summaryrefslogtreecommitdiffstats
path: root/drivers/net/rionet.c
AgeCommit message (Collapse)AuthorFilesLines
2016-10-20net: use core MTU range checking in misc driversJarod Wilson1-12/+3
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26drivers: net: remove NETDEV_TX_LOCKEDFlorian Westphal1-5/+1
replace the trylock by a full spin_lock and remove TX_LOCKED return value. Followup patch will remove TX_LOCKED from the kernel. Cc: Jon Mason <jdmason@kudzu.us> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22rapidio/rionet: add mport removal handlingAlexandre Bounine1-26/+44
Add handling of a local mport device removal. RIONET driver registers itself as class interface that supports only removal notification, 'add_device' callback is not provided because RIONET network device can be initialized only after enumeration is completed and the existing method (using remote peer addition) satisfies this condition. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/rionet: add locking into add/remove deviceAlexandre Bounine1-50/+102
Add spinlock protection when handling list of connected peers and ability to handle new peer device addition after the RIONET device was open. Before his update RIONET was sending JOIN requests only when it have been opened, peer devices added later have been missing from this process. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/rionet: add shutdown event handlingAlexandre Bounine1-0/+38
Add shutdown notification handler which terminates active connections with remote RapidIO nodes. This prevents remote nodes from sending packets to the powered off node and eliminates hardware error events on remote nodes. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/rionet: add capability to change MTUAurelien Jacquiot1-2/+15
These patches are the result of extensive collaboration within the RapidIO.org Software Task Group between Texas Instruments, Freescale, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes the capabilities of RapidIO devices directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. The Software Task Group has also developed fabric management, Remote Memory Access, and sockets applications which make use of these interfaces in user space. Intensive testing with these applications prompted the RapidIO subsystem updates provided within this set of patches. This patch (of 29): Replace default Ethernet-specific routine by the custom one to allow setting of larger MTU supported by RapidIO messaging (max RIO packet size is 4096 bytes). Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/rionet: fix deadlock on SMPAurelien Jacquiot1-2/+2
Fix deadlocking during concurrent receive and transmit operations on SMP platforms caused by the use of incorrect lock: on transmit 'tx_lock' spinlock should be used instead of 'lock' which is used for receive operation. This fix is applicable to kernel versions starting from v2.15. Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-05bus: subsys: update return type of ->remove_dev() to voidViresh Kumar1-3/+1
Its return value is not used by the subsys core and nothing meaningful can be done with it, even if we want to use it. The subsys device is anyway getting removed. Update prototype of ->remove_dev() to make its return type as void. Fix all usage sites as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07rapidio: rework device hierarchy and introduce mport class of devicesAlexandre Bounine1-0/+1
This patch removes an artificial RapidIO bus root device and establishes actual device hierarchy by providing reference to real parent devices. It also introduces device class for RapidIO controller devices (on-chip or an eternal bridge, known as "mport"). Existing implementation was sufficient for SoC-based platforms that have a single RapidIO controller. With introduction of devices using multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme is very limiting or does not work at all. The implemented changes allow to properly reference platform's local RapidIO mport devices and provide device details needed for upper layers. This change to RapidIO device hierarchy does not break any known existing kernel or user space interfaces. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com> Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rapidio/rionet: rework driver initialization and removalAlexandre Bounine1-25/+78
Rework probe/remove routines to prevent rionet driver from monopolizing target RapidIO devices. Fix conflict with modular RapidIO switch drivers. Using one of RapidIO messaging channels rionet driver provides a service layer common to all endpoint devices in a system's RapidIO network. These devices may also require their own specific device driver which will be blocked from attaching to the target device by rionet (or block rionet if loaded earlier). To avoid conflict with device-specific drivers, the rionet driver is reworked to be registered as a subsystem interface on the RapidIO bus. The reworked rio_remove_dev() and rionet_exit() routines also include handling of individual rionet peer device removal which was not supported before. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko1-4/+4
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06rapidio/rionet: rework to support multiple RIO master portsAlexandre Bounine1-63/+70
