summaryrefslogtreecommitdiffstats
path: root/drivers/net/pcs
AgeCommit message (Collapse)AuthorFilesLines
2022-09-05net: pcs: add new PCS driver for altera TSE PCSMaxime Chevallier3-0/+182
The Altera Triple Speed Ethernet has a SGMII/1000BaseC PCS that can be integrated in several ways. It can either be part of the TSE MAC's address space, accessed through 32 bits accesses on the mapped mdio device 0, or through a dedicated 16 bits register set. This driver allows using the TSE PCS outside of altera TSE's driver, since it can be used standalone by other MACs. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: pcs: xpcs: propagate xpcs_read error to xpcs_get_state_c37_sgmiiVladimir Oltean1-1/+1
While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state() does check for a non-zero return code from xpcs_get_state_c37_sgmii() and prints that as a message to the kernel log. However, a non-zero return code from xpcs_read() is translated into "return false" (i.e. zero as int) and the I/O error is therefore not printed. Fix that. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01net: pcs: rzn1-miic: update speed only if interface is changedClément Léger1-5/+16
As stated by Russel King, miic_config() can be called as a result of ethtool setting the configuration while the link is already up. Since the speed is also set in this function, it could potentially modify the current speed that is set. This will only happen if there is no PHY present and we aren't using fixed-link mode. Handle that by storing the current interface mode in the miic_port structure and update the speed only if the interface mode is going to be changed. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220629122003.189397-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29net: pcs-rzn1-miic: fix return value check in miic_probe()Yang Yingliang1-2/+2
On failure, devm_platform_ioremap_resource() returns a ERR_PTR() value and not NULL. Fix return value checking by using IS_ERR() and return PTR_ERR() as error value. Fixes: 7dc54d3b8d91 ("net: pcs: add Renesas MII converter driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220628131259.3109124-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net: pcs: add Renesas MII converter driverClément Léger3-0/+529
Add a PCS driver for the MII converter that is present on the Renesas RZ/N1 SoC. This MII converter is reponsible for converting MII to RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to reuse it in both the switch driver and the stmmac driver. Currently, this driver only allows the PCS to be used by the dual Cortex-A7 subsystem since the register locking system is not used. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: pcs: xpcs: depends on PHYLINK in KconfigJakub Kicinski1-2/+2
This is yet another attempt at fixing: >> ERROR: modpost: "phylink_mii_c22_pcs_encode_advertisement" [drivers/net/pcs/pcs_xpcs.ko] undefined! >> ERROR: modpost: "phylink_mii_c22_pcs_decode_state" [drivers/net/pcs/pcs_xpcs.ko] undefined! Switch XPCS to be invisible, as Russell points out it's "selected" by its consumers. Drop the dependency on MDIO_BUS as "depends" is meaningless on "selected" symbols. Reported-by: kernel test robot <lkp@intel.com> Fixes: b47aec885bcd ("net: pcs: xpcs: add CL37 1000BASE-X AN support") Link: https://lore.kernel.org/netdev/20220620201915.1195280-1-kuba@kernel.org/ Link: https://lore.kernel.org/r/20220622083521.0de3ea5c@kernel.org/ Link: https://lore.kernel.org/r/20220623202933.2341938-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: pcs: lynx: consolidate sgmii and 1000base-x config codeRussell King (Oracle)1-35/+21
Consolidate lynx_pcs_config_1000basex() and lynx_pcs_config_sgmii() into a single function. The differences between these two are: - The value that the link timer is set to. - The value of the IF_MODE register. Everything else is identical. This patch depends on "net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()". Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22net: pcs: lynx: use mdiodev accessorsRussell King (Oracle)1-20/+10
Use the recently introduced mdiodev accessors for the lynx PCS. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1o3Zd8-002yHI-G2@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-19net: pcs: pcs-xpcs: use mii_bmcr_encode_fixed()Russell King (Oracle)1-17/+1
Use the newly introduced mii_bmcr_encode_fixed() for the xpcs driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17net: pcs: xpcs: add CL37 1000BASE-X AN supportOng Boon Leong2-1/+170
For CL37 1000BASE-X AN, DW xPCS does not support C22 method but offers C45 vendor-specific MII MMD for programming. We also add the ability to disable Autoneg (through ethtool for certain network switch that supports 1000BASE-X (1000Mbps and Full-Duplex) but not Autoneg capability. v4: Fixes to comment from Russell King. Thanks! https://patchwork.kernel.org/comment/24894239/ Make xpcs_modify_changed() as private, change to use mdiodev_modify_changed() for cleaner code. v3: Fixes to issues spotted by Russell King. Thanks! https://patchwork.kernel.org/comment/24890210/ Use phylink_mii_c22_pcs_decode_state(), remove unnecessary interrupt clearing and skip speed & duplex setting if AN is enabled. v2: Fixes to issues spotted by Russell King in v1. Thanks! https://patchwork.kernel.org/comment/24826650/ Use phylink_mii_c22_pcs_encode_advertisement() and implement C45 MII ADV handling since IP only support C45 access. Tested-by: Emilio Riva <emilio.riva@ericsson.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105Ong Boon Leong1-3/+3
