summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
2022-08-08net: phy: dp83867: fix get nvmem cell failNikita Shubin1-1/+1
If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl" is completely missing in Device Tree and we should use default values. Check -EOPNOTSUPP togather with -ENOENT to avoid this situation. Fixes: 5c2d0a6a0701 ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell") Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805084843.24542-1-nikita.shubin@maquefel.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08net: phy: c45 baset1: do not skip aneg configuration if clock role is not ↵Oleksij Rempel1-18/+16
specified In case master/slave clock role is not specified (which is default), the aneg registers will not be written. The visible impact of this is missing pause advertisement. So, rework genphy_c45_baset1_an_config_aneg() to be able to write advertisement registers even if clock role is unknown. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-03net: phy: Warn about incorrect mdio_bus_phy_resume() stateFlorian Fainelli1-0/+6
Calling mdio_bus_phy_resume() with neither the PHY state machine set to PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication that we can produce a race condition looking like this: CPU0 CPU1 bcmgenet_resume -> phy_resume -> phy_init_hw -> phy_start -> phy_resume phy_start_aneg() mdio_bus_phy_resume -> phy_resume -> phy_write(..., BMCR_RESET) -> usleep() -> phy_read() with the phy_resume() function triggering a PHY behavior that might have to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix brcm_fet_config_init()") for instance) that ultimately leads to an error reading from the PHY. Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13net: phy: mxl-gpy: print firmware in human readable formMichael Walle1-2/+3
Now having a major and a minor number, also print the firmware in human readable form "major.minor". Still keep the 4-digit hexadecimal representation because that form is used in the firmware changelog documents. Also, drop the "release" string assuming that most common case, but make it clearer that the user is running a test version. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: phy: mxl-gpy: rename the FW type field nameMichael Walle1-5/+5
Align the firmware field name with the reference manual where it is called "major". Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: phy: mxl-gpy: cache PHY firmware versionMichael Walle1-19/+20
Cache the firmware version during probe. There is no need to read the firmware version on every autonegotiation. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: phy: mxl-gpy: fix version reportingMichael Walle1-5/+6
The commit 09ce6b20103b ("net: phy: mxl-gpy: add temperature sensor") will overwrite the return value and the reported version will be wrong. Fix it. Fixes: 09ce6b20103b ("net: phy: mxl-gpy: add temperature sensor") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08net: phylink: fix SGMII inband autoneg enableRussell King (Oracle)1-1/+3
When we are operating in SGMII inband mode, it implies that there is a PHY connected, and the ethtool advertisement for autoneg applies to the PHY, not the SGMII link. When in 1000base-X mode, then this applies to the 802.3z link and needs to be applied to the PCS. Fix this. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04net: phy: broadcom: Add support for BCM53128 internal PHYsKurt Kanzenbach1-0/+15
Add support for BCM53128 internal PHYs. These support interrupts as well as statistics. Therefore, enable the Broadcom PHY driver for them. Tested on BCM53128 switch using the mainline b53 DSA driver. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: phy: micrel: Adding LED feature for LAN8814 PHYDivya Koppera1-17/+56
LED support for extended mode where LED 1: Enhanced Mode 5 (10M/1000M/Activity) LED 2: Enhanced Mode 4 (100M/1000M/Activity) By default it supports KSZ9031 LED mode Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-6/+52
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c 9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices") fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: phylink: fix NULL pl->pcs dereference during phylink_pcs_poll_startVladimir Oltean1-1/+1
The current link mode of the phylink instance may not require an attached PCS. However, phylink_major_config() unconditionally dereferences this potentially NULL pointer when restarting the link poll timer, which will panic the kernel. Fix the problem by checking whether a PCS exists in phylink_pcs_poll_start(), otherwise do nothing. The code prior to the blamed patch also only looked at pcs->poll within an "if (pcs)" block. Fixes: bfac8c490d60 ("net: phylink: disable PCS polling over major configuration") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Gerhard Engleder <gerhard@engleder-embedded.com> Tested-by: Michael Walle <michael@walle.cc> # on kontron-kbox-a-230-ls Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sam9x60ek Link: https://lore.kernel.org/r/20220629193358.4007923-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: sfp: fix memory leak in sfp_probe()Jianglei Nie1-1/+1
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-29net: phy: ax88772a: fix lost pause advertisement configurationOleksij Rempel1-2/+4
In case of asix_ax88772a_link_change_notify() workaround, we run soft reset which will automatically clear MII_ADVERTISE configuration. The PHYlib framework do not know about changed configuration state of the PHY, so we need use phy_init_hw() to reinit PHY configuration. Fixes: dde258469257 ("net: usb/phy: asix: add support for ax88772A/C PHYs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29net: phy: Don't trigger state machine while in suspendLukas Wunner2-0/+46