Make RIONET driver multi-net safe/capable by introducing per-net lists of RapidIO network peers. Rework registration of network adapters to support all available RIO master port devices. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06rapidio/rionet: fix multicast packet transmit logicAlexandre Bounine1-3/+17
Fix multicast packet transmit logic to account for repetitive transmission of single skb: - correct check for available buffers (this bug may produce NULL pointer crash dump in case of heavy traffic); - update skb user count (incorrect user counter causes a warning dump from net_tx_action routine during multicast transfers in systems with three or more rionet participants). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-01rionet: fix page allocation order of rionet_activeAkinobu Mita1-5/+6
rionet_active is allocated from the page allocator and the allocation order is calculated on the assumption that the page size is 4KB, so it wastes memory on more than 4K page systems. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches1-2/+0
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-02drivers/net/rionet.c: fix ethernet address macros for LE platformsAlexandre Bounine1-2/+2
Modify Ethernet addess macros to be compatible with BE/LE platforms Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Chul Kim <chul.kim@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: <stable@kernel.org> [2.6.39+] Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25rapidio: fix use of non-compatible registersAlexandre Bounine1-15/+8
Replace/remove use of RIO v.1.2 registers/bits that are not forward-compatible with newer versions of RapidIO specification. RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR, Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR. Use of removed (since RIO v.1.3) register bits affects users of currently available 1.3 and 2.x compliant devices who may use not so recent kernel versions. Removing checks for unsupported bits makes corresponding routines compatible with all versions of RapidIO specification. Therefore, backporting makes stable kernel versions compliant with RIO v.1.3 and later as well. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Chul Kim <chul.kim@idt.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-05Merge branch 'master' of ↵David S. Miller1-13/+15
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-04net: rionet: Use is_multicast_ether_addrTobias Klauser1-1/+1
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29rionet: fix NULL pointer dereference in rionet_removeYinglin Luan1-13/+15
Function rionet_remove initializes local variable 'ndev' to NULL and do nothing changes before the call to unregister_netdev(ndev), this could cause a NULL pointer dereference. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Yinglin Luan <synmyth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22rionet: Remove pointless printk of skb pointer.David S. Miller1-2/+2
Casting to u32 warns anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23rapidio: modify subsystem and driver initialization sequenceAlexandre Bounine1-1/+1
Subsystem initialization sequence modified to support presence of multiple RapidIO controllers in the system. The new sequence is compatible with initialization of PCI devices. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rapidio: modify configuration to support PCI-SRIO controllerAlexandre Bounine1-2/+2
1. Add an option to include RapidIO support if the PCI is available. 2. Add FSL_RIO configuration option to enable controller selection. 3. Add RapidIO support option into x86 and MIPS architectures. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-26rionet: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-09-21trivial: fix typo "for for" in multiple filesAnand Gadiyar1-1/+1
trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy1-1/+1
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: remove NET_RX_BAD and NET_RX_CN* definesFlorian Westphal1-5/+0
almost no users in the tree; and the few that use them treat them like NET_RX_DROP. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16rionet: convert to net_device_opsAlexander Beregalov1-4/+10
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26drivers/net/rionet.c: remove some pointless conditionals before kfree_skb()Wei Yongjun1-2/+1
Remove some pointless conditionals before kfree_skb(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12netdevice: safe convert to netdev_priv() #part-2Wang Chen1-13/+13
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg1-3/+2
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29[RAPIDIO] Auto-probe the RapidIO system sizeZhang Wei1-2/+14
The RapidIO system size will auto probe in RIO setup. The route table and rionet_active in rionet.c are changed to be allocated dynamically according to the size of the system. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches1-3/+3
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET] drivers/net: statistics cleanup #1 -- save memory and shrink codeJeff Garzik1-14/+6
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle1-2/+0
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo1-1/+0
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik1-1/+1
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2005-09-14[PATCH] Add rapidio net driverMatt Porter1-0/+574
Adds an "Ethernet" driver which sends Ethernet packets over the standard RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell access. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>