 'wireless-drivers-next-for-davem-2015-02-07' of ↵David S. Miller19-466/+560
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Major changes: iwlwifi: * more work for new devices (4165 / 8260) * cleanups / improvemnts in rate control * fixes for TDLS * major statistics work from Johannes - more to come * improvements for the fw error dump infrastructure * usual amount of small fixes here and there (scan, D0i3 etc...) * add support for beamforming * enable stuck queue detection for iwlmvm * a few fixes for EBS scan * fixes for various failure paths * improvements for TDLS Offchannel wil6210: * performance tuning * some AP features brcm80211: * rework some code in SDIO part of the brcmfmac driver related to suspend/resume that were found doing stress testing * in PCIe part scheduling of worker thread needed to be relaxed * minor fixes and exposing firmware revision information to user-space, ie. ethtool. mwifiex: * enhancements for change virtual interface handling * remove coupling between netdev and FW supported interface combination, now conversion from any type of supported interface types to any other type is possible * DFS support in AP mode ath9k: * fix calibration issues on some boards * Wake-on-WLAN improvements ath10k: * add support for qca6174 hardware * enable RX batching to reduce CPU load Conflicts: drivers/net/wireless/rtlwifi/pci.c Conflict resolution is to get rid of the 'end' label and keep the rest. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06ath9k: Delete an unnecessary check before the function call "relay_close"Markus Elfring1-1/+1
The relay_close() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-06ath9k: Choose correct rate for 2GHz channelSujith Manoharan1-1/+5
Set the transmit rate for the keep-alive frames as 1M/CCK when the current channel is in the 2GHz band. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-06ath9k: Clear TSF2 properlySujith Manoharan2-0/+11
Chips in the AR9003 family have a second TSF, which needs to be cleared when putting the card to sleep. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-06ath9k: Program AR_WA correctlySujith Manoharan1-17/+22
Setting the required configuration in the PCIE WorkAround register needs to be done after all the WoW parameters have been set. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-06ath9k: Fix issues with WoW enableSujith Manoharan3-95/+93
This patch addresses several issues with the ath9k_hw_wow_enable() routine: * The usage of set/clr variables is removed. Writing the required values to registers is cleaner. * The shift value of 28 for the contention window field in AR_WOW_PATTERN is incorrect, change it to 27. * Disabling Keep Alive needs to be done based on the LINK_CHANGE option. This is done unconditionally now, fix this. * The workaround for the D1/D3 issue is required only for AR9462. * The bitfield for enabling pattern matching for packets less than 256 bytes has expanded for new chips, handle this accordingly. * General cleanup. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-06ath9k: Register correct WOW details with mac80211Sujith Manoharan1-2/+14
Since the number of user patterns is higher for newer chips, make sure that this is registered during initialization. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-06ath9k: Add support for more WOW patternsSujith Manoharan3-27/+56
Newer chips like WB222, WB335 support more than 8 user-configurable patterns. This patch adds support for it by setting up the correct HW registers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Fix max pattern checkSujith Manoharan3-31/+51
Since the maximum number of configurable patterns is chip-specific, use the HW capability instead of a fixed value for checking if a free pattern slot is available. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Cleanup reg_wow.hSujith Manoharan1-53/+15
* Remove unnecessary comments. * Remove unused macros. * Indent the macros. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Remove incorrect register macrosSujith Manoharan1-5/+0
These macros are applicable to pre-AR9003 chips and the addresses are different for the AR9003 family. Since they are unused anyway, remove them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Move WOW registers to reg_wow.hSujith Manoharan3-120/+137
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Register max WOW patternsSujith Manoharan2-1/+10
Since the number of patterns that can be configured in the HW is higher for newer chips, store the chip-specific value in ath9k_hw_wow. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Add a HW structure for WOWSujith Manoharan2-6/+10
This can be used to hold the WOW state in ath9k_hw. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Simplify user pattern configurationSujith Manoharan2-43/+12
There is no need to allocate a new structure and free it for every user pattern, instead use local variables. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Add a debugfs file for WOWSujith Manoharan3-2/+71
This can be used to force WOW for cards that are not present in the supported PCI ID list. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Remove ath9k_hw_wow_event_to_stringSujith Manoharan3-27/+3
Printing the value of the wakeup status is sufficient. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Remove unused BMISS processingSujith Manoharan3-29/+0
The various variables tracking bmiss interrupts are not really used anywhere except in a debug message. Remove them since they have no functional purpose. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Check WOW triggers properlySujith Manoharan2-30/+28
This patch makes sure that valid WOW triggers are present before trying to suspend the device. Also, introduce and use ATH_OP_WOW_ENABLED to bypass PCI suspend and clear it in resume(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Fix wow init/deinitSujith Manoharan3-4/+23
Registering the card as a wakeup source needs to be done once, during initialization. When the WOW configuration changes, the card's status as wakeup source needs to be changed too and this is done via the set_wakeup() callback. Also, make sure the device is removed properly using ath9k_deinit_wow(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Check multi-channel context for WOWSujith Manoharan1-0/+9
If CONFIG_ATH9K_CHANNEL_CONTEXT is enabled, check whether multiple contexts are active and if so, return 1 without enabling WOW since we don't support it in this case. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Check early for multi-vif/STA conditionsSujith Manoharan1-15/+7
