summaryrefslogtreecommitdiffstats
path: root/drivers/net/usb/r8152.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-05r8152: adjust the settings of ups flagsHayes Wang1-88/+120
The UPS feature only works for runtime suspend, so UPS flags only need to be set before enabling runtime suspend. Therefore, I create a struct to record relative information, and use it before runtime suspend. All chips could record such information, even though not all of them support the feature of UPS. Then, some functions could be combined. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05r8152: modify rtl8152_set_speed functionHayes Wang1-64/+132
First, for AUTONEG_DISABLE, we only need to modify MII_BMCR. Second, add advertising parameter for rtl8152_set_speed(). Add RTL_ADVERTISED_xxx for advertising parameter of rtl8152_set_speed(). Then, the advertising settings from ethtool could be saved. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+1
r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28r8152: remove calling netif_napi_delHayes Wang1-2/+0
Remove unnecessary use of netif_napi_del. This also avoids to call napi_disable() after netif_napi_del(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Revert "r8152: napi hangup fix after disconnect"Hayes Wang1-2/+1
This reverts commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5. The commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect") adds a check about RTL8152_UNPLUG to determine if calling napi_disable() is invalid in rtl8152_close(), when rtl8152_disconnect() is called. This avoids to use napi_disable() after calling netif_napi_del(). Howver, commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real disconnection") causes that RTL8152_UNPLUG is not always set when calling rtl8152_disconnect(). Therefore, I have to revert commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect"), first. And submit another patch to fix it. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+4
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25r8152: Set memory to all 0xFFs on failed reg readsPrashant Malani1-1/+4
get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by: Prashant Malani <pmalani@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23r8152: add a helper function about setting EEEHayes Wang1-91/+77
Add a helper function "rtl_eee_enable" for setting EEE. Besides, I move r8153_eee_en() and r8153b_eee_en(). And, I remove r8152b_enable_eee(), r8153_set_eee(), and r8153b_set_eee(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23r8152: saving the settings of EEEHayes Wang1-30/+50
Saving the settings of EEE to avoid they become the default settings after reset_resume(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20r8152: divide the tx and rx bottom functionsHayes Wang1-13/+26
Move the tx bottom function from NAPI to a new tasklet. Then, for multi-cores, the bottom functions of tx and rx may be run at same time with different cores. This is used to improve performance. On x86, Tx/Rx 943/943 Mbits/sec -> 945/944. For arm platform, Tx/Rx: 917/917 Mbits/sec -> 933/933. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19r8152: fix accessing skb after napi_gro_receiveHayes Wang1-1/+1
Fix accessing skb after napi_gro_receive which is caused by commit 47922fcde536 ("r8152: support skb_add_rx_frag"). Fixes: 47922fcde536 ("r8152: support skb_add_rx_frag") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13r8152: change rx_copybreak and rx_pending through ethtoolHayes Wang1-5/+86
Let the rx_copybreak and rx_pending could be modified by ethtool. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: support skb_add_rx_fragHayes Wang1-15/+105
Use skb_add_rx_frag() to reduce the memory copy for rx data. Use a new list of rx_used to store the rx buffer which couldn't be reused yet. Besides, the total number of rx buffer may be increased or decreased dynamically. And it is limited by RTL8152_MAX_RX_AGG. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: use alloc_pages for rx bufferHayes Wang1-20/+11
Replace kmalloc_node() with alloc_pages() for rx buffer. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: replace array with linking list for rx informationHayes Wang1-57/+125
The original method uses an array to store the rx information. The new one uses a list to link each rx structure. Then, it is possible to increase/decrease the number of rx structure dynamically. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: separate the rx buffer sizeHayes Wang1-4/+8
The different chips may accept different rx buffer sizes. The RTL8152 supports 16K bytes, and RTL8153 support 32K bytes. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-02r8152: fix typo in register nameKevin Lo1-6/+6
