summaryrefslogtreecommitdiffstats
path: root/drivers/net/vmxnet3
AgeCommit message (Collapse)AuthorFilesLines
2011-03-27net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka1-2/+2
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Dont allocate extra MSI-x vectorsShreyas Bhatewara2-5/+5
In case of single tx and rx queues, three MSI-x vectors are allocated instead of two. This patch fixes that. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Add locking for access to command registerShreyas Bhatewara3-0/+54
Access to cmd register is racey, especially in smp environments. Protect it using a spinlock. Signed-off-by: Matthieu Bucchianeri <matthieu@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Disable napi in suspend, reenable in resume.Shreyas Bhatewara1-1/+6
There is a small possibility of a race where the suspend routine gets called, while a napi callback is still pending and when that comes up, it enables interrupts which just got disabled in the suspend routine. This change adds napi disable call in suspend and enable in resume to avoid race. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Make ethtool handlers multiqueue awareShreyas Bhatewara1-114/+145
Show per-queue stats in ethtool -S output for vmxnet3 interface. Register dump of ethtool should dump registers for all tx and rx queues. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Provide required number of bytes in first SG bufferShreyas Bhatewara1-14/+9
This is a performance enhancement fix. vmxnet3 device performs better when provided with at least 54 bytes (ethernet 14 + IP 20+ TCP 20) in the first SG buffer. For UDP packets driver provides lesser than that in first sg. This change fixes the same. Also avoid the redundant pskb_may_pull() call. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Enable HW Rx VLAN stripping by defaultShreyas Bhatewara1-13/+1
Make hw vlan tag stripping as enabled by default. Thereby remove the code to conditionally enable it later. Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Preserve the MAC address configured by ifconfigShreyas Bhatewara1-0/+5
While activating the device get it's MAC address from netdev. This will allow the MAC address configured using ifconfig to persist through the reset. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: fix ring size updateShreyas Bhatewara1-1/+1
Fix a bug while changing ring size when MTU is changed. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21drivers/net/*/: Use static constJoe Perches1-1/+3
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-20vmxnet3: locking problems in xmitDan Carpenter1-1/+3
There were several paths that didn't release their locks. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16net: Fix drivers advertising HW_CSUM feature to use csum_startMichał Mirosław1-2/+2
Some drivers are using skb_transport_offset(skb) instead of skb->csum_start for NETIF_F_HW_CSUM offload. This does not matter now, but if someone implements checksumming of encapsulated packets then this will break silently. TSO output paths are left as they are, since they are for IP+TCP only (might be worth converting though). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-12drivers/net: don't use flush_scheduled_work()Tejun Heo1-1/+1
flush_scheduled_work() is on its way out. This patch contains simple conversions to replace flush_scheduled_work() usage with direct cancels and flushes. Directly cancel the used works on driver detach and flush them in other cases. The conversions are mostly straight forward and the only dangers are, * Forgetting to cancel/flush one or more used works. * Cancelling when a work should be flushed (ie. the work must be executed once scheduled whether the driver is detaching or not). I've gone over the changes multiple times but it would be much appreciated if you can review with the above points in mind. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: e1000-devel@lists.sourceforge.net Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: netdev@vger.kernel.org
2010-11-28vmxnet3: fix compilation when RSS is disabledScott J. Goldman1-1/+4
If RSS is disabled, we can ifdef out some RSS specific code. This fixes the compile error found by Randy Dunlap. Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19net-next: Add multiqueue support to vmxnet3 driverShreyas Bhatewara3-274/+921
Add multiqueue support to vmxnet3 driver This change adds multiqueue and thus receive side scaling support to vmxnet3 device driver. Number of rx queues is limited to 1 in cases where MSI is not configured or one MSIx vector is not available per rx queue Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30vmxnet: trivial annotation of protocol constantHarvey Harrison1-1/+1
Noticed by sparse: drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16 drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16 drivers/net/vmxnet3/vmxnet3_drv.c:876:24: warning: restricted __be16 degrades to integer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30vmxnet3: remove unnecessary byteswapping in BAR writing macrosHarvey Harrison1-4/+4
readl/writel swap to little-endian internally. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vmxnet3: fix typo setting confPAHarvey Harrison1-1/+1
It's a le64, not a le32, typo in one place only. Noticed by sparse: drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: warning: incorrect type in assignment (different base types) drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: expected restricted __le64 [usertype] confPA drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: got restricted __le32 [usertype] <noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vmxnet3: annotate hwaddr members as __iomem pointersHarvey Harrison1-2/+2
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vmxnet3: remove set_flag_le{16,64} helpersHarvey Harrison5-41/+22
