summaryrefslogtreecommitdiffstats
path: root/drivers/net/team
AgeCommit message (Collapse)AuthorFilesLines
2013-09-03net: team: inherit addr_assign_type along with dev_addrBjørn Mork1-1/+1
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26team: cleanup netpoll clodestephen hemminger1-17/+8
This started out with fixing a sparse warning, then I realized that the wrapper function team_netpoll_info could just be collapsed away by rolling it into the enable code. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23team: add support for sending multicast rejoinsJiri Pirko1-0/+85
Similar to what is implemented in bonding. User is able to ask team driver to send IGMP rejoins in case port is enabled or disabled. Using previously introduced netdev notifier. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23net: convert resend IGMP to notifier eventJiri Pirko1-0/+4
Until now, bond_resend_igmp_join_requests() looks for vlans attached to bonding device, bridge where bonding act as port manually. It does not care of other scenarios, like stacked bonds or team device above. Make this more generic and use netdev notifier to propagate the event to upper devices and to actually call ip_mc_rejoin_groups(). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23team: add peer notificationJiri Pirko1-0/+87
When port is enabled or disabled, allow to notify peers by unsolicitated NAs or gratuitous ARPs. Disabled by default. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-1/+5
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: remove synchronize_rcu() called during port disableJiri Pirko3-18/+8
Check the unlikely case of team->en_port_count == 0 before modulo operation. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: use kfree_rcu instead of synchronize_rcu in team_port_devJiri Pirko1-2/+1
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: remove synchronize_rcu() called during queue override changeJiri Pirko1-16/+47
This patch removes synchronize_rcu() from function __team_queue_override_port_del(). That can be done because it is ok to do list_del_rcu() and list_add_tail_rcu() on the same list_head member without calling synchronize_rcu() in between. A bit of refactoring needed to be done because INIT_LIST_HEAD needed to be removed (to not kill the forward pointer) as well. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: move add to port list before port enablementJiri Pirko1-1/+1
team_port_enable() adds port to port_hashlist. Reader sees port in team_get_port_by_index_rcu() and returns it, but team_get_first_port_txable_rcu() tries to go through port_list, where the port is not inserted yet -> NULL pointer dereference. Fix this by reordering port_list and port_hashlist insertion. Panic is easily triggeable when txing packets and adding/removing port in a loop. Introduced by commit 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: check return value of team_get_port_by_index_rcu() for NULLJiri Pirko2-0/+4
team_get_port_by_index_rcu() might return NULL due to race between port removal and skb tx path. Panic is easily triggeable when txing packets and adding/removing port in a loop. introduced by commit 3d249d4ca "net: introduce ethernet teaming device" and commit 753f993911b "team: introduce random mode" (for random mode) Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+4
Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31team: fix port list dump for big number of portsJiri Pirko1-3/+4
In case the port list dump does not fit into one skb currently the dump would start over again. Fix this by continue from the last dumped port. Introduced by commit d90f889e9c (team: handle sending port list in the same way option list is sent) Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko1-1/+1
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-07drivers/net: rename random32() to prandom_u32()Akinobu Mita1-1/+1
Use preferable function name which implies using a pseudo-random number generator. [akpm@linux-foundation.org: convert team_mode_random.c] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: Jean-Paul Roubelat <jpr@f6fbb.org> Cc: Bing Zhao <bzhao@marvell.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy1-5/+5
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-3/+3
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15team: Use new sync_multiple api to sync devices adressess.Vlad Yasevich1-2/+2
Team drivers attempts to sync addresses to each of the port devices; however, the current api doesn't really perform the sync for any device after the first one. Switch to using the new api that will actually sync the addresses to all ports. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09team: make local function staticstephen hemminger1-3/+3
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07team: unsyc the devices addresses when port is removedVlad Yasevich1-0/+2
When a team port is removed, unsync all devices addresses that may have been synched to the port devices. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06team: introduce random modeJiri Pirko4-21/+85
As suggested by Eric Dumazet, allow user to select mode which chooses TX port randomly. Functionality should be more of less similar to round-robin mode with even lower overhead. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06team: introduce two default team_modeop functions and use them in modesJiri Pirko3-27/+20
