summaryrefslogtreecommitdiffstats
path: root/drivers/net/mlx4/main.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11mlx4: Move the Mellanox driverJeff Kirsher1-1529/+0
Moves the Mellanox driver into drivers/net/ethernet/mellanox/ and make the necessary Kconfig and Makefile changes. CC: Roland Dreier <roland@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-03mlx4: Fixing Ethernet unicast packet steeringYevgeny Petrilin1-0/+2
For older FW versions, fixing the usage of per port Mac table. For each port we must define the base QP number, which is passed to the HW. Setting the correct value in SET_PORT FW command to enable the steering. Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds1-5/+53
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/qib: Defer HCA error events to tasklet mlx4_core: Bump the driver version to 1.0 RDMA/cxgb4: Use printk_ratelimited() instead of printk_ratelimit() IB/mlx4: Support PMA counters for IBoE IB/mlx4: Use flow counters on IBoE ports IB/pma: Add include file for IBA performance counters definitions mlx4_core: Add network flow counters mlx4_core: Fix location of counter index in QP context struct mlx4_core: Read extended capabilities into the flags field mlx4_core: Extend capability flags to 64 bits IB/mlx4: Generate GID change events in IBoE code IB/core: Add GID change event RDMA/cma: Don't allow IPoIB port space for IBoE RDMA: Allow for NULL .modify_device() and .modify_port() methods IB/qib: Update active link width IB/qib: Fix potential deadlock with link down interrupt IB/qib: Add sysfs interface to read free contexts IB/mthca: Remove unnecessary read of PCI_CAP_ID_EXP IB/qib: Remove double define IB/qib: Remove unnecessary read of PCI_CAP_ID_EXP ...
2011-07-18mlx4_core: Add network flow countersOr Gerlitz1-0/+53
ConnectX devices support a set of flow counters that can be attached to a set containing one or more QPs. Each such counter tracks receive and transmit packets and bytes of these QPs. This patch queries the device to check support for counters, handles initialization of the HCA to enable counters, and initializes a bitmap allocator to control counter allocations. Derived from patch by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18mlx4_core: Read extended capabilities into the flags fieldOr Gerlitz1-5/+0
Query another dword containing up to 32 extended device capabilities and merge it into struct mlx4_caps.flags. Update the code that handles the current extended device capabilities (e.g UDP RSS, WoL, vep steering, etc) to use the extended device cap flags field instead of a field per extended capability. Initial patch done by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-06-27mlx4: use pci_dev->revisionSergei Shtylyov1-2/+2
Commit 725c89997e03d71b09ea3c17c997da0712b9d835 (mlx4_en: Reporting HW revision in ethtool -i) added code to read the revision ID from the PCI configuration register while it's already stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... While at it, move the code being changed a bit in order to not break the initialization sequence. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07mlx4: Sensing link type at device initializationYevgeny Petrilin1-0/+5
When bringing the port up, performing a SENSE_PORT command To try and check to which physical link type (IB or Ethernet) the physical port is connected. In case there is no valid link partner, the port will come up as its supported default. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-4/+115
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
2011-03-23mlx4: Add blue flame support for kernel consumersEli Cohen1-0/+31
Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add support for promiscuous mode in the new steering model.Yevgeny Petrilin1-1/+62
For Ethernet mode only, When we want to register QP as promiscuous, it must be added to all the existing steering entries and also to the default one. The promiscuous QP might also be on of "real" QPs, which means we need to monitor every entry to avoid duplicates and ensure we close an entry when all it has is promiscuous QPs. Same mechanism both for unicast and multicast. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin1-0/+2
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin1-0/+2
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Wake on LAN supportYevgeny Petrilin1-0/+1
The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Changing interrupt schemeYevgeny Petrilin1-3/+17
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22IB: Increase DMA max_segment_size on Mellanox hardwareDavid Dillow1-0/+3
By default, each device is assumed to be able only handle 64 KB chunks during DMA. By giving the segment size a larger value, the block layer will coalesce more S/G entries together for SRP, allowing larger requests with the same sg_tablesize setting. The block layer is the only direct user of it, though a few IOMMU drivers reference it as well for their *_map_sg coalescing code. pci-gart_64 on x86, and a smattering on on sparc, powerpc, and ia64. Since other IB protocols could potentially see larger segments with this, let's check those: - iSER is fine, because you limit your maximum request size to 512 KB, so we'll never overrun the page vector in struct iser_page_vec (128 entries currently). It is independent of the DMA segment size, and handles multi-page segments already. - IPoIB is fine, as it maps each page individually, and doesn't use ib_dma_map_sg(). - RDS appears to do the right thing and has no dependencies on DMA segment size, but I don't claim to have done a complete audit. - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they doesn't care about the coalescing. - Lustre's ko2iblnd does not care about coalescing -- it properly walks the returned sg list. This patch ups the value on Mellanox hardware to 1 GB, which matches reported firmware limits on mlx4. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28mlx4_core: Add ConnectX-3 device IDsYevgeny Petrilin1-0/+15
