summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/init.c
AgeCommit message (Collapse)AuthorFilesLines
2014-02-04ath9k: Do not support PowerSave by defaultSujith Manoharan1-1/+7
Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13Merge branch 'for-john' of ↵John W. Linville1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-01-07mac80211: remove channel_change_timeJohannes Berg1-1/+0
This value is no longer used by mac80211, and practically no driver ever set it to a correct value anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-03ath9k: Remove RX PollSujith Manoharan1-2/+0
This patch removes the convoluted and hacky method of monitoring for connectivity. We rely on mac80211's connection loss logic and doing it in the driver is not necessary. The HW check for MAC/BB hangs is also simplified, there is no need to have a separate work instance for it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: Use a subroutine for the AR9330 reset WARSujith Manoharan1-1/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: Remove unneeded ref. count initializationSujith Manoharan1-1/+0
The interrupt reference counter is always initialized in ath9k_start(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: Cleanup ath9k.hSujith Manoharan1-1/+1
* Remove unused macros. * Move definitions to appropriate sections. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09ath9k: Use a separate TX gain table for WZR-HP-G450HSujith Manoharan1-9/+27
The Buffalo device WZR-HP-G450H uses the index 3 for TX gain, which is set to the high_power table currently. Later variants of the router use the same index, but instead refer to the low_ob_db gain table. This is not handled in the driver since there is no way to distinguish board revisions and the high_power table is used (incorrectly) for the newer variants. By default, devices based on AR9300 using the TX gain index 3 have to use the high_power table. To make sure that WZR-HP-G450H is not broken when the high_power table is updated, use a separate array based on information obtained from the platform data. The current situation where only the original variant of WZR-HP-G450H works properly stays unchanged. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09ath9k: enable dfs for mesh modeChun-Yeow Yeoh1-0/+3
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: optimize ath9k_flushFelix Fietkau1-0/+1
Instead of checking the queues in a loop with hardcoded sleep times inbetween, use a wait queue to trigger queue checks after the tx processing tasklet has run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: use a timer to put hardware into full sleepFelix Fietkau1-0/+2
When operating in client mode, the short period of time between scanning and associating is often enough to put the hardware through several FULL-SLEEP <-> AWAKE transitions, each wakeup requiring a reset to fully recover the hardware. This is completely unnecessary and can easily be avoided by deferring the switch to full sleep. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add an initialization routine for WoWSujith Manoharan1-19/+1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Use CONFIG_ATH9K_WOWSujith Manoharan1-2/+2
Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Identify Killer Wireless cardsSujith Manoharan1-0/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: Use correct PCIE initvals for AR9485Sujith Manoharan1-0/+5
Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: DFS radar use correct width enumJanusz Dziedzic1-2/+2
Use correct width enums when setup radar_detect_widths for DFS. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-07ath9k: enable DFS for IBSS modeSimon Wunderlich1-1/+2
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: add TX99 supportLuis R. Rodriguez1-12/+14
TX99 support enables Specific Absorption Rate (SAR) testing. SAR is the unit of measurement for the amount of radio frequency(RF) absorbed by the body when using a wireless device. The RF exposure limits used are expressed in the terms of SAR, which is a measure of the electric and magnetic field strength and power density for transmitters operating at frequencies from 300 kHz to 100 GHz. Regulatory bodies around the world require that wireless device be evaluated to meet the RF exposure limits set forth in the governmental SAR regulations. In the examples below, for more bit rate options see the iw TX bitrate setting documentation: http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates Example usage: iw phy phy0 interface add moni0 type monitor ip link set dev moni0 up iw dev moni0 set channel 36 HT40+ iw set bitrates mcs-5 4 echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: dfs kill ath9k specyfic codeJanusz Dziedzic1-2/+2
Kill of using ath9k_hw_common() function in dfs detector code. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: remove sc->config.cabqReadyTimeFelix Fietkau1-1/+0
It is not exposed as a configuration option anyway Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_cmn_update_ichannel staticFelix Fietkau1-1/+1
Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: use a separate data structure for rx buffersFelix Fietkau1-25/+59
There's no shared code for handling both rx and tx buffers, and tx buffers require a lot more metadata than rx buffers. Using a separate data structure for rx reduces memory usage and improves cache footprint. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Identify WB335 Antenna configurationSujith Manoharan1-0/+17
There are 2 types of WB335 cards, 1-antenna and 2-antenna. Identify them based on PCI subsystem IDs, this will be used for MCI/BTCOEX tweaks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Identify CUS252 cardsSujith Manoharan1-0/+3
