summaryrefslogtreecommitdiffstats
path: root/drivers/net/mlx4
AgeCommit message (Collapse)AuthorFilesLines
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-183/+1520
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
2011-03-24mlx4_en: Removing HW info from ethtool -i report.Yevgeny Petrilin1-14/+1
Avoiding abuse of ethtool_drvinfo.driver field. HW specific info can be retrieved using lspci. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: updated driver version to 1.5.4.1Yevgeny Petrilin1-2/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Using blue flame supportYevgeny Petrilin3-22/+64
Doorbell is used according to usage of BlueFlame. For Blue Flame to work in Ethernet mode QP number should have 0 at bits 6,7. Allocating range of QPs accordingly. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_core: reserve UARs for userspace consumersEli Cohen1-0/+8
Do not allow a kernel consumer to allocate a UAR to serve for blue flame if the number of available UARs gets below MLX4_NUM_RESERVED_UARS (currently 8). This will allow userspace apps to open a device file and run things like ibv_devinfo. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_core: maintain available field in bitmap allocatorEli Cohen2-0/+15
Add mlx4_bitmap_avail() to give the number of available resources. We want to use this as a hint to whether to allocate a resources or not. This patch is introduced to be used with allocation blue flame registers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add blue flame support for kernel consumersEli Cohen3-0/+128
Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Enabling new steeringYevgeny Petrilin8-58/+291
The mlx4_en module now uses the new steering mechanism. The RX packets are now steered through the MCG table instead of Mac table for unicast, and default entry for multicast. The feature is enabled through INIT_HCA Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add support for promiscuous mode in the new steering model.Yevgeny Petrilin3-11/+620
For Ethernet mode only, When we want to register QP as promiscuous, it must be added to all the existing steering entries and also to the default one. The promiscuous QP might also be on of "real" QPs, which means we need to monitor every entry to avoid duplicates and ensure we close an entry when all it has is promiscuous QPs. Same mechanism both for unicast and multicast. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin5-36/+85
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin3-1/+19
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Wake on LAN supportYevgeny Petrilin5-2/+89
The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: using new mlx4 interrupt schemeYevgeny Petrilin5-23/+62
Each RX ring will have its own interrupt vector, and TX rings will share one (we mostly use polling for TX completions). The vectors are assigned first time device is opened, and its name includes the interface name and ring number. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Changing interrupt schemeYevgeny Petrilin5-13/+126
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: bringing link up when registering netdeviceYevgeny Petrilin1-0/+17
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: optimize adaptive moderation algorithm for better latencyYevgeny Petrilin2-13/+6
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: moderation parameters are not reseted.Yevgeny Petrilin1-2/+1
Instead of reseting the module parameters each ifup or mtu change, they are being set once at device initialization Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: going out of range of TX rings when reporting statsYevgeny Petrilin1-1/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22IB: Increase DMA max_segment_size on Mellanox hardwareDavid Dillow1-0/+3
By default, each device is assumed to be able only handle 64 KB chunks during DMA. By giving the segment size a larger value, the block layer will coalesce more S/G entries together for SRP, allowing larger requests with the same sg_tablesize setting. The block layer is the only direct user of it, though a few IOMMU drivers reference it as well for their *_map_sg coalescing code. pci-gart_64 on x86, and a smattering on on sparc, powerpc, and ia64. Since other IB protocols could potentially see larger segments with this, let's check those: - iSER is fine, because you limit your maximum request size to 512 KB, so we'll never overrun the page vector in struct iser_page_vec (128 entries currently). It is independent of the DMA segment size, and handles multi-page segments already. - IPoIB is fine, as it maps each page individually, and doesn't use ib_dma_map_sg(). - RDS appears to do the right thing and has no dependencies on DMA segment size, but I don't claim to have done a complete audit. - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they doesn't care about the coalescing. - Lustre's ko2iblnd does not care about coalescing -- it properly walks the returned sg list. This patch ups the value on Mellanox hardware to 1 GB, which matches reported firmware limits on mlx4. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28mlx4_core: Add ConnectX-3 device IDsYevgeny Petrilin1-0/+15
...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-12IB/mlx4: Handle protocol field in multicast tableAleksey Senin1-10/+13
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)Roland Dreier3-5/+6
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits) cxgb4vf: recover from failure in cxgb4vf_open() netfilter: ebtables: make broute table work again netfilter: fix race in conntrack between dump_table and destroy ah: reload pointers to skb data after calling skb_cow_data() ah: update maximum truncated ICV length xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC ehea: Increase the skb array usage net/fec: remove config FEC2 as it's used nowhere pcnet_cs: add new_id tcp: disallow bind() to reuse addr/port net/r8169: Update the function of parsing firmware net: ppp: use {get,put}_unaligned_be{16,32} CAIF: Fix IPv6 support in receive path for GPRS/3G arp: allow to invalidate specific ARP entries net_sched: factorize qdisc stats handling mlx4: Call alloc_etherdev to allocate RX and TX queues net: Add alloc_netdev_mqs function caif: don't set connection request param size before copying data cxgb4vf: fix mailbox data/control coherency domain race qlcnic: change module parameter permissions ...
