summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2013-12-18ath9k_htc: reconfigure led_gpios after resumeOleksij Rempel1-5/+12
On suspend/resume, firmware will restart and gpios configuration will be reseted. Restore this configureation at least for LEDs Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k/ath9k_htc: Remove WME macrosSujith Manoharan1-1/+1
Use the macros provided by mac80211 and remove redundant declarations inside the drivers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28ath9k: Fix BTCOEX weight initializationSujith Manoharan1-1/+1
The WLAN/BT weights have to set correctly before BTCOEX is initialized. Currently, this is not done for all chips in the AR9003 family. This patch fixes this issue by setting the weights in the init path. While at it, rename ar9462_wlan_weights to mci_wlan_weights since it is common to both AR9462 and AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Cancel BTCOEX related work before disabling BTCOEXMohammed Shafi Shajakhan1-1/+1
Before disabling BTCOEX in the h/w cancel all BTCOEX related works. This is similar to the commit in ath9k(c32cdbd8) ath9k: Stop the BTCOEX timers before disabling BTCOEX Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Add a modparam to enable BTCOEX rather than defaultMohammed Shafi Shajakhan1-0/+9
Enable BTCOEX for WB193(which seems to be the only supported ath9k_htc BTCOEX chipset)only when it is enabled via modparam, rather than enabling it by default. Cc: Vivek Natarajan <nataraja@qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k_htc: Fix IDLE power saveSujith Manoharan1-92/+0
Remove the radio enable/disable stuff and fix the transition to FULL_SLEEP mode when the device is idle. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k_htc: Use atomic operations for op_flagsSujith Manoharan1-15/+15
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove ATH_BTCOEX_CFG_NONE checksSujith Manoharan1-11/+0
Since BTCOEX code can be compiled out cleanly now, remove these checks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan1-3/+7
ath9k_htc can also make use of CONFIG_ATH9K_BTCOEX_SUPPORT to be compiled without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Init BTCOEX inside htc_drv_gpio.cSujith Manoharan1-0/+32
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Start/stop btcoex using a helperSujith Manoharan1-0/+24
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath9k_hw: make bluetooth coexistence support optional at compile timeFelix Fietkau1-0/+9
Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOOJoe Perches1-5/+4
Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17ath9k: Remove enabling btcoex from stomp type changeRajkumar Manoharan1-0/+2
This patch removes btcoex_enable from stomp type change and let it be called from callee functions that makes the code can be reusable for MCI changes. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k/ath9k_htc: Fix PS wrappers for RF killMohammed Shafi Shajakhan1-2/+8
ath9k_hw_gpio_get reads the GPIO in/out registers to get the status of GPIO pins, so use PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan1-1/+1
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath9k_htc: Revamp LED managementSujith Manoharan1-157/+31
Remove all the convoluted hacks in the driver and simplify things by making use of mac80211's LED triggers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_hw: Move bt_stomp to hw from common.Vivek Natarajan1-3/+3
Move bt_stomp to ath9k_hw and add its support for latest chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Fix AMPDU subframe handlingSujith Manoharan1-4/+2
* Register the driver's maximum ampdu subframe limit to mac80211. * Cleanup the target capabilities structure and fix an endian issue. * Fix BTCOEX by sending a command to the target when the BT priority changes. * Bump the required firmware version to 1.1 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix warnings from -Wunused-but-set-variableSujith Manoharan1-0/+4
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Drain pending TX frames properlySujith Manoharan1-2/+1
When doing a channel set or a reset operation the pending frames queued up for transmission have to be flushed and sent to mac80211. Fixing this has to be done in two separate steps: * Flush queued frames and kill the URB TX completion handler. * Complete all the frames that in the TX pending queue. This patch adds proper support for draining and all the callsites namely, channel change/reset/idle/stop are fixed. A separate queue is used for handling failed frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix TX queue managementSujith Manoharan1-1/+1
Handle queue start/stop properly by maintaining a counter to check if the pending frame count has exceeded the threshold. Otherwise, packets would be dropped needlessly. While at it, use a simple flag to track queue status and use helper functions too. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move TX specific stuff to a separate structureSujith Manoharan1-4/+4
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Queue WMI eventsSujith Manoharan1-0/+3
Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03ath9k_htc: make use common of function to update txpowerRajkumar Manoharan1-1/+2
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Move LED/RFKILL code to htc_drv_gpio.cSujith Manoharan1-0/+327
And add the copyright/license header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07ath: Convert ath_print to ath_dbgJoe Perches1-8/+7
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan1-0/+134
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 16:38:09 +0000