It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05r8152: set RTL8152_UNPLUG only for real disconnectionHayes Wang1-11/+16
Set the flag of RTL8152_UNPLUG if and only if the device is unplugged. Some error codes sometimes don't mean the real disconnection of usb device. For those situations, set the flag of RTL8152_UNPLUG causes the driver skips some flows of disabling the device, and it let the device stay at incorrect state. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03r8152: move calling r8153b_rx_agg_chg_indicate()Hayes Wang1-10/+26
r8153b_rx_agg_chg_indicate() needs to be called after enabling TX/RX and before calling rxdy_gated_en(tp, false). Otherwise, the change of the settings of RX aggregation wouldn't work. Besides, adjust rtl8152_set_coalesce() for the same reason. If rx_coalesce_usecs is changed, restart TX/RX to let the setting work. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01r8152: fix the setting of detecting the linking change for runtime suspendHayes Wang1-11/+27
1. Rename r8153b_queue_wake() to r8153_queue_wake(). 2. Correct the setting. The enable bit should be 0xd38c bit 0. Besides, the 0xd38a bit 0 and 0xd398 bit 8 have to be cleared for both enabled and disabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-22r8152: sync sa_family with the media type of network deviceCrag.Wang1-0/+2
Without this patch the socket address family sporadically gets wrong value ends up the dev_set_mac_address() fails to set the desired MAC address. Fixes: 25766271e42f ("r8152: Refresh MAC address during USBDEVFS_RESET") Signed-off-by: Crag.Wang <crag.wang@dell.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-By: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06r8152: Refresh MAC address during USBDEVFS_RESETMario Limonciello1-15/+35
On some platforms it is possible to dynamically change the policy of what MAC address is selected from the ASL at runtime. These tools will reset the USB device and expect the change to be made immediately. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06r8152: remove extra action copying ethernet addressMario Limonciello1-1/+0
This already happens later on in `rtl8152_set_mac_address` Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22r8152: Fix an error on RTL8153-BD MAC Address Passthrough supportDavid Chen1-1/+1
RTL8153-BD is used in Dell DA300 type-C dongle. Added RTL8153-BD support to activate MAC address pass through on DA300. Apply correction on previously submitted patch in net.git tree. Signed-off-by: David Chen <david.chen7@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18r8152: Add support for MAC address pass through on RTL8153-BDDavid Chen1-2/+3
RTL8153-BD is used in Dell DA300 type-C dongle. It should be added to the whitelist of devices to activate MAC address pass through. Per confirming with Realtek all devices containing RTL8153-BD should activate MAC pass through and there won't use pass through bit on efuse like in RTL8153-AD. Signed-off-by: David Chen <david.chen7@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14r8152: Add support for MAC address pass through on RTL8153-BNDMario Limonciello1-11/+22
All previous docks and dongles that have supported this feature use the RTL8153-AD chip. RTL8153-BND is a new chip that will be used in upcoming Dell type-C docks. It should be added to the whitelist of devices to activate MAC address pass through. Per confirming with Realtek all devices containing RTL8153-BND should activate MAC pass through and there won't use pass through bit on efuse like in RTL8153-AD. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29r8152: Check for supported Wake-on-LAN ModesFlorian Fainelli1-0/+3
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 21ff2e8976b1 ("r8152: support WOL") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20r8152: disable RX aggregation on new Dell TB16 dockKai-Heng Feng1-2/+2
There's a new Dell TB16 dock with a different iSerialNumber. Apply the same fix from commit 0b1655143df0 ("r8152: disable RX aggregation on Dell TB16 dock") to this model. BugLink: https://bugs.launchpad.net/bugs/1785780 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11drivers/net/usb/r8152: remove the unneeded variable "ret" in ↵zhong jiang1-2/+1
rtl8152_system_suspend rtl8152_system_suspend defines the variable "ret", but it is not modified after initialization. So just remove it. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net: usb: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26r8152: napi hangup fix after disconnectJiri Slaby1-1/+2
When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22net: usb: r8152: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-4/+6
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26r8152: fix tx packets accountingEric Dumazet1-1/+1
