summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/marvell10g.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01net: phy: Replace phy driver features u32 with link_mode bitmapAndrew Lunn1-10/+1
This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add phydev_warn()Andrew Lunn1-3/+3
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04net: phy: marvell10g: add thermal hwmon deviceRussell King1-2/+182
Add a thermal monitoring device for the Marvell 88x3310, which updates once a second. We also need to hook into the suspend/resume mechanism to ensure that the thermal monitoring is reconfigured when we resume. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net: phy: Fix spelling mistake: "advertisment"-> "advertisement"Colin Ian King1-1/+1
Trivial fix to spelling mistake in comments and error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net: phy: marvell10g: Utilize gen10g_no_soft_reset()Florian Fainelli1-10/+1
We do the same thing as the generic function: nothing, so utilize it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-02net: phy: marvell10g: add support for half duplex 100M and 10MRussell King1-25/+12
Add support for half-duplex 100M and 10M copper connections by parsing the advertisment results rather than trying to decode the negotiated speed from one of the PHYs "vendor" registers. This allows us to decode the duplex as well, which means we can support half-duplex mode for the slower speeds. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: clean up interface mode switchingRussell King1-16/+20
Centralise the PHY interface mode switching, rather than having it in two places. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: add MDI swap reportingRussell King1-0/+31
Add reporting of the MDI swap to the Marvell 10G PHY driver by providing a generic implementation for the standard 10GBASE-T pair swap register and polarity register. We also support reading the MDI swap status for 1G and below from a PCS register. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: update header commentsRussell King1-1/+7
Update header comments to indicate the newly found behaviour with XAUI interfaces. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net: phy: marvell10g: remove XGMII as an option for 88x3310Russell King1-1/+0
Remove XGMII as an option for the 88x3310 PHY driver, as the PHY doesn't support XGMII's 32-bit data lanes. It supports USXGMII, which is not XGMII, but a single-lane serdes interface - see https://developer.cisco.com/site/usgmii-usxgmii/ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28net: phy: marvell10g: fix the PHY id maskAntoine Tenart1-2/+3
The Marvell 10G PHY driver supports different hardware revisions, which have their bits 3..0 differing. To get the correct revision number these bits should be ignored. This patch fixes this by using the already defined MARVELL_PHY_ID_MASK (0xfffffff0) instead of the custom 0xffffffff mask. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Suggested-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY supportRussell King1-0/+368
Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310). This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only supports Clause 45 accesses. The PHY appears (based on the vendor IDs) to be two different vendors IP, with each devad containing several instances. This PHY driver has only been tested with the RJ45 copper port, fiber port and a Marvell Armada 8040-based ethernet interface. It should be noted that to use the full range of speeds, MAC drivers need to also reconfigure the link mode as per phydev->interface, since the PHY automatically changes its interface mode depending on the negotiated speed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 05:37:32 +0000