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: phylink: disable PCS polling over major configurationRussell King (Oracle)1-10/+20
While we are performing a major configuration, there is no point having the PCS polling timer running. Stop it before we begin preparing for the configuration change, and restart it only once we've successfully completed the change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: phylink: remove pcs_ops memberRussell King (Oracle)1-20/+19
Remove the pcs_ops member from struct phylink, using the one stored in struct phylink_pcs instead. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: dp83822: disable rx error interruptEnguerrand de Ribaucourt1-2/+1
Some RX errors, notably when disconnecting the cable, increase the RCSR register. Once half full (0x7fff), an interrupt flood is generated. I measured ~3k/s interrupts even after the RX errors transfer was stopped. Since we don't read and clear the RCSR register, we should disable this interrupt. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: dp83822: disable false carrier interruptEnguerrand de Ribaucourt1-1/+0
When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts. Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt. In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()Russell King (Oracle)1-0/+1
The QSGMII MAC-to-PHY reply is the same as the SGMII MAC-to-PHY reply. Add support for this to phylink_mii_c22_pcs_encode_advertisement(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: mxl-gpy: add temperature sensorMichael Walle2-0/+108
The GPY115 and GPY2xx PHYs contain an integrated temperature sensor. It accuracy is +/- 5°C. Add support for it. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220622141716.3517645-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: nxp-tja11xx: use devm_hwmon_sanitize_name()Michael Walle1-8/+3
Instead of open-coding the bad characters replacement in the hwmon name, use the new devm_hwmon_sanitize_name(). Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: sfp: use hwmon_sanitize_name()Michael Walle1-7/+3
Instead of open-coding the bad characters replacement in the hwmon name, use the new hwmon_sanitize_name(). Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: Add support for 1PPS out and external timestampsJonathan Lemon1-0/+226
The perout function is used to generate a 1PPS signal, synchronized to the PHC. This is accomplished by a using the hardware oneshot functionality, which is reset by a timer. The external timestamp function is set up for a 1PPS input pulse, and uses a timer to poll for temestamps. Both functions use the SYNC_OUT/SYNC_IN1 pin, so cannot run simultaneously. Co-developed-by: Lasse Johnsen <l@ssejohnsen.me> Signed-off-by: Lasse Johnsen <l@ssejohnsen.me> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: broadcom: Add PTP support for some Broadcom PHYs.Jonathan Lemon3-0/+724
This adds PTP support for BCM54210E Broadcom PHYs, in particular, the BCM54213PE, as used in the Rasperry PI CM4. It has only been tested on that hardware. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-libJonathan Lemon2-4/+48
Add 'struct bcm_ptp_private' to bcm54xx_phy_priv which points to an optional PTP structure attached to the PHY. This is allocated on probe if PHY PTP support is configured, and if the driver supports PTP for the specified PHY. Add the bcm_ptp_probe(), bcm_ptp_config_init() and bcn_ptp_stop() API functions to the bcm-phy library. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+24
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22net: phy: Add support for AQR113C EPHYBhadram Varka1-0/+20
Add support multi-gigabit and single-port Ethernet PHY transceiver (AQR113C). Signed-off-by: Bhadram Varka <vbhadram@nvidia.com> Link: https://lore.kernel.org/r/20220621034027.56508-1-vbhadram@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21net: phy: dp83td510: add SQI supportOleksij Rempel1-0/+49
Convert MSE (mean-square error) values to SNR and split it SQI (Signal Quality Indicator) ranges. The used ranges are taken from "OPEN ALLIANCE - Advanced diagnostic features for 100BASE-T1 automotive Ethernet PHYs" specification. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220620115601.2035452-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21net: phy: smsc: Disable Energy Detect Power-Down in interrupt modeLukas Wunner1-2/+4
Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by: Simon Han <z.han@kunbus.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21net: phy: smsc: Deduplicate interrupt acknowledgement upon phy_init_hw()Lukas Wunner1-12/+1
Since commit 4c0d2e96ba05 ("net: phy: consider that suspend2ram may cut off PHY power"), phy_init_hw() invokes both, the ->config_init() and ->config_intr() callbacks. In the SMSC PHY driver, the latter acknowledges stale interrupts, hence there's no longer a need to acknowledge them in the former as well. There are no other callers of ->config_init() besides phy_init_hw(). Drop the redundant code. Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/0254edf48bddc96c6248c4414043a3699e94614a.1655716767.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-19net: phy: at803x: fix NULL pointer dereference on AR9331 PHYOleksij Rempel1-0/+6
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-19net: phy: marvell: use mii_bmcr_encode_fixed()Russell King (Oracle)1-8/+2
Make use of the newly introduced mii_bmcr_encode_fixed() to get the BMCR value when setting loopback mode for the 88e1510. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-19net: phy: use mii_bmcr_encode_fixed()Russell King (Oracle)1-15/+3
phylib can make use of the newly introduced mii_bmcr_encode_fixed() macro, so let's convert it over. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-16net: phy: add support to get Master-Slave configurationRaju Lakkaraju1-0/+3