...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-12mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)Roland Dreier1-1/+1
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-26Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
2010-09-28mlx4_core: Allow log_mtts_per_seg up to 7Eli Cohen1-2/+2
As there are now machines with a lot more physical memory, we need to be able to register more memory. This patch lifts the upper limit of log_mtts_per_seg from 5 to 7, increasing the amount of memory that can be registered. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-24mlx4_en: UDP RSS supportYevgeny Petrilin1-0/+1
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixing report in Ethtool get_settingsYevgeny Petrilin1-0/+4
The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Added self diagnostics test implementationYevgeny Petrilin1-0/+1
The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15drivers/net/mlx4: Use %pV, pr_<level>, printk_onceJoe Perches1-11/+5
Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-19sysfs: fix sysfs lockdep warning in mlx4 codeGreg Kroah-Hartman1-0/+1
This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-23Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06mlx4_core: Fix cleanup in __mlx4_init_one() error pathEli Cohen1-1/+1
If mlx4_init_port_info() fails, cleanup the initialized ports only. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-14mlx4_core: Add a new supported 40 GigE device IDEli Cohen1-0/+1
Add MT26438 (ConnectX EN 40GigE PCIe 2.0 5GT/s) to the list of supported devices. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07mlx4_core: Add 40GigE device IDYevgeny Petrilin1-0/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Avoid double free_icmsYevgeny Petrilin1-1/+1
On the error path of mlx4_init_hca(), mlx4_close_hca() is called, followed by mlx4_free_icms() and mlx4_UNMAP_FA(). But both those functions are also called from mlx4_close_hca(), which leads to a double free. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Allocate and map sufficient ICM memory for EQ contextRoland Dreier1-3/+6
The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Use pci_request_regions()Roland Dreier1-18/+8
The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06mlx4_core: Add new ConnectX EN PCI ID 0x6764Yevgeny Petrilin1-0/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06mlx4_core: Handle multi-physical function devicesYevgeny Petrilin1-1/+4
MT26468 (PCI ID 0x6764) devices can expose multiple physical functions. The current driver only handles the primary physical function. For other functions, the QUERY_FW firmware command will fail with the CMD_STAT_MULTI_FUNC_REQ error code. Don't try to drive such devices, but print a message saying the driver is skipping those devices rather than just "QUERY_FW command failed." Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> [ Rather than keeping unsupported devices bound to the driver, simply print a more informative error message and exit - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27mlx4_core: Add module parameter for number of MTTs per segmentEli Cohen1-2/+12
The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-21mlx4_core: Fix memory leak in mlx4_enable_msi_x()Nicolas Morey-Chaisemartin1-1/+1
When the msi_x option is enabled but pci_enable_msix() fails (not enough vectors are available etc), the entries array was not freed on the error path. Signed-off-by: Nicolas Morey-Chaisemartin <nicolas.morey-chaisemartin@ext.bull.net> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang1-2/+2
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang1-2/+2
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-18mlx4_core: Add link type autosensingYevgeny Petrilin1-27/+77
When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27mlx4_core: Add device IDs for MT25458 10GigE devicesJack Morgenstein1-0/+2
Add device IDs for Mellanox MT25458 ConnectX+10GBaseT 10GigE adapters. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-09mlx4_core: Fix warning from min()Roland Dreier1-2/+2
Recent cpumask changes changed num_possible_cpus() from returning an int to returning an unsigned int. This means that doing min(num_possible_cpus(), <int expression>) now produces a warning like drivers/net/mlx4/main.c: In function 'mlx4_enable_msi_x': drivers/net/mlx4/main.c:915: warning: comparison of distinct pointer types lacks a cast Fix this by using min_t(int, ...). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22mlx4_core: Add support for multiple completion event vectorsYevgeny Petrilin1-14/+39
When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-28mlx4_core: Save/restore default port IB capability maskJack Morgenstein1-0/+8
Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as <https://bugs.openfabrics.org/show_bug.cgi?id=1183>, which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Add Ethernet PCI device IDsYevgeny Petrilin1-0/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Multiple port type supportYevgeny Petrilin1-6/+205
Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Ethernet MAC/VLAN managementYevgeny Petrilin1-0/+14
Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Get ethernet MTU and default address from firmwareYevgeny Petrilin1-1/+3
Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Support multiple pre-reserved QP regionsYevgeny Petrilin1-6/+56
For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-25mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver filesJack Morgenstein1-1/+1
Update existing Mellanox copyright lines to 2008, and add such lines to files where they are missing. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 22:06:09 +0000