If multiple interfaces are active or there is no associated station interface, bail out early and return 1 so that mac80211 can proceed with the normal suspend routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Remove redundant device_can_wakeup() checkSujith Manoharan1-6/+0
WOW capability is registered with mac80211 only when the device has the ability to wakeup, so there is no need to check in the suspend() routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Return early for error conditionsSujith Manoharan1-6/+6
Do not try to cancel work instances and ANI when the device is not present or WOW triggers are not configured. Bail out early and use ath_err() for such error conditions. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03ath9k: Remove ATH9K_HW_WOW_DEVICE_CAPABLESujith Manoharan3-8/+1
Enabling WOW based on the chip is incorrect since it needs to be done for specific sub-devices which have proper platform support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29ath9k: Enable manual peak detect calibrationSujith Manoharan1-2/+8
On some AR955x/QCA953x boards, noise floor calibration gets stuck and the cause is a hardware/BB issue. To fix this, peak detect calibration in the HW is disabled and is done in the driver instead. There a few differences with the calibration routine for older chips like AR9331. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29ath9k: Set correct peak detect thresholdSujith Manoharan1-4/+11
The value is different for PCOEM cards and AR955x/AR953x. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29ath9k: Fix manual peak calibration initializationSujith Manoharan1-8/+30
The LNA gain setting override needs to be done only for AR9330 and PCOEM chips. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29ath9k: Add a macro to identify PCOEM chipsSujith Manoharan1-0/+3
This can be used if we need to apply register settings for all PCOEM solutions (in the AR9003 family). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29ath9k: Update AR955x initvalsSujith Manoharan1-2/+2
This patch disables HW peak detect calibration for AR955x, since it is problematic on a few boards. Instead, manual calibration will be done in the driver. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29ath9k: Update QCA953x initvalsSujith Manoharan1-2/+2
This patch disables HW peak detect calibration for QCA953x, since it is problematic on a few boards. Instead, manual calibration will be done in the driver. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+3
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27ath9k and ath9k_htc: rename variable "led_blink"Hong Xu6-8/+8
ath9k and ath9k_htc use the variable name "led_blink" to indicate whether the module parameter "blink" is on. This name is easy to conflict with other variables, and has caused a compiler error found by kbuild test bot. The compiler error is as following: drivers/net/wireless/ath/ath9k/ath9k_htc.o:(.data+0x47c): multiple definition of `led_blink' drivers/net/wireless/ath/ath9k/ath9k.o:(.bss+0x20): first defined here Fixes: 3a939a671225 ("ath9k_htc: Add a module parameter to disable blink") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cbJohn Linville1-5/+1
This clause is conditioned on htc_hdr != NULL, but it will only be NULL when that check is reached. Coverity: CID 114318 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: Add a module parameter to disable blinkHong Xu3-0/+11
Add an option "blink" to enable or disable the LED blink. The default value is set to 1 so that existing users would not experience any unexpected changes. Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k: Fix no-ack frame statusSujith Manoharan1-3/+6
Check if the frame has been completed without any error and use IEEE80211_TX_STAT_NOACK_TRANSMITTED to indicate successful transmission of no-ack frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo2-10/+12
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-19ath9k: fix race condition in irq processing during hardware resetFelix Fietkau1-4/+3
To fix invalid hardware accesses, the commit 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset") made the irq handler ignore interrupts emitted after queueing a hardware reset (which disables the IRQ). This left a small time window for the IRQ to get re-enabled by the tasklet, which caused IRQ storms. Instead of returning IRQ_NONE when ATH_OP_HW_RESET is set, disable the IRQ entirely for the duration of the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: Update PCI IDs for AR9565Sujith Manoharan1-0/+85
This patch adds several new PCI IDs for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: enable per-packet TPC on AR9002 based chipsLorenzo Bianconi2-7/+1
Enable per-packet TPC on AR9002 based chips by default Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: add TPC to TX path for AR9002 based chipsLorenzo Bianconi1-12/+56
Add TPC capability to TX descriptor path for AR9002 based chips. Scale per-packet TX power according to eeprom power bias, power adjustments for HT40 mode and open loop CCK rates. Cap per-packet TX power according to TX power per-rate tables Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: add power per-rate tables for AR9002 chipsLorenzo Bianconi5-0/+125
Add TX power per-rate tables for MIMO/legacy modes for AR9002 based chips in order to cap the maximum TX power value per-rate in the TX descriptor path. Add TX power adjustments for HT40 mode, open loop CCK rates and eeprom power bias for AR9280 and later chips Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entriesArend van Spriel1-100/+29
Use the helper to get rid of the file operations per debugfs file. The device driver data contains struct ieee80211_hw pointer and the struct ath9k_softc pointer is assigned to ieee80211_hw::priv so it can be accessed in the seq_file read operation. Cc: ath9k-devel@lists.ath9k.org Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: Add QCA956x HW supportMiaoqing Pan6-32/+76
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: Fix register definitions for QCA956xMiaoqing Pan1-8/+11
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: Add initvals for QCA956xMiaoqing Pan2-1/+1106
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: Add HW IDs for QCA956xMiaoqing Pan4-0/+13
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg1-8/+8
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-24ath9k: fix typoLorenzo Bianconi1-1/+1
Fix typo Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>