xpcs_config() has 'advertising' input that is required for C37 1000BASE-X AN in later patch series. So, we prepare xpcs_do_config() for it. For sja1105, xpcs_do_config() is used for xpcs configuration without depending on advertising input, so set to NULL. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-02net: pcs: pcs-xpcs: Convert to mdiobus_c45_readAndrew Lunn1-4/+2
Stop using the helpers to construct a special mdio address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-01-26net: stmmac/xpcs: convert to pcs_validate()Russell King (Oracle)1-16/+11
stmmac explicitly calls the xpcs driver to validate the ethtool linkmodes. This is no longer necessary as phylink now supports validation through a PCS method. Convert both drivers to use this new mechanism. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: xpcs: add support for retrieving supported interface modesRussell King (Oracle)1-0/+14
Add a function to the xpcs driver to retrieve the supported PHY interface modes, which can be used by drivers to fill in phylink's supported_interfaces mask. We validate the interface bit index to ensure that it fits within the bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry. Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: pcs: lynx: use a common naming scheme for all lynx_pcs variablesColin Foster1-7/+7
pcs-lynx.c used lynx_pcs and lynx as a variable name within the same file. This standardizes all internal variables to just "lynx" Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcsColin Foster1-4/+20
Remove references to lynx_pcs structures so drivers like the Felix DSA can reference alternate PCS drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson1-1/+1
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06net: pcs: xpcs: fix incorrect steps on disable EEEWong Vee Khee1-4/+9
When Energy-Efficient Ethernet(EEE) is disable from the MAC side, we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1 register. Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: pcs: xpcs: fix incorrect CL37 AN sequenceWong Vee Khee1-5/+27
According to Synopsys DesignWare Cores Ethernet PCS databook, it is required to disable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 0 if it is already enabled, before programming various fields of VR_MII_AN_CTRL registers. After all these programming are done, it is then required to enable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17net: update NXP copyright textVladimir Oltean1-1/+1
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16net: pcs: xpcs: Add Pause Mode support for SGMII and 2500BaseXWong Vee Khee1-0/+4
SGMII/2500BaseX supports Pause frame as defined in the IEEE802.3x Flow Control standardization. Add this as a supported feature under the xpcs_sgmii_features struct. Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11net: pcs: xpcs: fix error handling on failed to allocate memoryWong Vee Khee1-1/+1
Drivers such as sja1105 and stmmac that call xpcs_create() expects an error returned by the pcs-xpcs module, but this was not the case on failed to allocate memory. Fixed this by returning an -ENOMEM instead of a NULL pointer. Fixes: 3ad1d171548e ("net: dsa: sja1105: migrate to xpcs for SGMII") Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210810085812.1808466-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-17net: pcs: xpcs: Fix a less than zero u16 comparison errorColin Ian King1-6/+6
Currently the check for the u16 variable val being less than zero is always false because val is unsigned. Fix this by using the int variable for the assignment and less than zero check. Addresses-Coverity: ("Unsigned compared against 0") Fixes: f7380bba42fd ("net: pcs: xpcs: add support for NXP SJA1110") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: export xpcs_do_config and xpcs_link_upVladimir Oltean1-4/+6
The sja1105 hardware has a quirk in that some changes require a switch reset, which loses all configuration. When the reset is initiated, everything needs to be reprogrammed, including the MACs and the PCS. This is currently done in sja1105_static_config_reload() - we manually call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and sja1105_sgmii_pcs_force_speed() which are all internal functions. There is a desire for sja1105 to use the common xpcs driver, and that means that the equivalents of those functions, xpcs_do_config() and xpcs_link_up() respectively, will no longer be local functions. Forcing phylink to retrigger a resolve somehow, say by doing dev_close() followed by dev_open() is not really an option, because the CPU port might have a PCS as well, and there is no net device which we can close and reopen for that. Additionally, the dev_close/dev_open sequence might force a renegotiation of the copper-side link for SGMII ports connected to a PHY, and this is undesirable as well, because the switch reset is much quicker than a PHY autoneg, so we would have a lot more downtime. The only solution I see is for the sja1105 driver to keep doing what it's doing, and that means we need to export the equivalents from xpcs for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call them directly in sja1105_static_config_reload(). This will be done during the conversion patch. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for NXP SJA1110Vladimir Oltean3-0/+192