No need to duplicate code for this. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-06team: allow userspace to take control over carrierFlavio Leitner1-0/+8
Some modes don't require any special carrier handling so in these cases, the kernel can control the carrier as for any other interface. However, some other modes, e.g. lacp, requires more than just that, so userspace needs to control the carrier itself. The daemon today is ready to control it, but the kernel still can change it based on events. This fix so that either kernel or userspace is controlling the carrier. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04team: ab: set active port option as changed when port is leavingJiri Pirko1-1/+12
In case port is leaving the team, set the option "activeport" as changed so the change can be properly propagated to userspace Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04team: move netlink event notifiers after team_port_leave()Jiri Pirko1-4/+6
In team_port_del(), there is need to be do all the cleanup related things first and netlink event notifiers should be called after that. This fixes two problems: team carrier is now correctly set (port is removed from list first) mode can set option as changed in .port_leave op Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04team: handle sending port list in the same way option list is sentJiri Pirko1-84/+93
Essentially do the same thing with port list as with option list. Multipart netlink message. Side effect is that port event message can send port which is not longer in team->port_list. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11drivers/net/team: remove depends on CONFIG_EXPERIMENTALKees Cook1-2/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jiri Pirko <jpirko@redhat.com>
2013-01-06team: use strlcpy with ethtool_drvinfo fieldsFlavio Leitner1-2/+2
The fields must be null-terminated. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04team: remove usage of netdev_set_master()Jiri Pirko1-6/+7
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko1-2/+0
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03team: update master carrier stateFlavio Leitner1-2/+22
Update master's carrier state when there is any change with its ports. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30team: add ethtool supportFlavio Leitner1-0/+17
This patch adds few ethtool operations to team driver. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30team: implement carrier changeFlavio Leitner1-0/+10
The user space teamd daemon may need to control the master's carrier state depending on the selected mode. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28team: fix hw_features setupJiri Pirko1-1/+3
Do this in the same way bonding does. This fixed setup resolves performance issues when using some cards with certain offloading. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-21team: bcast: convert return value of team_dev_queue_xmit() to bool correctlyJiri Pirko1-3/+3
The thing is that team_dev_queue_xmit() returns NET_XMIT_* or -E*. bc_trasmit() should return true in case all went well. So use ! to get correct retval from team_dev_queue_xmit() result. This bug caused iface statistics to be badly computed. This bug was introduced by: team: add broadcast mode (5fc889911a99043a97da1daa0d010ad72cbc3042) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04team: set qdisc_tx_busylock to avoid LOCKDEP splatEric Dumazet1-0/+2
If a qdisc is installed on a team device, its possible to get a lockdep splat under stress, because nested dev_queue_xmit() can lock busylock a second time (on a different device, so its a false positive) Avoid this problem using a distinct lock_class_key for team devices. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jpirko@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+6
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27team: fix return value checkWei Yongjun1-6/+6
In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-22team: send port changed when addedJiri Pirko1-8/+24
On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21team: send port changed when addedJiri Pirko1-8/+25
On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman1-19/+19
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24team: do not allow to add VLAN challenged port when vlan is usedJiri Pirko1-0/+7
Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24team: don't print warn message on -ESRCH during event sendJiri Pirko1-4/+4
When no one is listening on NL socket, -ESRCH is returned and warning message is printed. This message is confusing people and in fact has no meaning. So do not print it in this case. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+9
2012-08-20team: add support for non-ethernet devicesJiri Pirko4-32/+77
This is resolved by two things: 1) allow dev_addr of different length than ETH_ALEN 2) during port add, check for dev->type and change it if necessary Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()Amerigo Wang1-7/+9
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03team: add support for queue override by setting queue_id for portJiri Pirko1-2/+161
Similar to what bonding has. This allows to set queue_id for port so this port will be used when skb with matching skb->queue_mapping is going to be transmitted. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03team: add per port priority optionJiri Pirko1-0/+25
Allow userspace to set port priority. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 02:31:43 +0000