r8152 driver handles TSO packets (limited to ~16KB) quite well, but pretends each TSO logical packet is a single packet on the wire. There is also some error since headers are accounted once, but error rate is small enough that we do not care. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-02r8152: set rx mode early when linking onHayes Wang1-2/+3
Set rx mode before calling netif_wake_queue() when linking on to avoid the device missing the receiving packets. The transmission may start after calling netif_wake_queue(), and the packets of resopnse may reach before calling rtl8152_set_rx_mode() which let the device could receive packets. Then, the packets of response would be missed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-02r8152: fix wrong checksum status for received IPv4 packetsHayes Wang1-5/+3
The device could only check the checksum of TCP and UDP packets. Therefore, for the IPv4 packets excluding TCP and UDP, the check of checksum is necessary, even though the IP checksum is correct. Take ICMP for example, The IP checksum may be correct, but the ICMP checksum may be wrong. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17r8152: disable RX aggregation on Dell TB16 dockKai-Heng Feng1-0/+13
r8153 on Dell TB15/16 dock corrupts rx packets. This change is suggested by Realtek. They guess that the XHCI controller doesn't have enough buffer, and their guesswork is correct, once the RX aggregation gets disabled, the issue is gone. ASMedia is currently working on a real sulotion for this issue. Dell and ODM confirm the bcdDevice and iSerialNumber is unique for TB16. Note that TB15 has different bcdDevice and iSerialNumber, which are not unique values. If you still have TB15, please contact Dell to replace it with TB16. BugLink: https://bugs.launchpad.net/bugs/1729674 Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24drivers/net/usb: add device id for TP-LINK UE300 USB 3.0 EthernetRan Wang1-0/+2
This product is named 'TP-LINK USB 3.0 Gigabit Ethernet Network Adapter (Model No.is UE300)'. It uses chip RTL8153 and works with driver drivers/net/usb/r8152.c Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01r8152: add Linksys USB3GIGV1 idGrant Grundler1-0/+2
This linksys dongle by default comes up in cdc_ether mode. This patch allows r8152 to claim the device: Bus 002 Device 002: ID 13b1:0041 Linksys Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: r8152: constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21r8152: correct the definitionhayeswang1-11/+11
Replace VLAN_HLEN and CRC_SIZE with ETH_FCS_LEN. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: move calling delay_autosuspend functionhayeswang1-7/+5
Move calling delay_autosuspend() in rtl8152_runtime_suspend(). Calling delay_autosuspend() as late as possible. The original flows are 1. check if the driver/device is busy now. 2. set wake events. 3. enter runtime suspend. If the wake event occurs between (1) and (2), the device may miss it. Besides, to avoid the runtime resume occurs after runtime suspend immediately, move the checking to the end of rtl8152_runtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: split rtl8152_resume functionhayeswang1-38/+61
Split rtl8152_resume() into rtl8152_runtime_resume() and rtl8152_system_resume(). Besides, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: add byte_enable for ocp_read_word functionhayeswang1-1/+3
Add byte_enable for ocp_read_word() to replace reading 4 bytes data with reading the desired 2 bytes data. This is used to avoid the issue which is described in commit b4d99def0938 ("r8152: remove sram_read"). The original method always reads 4 bytes data, and it may have problem when reading the PHY registers. The new method is supported since RTL8153B, but it doesn't influence the previous chips. The bits of the byte_enable for the previous chips are the reserved bits, and the hw would ignore them. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: support RTL8153Bhayeswang1-15/+658
This patch supports two new chips for RTL8153B. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: support new chip 8050hayeswang1-0/+10
The settings of the new chip are the same with RTL8152, except that its product ID is 0x8050. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13r8152: give the device versionOliver Neukum1-0/+2
Getting the device version out of the driver really aids debugging. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: replace napi_complete with napi_complete_donehayeswang1-1/+3
Change from using napi_complete to napi_complete_done to allow for the use of gro_flush_timeout in tuning network processing. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-08 01:03:27 +0000