The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it manages it through the register space of the XPCS itself, in a small register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e. This coincides with where the registers for the default Synopsys PMA are, but the register definitions are of course not the same. This situation is an odd hardware quirk, but the simplest way to manage it is to drive the SJA1110's PMA from within the XPCS driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for NXP SJA1105Vladimir Oltean4-3/+52
The NXP SJA1105 DSA switch integrates a Synopsys SGMII XPCS on port 4. The generic code works fine, except there is an integration issue which needs to be dealt with: in this switch, the XPCS is integrated with a PMA that has the TX lane polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain normal non-inverted behavior, the TX lane polarity must be inverted in the PCS, via the DIGITAL_CONTROL_2 register. We introduce a pma_config() method in xpcs_compat which is called by the phylink_pcs_config() implementation. Also, the NXP SJA1105 returns all zeroes in the PHY ID registers 2 and 3. We need to hack up an ad-hoc PHY ID (OUI is zero, device ID is 1) in order for the XPCS driver to recognize it. This PHY ID is added to the public include/linux/pcs/pcs-xpcs.h for that reason (for the sja1105 driver to be able to use it in a later patch). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: also ignore phy id if it's all onesVladimir Oltean1-2/+4
xpcs_get_id() searches multiple MMDs for a known PHY ID, starting with MDIO_MMD_PCS (3). However not all integrators might have implemented that MMD on their MDIO bus. For example, the NXP SJA1105 and SJA1110 switches only implement vendor-specific MMD 1 and 2. When there is nothing on an MDIO bus at a certain address, traditionally the bus returns 0xffff, which means that the bus remained in its default pull-up state for the duration of the MDIO transaction. The 0xffff value is widely used in drivers/net/phy/phy_device.c (see get_phy_c22_id for example) to denote a missing device. So it makes sense for the xpcs to ignore this value as well, and continue its search, eventually finding the proper PHY ID in the vendor-specific MMDs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for sgmii with no inband ANVladimir Oltean1-3/+38
In fixed-link use cases, the XPCS can disable the clause 37 in-band autoneg process, disable the "Automatic Speed Mode Change after CL37 AN" setting, and force operation in a speed dictated by management. Add support for this operating mode. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: move register bit descriptions to a header fileVladimir Oltean2-96/+104
Vendors which integrate the Designware XPCS might modify a few things here and there, and to support those, it's best to create separate C files in order to not clutter up the main pcs-xpcs.c. Because the vendor files might want to access the common xpcs registers too, let's move them in a header file which is local to this driver and can be included by vendor files as appropriate. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: rename mdio_xpcs_args to dw_xpcsVladimir Oltean1-37/+36
The struct mdio_xpcs_args is reminiscent of when a similarly named struct mdio_xpcs_ops existed. Now that that is removed, we can shorten the name to dw_xpcs (dw for DesignWare). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: pcs: add 2500BASEX support for Intel mGbE controllerVoon Weifeng1-0/+56
XPCS IP supports 2500BASEX as PHY interface. It is configured as autonegotiation disable to cater for PHYs that does not supports 2500BASEX autonegotiation. v2: Add supported link speed masking. v3: Restructure to introduce xpcs_config_2500basex() used to configure the xpcs for 2.5G speeds. Added 2500BASEX specific information for configuration. v4: Fix indentation error Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: convert to phylink_pcs_opsVladimir Oltean1-39/+60
Since all the remaining members of struct mdio_xpcs_ops have direct equivalents in struct phylink_pcs_ops, it is about time we remove it altogether. Since the phylink ops return void, we need to remove the error propagation from the various xpcs methods and simply print an error message where appropriate. Since xpcs_get_state_c73() detects link faults and attempts to reset the link on its own by calling xpcs_config(), but xpcs_config() now has a lot of phylink arguments which are not needed and cannot be simply fabricated by anybody else except phylink, the actual implementation has been moved into a smaller xpcs_do_config(). The const struct mdio_xpcs_ops *priv->hw->xpcs has been removed, so we need to look at the struct mdio_xpcs_args pointer now as an indication whether the port has an XPCS or not. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: convert to mdio_deviceVladimir Oltean1-11/+42