It's easier to just annotate the constants as little endian types and set/clear the flags directly. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vmxnet3: make bit twiddle routines inlinestephen hemminger2-20/+14
Gcc doesn't usually handle inline across compilation units, and the functions don't have to be global in scope. Move the set/reset flag functions int the existing vmxnet3 header. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross1-1/+1
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet1-2/+2
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25net-next: Fix an overflow bug in vmxnet3 Tx descriptorBhavesh Davda2-6/+11
Fix an overflow bug in vmxnet3 Tx descriptor This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing into the 'gen' bit in the descriptor thereby corrupting the descriptor and stalling the transmit ring. Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Matthew Delco <delcoM@vmware.com> Signed-off-by: Ronghua Zhang <ronghua@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net-next: vmxnet3 fixes [5/5] Respect the interrupt type in VM configurationShreyas Bhatewara2-5/+12
Respect the interrupt type set in VM configuration. When interrupt type is not auto, do not ignore the interrupt type set from VM configuration. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net-next: vmxnet3 fixes [4/5] Do not reset when the device is not openedShreyas Bhatewara1-0/+2
Hold rtnl_lock to get the right link state. While asynchronously resetting the device, hold rtnl_lock to get the right value from netif_running. If a reset is scheduled, and the device goes thru close and open, it may happen that reset and open may run in parallel. Holding rtnl_lock will avoid this. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18net-next: vmxnet3 fixes [3/5] Initialize link state at probe timeShreyas Bhatewara1-5/+8
This change initializes the state of link at the time when driver is loaded. The ethtool output for 'link detected' and 'link speed' is thus valid even before the interface is brought up. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15net-next: vmxnet3 fixes [2/5] Interrupt control bitmapRonghua Zang2-1/+10
A new bit map 'intrCtrl' is introduced in the DriverShared area. The driver should update VMXNET3_IC_DISABLE_ALL bit before writing IMR. Signed-off-by: Ronghua Zang <ronghua@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15net-next: fix LRO feature update in vmxnet3Shreyas Bhatewara1-2/+3
Fix LRO feature update. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30vmxnet3: Remove incorrect implementation of ethtool_ops::get_flags()Ben Hutchings1-7/+1
Only some netdev feature flags correspond directly to ethtool feature flags. ethtool_op_get_flags() does the right thing. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29vmxnet3: fail when try to setup unsupported featuresStanislaw Gruszka1-2/+7
Return EOPNOTSUPP in ethtool_ops->set_flags. Fix coding style while at it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/vmxnet3: Use kzallocJulia Lawall1-2/+1
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10net: trans_start cleanupsEric Dumazet1-1/+0
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13drivers: net: last_rx eliminationEric Dumazet1-1/+0
Network drivers do not have to update last_rx, unless they need it for their private use. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03net: convert multicast list to list_headJiri Pirko1-3/+3
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: convert multiple drivers to use netdev_for_each_mc_addr, part6Jiri Pirko1-7/+4
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko1-4/+4
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches1-2/+2
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17vmxnet3: using csum_ipv6_magic requires including net/ip6_checksum.hStephen Rothwell1-0/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net: Getting rid of the x86 dependency to built vmxnet3Shreyas Bhatewara4-187/+438
This patch removes config dependency on x86 to build vmxnet3 driver. Thus the driver can be built on big endian architectures now. Although vmxnet3 is not supported on VMs other than x86 architecture, all this code goes in to ensure correctness. If the code is not dependent on x86, it should not assume little endian architecture in any of its operations. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28vmxnet3: remove duplicate #includeShreyas Bhatewara1-5/+0
Remove duplicate headerfile includes from vmxnet3_int.h Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-16vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=nRandy Dunlap2-10/+19
vmxnet3 was using dprintk() for debugging output. This was defined in <linux/dst.h> and was the only thing that was used from that header file. This caused compile errors when CONFIG_BLOCK was not enabled due to bio* and BIO* uses in the header file, so change this driver to use dev_dbg() for debugging output. include/linux/dst.h:520: error: dereferencing pointer to incomplete type include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function) include/linux/dst.h:521: error: dereferencing pointer to incomplete type include/linux/dst.h:522: error: dereferencing pointer to incomplete type include/linux/dst.h:525: error: dereferencing pointer to incomplete type make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14vmxnet: fix 2 build problemsRandy Dunlap1-1/+10
vmxnet3 uses in_dev* interfaces so it should depend on INET. Also fix so that the driver builds when CONFIG_PCI_MSI is disabled. vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy' drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: VMware virtual Ethernet NIC driver: vmxnet3Shreyas Bhatewara6-0/+4177
Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara@vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Ronghua Zhang <ronghua@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 08:53:18 +0000