These cards are based on WB335/AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28Merge branch 'master' of ↵John W. Linville1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-26ath9k: Fix ASPM workaround usageSujith Manoharan1-0/+5
The PCIE Workaround register (AR_WA/0x4004) is used to handle various hardware quirks. For AR9002 chips, AR_WA_D3_L1_DISABLE is used to prevent the HW from automatically entering L1 state when D3 is enforced. AR_WA_D3_L1_DISABLE has to be enabled for a few AR9280 based cards, mark them based on their PCI subdevice/subvendor IDs and enforce it in ar9002_hw_configpcipowersave(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k: Add antenna diversity tweak for CUS198Sujith Manoharan1-0/+1
This improves RX diversity and performance for AR9485. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau1-1/+2
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16ath9k: enable CSA functionality in ath9kSimon Wunderlich1-0/+1
CSA is only enabled for one interface, but the same limitation applies for mac80211 too. It checks whether the beacon has been sent (different approaches for non-EDMA-enabled and EDMA-enabled devices), and completes the channel switch after that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: announce that ath9k supports 5/10 MHzSimon Wunderlich1-0/+1
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: set 5/10 MHz supported channels and fix bitrateSimon Wunderlich1-8/+16
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: use chandef instead of channel_typeSimon Wunderlich1-1/+3
To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: Fix BTCOEX usage for RX diversitySujith Manoharan1-2/+2
BTCOEX has to be *disabled* for WLAN RX diversity to work on combo cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Set SWCOM value for CUS198Sujith Manoharan1-0/+1
CUS198/CUS230 cards require a custom value to be programmed into the SWCOM register. Assign this during init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Add a HW capability for WLAN/BT RX diversitySujith Manoharan1-4/+17
Make use of this capability to restrict the usage of the debugfs file and modparam using which this feature can be enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Cleanup WLAN/BT RX diversitySujith Manoharan1-6/+6
For single-chain WLAN+BT cards, the BT antenna can be used for WLAN RX when the BT interface is disabled. Rename the modparam "antenna_diversity" to "bt_ant_diversity" to clarify this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Fix antenna diversity for CUS198Sujith Manoharan1-0/+2
CUS198/CUS230 need a few tweaks in the antenna diversity algorithm to accomodate RSSI variation. Add a couple of knobs to control low RSSI threshold and fast antenna diversity bias values. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Enable WoW only for supported modelsSujith Manoharan1-0/+1
Since platform support is required for WoW, identify and and enable Wow only for supported cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add PCI IDs for CUS217Sujith Manoharan1-0/+2
CUS217 is a card based on AR9462. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Modify IDs to identify CUS230Sujith Manoharan1-2/+5
CUS198 and CUS230 are similar cards, both are AR9485 + xLNA solutions. But, the subsystem IDs differ - identify CUS230 explicitly to make things clearer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-14ath9k: Add custom parameters for CUS198Sujith Manoharan1-0/+21
CUS198 is a card based on AR9485. There are differences between the base reference design HB125 and CUS198. Identify such cards based on the PCI subsystem IDs and set HW parameters appropriately. Addresses this bug - https://bugzilla.kernel.org/show_bug.cgi?id=49201 Cc: jkp@iki.fi Cc: gfmichaud@gmail.com Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12Merge branch 'for-john' of ↵John W. Linville1-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-06-12ath9k: add support for IEEE80211_TX_CTL_PS_RESPONSEFelix Fietkau1-0/+2
Use the UAPSD hardware queue to get PS-Poll responses out as fast as possible and without backoff. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12Merge branch 'master' of ↵John W. Linville1-12/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/Kconfig net/mac80211/iface.c
2013-06-12ath9k: Use minstrel rate control by defaultSujith Manoharan1-4/+0
The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath9k: Disable PowerSave by defaultSujith Manoharan1-2/+1
Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-04Merge remote-tracking branch 'wireless-next/master' into HEADJohannes Berg1-7/+10
Merge to get the wil6210 changes that a cfg80211 change needs. A conflict in drivers/net/wireless/ath/ath9k/init.c was just whitespace changes. Also fix a semantic conflict due to cw1200 using WoWLAN which I had modified in my tree. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03ath9k: Enable WoW only for AR9462Sujith Manoharan1-4/+0
The only card with which WoW has been tested and verified is AR9462. Do not enable it for all cards since WoW is really quirky and needs to be tested properly with each chip. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03ath9k: advertise support for active monitor interfacesFelix Fietkau1-0/+2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03cfg80211: take WoWLAN support information out of wiphy structJohannes Berg1-9/+11
There's no need to take up the space for devices that don't support WoWLAN, and most drivers can even make the support data static const (except where it's modified at runtime.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-17 11:45:52 +0000