Unify the 2 existing PCS drivers (lynx and xpcs) by doing a similar thing on probe, which is to have a *_create function that takes a struct mdio_device * given by the caller, and builds a private PCS structure around that. This changes stmmac to hold only a pointer to the xpcs, as opposed to the full structure. This will be used in the next patch when struct mdio_xpcs_ops is removed. Currently a pointer to struct mdio_xpcs_ops is used as a shorthand to determine whether the port has an XPCS or not. We can do the same now with the mdio_xpcs_args pointer. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: use mdiobus_c45_addr in xpcs_{read,write}Vladimir Oltean1-2/+2
Use the dedicated helper for abstracting away how the clause 45 address is packed in reg_addr. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: export xpcs_probeVladimir Oltean1-2/+2
Similar to the other recently functions, it is not necessary for xpcs_probe to be a function pointer, so export it so that it can be called directly. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: export xpcs_config_eeeVladimir Oltean1-3/+3
There is no good reason why we need to go through: stmmac_xpcs_config_eee -> stmmac_do_callback -> mdio_xpcs_ops->config_eee -> xpcs_config_eee when we can simply call xpcs_config_eee. priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is done that way because the mdio_bus_data pointer might or might not be populated in all stmmac instantiations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: export xpcs_validateVladimir Oltean1-7/+4
Calling a function pointer with a single implementation through struct mdio_xpcs_ops is clunky, and the stmmac_do_callback system forces this to return int, even though it always returns zero. Simply remove the "validate" function pointer from struct mdio_xpcs_ops and replace it with an exported xpcs_validate symbol which is called directly by stmmac. priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is done that way because the mdio_bus_data pointer might or might not be populated in all stmmac instantiations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: make the checks related to the PHY interface mode statelessVladimir Oltean1-62/+113
The operating mode of the driver is currently to populate its struct mdio_xpcs_args::supported and struct mdio_xpcs_args::an_mode statically in xpcs_probe(), based on the passed phy_interface_t, and work with those. However this is not the operation that phylink expects from a PCS driver, because the port might be attached to an SFP cage that triggers changes of the phy_interface_t dynamically as one SFP module is unpluggged and another is plugged. To migrate towards that model, the struct mdio_xpcs_args should not cache anything related to the phy_interface_t, but just look up the statically defined, const struct xpcs_compat structure corresponding to the detected PCS OUI/model number. So we delete the "supported" and "an_mode" members of struct mdio_xpcs_args, and add the "id" structure there (since the ID is not expected to change at runtime). Since xpcs->supported is used deep in the code in _xpcs_config_aneg_c73(), we need to modify some function headers to pass the xpcs_compat from all callers. In turn, the xpcs_compat is always supplied externally to the xpcs module: - Most of the time by phylink - In xpcs_probe() it is needed because xpcs_soft_reset() writes to MDIO_MMD_PCS or to MDIO_MMD_VEND2 depending on whether an_mode is clause 37 or clause 73. In order to not introduce functional changes related to when the soft reset is issued, we continue to require the initial phy_interface_t argument to be passed to xpcs_probe() so we can pass this on to xpcs_soft_reset(). - stmmac_open() wants to know whether to call stmmac_init_phy() or not, and for that it looks inside xpcs->an_mode, because the clause 73 (backplane) AN modes supposedly do not have a PHY. Because we moved an_mode outside of struct mdio_xpcs_args, this is now no longer directly possible, so we introduce a helper function xpcs_get_an_mode() which protects the data encapsulation of the xpcs module and requires a phy_interface_t to be passed as argument. This function can look up the appropriate compat based on the phy_interface_t. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net: pcs: xpcs: there is only one PHY IDVladimir Oltean1-51/+78