Add support to Master-Slave configuration and state Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: phy: dp83867: implement support for io_impedance_ctrl nvmem cellRasmus Villemoes1-6/+49
We have a board where measurements indicate that the current three options - leaving IO_IMPEDANCE_CTRL at the (factory calibrated) reset value or using one of the two boolean properties to set it to the min/max value - are too coarse. Implement support for the newly added binding allowing device tree to specify an nvmem cell containing an appropriate value for this specific board. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16phy: aquantia: Fix AN when higher speeds than 1G are not advertisedClaudiu Manoil1-1/+14
Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-15net: phy: marvell-88x2222: set proper phydev->portIvan Bornyakov1-0/+2
phydev->port was not set and always reported as PORT_TP. Set phydev->port according to inserted SFP module. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: phy: fixed_phy: set phy_mask before calling mdiobus_register()Rasmus Villemoes1-0/+1
There's no point probing for phys on this artificial bus, so we can save a little bit of boot time by telling mdiobus_register() not to do that. This doesn't have any functional change, since, at this point, fixed_mdio_read() returns 0xffff for all addresses/registers, so mdiobus_scan() -> get_phy_device() -> get_phy_c22_id() will return -ENODEV, which is just ignored. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220606200208.1665417-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: mdio: unexport __init-annotated mdio_bus_init()Masahiro Yamada1-1/+0
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06net: phy: dp83867: retrigger SGMII AN when link changeTan Tee Min1-0/+29
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-30net: phy: at803x: disable WOL at probeViorel Suman1-11/+22
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch "at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose. The problem here is that the values of these two bits are different after hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will set WAKE_MAGIC flag, even if WOL function is not enabled by calling "at803x_set_wol" function. The patch disables WOL function on probe thus the behavior is consistent. Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/20220527084935.235274-1-viorel.suman@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-28net: phy: Directly use ida_alloc()/free()Ke Liu1-3/+3
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove(). Signed-off-by: Ke Liu <liuke94@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: phy: DP83822: enable rgmii mode if phy_interface_is_rgmiiTommaso Merciai1-1/+8
RGMII mode can be enable from dp83822 straps, and also writing bit 9 of register 0x17 - RMII and Status Register (RCSR). When phy_interface_is_rgmii rgmii mode must be enabled, same for contrary, this prevents malconfigurations of hw straps References: - https://www.ti.com/lit/gpn/dp83822i p66 Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Suggested-by: Alberto Bianchi <alberto.bianchi@amarulasolutions.com> Tested-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: phy: adin: add support for clock outputJosua Mayer1-0/+40
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. SyncE should be configured dynamically at runtime, however Linux does not currently have a toggle for this, so support is explicitly omitted. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer<josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net: phy: marvell: Add errata section 5.1 for Alaska PHYLeszek Polak1-0/+37
As per Errata Section 5.1, if EEE is intended to be used, some register writes must be done once after every hardware reset. This patch now adds the necessary register writes as listed in the Marvell errata. Without this fix we experience ethernet problems on some of our boards equipped with a new version of this ethernet PHY (different supplier). The fix applies to Marvell Alaska 88E1510/88E1518/88E1512/88E1514 Rev. A0. Signed-off-by: Leszek Polak <lpolak@arri.de> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220516070859.549170-1-sr@denx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-16net: phy: micrel: Use the kszphy probe/suspend/resumeFabio Estevam1-2/+3
Now that it is possible to use .probe without having .driver_data, let KSZ8061 use the kszphy specific hooks for probe,suspend and resume, which is preferred. Switch to using the dedicated kszphy probe/suspend/resume functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-2-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16net: phy: micrel: Allow probing without .driver_dataFabio Estevam1-5/+6
Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13net: phy: smsc: Cope with hot-removal in interrupt handlerLukas Wunner1-1/+3
If reading the Interrupt Source Flag register fails with -ENODEV, then the PHY has been hot-removed and the correct response is to bail out instead of throwing a WARN splat and attempting to suspend the PHY. The PHY should be stopped in due course anyway as the kernel asynchronously tears down the device. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: phy: smsc: Cache interrupt maskLukas Wunner1-13/+11
Cache the interrupt mask to avoid re-reading it from the PHY upon every interrupt. This will simplify a subsequent commit which detects hot-removal in the interrupt handler and bails out. Analyzing and debugging PHY transactions also becomes simpler if such redundant reads are avoided. Last not least, interrupt overhead and latency is slightly improved. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-10 14:12:46 +0000