2011-01-10mlx4_core: Avoid vunmap() of invalid pointer if allocation failsAli Ayoub1-1/+2
Signed-off-by: Ali Ayoub <ali@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10mlx4_core: Remove warning message about firmware bugRoland Dreier1-3/+1
The kernel warning message added in commit 58d74bb1d9f7 ("mlx4_core: Workaround firmware bug in query dev cap") about mlx4 reporting the wrong number of "blue flame registers" doesn't really help anyone, since the firmware bug is known and fixed and the bug is pretty much harmless to users. So just get rid of the warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10mlx4: Call alloc_etherdev to allocate RX and TX queuesTom Herbert1-1/+2
Changed driver to call alloc_etherdev_mqs so that the number of TX and RX queues can be set to correct values in the netdev device. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02Merge branch 'for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Fix information leak in marshalling code IB/pack: Remove some unused code added by the IBoE patches IB/mlx4: Fix IBoE link state IB/mlx4: Fix IBoE reported link rate mlx4_core: Workaround firmware bug in query dev cap IB/mlx4: Fix memory ordering of VLAN insertion control bits MAINTAINERS: Update NetEffect entry
2010-12-01mlx4_core: Workaround firmware bug in query dev capEli Cohen1-0/+4
ConnectX firmware is supposed to report the number blue flame registers per page as log2 of the value. However, due to a firmware bug, it reports actual number. This patch works around this by checking if the number of registers calculated fits within a page. If it does not, we use 8 registers per page. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds3-29/+12
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) ehea: Fixing statistics bonding: Fix lockdep warning after bond_vlan_rx_register() tunnels: Fix tunnels change rcu protection caif-u5500: Build config for CAIF shared mem driver caif-u5500: CAIF shared memory mailbox interface caif-u5500: CAIF shared memory transport protocol caif-u5500: Adding shared memory include drivers/isdn: delete double assignment drivers/net/typhoon.c: delete double assignment drivers/net/sb1000.c: delete double assignment qlcnic: define valid vlan id range qlcnic: reduce rx ring size qlcnic: fix mac learning ehea: fix use after free inetpeer: __rcu annotations fib_rules: __rcu annotates ctarget tunnels: add __rcu annotations net: add __rcu annotations to protocol ipv4: add __rcu annotations to routes.c qlge: bugfix: Restoring the vlan setting. ...
2010-10-26Merge branch 'for-linus' of ↵Linus Torvalds9-9/+71
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
2010-10-26Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', ↵Roland Dreier9-9/+71
'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next
2010-10-25mlx4_en: Fix out of bounds array accessEli Cohen1-0/+11
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25IB/mlx4: Add VLAN support for IBoEEli Cohen3-0/+30
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_en: Change multicast promiscuous mode to support IBoEEli Cohen2-3/+4
Change multicast promiscuous mode to pass packets through the multicast group distribution table before sending packets that miss to the default multicast QP. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_core: Update data structures and constants for IBoEEli Cohen1-1/+2
Add fields to hardware data structures and add new constants required for IBoE support. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_core: Allow protocol drivers to find corresponding interfacesEli Cohen2-3/+33
Add a mechanism for mlx4 protocol drivers to get a pointer to other drivers's device objects. For this, an exported function, mlx4_get_protocol_dev() is added, which allows a driver to get some other driver's device based on the protocol that the driver implements. Two protocols are added: MLX4_PROTOCOL_IB and MLX4_PROTOCOL_EN. This will be used in mlx4 IBoE support so that mlx4_ib can find the corresponding mlx4_en netdev. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and rename a few things. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24mlx4: make functions local and remove dead code.stephen hemminger2-29/+1
Make the following function static: mlx4_UNMAP_ICM Remove the following unused function: mlx4_MAP_ICM_page Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross1-2/+2
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28mlx4_core: Allow log_mtts_per_seg up to 7Eli Cohen1-2/+2
As there are now machines with a lot more physical memory, we need to be able to register more memory. This patch lifts the upper limit of log_mtts_per_seg from 5 to 7, increasing the amount of memory that can be registered. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-27mlx4_en: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings1-1/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26drivers/net: return operator cleanupEric Dumazet1-1/+1
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Fixed Ethtool statistics reportYevgeny Petrilin2-2/+2
The values didn't match the title after removing the LRO statistics in commit fa37a9586f92051de03a13e55e5ec3880bb6783e Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Consider napi_get_frags() failure.Yevgeny Petrilin1-0/+2
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-28mlx4: use bitmap libraryAkinobu Mita1-11/+4
Replace loops calling set_bit() and clear_bit() with bitmap_set() and bitmap_clear(). Unlike loops calling set_bit() and clear_bit(), bitmap_set() and bitmap_clear() are not atomic. But this is ok. Because the bitmap operations are protected by bitmap->lock except for initialization of the bitmap in mlx4_bitmap_init(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fix build warning in mlx4_en_create_rx_ring.David S. Miller1-2/+0
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’: drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: updated driver versionYevgeny Petrilin1-2/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Moving to work with GROYevgeny Petrilin5-113/+17
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: UDP RSS supportYevgeny Petrilin6-11/+24
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: reconfiguring mac address.Yevgeny Petrilin2-0/+7
When Mac address is removed from one port of the CX2 device, the other device should reconfigure its Mac. This fixes an issue with failover, when both ports have the same Mac address, and one of the ports, is closed, the second one stops receiving traffic. (bugzilla #1965 at bugs.openfabrics.org) Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: get/set ringsize uses actual ring sizeYevgeny Petrilin1-5/+6
In case that the rings were not fully filled, the report in Ethtool should be according to the actual size that was filled. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-14 11:22:30 +0000