The xpcs driver has an apparently inadequate structure for the actual hardware it drives. These defines and the xpcs_probe() function would suggest that there is one PHY ID per supported PHY interface type, and the driver simply validates whether the mode it should operate in (the argument of xpcs_probe) matches what the hardware is capable of: #define SYNOPSYS_XPCS_USXGMII_ID 0x7996ced0 #define SYNOPSYS_XPCS_10GKR_ID 0x7996ced0 #define SYNOPSYS_XPCS_XLGMII_ID 0x7996ced0 #define SYNOPSYS_XPCS_SGMII_ID 0x7996ced0 #define SYNOPSYS_XPCS_MASK 0xffffffff but that is not the case, because upon closer inspection, all the above 4 PHY ID definitions are in fact equal. So it is the same XPCS that is compatible with all 4 sets of PHY interface types. This change introduces an array of struct xpcs_compat which is populated by the single struct xpcs_id instance. It also eliminates the bogus defines for multiple Synopsys XPCS PHY IDs and replaces them with a single XPCS_ID, which better reflects the way in which the hardware operates. Because we are touching this area of the code anyway, the new array of struct xpcs_compat, as well as the array of xpcs_id, have been moved towards the end of the file, since they are variable declarations not definitions. If whichever of struct xpcs_compat or struct xpcs_id need to gain a function pointer member in the future, it is easier to reference functions (no forward declarations needed) if we have the const variable declarations at the end of the file. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: pcs: Introducing support for DWC xpcs Energy Efficient EthernetMichael Sit Wei Hong1-0/+51
Add DWC xpcs EEE support callbacks.The callback function is used to set EEE registers on xpcs. xpcs transparent mode is enabled to allow PHY to detect MAC EEE status. Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15net: pcs: add C37 SGMII AN support for intel mGbE controllerOng Boon Leong1-1/+166
XPCS IP supports C37 SGMII AN process and it is used in intel multi-GbE controller as MAC-side SGMII. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15net: pcs: rearrange C73 functions to prepare for C37 support laterOng Boon Leong1-28/+66
The current implementation for XPCS is validated for C73, so we rename them to have _c73 suffix and introduce a set of functions to use an_mode flag to switch between C73 and C37 AN later. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-06net: pcs: add pcs-lynx 1000BASE-X supportRussell King1-0/+36
Add support for 1000BASE-X to pcs-lynx for the LX2160A. This commit prepares the ground work for allowing 1G fiber connections to be used with DPAA2 on the SolidRun CEX7 platforms. Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16net: pcs-xpcs: depend on MDIO_BUS instead of selecting itIoana Ciornei1-2/+1
The below compile time error can be seen when PHYLIB is configured as a module. ld: drivers/net/pcs/pcs-xpcs.o: in function `xpcs_read': pcs-xpcs.c:(.text+0x29): undefined reference to `mdiobus_read' ld: drivers/net/pcs/pcs-xpcs.o: in function `xpcs_soft_reset.constprop.7': pcs-xpcs.c:(.text+0x80): undefined reference to `mdiobus_write' ld: drivers/net/pcs/pcs-xpcs.o: in function `xpcs_config_aneg': pcs-xpcs.c:(.text+0x318): undefined reference to `mdiobus_write' ld: pcs-xpcs.c:(.text+0x38e): undefined reference to `mdiobus_write' ld: pcs-xpcs.c:(.text+0x3eb): undefined reference to `mdiobus_write' ld: pcs-xpcs.c:(.text+0x437): undefined reference to `mdiobus_write' ld: drivers/net/pcs/pcs-xpcs.o:pcs-xpcs.c:(.text+0xb1e): more undefined references to `mdiobus_write' follow PHYLIB being a module leads to MDIO_BUS being a module as well while the XPCS is still built-in. What should happen in this configuration is that PCS_XPCS should be forced to build as module. However, that select only acts in the opposite way so we should turn it into a depends. Fix this up by explicitly depending on MDIO_BUS. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Fixes: 2fa4e4b799e1 ("net: pcs: Move XPCS into new PCS subdirectory") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-24net: pcs-lynx: add support for 10GBASERIoana Ciornei1-0/+6
Add support in the Lynx PCS module for the 10GBASE-R mode which is only used to get the link state, since it offers a single fixed speed. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phy: add Lynx PCS moduleIoana Ciornei3-0/+319
Add a Lynx PCS module which exposes the necessary operations to drive the PCS using phylink. The majority of the code is extracted from the Felix DSA driver, which will be also modified in a later patch, and exposed as a separate module for code reusability purposes. As such, this aims at feature and bug parity with the existing Felix DSA driver, and thus USXGMII, SGMII, QSGMII and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS module since these were also supported by Felix. The module can only be enabled by the drivers in need and not user selectable. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: pcs: Move XPCS into new PCS subdirectoryAndrew Lunn3-0/+736
Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the new directory. Move the header file into a subdirectory include/linux/pcs Start a naming convention of all PCS files use the prefix pcs-, and rename the XPCS files to fit. v2: Add include/linux/pcs v4: Fix include path in stmmac. Remove PCS_DEVICES to avoid new prompts Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>